Next Article in Journal
Stress Intensity Factor Assessment for the Reinforcement of Cracked Steel Plates Using Prestressed or Non-Prestressed Adhesively Bonded CFRP
Next Article in Special Issue
A Comparative Study on the Structure and Quality of SLM and Cast AISI 316L Samples Subjected to WEDM Processing
Previous Article in Journal
Spicy Bitumen: Curcumin Effects on the Rheological and Adhesion Properties of Asphalt
Previous Article in Special Issue
Yttrium’s Effect on the Hot Cracking and Creep Properties of a Ni-Based Superalloy Built Up by Additive Manufacturing
 
 

Order Article Reprints

Journal: Materials, 2021
Volume: 14
Number: 1623

Article: Cutting Forces and Tool Wear Investigation during Turning of Sintered Nickel-Cobalt Alloy with CBN Tools
Authors: by Wojciech Zębala, Grzegorz Struzikiewicz and Ksenia Rumian
Link: https://www.mdpi.com/1996-1944/14/7/1623

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop