Next Article in Journal
Assessing the Impact of Shredded Polyethylene Terephthalate (PET) Post-Consumer Plastic as a Partial Replacement for Coarse Aggregates in Unreinforced Concrete
Next Article in Special Issue
Dynamic Analysis and Vibration Control of Additively Manufactured Thin-Walled Polylactic Acid Polymer (PLAP) and PLAP Composite Beam Structures: Numerical Investigation and Experimental Validation
Previous Article in Journal
A Case Study on the Possibility of Extending the Service Life of the Demining Machine Belt
Previous Article in Special Issue
Fractional Talbot Lithography for Predesigned Large-Area Liquid-Crystal Alignment
 
 

Order Article Reprints

Journal: Materials, 2024
Volume: 17
Number: 5207

Article: Notch Effect in Acrylonitrile Styrene Acrylate (ASA) Single-Edge-Notch Bending Specimens Manufactured by Fused Filament Fabrication
Authors: by Sergio Cicero, Fabrizia Devito, Marcos Sánchez, Sergio Arrieta and Borja Arroyo
Link: https://www.mdpi.com/1996-1944/17/21/5207

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop