Jardón-Pérez, L.E.;                     González-Morales, D.R.;                     Trápaga, G.;                     González-Rivera, C.;                     RamÃrez-Argáez, M.A.    
        Effect of Differentiated Injection Ratio, Gas Flow Rate, and Slag Thickness on Mixing Time and Open Eye Area in Gas-Stirred Ladle Assisted by Physical Modeling. Metals 2019, 9, 555.
    https://doi.org/10.3390/met9050555
    AMA Style
    
                                Jardón-Pérez LE,                                 González-Morales DR,                                 Trápaga G,                                 González-Rivera C,                                 RamÃrez-Argáez MA.        
                Effect of Differentiated Injection Ratio, Gas Flow Rate, and Slag Thickness on Mixing Time and Open Eye Area in Gas-Stirred Ladle Assisted by Physical Modeling. Metals. 2019; 9(5):555.
        https://doi.org/10.3390/met9050555
    
    Chicago/Turabian Style
    
                                Jardón-Pérez, Luis E.,                                 Daniel R. González-Morales,                                 Gerardo Trápaga,                                 Carlos González-Rivera,                                 and Marco A. RamÃrez-Argáez.        
                2019. "Effect of Differentiated Injection Ratio, Gas Flow Rate, and Slag Thickness on Mixing Time and Open Eye Area in Gas-Stirred Ladle Assisted by Physical Modeling" Metals 9, no. 5: 555.
        https://doi.org/10.3390/met9050555
    
    APA Style
    
                                Jardón-Pérez, L. E.,                                 González-Morales, D. R.,                                 Trápaga, G.,                                 González-Rivera, C.,                                 & RamÃrez-Argáez, M. A.        
        
        (2019). Effect of Differentiated Injection Ratio, Gas Flow Rate, and Slag Thickness on Mixing Time and Open Eye Area in Gas-Stirred Ladle Assisted by Physical Modeling. Metals, 9(5), 555.
        https://doi.org/10.3390/met9050555