Next Article in Journal
Amphiphilic PTB7-Based Rod-Coil Block Copolymer for Water-Processable Nanoparticles as an Active Layer for Sustainable Organic Photovoltaic: A Case Study
Next Article in Special Issue
Effect of Reinforcements and 3-D Printing Parameters on the Microstructure and Mechanical Properties of Acrylonitrile Butadiene Styrene (ABS) Polymer Composites
Previous Article in Journal
Exploring the Impact of Chitosan Composites as Artificial Organs
Previous Article in Special Issue
Impact of Process Variables of Acetone Vapor Jet Drilling on Surface Roughness and Circularity of 3D-Printed ABS Parts: Fabrication and Studies on Thermal, Morphological, and Chemical Characterizations
 
 

Order Article Reprints

Journal: Polymers, 2022
Volume: 14
Number: 1586

Article: Multi-Parameter Optimization of 3D Printing Condition for Enhanced Quality and Strength
Authors: by Brandon Jackson, Kamran Fouladi and Babak Eslami
Link: https://www.mdpi.com/2073-4360/14/8/1586

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop