Next Article in Journal
Experimental Investigation on Machinability of Titanium Alloy by Laser-Assisted End Milling
Next Article in Special Issue
Physicomechanical Nature of Acoustic Emission Preceding Wire Breakage during Wire Electrical Discharge Machining (WEDM) of Advanced Cutting Tool Materials
Previous Article in Journal
Using a Trial Sample on Stainless Steel 316L in a Direct Laser Deposition Process
Previous Article in Special Issue
Ceramic Cutting Materials and Tools Suitable for Machining High-Temperature Nickel-Based Alloys: A Review
 
 
Article

Article Versions Notes

Metals 2021, 11(10), 1551; https://doi.org/10.3390/met11101551
Action Date Notes Link
article xml file uploaded 29 September 2021 11:56 CEST Original file -
article xml uploaded. 29 September 2021 11:56 CEST Update https://www.mdpi.com/2075-4701/11/10/1551/xml
article pdf uploaded. 29 September 2021 11:56 CEST Version of Record https://www.mdpi.com/2075-4701/11/10/1551/pdf
article html file updated 29 September 2021 11:57 CEST Original file -
article html file updated 30 July 2022 08:22 CEST Update https://www.mdpi.com/2075-4701/11/10/1551/html
Back to TopTop