Next Article in Journal
Evaluation of the Potential of Metakaolin, Electric Arc Furnace Slag, and Biomass Fly Ash for Geopolymer Cement Compositions
Next Article in Special Issue
Investigation of the Mechanical Properties and Microstructure of the Co40NiCrMo Alloy Used for STACERs and Prepared by the CSPB Process and the Winding and Stabilization Method
Previous Article in Journal
One-Pot Fabrication of Nanocomposites Composed of Carbon Nanotubes and Alumina Powder Using a Rotatable Chemical Vapor Deposition System
Previous Article in Special Issue
Rheological Behavior of the A356 Alloy in the Semisolid State at Low Shear Rates
 
 

Order Article Reprints

Journal: Materials, 2023
Volume: 16
Number: 2742

Article: Investigation of the Hot Stamping-in-Die Quenching Composite Forming Process of 5083 Aluminum Alloy Skin
Authors: by Lingling Yi, Ge Yu, Ziming Tang, Xin Li and Zhengwei Gu
Link: https://www.mdpi.com/1996-1944/16/7/2742

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop