Order Article Reprints

George J, Abdelghani A, Bahoumina P, Tantot O, Baillargeat D, Frigui K, Bila S, Hallil H, Dejous C. CNT-Based Inkjet-Printed RF Gas Sensor: Modification of Substrate Properties during the Fabrication Process. Sensors. 2019; 19(8):1768. https://doi.org/10.3390/s19081768

George, Julien, Aymen Abdelghani, Prince Bahoumina, Olivier Tantot, Dominique Baillargeat, Kamel Frigui, Stéphane Bila, Hamida Hallil, and Corinne Dejous. 2019. "CNT-Based Inkjet-Printed RF Gas Sensor: Modification of Substrate Properties during the Fabrication Process" Sensors 19, no. 8: 1768. https://doi.org/10.3390/s19081768

George, J., Abdelghani, A., Bahoumina, P., Tantot, O., Baillargeat, D., Frigui, K., Bila, S., Hallil, H., & Dejous, C. (2019). CNT-Based Inkjet-Printed RF Gas Sensor: Modification of Substrate Properties during the Fabrication Process. Sensors, 19(8), 1768. https://doi.org/10.3390/s19081768