The journal retracts the article, ”Laboratory Alignment Procedure for Improving Reproducibility of Tyre Wet Grip Measurement” [1], cited above, due to redundant publication with “Laboratory Alignment Procedure for Improving Reproducibility of Tyre Wet Grip Measurement” by Jeon, K., et al. [2] in the International Journal of Automotive Technology, where the authors submitted their work in 2016 after submitting to 28th International Electric Vehicle Symposium Exhibition (EVS28) as a conference paper in 2015
The article is retracted from the World Electric Vehicle Journal and can henceforth be found under reference [2].
This retraction was approved by the Editor in Chief of the journal. The authors agreed to this retraction.
References
- Jeon, K.; Yoo, Y.; Lee, J.; Jung, D.; Lim, S.; Park, S. Laboratory Alignment Procedure for Improving Reproducibility of Tyre Wet Grip Measurement. World Electr. Veh. J. 2015, 7, 414–419. [Google Scholar] [CrossRef]
- Jeon, K.; Yoo, Y.; Lee, J.; Jung, D. Laboratory Alignment Procedure For Improving Reproducibility Of Tyre Wet Grip Measurement. Int. J. Automot. Technol. 2016, 17, 457–463. [Google Scholar] [CrossRef][Green Version]
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations. |
© 2021 by the author. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).