Next Article in Journal
Melt Rheological Behavior and Morphology of Poly(ethylene oxide)/Natural Rubber-graft-Poly(methyl methacrylate) Blends
Next Article in Special Issue
Shrinkage and Warpage Minimization of Glass-Fiber-Reinforced Polyamide 6 Parts by Microcellular Foam Injection Molding
Previous Article in Journal
Theoretical Insights into the Structures and Capacitive Performances of Confined Ionic Liquids
Previous Article in Special Issue
Influence of Heat Sink on the Mold Temperature of Gypsum Mold Used in Injection Molding
 
 
Article

Article Versions Notes

Polymers 2020, 12(3), 727; https://doi.org/10.3390/polym12030727
Action Date Notes Link
article xml file uploaded 24 March 2020 14:18 CET Original file -
article xml uploaded. 24 March 2020 14:18 CET Update https://www.mdpi.com/2073-4360/12/3/727/xml
article pdf uploaded. 24 March 2020 14:18 CET Version of Record https://www.mdpi.com/2073-4360/12/3/727/pdf
article html file updated 24 March 2020 14:20 CET Original file -
article html file updated 1 April 2020 10:39 CEST Update -
article html file updated 20 July 2022 23:52 CEST Update https://www.mdpi.com/2073-4360/12/3/727/html
Back to TopTop