Next Article in Journal
Requirements for Electric Machine Design based on Operating Points from Real Driving Data in Cities
Next Article in Special Issue
Experimental Verification of Fault Tolerant Operation Focusing on DC-Bus Battery Failure in Dual Inverter Motor Drive
Previous Article in Journal
Automatic Longitudinal Regenerative Control of EVs Based on a Driver Characteristics-Oriented Deceleration Model
Previous Article in Special Issue
A Consideration on Maximum Efficiency of Resonant Circuit of Inductive Power Transfer System with Soft-Switching Operation
 
 
Article
Peer-Review Record

Design and Experimental Verification of Voltage Measurement Circuits Based on Linear Optocouplers with Galvanic Isolation for Battery Management Systems

World Electr. Veh. J. 2019, 10(4), 59; https://doi.org/10.3390/wevj10040059
by Borislav Dimitrov 1,*, Gordana Collier 1 and Andrew Cruden 2
Reviewer 1: Anonymous
Reviewer 2: Anonymous
World Electr. Veh. J. 2019, 10(4), 59; https://doi.org/10.3390/wevj10040059
Submission received: 20 July 2019 / Revised: 15 September 2019 / Accepted: 18 September 2019 / Published: 23 September 2019
(This article belongs to the Special Issue Power Electronics Subsystems)

Round 1

Reviewer 1 Report

The manuscript proposed a voltage measurement circuits based on linear optocouplers with galvanic isolation. The topic is of importance, and statements are supported by solid experiment design and analysis. I suggest publishing it. 

Author Response

Dear reviewer,
Thank you for the positive feedback. After one more edition, the paper will be re-submitted for publishing.
Best regard,
BorislavDimitrov

Reviewer 2 Report

The article requires a English revision.

The quality of figures is low and not acceptable.

The article is well detailed study of using optocouplers in BMS design for improved accuracy of measurements. The authors have provided detailed circuit diagrams and background of the experimental setup, which is a valuable addition to the literature.

Author Response

Dear reviewer,
Thank you for the positive feedback.
The figures which require edition will be improved in the final copy. Also, additional language revision has been done.
Best regard,
BorislavDimitrov

Back to TopTop