Next Article in Journal
Effect of Pre-Weld Heat Treatment on the Microstructure and Properties of Coarse-Grained Heat-Affected Zone of a Wind Power Steel after Simulated Welding
Next Article in Special Issue
The Optimization of the Synthesis of Antibacterial Coatings on Ti6Al4V Coupons Obtained by Electron Beam Melting
Previous Article in Journal
Predictive Modelling and Optimization of the Mechanical Properties of Laser-Coated NB/SiC/Ni Welds Using an ANFIS
Previous Article in Special Issue
Comparison of STP and TP Modes of Wire and Arc Additive Manufacturing of Aluminum–Magnesium Alloys: Forming, Microstructures and Mechanical Properties
 
 
Article

Article Versions Notes

Metals 2024, 14(5), 586; https://doi.org/10.3390/met14050586
Action Date Notes Link
article xml file uploaded 17 May 2024 10:15 CEST Original file -
article xml uploaded. 17 May 2024 10:15 CEST Update https://www.mdpi.com/2075-4701/14/5/586/xml
article pdf uploaded. 17 May 2024 10:15 CEST Version of Record https://www.mdpi.com/2075-4701/14/5/586/pdf
article html file updated 17 May 2024 10:17 CEST Original file -
article html file updated 26 June 2025 00:54 CEST Update https://www.mdpi.com/2075-4701/14/5/586/html
Back to TopTop