Next Article in Journal
Effects of a New Type of Grinding Wheel with Multi-Granular Abrasive Grains on Surface Topography Properties after Grinding of Inconel 625
Next Article in Special Issue
Surface Topography Description after Turning Inconel 718 with a Conventional, Wiper and Special Insert Made by the SPS Technique
Previous Article in Journal
Effect of Ga2O3 Dopant on High Speed Sintered 5 mol% Y2O3 Stabilized Dental Zirconia
Previous Article in Special Issue
Surface Topography Description of Threads Made with Turning on Inconel 718 Shafts
 
 

Order Article Reprints

Journal: Materials, 2023
Volume: 16
Number: 715

Article: Investigation of the Influence of Anti-Wear Coatings on the Surface Quality and Dimensional Accuracy during Finish Turning of the Inconel 718 Alloy
Authors: by Krzysztof Smak, Piotr Szablewski, Stanisław Legutko, Bartłomiej Krawczyk and Edward Miko
Link: https://www.mdpi.com/1996-1944/16/2/715

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop