Next Article in Journal
Microstructure and Properties of Non-Equiatomic Ni10Cr6WFe9TiAlx High-Entropy Alloys Combined with High Strength and Toughness
Next Article in Special Issue
Electrical Equivalent Circuit Model Prediction of High-Entropy Alloy Behavior in Aggressive Media
Previous Article in Journal
Development and Research of New Hybrid Composites in Order to Increase Reliability and Durability of Structural Elements
Previous Article in Special Issue
Novel Cast and Wrought Al-3Zn-3Mg-3Cu-Zr-Y(Er) Alloys with Improved Heat Resistance
 
 

Order Article Reprints

Journal: Metals, 2023
Volume: 13
Number: 1178

Article: Microstructure, Hardness, and Linear Reciprocating Sliding Wear Response of Directionally Solidified Al–(2.5, 3.5, 4.5)Cu–(0.25, 0.50)Cr Alloys
Authors: by Rafael V. Lantmann, André M. S. Mariante, Tiago V. Pinheiro, Eleani M. da Costa and Carlos A. dos Santos
Link: https://www.mdpi.com/2075-4701/13/7/1178

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop