Search Results (379)

Water scarcity poses a formidable challenge around the world, especially in arid regions where limited availability of freshwater resources threatens both human well-being and ecosystem sustainability. Membrane-based desalination technologies offer a viable solution to address this issue by providing access to clean water. This work ultimately aims to develop a novel permselective polymeric membrane material to be employed in an electrochemical desalination system. This part of the study addresses the optimization, preparation, and characterization of a polyvinylidene difluoride (PVDF) polymeric membrane using the electrospinning technique. The membranes produced in this work were fabricated under specific operational, environmental, and material parameters. Five different additives and nano-additives, i.e., graphene oxide (GO), carbon nanotubes (CNTs), zinc oxide (ZnO), activated carbon (AC), and a zeolitic imidazolate metal–organic framework (ZIF-8), were used to modify the functionality and selectivity of the prepared PVDF membranes. Each membrane was synthesized at two different levels of additive composition, i.e., 0.18 wt.% and 0.45 wt.% of the entire PVDF polymeric solution. The physiochemical properties of the prepared membranes were characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), zeta potential, contact angle, conductivity, porosity, and pore size distribution. Based on findings of this study, PVDF/GO membrane exhibited superior results, with an electrical conductivity of 5.611 mS/cm, an average pore size of 2.086 µm, and a surface charge of −38.33 mV. Full article

The electrocatalytic CO₂ reduction reaction (CO₂RR) offers an energy-saving and environmentally friendly approach to producing hydrocarbon fuels. The use of a gas diffusion electrode (GDE) flow cell has generally improved the rate of CO₂RR, while the gas diffusion layer (GDL) remains a significant challenge. In this study, we successfully engineered a novel metal–organic framework (MOF) heterojunction through the controlled coating of zeolitic imidazolate framework (ZIF-L) on ultrathin nickel—metal–organic framework (Ni-MOF) nanosheets. This innovative architecture simultaneously integrates GDL functionality and exposes abundant solid–liquid–gas triple-phase boundaries. The resulting Ni-MOF@ZIF-L heterostructure demonstrates exceptional performance, achieving a formate Faradaic efficiency of 92.4% while suppressing the hydrogen evolution reaction (HER) to 6.7%. Through computational modeling of the optimized heterojunction configuration, we further elucidated its competitive adsorption behavior and electronic modulation effects. The experimental and theoretical results demonstrate an improvement in electrochemical CO₂ reduction activity with suppressed hydrogen evolution for the heterojunction because of its hydrophobic interface, good electron transfer capability, and high CO₂ adsorption at the catalyst interface. This work provides a new insight into the rational design of porous crystalline materials in electrocatalytic CO₂RR. Full article

Given the adverse effects of organic dyes from aqueous solutions on human physiology and the ecological system, establishing an effective system for their elimination is imperative. This study employs the in situ thermal (IST) method to synthesize nanocomposites comprising zeolitic imidazole frameworks, specifically Fe-ZIF-8 and Fe-ZIF-67. The investigation offers a comprehensive evaluation of the properties of these nano-adsorbents for the removal of malachite green (MG). The results indicate a significantly increased adsorption capacity of up to 495 and 552 mg g⁻¹ for Fe-ZIF-8 and Fe-ZIF-67, respectively. Furthermore, they demonstrate removal efficiencies of up to 90% and 95% for MG, respectively. Parameters associated with the adsorption process are derived from isotherms and removal kinetics, specifically the Freundlich model and the pseudo-second-order kinetics model, respectively. The enhanced adsorption capacity observed in Fe-ZIF-8 and Fe-ZIF-67 can be attributed to π–π stacking interactions, hydrogen bonding, and electrostatic attraction. After undergoing three cycles, both adsorbents consistently exhibit a high removal efficiency of approximately 85%, indicating notable structural integrity and outstanding potential for repeated use. The examined adsorbents display exceptional efficacy, favorable stability, and substantial specific surface area, underscoring their remarkable adsorption capabilities. The nanocomposites comprising Fe-ZIF-8 and Fe-ZIF-67 demonstrate considerable potential as highly favorable options for the elimination of MG and other cationic organic dyes from aqueous environments. Full article

Kasugamycin (KSM) is easily affected by photolysis, acid–base destruction, and oxidative decomposition in the natural environment, leading to its poor durability and low effective utilization rate, which affects its control effect on plant bacterial diseases. Nanomaterials modified with environment-responsive agents enable the control of the release of pesticides through intelligently responding to external stimuli, thereby improving efficacy and reducing environmental impact. In this study, a pH-responsive controlled release system was constructed using zeolitic imidazolate frameworks (ZIF-93) for the sustained and targeted delivery of KSM. The synthesized KSM@ZIF-93 exhibited a diameter of 63.93 ± 11.19 nm with a drug loading capacity of 20.0%. Under acidic conditions mimicking bacterial infection sites, the Schiff base bonds and coordination bonds in ZIF-93 dissociated, triggering the simultaneous release of KSM and Zn²⁺, achieving a synergistic antibacterial effect. Light stability experiments revealed a 34.81% reduction in UV-induced degradation of KSM when encapsulated in ZIF-93. In vitro antimicrobial assays demonstrated that KSM@ZIF-93 completely inhibited Erwinia amylovora at 200 mg/L and had better antibacterial activity and persistence than KSM and ZIF-93. The field experiment and safety evaluation showed that the control effect of KSM@ZIF-93 on pear fire blight at the concentration of 200 mg/L was (75.19 ± 3.63)% and had no toxic effect on pollen germination. This pH-responsive system not only enhances the stability and bioavailability of KSM but also provides a targeted and environmentally compatible strategy for managing bacterial infections during the flowering period of pear trees. Full article

Marine biofouling, the process of marine microorganisms, algae, and invertebrates attaching to and forming biofilms on ship hulls, underwater infrastructure, and marine equipment in ocean environments, severely impacts shipping and underwater operations by increasing fuel consumption, maintenance costs, and corrosion risks, and by threatening marine ecosystem stability via invasive species transport. This study reports the development of a hydrogel-metal-organic framework (MOF)-quorum sensing inhibitor (QSI) antifouling coating on 304 stainless steel (SS) substrates. Inspired by mussel adhesion, a hydrophilic bionic hydrogel was first constructed via metal ion coordination. The traditional metal ion source was replaced with a zeolitic imidazolate framework-8 (ZIF-8) loaded with 2-(5H)-furanone (HF, a QSI) without altering coating formation. Physicochemical characterization using Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), the Brunauer–Emmett–Teller (BET) method, and the diffraction of x-rays (XRD) confirmed successful HF loading into ZIF-8 with intact crystal structures. Antifouling tests showed HF@ZIF-8 enhanced antibacterial inhibition against Staphylococcus aureus (97.28%) and Escherichia coli (>97%) and suppressed Chromobacterium violaceum CV026 pigment synthesis at 0.25 mg/mL (sub-growth concentration). The reconstructed PG/PVP/PEI/HF@ZIF-8 coating achieved 72.47% corrosion inhibition via synergistic anodic protection and physical shielding. This work provides a novel green approach for surface antifouling and drag reduction, highlighting MOF-loaded QSIs as promising additives to enhance the antifouling performance of hydrogel coatings, anti-corrosion performance, and QSI performance for sustainable marine engineering applications. Full article

Background/Objectives: Diabetic retinopathy is an ocular disease caused by changes in the expression of inflammatory mediators and increased oxidative stress in the retina and is the leading cause of vision loss in diabetic patients. Currently, there is no treatment capable of reversing retinal damage, which represents a significant burden on the quality of life of patients. (1R)-1-Dodecylsulfonyl-5N,6O-oxomethylidenenojirimycin stands outs as a prototype of the sp²-iminoglycolipids family for its beneficial neuroprotective effect against this chronic eye disease. Critical issues related to the low solubility and bioavailability of this glycolipid in biological settings are overcome by its encapsulation in a Zeolitic-Imidazolate Framework (ZIF) structure, resulting in homogeneous and biocompatible GlycoZIF nanoparticles. Cell studies show an enhanced cellular uptake compared with the free glycolipid, and importantly, its bioactivity is preserved once released inside cells. Methods: Extensive in vitro and ex vivo assays with diabetic retinopathy models unveil the mechanistic pathways of the designed GlycoZIF. Results: A reduction in proinflammatory mediators, increased heme oxygenase-1 level, inhibition of NLRP3 inflammasome, and reduced reactive gliosis is shown. Conclusions: These findings demonstrate for the first time the potential of Glyco-modified ZIFs for the treatment of diabetes-related ocular problems by controlling the immune-mediated inflammatory response. Full article

Materials derived from metal–organic frameworks (MOFs) as MOF-derived oxides retain a highly porous and active structure from the MOF precursor, exhibiting excellent sensing properties. In addition, the tunable nature of MOFs allows the structural and chemical properties of the resulting oxides to be specifically tuned to enhance their performance as sensing materials. In this work, zinc-based MOF structures belonging to the family of zeolitic imidazolate frameworks (ZIFs) were synthesized, characterized and then subjected to a high-temperature calcination process to obtain the corresponding oxides. To improve sensing performance, various silver doping strategies (1 wt.%) were explored, specifically through a growth process and an impregnation process. Among these approaches, the oxide obtained via the growth process demonstrates superior performance, exhibiting a response 5.8 times higher than pristine ZnO when exposed to 80 ppm of ethanol at 300 °C in a humidity-controlled chamber. These results highlight the potential of silver doping via growth process as an effective strategy to enhance the sensing performance of MOF-derived ZnO. Full article

In recent years, transition metal-based catalytic materials have garnered considerable attention, particularly those exhibiting high catalytic efficiency toward both the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). In this work, a self-supporting ternary transition metal phosphide (CoFeNi_0.2P) with a hierarchical structure was synthesized using the Prussian blue analogue (PBA)/zeolitic imidazolate framework-L (ZIF-L) template. Benefiting from the hierarchical structure of the PBA/ZIF-L precursor and the electronic structure modulation induced by Ni doping, the resulting CoFeNi_0.2P demonstrates impressive bifunctional electrocatalytic activity. Specifically, in 1 M KOH electrolyte, the CoFeNi_0.2P catalyst requires an overpotential of only 88 mV to deliver 10 mA cm⁻² for the HER and 248 mV to achieve 50 mA cm⁻² for the OER. Moreover, it demonstrates satisfactory stability toward both the HER and OER. When integrated into a two-electrode electrolyzer, CoFeNi_0.2P enables a current density of 10 mA cm⁻² at a cell voltage of 1.59 V, maintaining robust performance for over 25 h. This study provides a feasible strategy for the rational design of hierarchical electrocatalysts for efficient overall water splitting. Full article

The increasing presence of pesticide residues in aquatic environments poses a significant threat to ecosystems and human health, necessitating the development of effective removal technologies. In this study, Zeolitic Imidazolate Framework-8 (ZIF-8) was investigated as adsorbent for Linuron, a widely used herbicide. The material was synthesized via a hydrothermal method and underwent thorough physico-chemical characterization, confirming its intrinsic properties. Adsorption experiments were conducted under systematically varied conditions using a Central Composite Face-Centered (CFC) experimental design, evaluating the effects of temperature, Linuron concentration, ionic strength on adsorption efficiency. The Response Surface Methodology (RSM) revealed that temperature and Linuron concentration were the most influential variables. A quadratic effect of ionic strength and a significant interaction between Linuron concentration and ionic strength were also observed. The fitted quadratic regression model exhibited excellent predictive performance (R² = 0.909; Q² = 0.755), and analysis of variance (ANOVA) confirmed its significance (p < 0.001) with a non-significant lack of fit. Maximum Linuron removal (>95%) was achieved at elevated temperature, moderate concentration, and intermediate ionic strength. These findings highlight the potential of ZIF-8 as a tunable and high-efficiency adsorbent for the remediation of pesticide-contaminated water, demonstrating the value of RSM-based optimization in designing adsorption processes. Full article

Water pollution, driven by industrial wastewater, agricultural runoff, and domestic sewage, introduces organic pollutants (e.g., dyes and antibiotics) and heavy metal ions (e.g., Pb²⁺ and Cr(VI)), threatening ecosystems and human health. Although traditional water treatment technologies have now matured, they still have some deficiencies in terms of specific pollutants. Metal–organic frameworks (MOFs), particularly zeolite imidazole frame-67 (ZIF-67)—a cobalt-based MOF with high surface area, tunable pores, and robust chemical stability—show excellent adsorption capacity for pollutants and have emerged as promising candidates for water treatment due to their efficacy in adsorption, catalysis, and photocatalysis. This review examines ZIF-67’s synthesis, functionalization strategies, and applications in removing organic pollutants and heavy metals. It explores its mechanisms, composite designs, and recyclability, while highlighting challenges and future directions for developing efficient, sustainable water treatment technologies. Full article

Gel electrolytes (GEs) play a pivotal role in the advancement of lithium metal batteries by offering high energy density and enhanced rate capability. Nevertheless, their real-world application is hampered by relatively low ionic conductivity and significant interfacial resistance at room temperatures. In this work, we developed a gel electrolyte membrane (GEM) by embedding Zeolitic Imidazolate Framework-8 (ZIF-8) metal–organic frameworks (MOFs) material into a poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) matrix through UV curing. The composite membrane, with 4 wt% ZIF-8, exhibited an ionic conductivity of 1.17 × 10⁻³ S/cm, an electrochemical stability window of 4.7 V, and a lithium-ion transference number of 0.7. The test results indicate that the electrochemical performance of LFP//GEM//Li battery has an initial specific capacity of 168 mAh g⁻¹ at 0.1 C rate. At 1 C, the discharge capacity was 88 mAh g⁻¹, and at 2 C, it was 68 mAh g⁻¹. Enhanced ionic transport, improved electrochemical stability, and optimized lithium-ion migration collectively contributed to superior rate performance and prolonged cycle life. This study offers novel insights and methodological advances for next-generation lithium metal batteries technologies. Full article

Food spoilage caused by microbial contamination remains a global challenge, driving demand for sustainable antibacterial packaging. Conventional photocatalytic materials suffer from limited spectral response, rapid charge recombination, and insufficient reactive oxygen species (ROS) generation under visible light. Here, a Z-scheme heterojunction was constructed by coupling zeolitic imidazolate framework-8 (ZIF-8) with Ag₃PO₄, achieving dual-spectral absorption and spatial charge separation. The directional electron transfer from Ag₃PO₄’s conduction band to ZIF-8 effectively suppresses electron-hole recombination, prolonging carrier lifetimes and amplifying ROS production (·O₂⁻/·OH). Synergy with Ag⁺ release further enhances bactericidal efficacy. Incorporated into a cellulose acetate matrix (CAM), the ZIF-8/Ag₃PO₄/CAM film demonstrates 99.06% antibacterial efficiency against meat surface microbiota under simulated sunlight, alongside high transparency. This study proposes a Z-scheme heterojunction strategy to maximize ROS generation efficiency and demonstrates a scalable fabrication approach for active food packaging materials, effectively targeting microbial contamination control and shelf-life prolongation. Full article

This study developed a highly facile method to synthesize Zn-decorated and nitrogen-doped hierarchical porous carbons for carbon dioxide (CO₂) adsorption. Zeolitic imidazolate framework-8 (ZIF-8) was used as the raw material, which was subjected to a thermal treatment to obtain ZIF-8-derived carbons (ZDCs) in order to develop nanocarbons with a stable framework structure, a high CO₂ adsorption capacity, and high selectivity under normal pressure. The crystallinity evolution of the samples changed from the typical ZIF-8 structure to having features of graphite carbons upon heating. The average particle sizes of the products were between 34 and 105 nm, and the specific surface areas ranged from 618 to 1862 m²/g. The nitrogen and zinc contents gradually decreased with increasing carbonization temperatures, but the changes in the distributions of the functional groups were different. The interactions between CO₂ and the ZDCs were significantly enhanced, resulting in a higher isosteric heat of adsorption. The ZIF-8 carbonized at 1123 K exhibited the highest CO₂ uptake, i.e., 3.57 mmol/g at 298 K and 101.3 kPa, while higher CO₂ uptakes at 15 kPa occurred on the ZIF-8 carbonized at 923 and 1023 K due to their high isosteric heat of adsorption of CO₂. The higher adsorption selectivity of Z8-650 for CO₂ over N₂ may be due to its higher V_<0.7nm/V_mi ratio and nitrogen and zinc contents. Consequently, the micropore area ratio and surface functional groups primarily determined the CO₂ adsorption capacity at 15 kPa. In addition, an appropriate metal Zn to Zn²⁺ ratio may have a positive effect on CO₂ adsorption. On the other hand, the ultramicropore volume ratio, micropore volume ratio, micropore area, and SSA played more significant roles at 101.3 kPa of pressure. Full article

Paper and cellulose-based materials are known for their sensitivity to humidity, which can create stresses among fibres and increase fragility. More importantly, humidity can lead to the formation of mould and stains, compromising both aesthetic value and long-term preservation, particularly for historical documents and books. This study explored the application of in situ prepared Zeolitic Imidazolate Framework (ZIF-8), a zinc-based MOF, on paper as a potential antimicrobial material. Hand-made and commercially printed papers were tested to assess the effective deposition and formation of the ZIF-8 network, with a focus on both visual appearance and physicochemical characteristics. X-ray fluorescence and diffraction, infrared spectroscopy, and scanning electron microscopy analysis confirmed the successful formation of the ZIF-8 network in all papers. The Zn content varied, as expected, depending on application time and paper characteristics. All treated papers exhibited minor variations in brilliance and showed slightly increased rigidity. The formation of white spots linked to Zn accumulation was observed, particularly in printed books where colourimetric and microscopic variations were more pronounced. Full article

In this study, a V₂O₃/carbon (V₂O₃/C) composite was synthesized using zeolitic imidazolate framework 8 (ZIF-8) as both a sacrificial template and in situ carbon source. The composite was prepared by mixing ZIF-8 with NH₄VO₃, followed by annealing at 800 °C, resulting in nanoscale V₂O₃ embedded in a nitrogen-doped porous carbon matrix. Fabricated into a thin-film cathode via alternating current electrophoretic deposition (AC-EPD), the composite exhibited mixed capacitive–diffusion-controlled charge storage behavior with favorable Zn²⁺ transport kinetics, as confirmed by a b-value analysis (b = 0.72) and diffusion coefficient measurements (D_Zn = 6.2 × 10⁻¹¹ cm²/s). Notably, the cathode displayed photoresponsive redox behavior under 450 nm illumination, enhancing the Zn-ion kinetics. These findings demonstrate the potential of MOF-derived V₂O₃/C composites for high-performance, photo-enhanced zinc-ion energy storage applications. Full article