Search Results (27)

This study chemically characterized three Pleurotus ostreatus fruiting bodies cultivated in the Iberian Peninsula under different conditions (biological and industrial), with emphasis on polysaccharide analysis. Comprehensive comparative data on cultivation-dependent nutritional variations will potentially improve their nutritional and therapeutic applications. Industrial mushrooms (POC and POA) contained significantly higher carbohydrate content (74%), while the biologically cultivated mushroom (POL) exhibited more protein (22.6%), fat (4.2%), and ashes (8.0%). Monosaccharide analysis showed glucose dominance (28.7–45.5%), with mannose, galactose, xylose, and arabinose also present. Trehalose was the primary free sugar (4.8–14.9%). The (1→3)(1→6)-β-glucans varied significantly across samples (POL: 20.5%; POC: 29.3%; POA: 34.3%). Nuclear magnetic resonance analysis suggested complex polysaccharide arrangements. Water-soluble carbohydrates and proteins showed molecular weight distributions of 0.18–21 kDa and 0.20–75 kDa, respectively. All mushrooms were rich in essential amino acids, phosphorus (2.79–3.07%), potassium (0.56–0.68%), linoleic acid (0.82–1.14%), and oleic acid (0.22–0.31%). Fourier transform infrared confirmed a mushroom-specific biochemical profile. These findings corroborate the high nutritional value of POL, POC, and POA, with a significant contribution to the daily requirements of fiber, protein, and minerals (phosphorus, potassium, magnesium, iron, zinc, copper, and selenium), making them suitable for functional foods and nutraceuticals with cultivation-dependent nutritional profiles. Full article

Bis-(o-dipheylphosphinophenyl)amine, a tridentate (PNP) chelating ligand, and several of their Rare Earth (RE) metal complexes, [bis-(o-dipheylphosphinophenyl)amido]-RER₂, {[(C₆H₅)₂P-o-(C₆H₄)]₂NMR₂ (R = -CH₂-o-(C₆H₄)NMe₂: M = Y, 1; Nd, 2; Gd, 3;), are prepared in high yields. When activated with the strong Lewis acid MMAO-7, all these complexes exhibit catalytic activity toward the polymerization of isoprene (IP) in non-protic hydrocarbons. While the Nd complex (2) showed moderate activity and stereoselectivity, the Y and Gd complexes (1 and 3) exhibited extremely high catalytic efficiency in IP homo-polymerization, and produced polyisoprene rubber (PI) with 95% to over 99% cis-1,4 stereoselectivity and narrow polydispersity indices (<2.0). Moreover, under industrially relevant conditions, complex 3 can catalyze IP to produce ultrahigh molecular weight PI (UHMW-PI, MW up to 1200–2600 kg/mol) rubber with a very narrow polydispersity index (PDI ca. 1.1–1.6), a high-performance elastomeric material mimic of natural rubber (NR). Full article

Background: Increased demand of the serological biomarker test (GastroPanel^®) in non-invasive diagnosis of gastric cancer (GC) risk conditions, i.e., atrophic gastritis (AG) and Helicobacter pylori (Hp) infection, prompted the design of GastroPanel^® Quick test (GPQT) (Biohit Oyj, Helsinki, Finland) for point-of-care (POC) settings. Objective: This study validated the diagnostic accuracy (DA) of GPQT in diagnosis of AG and Hp among gastroscopy referral patients. Methods: Altogether, 266 patients were enrolled among the consecutive gastroscopy referrals at the Department of Gastroenterology, Fortis Hospital (Punjab, India). All patients underwent gastroscopy with biopsies (n = 249) classified using the Updated Sydney System (USS) and finger prick blood sampling for GPQT testing. Results: Biopsy-confirmed AG was found in 15.3% (38/249) of the patients. The overall agreement between the GPQT and the USS classification was 71.4% (95% CI 65.4–77.0%), with the weighted kappa (κ_w) of 0.823 (95% CI 0.773–0.862). In ROC analysis for moderate/severe AG of the corpus (AGC) endpoint, AUC = 0.990 (95% CI 0.979–1.000) and AUC = 0.971 (95% CI 0.948–0.995) for PGI and PGI/PGII, respectively. Hp IgG Ab test detected biopsy-confirmed Hp with AUC = 0.836 (95% CI 0.783–0.889). Conclusions: The GPQT favourably competes in accuracy with the ELISA test version (unified-GP) in diagnosis of AG and Hp in patients referred for diagnostic gastroscopy. Full article

A study of carbonaceous species, polycyclic aromatic hydrocarbons (PAHs), and nitro-PAHs associated with PM_2.5 was conducted to assess their carcinogenic potential and associated health risks in the two main cities of the State of Morelos: Cuernavaca and Cuautla. The annual median concentrations in Cuernavaca of organic carbon (OC) and elemental carbon (EC) were 6.2 µg m⁻³ and 0.6 µg m⁻³, respectively, whereas in Cuautla, OC concentrations averaged 4.8 µg m⁻³ and EC 0.6 µg m⁻³. OC/EC ratios, total carbonaceous aerosols (TCA), primary (POC) and secondary organic carbon (SOC), as well as elemental carbon reactive (ECR) were estimated, also showing prevalence of primary emissions such as biomass burning. The seventeen PAHs recommended by the EPA and twelve nitro-PAHs were measured using gas chromatography–mass spectrometry. The annual median sum of PAHs was 9.7 ng m⁻³ in Cuernavaca and 11.2 ng m⁻³ in Cuautla, where carcinogenic high-molecular-weight compounds were the most dominant; the annual median sums of nitro-PAHs were 287 pg m⁻³ and 432 pg m⁻³, respectively. Diagnostic ratios were applied to identify potential sources of PAH emissions, suggesting that fuel combustion is the major contributor in both sites, followed by coal biomass burning and agricultural activities. The annual carcinogenic potential as benzo(a)pyrene equivalent was 2.2 ng m⁻³ for both sites. The lifetime excess cancer risk from PAH inhalation was estimated to range from 1.8 × 10⁻⁴ to 2 × 10⁻⁴ in Cuernavaca and from 1.5 × 10⁻⁴ to 2.2 × 10⁻⁴ in Cuautla, similar to values observed in other urban regions globally. Full article

Microplastics (MPs) pollution has become a global pollution problem, potentially affecting soil carbon cycling and structure stability in agricultural systems. However, the effects of MPs pollution on soil organic carbon fractions/transformation and soil aggregate stability remain unknown. Thus, a combination of one-year pot and short-term mineralized incubation experiments that involved a reference (CK, with no MPs), different concentrations (0.1, 1, and 2 w/w % polyethylene (PE)), and types (0.1 w/w % PE, polypropylene (PP), and polyvinyl chloride (PVC)) of MPs were carried out to investigate the effects on the soil aggregate stability and organic carbon mineralization after one year of adding MPs. The results showed that the size distribution of the soil partial aggregates varied significantly as affected by the MP concentration and type (p ˂ 0.05). Compared with 0.1% PE, significant increases in the MWD (mean weight diameter) and GMD (geometric mean diameter) of 2% PE of 27.22% and 32.73%, respectively, were detected. In addition, high concentrations (>1%) of PE significantly decreased the dissolved organic carbon (DOC) (p ˂ 0.05), whereas they significantly increased the stable carbon fractions including the particulate organic carbon (POC) and mineral-bound organic carbon (MOC) (p ˂ 0.01). Meanwhile, compared with the CK, both MP types and doses significantly decreased the soil organic carbon mineralization rate (SOCMR) and cumulative mineralization amount (CM) (p ˂ 0.001). Moreover, the MPs significantly increased the total PLFA (phospholipid fatty acid) by 261.9–438.8% (p ˂ 0.01), and the soil pH and total PLFA were the dominant factors that affected the SOCMR as affected by MPs. Thus, a high concentration (>1%) of PE significantly decreased the SOCMR by influencing the soil pH, TN, and macroaggregate (R_>0.25) content and microbial community composition. This study provided evidence of the feedback of MPs pollution on soil C dynamic and aggregates in cultivated soil in South China. Full article

Antibiotic therapy effectively addresses Escherichia coli-induced enteric diseases, but its excessive utilization results in microbial imbalance and heightened resistance. This study evaluates the therapeutic efficacy of orally administered poly (lactic-co-glycolic acid) (PLGA)-loaded antimicrobial peptide OH-CATH30 microspheres in murine bacterial enteritis. Mice were categorized into the healthy control group (CG), untreated model group (MG), OH-CATH30 treatment group (OC), PLGA-OH-CATH30 treatment group (POC), and gentamicin sulfate treatment group (GS). Except for the control group, all other experimental groups underwent Escherichia coli-induced enteritis, followed by a 5-day treatment period. The evaluation encompassed clinical symptoms, intestinal morphology, blood parameters, inflammatory response, and gut microbiota. PLGA-OH-CATH30 microspheres significantly alleviated weight loss and intestinal damage while also reducing the infection-induced increase in spleen index. Furthermore, these microspheres normalized white blood cell count and neutrophil ratio, suppressed inflammatory factors (IL-1β, IL-6, and TNF-α), and elevated the anti-inflammatory factor IL-10. Analysis of 16S rRNA sequencing results demonstrated that microsphere treatment increased the abundance of beneficial bacteria, including Phocaeicola vulgatus, in the intestinal tract while concurrently decreasing the abundance of pathogenic bacteria, such as Escherichia. In conclusion, PLGA-OH-CATH30 microspheres have the potential to ameliorate intestinal damage and modulate the intestinal microbiota, making them a promising alternative to antibiotics for treating enteric diseases induced by Escherichia coli. Full article

The availability of fossil energy is dwindling, so renewable fuels are the alternative choices, one of which is bioethanol. To increase the purity of the ethanol produced via the fermentation process, activated carbon (AC) was made from durian (Durio zibethinus) peel. The steps for making AC consist of carbonization (300 °C and 400 °C), chemical activation using phosphoric acid (10–40%), pyrolysis (700 °C and 800 °C), and neutralization. The results showed that the maximum surface area (326.72 m²/g) was obtained from 400 °C carbonization, 800 °C pyrolysis, and activation using a 40% phosphoric acid solution. Other characteristics are the surface area of 326.72 m²/g, pore radius of 1.04 nm, and total pore volume of 0.17 cc/g with phosphate residue in the form a P₂O₅ molecule of 3.47% by weight, with COOH, OH, CO, C=C, C=O, P-OC, and Fe-O groups with wavenumbers (cm⁻¹), respectively, of 3836, 3225, 2103, 1555, 1143, and 494. The AC also demonstrated the highest number of carbon (86.41%) upon detection using EDX, while XRF analysis verified an average carbon content of 94.45 wt%. The highest ethanol adsorption efficiency (%) and the lowest yield (%) of AC (%) were 90.01 ± 0.00 and 23.26 ± 0.01. This study shows that durian peel has great potential as the raw material for the activated carbon manufacture of ethanol adsorbents. Full article

X-ray tomography is often affected by noise and artifacts during the reconstruction process, such as detector offset, calibration errors, metal artifacts, etc. Conventional algorithms, including FDK and SART, are unable to satisfy the sampling theorem requirements for 3D reconstruction under sparse-view constraints, exacerbating the impact of noise and artifacts. This paper proposes a novel 3D reconstruction algorithm tailored to sparse-view cone-beam computed tomography (CBCT). Drawing upon compressed sensing theory, we incorporate the weighted Schatten p-norm minimization (WSNM) algorithm for 2D image denoising and the adaptive steepest descent projection onto convex sets (ASD-POCS) algorithm, which employs a total variation (TV) regularization term. These inclusions serve to reduce noise and ameliorate artifacts. Our proposed algorithm extends the WSNM approach into three-dimensional space and integrates the ASD-POCS algorithm, enabling 3D reconstruction with digital brain phantoms, clinical medical data, and real projections from our portable CBCT system. The performance of our algorithm surpasses traditional methods when evaluated using root mean square error (RMSE), peak signal-to-noise ratio (PSNR), and structural similarity index measure (SSIM) metrics. Furthermore, our approach demonstrates marked enhancements in artifact reduction and noise suppression. Full article

Porous organic cages (POCs) are a new subclass of porous materials, which are constructed from discrete cage molecules with permanent cavities via weak intermolecular forces. In this study, a novel chiral stationary phase (CSP) has been prepared by chemically binding a [4 + 6]-type chiral POC (C₁₂₀H₉₆N₁₂O₄) with thiol-functionalized silica gel using a thiol-ene click reaction and applied to HPLC separations. The column packed with this CSP presented good separation capability for chiral compounds and positional isomers. Thirteen racemates have been enantioseparated on this column, including alcohols, diols, ketones, amines, epoxides, and organic acids. Upon comparison with a previously reported chiral POC NC1-R-based column, commercial Chiralpak AD-H, and Chiralcel OD-H columns, this column is complementary to these three columns in terms of its enantiomeric separation; and can also separate some racemic compounds that cannot be separated by the three columns. In addition, eight positional isomers (iodoaniline, bromoaniline, chloroaniline, dibromobenzene, dichlorobenzene, toluidine, nitrobromobenzene, and nitroaniline) have also been separated. The influences of the injection weight and column temperature on separation have been explored. After the column has undergone multiple injections, the relative standard deviations (RSDs) for the retention time and selectivity were below 1.0 and 1.5%, respectively, indicating the good reproducibility and stability of the column for separation. This work demonstrates that POCs are promising materials for HPLC separation. Full article

In the last decade, additive manufacturing (AM) techniques have been progressively applied to the manufacturing of many mechanical components. Compared to traditional techniques, this technology is characterized by disruptive potential in terms of the complexity of the objects that can be produced. This opens new frontiers in terms of design flexibility, making it possible to create new components with optimized performances in terms of mechanical properties and weight. In this work, the focus is on a specific field of application: the development of novel porous media structures which can be the basis of advanced after-treatment systems for internal combustion engines. In particular, the possibility to design periodic open cellular structures (POCSs) that can be applied as catalytic substrates opens new perspectives in terms of flexibility and integrated functionalities. The present study investigates an innovative solution where the catalytic substrates are located in the pipes of the exhaust manifolds of a high-performance engine. A preliminary characterization of the pressure drop induced by the POCS structure is carried out, with a particular focus on the impact of the backpressure on the engine performances. Moreover, each POCS integrates an electrical circuit which is used to promote the heating of the device, with beneficial effects on the light-off of the catalytic reactions. An advanced CFD model is applied to evaluate the potential of the solution, comparing the pollutant conversion with that of the baseline configuration equipped with a standard after-treatment system solution. Full article

Prostate cancer (PCa) is one of the cancer types that most affects males worldwide and is among the highest contributors to cancer mortality rates. Therefore, there is an urgent need to find strategies to improve the diagnosis of PCa. Microtechnologies have been gaining ground in biomedical devices, with microfluidics and lab-on-chip systems potentially revolutionizing medical diagnostics. In this paper, it is shown that prostate-specific antigen (PSA) can be detected through an immunoassay performed in a microbead-based microfluidic device after being extracted and purified from a serum sample through an aqueous biphasic system (ABS). Given their well-established status as ABS components for successful bioseparations, ionic liquids (ILs) and polymers were used in combination with buffered salts. Using both IL-based and polymer-based ABS, it was demonstrated that it is possible to detect PSA in non-physiological environments. It was concluded that the ABS that performed better in extracting the PSA from serum were those composed of tetrabutylammonium chloride ([N₄₄₄₄]Cl) and tetrabutylphosphonium bromide ([P₄₄₄₄]Br), both combined with phosphate buffer, and constituted by polyethylene glycol with a molecular weight of 1000 g/mol (PEG1000) with citrate buffer. In comparison with the assay with PSA prepared in phosphate-buffered saline (PBS) or human serum in which no ABS-mediated extraction was applied, assays attained lower limits of detection after IL-based ABS-mediated extraction. These results reinforce the potential of this method in future point-of-care (PoC) measurements. Full article

Organic amendments have been widely confirmed to support soil health and agricultural sustainability. However, the effects and mechanisms of long-term organic amendments combined with chemical fertilizers on soil organic carbon (SOC) sequestration and soil macroaggregate formation are still unclear. Therefore, this study aimed to explore the interaction between soil carbon sequestration and soil agglomeration after 12 years of fertilization. Seven treatments within a field experiment were selected to conduct the research, including nitrogen (N) application by farmers, optimized N management, biochar and/or straw, manure, compost or biogas residue plus optimized N management. The results showed that the addition of organic materials significantly enhanced the SOC by 29.6–119.8% and 10.3–36.3% in 0–15 and 15–30 cm soil layers compared to N application by farmers, respectively. Meanwhile, the soil humus carbon pools in the 0–15 cm soil layer were increased by 14.7–205.2%, particularly humin carbon (HUC), which could be considered as a useful indicator of the soil carbon sequestration process. Among the organic materials, the addition of biochar was the most effective strategy due to its high aromatic carbon content that resisted biodegradation. The addition of organic materials also improved the soil labile carbon fractions, and the contents of microbial biomass carbon (MBC), dissolved organic carbon (DOC), particulate organic carbon (POC) and KMnO₄-oxidizable carbon (ROC) were enhanced by 120.5%, 92.3%, 217.2% and 85.5% on average, respectively, and the amount of exchangeable Ca²⁺ and Mg²⁺ cations and Fe and Al oxides in the soil increased significantly whilst the Na⁺ content declined in the 0–15 cm soil layer. These indicators showed a significant correlation with the mean weight diameter (MWD). Our results revealed that the addition of organic materials could be an effective management practice to promote soil carbon sequestration and soil macroaggregate formation in calcareous soil. Full article

A vertical pattern of fractionated polycyclic aromatic hydrocarbons (PAH) was studied in the Japan Basin in the Sea of Japan. The highest PAH concentration was found in the mesopelagic realm, possibly resulting from deep convection and/or subduction of intermediate water and its biogeochemical setting in the western Japan Basin. Using ²²⁶Ra and ²²⁸Ra as tracers revealed the PAH load in the open sea from the coastal polluted water. Dissolved PAHs (DPAH, fraction < 0.5 µm) were significantly prevalent particulate PAHs (PPAH, fraction > 0.5 µm) at all depths, associated with a predominance of dissolved organic carbon (DOC) over particulate organic carbon (POC). Hydrophobicity was more important for higher-molecular-weight PAHs to be distributed between particles and the solution, while the high K_oc of low-molecular-weight PAHs indicated that their partitioning was driven by other factors, such as adsorbing of soot particles. PPAH and DPAH profiles differed from the POC and DOC profiles; nevertheless, a positive moderate correlation was found for DPAH and DOC for depths below the epipelagic, suggesting the similarity of the mechanisms of input of dissolved organic matter and DPAH into the deep interior of the Sea of Japan. The PAH flux calculations showed that biological pumps and overturning circulation contribute almost equally to removing PAHs from the bathypelagic waters of the Japan Basin. Full article

The tridentate PNP ligand-supported rare-earth metal complexes, i.e., bis[o-diphenylphosphinophenyl]amido-Re-bis[o-dimethylaminobenzyl], [(Ph₂P-o-C₆H₄)₂N]Re[(CH₂-o-Me₂N(C₆H₄))₂]: (Re = Y, 1; Nd, 2; Gd, 3) were applied to isoprene polymerization. When activated with borate activator ([PhMe₂NH][B(C₆F₅)₄] (NH-BARF), catalysts 1 and 3 exhibited excellent catalytic efficiency in aromatic media, produced very-high to ultrahigh molecular weight (Mw over 130 × 10⁴ g/moL) polyisoprene rubber (PIR), and the obtained PIR contained over 98% cis-1,4 head-to-tail repeating unites. In most cases, the borate-activated polymerization reaction proceeded in a quasi-living pattern (PDI = 1.2–1.5) under controlled monomer conversion; whereas, activated with the commercially available modified methylaluminoxane (MMAO3A) in aliphatic hydrocarbon media, complexes 1, 2 and 3 all showed high catalytic efficiency, produced high molecular weight PIR with narrow molecular weight distribution (PDI ≤ 2.0) and high cis-1,4 head-to tail repeating unites in the range of 91–95%. Thus, the catalyst systems that consisted of 1, 2 and 3/MMAO3A, are closely relevant to the current industrial polybutadiene rubber (PBR) and PIR production processes. Full article

Point-of-care testing (POCT) devices are becoming increasingly popular in the medical community as an alternative to conventional laboratory testing, especially for home treatments or other forms of outpatient care. Multiple-use chemical sensors with minimal requirements for disposables are among the most practical and cost-effective POC diagnostic instruments, especially in managing chronic conditions. An affordable, simple, and easy-to-use optical sensor based on fast protein liquid chromatography with direct UV absorption detection was developed for the rapid determination of the total protein concentration in effluent peritoneal dialysate and for the assessment of protein losses in end-stage renal disease (ESRD) patients on constant ambulatory peritoneal dialysis (CAPD). The sensor employs non-disposable PD-10 desalting columns for the separation of molecules with different molecular weights and a deep UV LED (maximum at 285 nm) as a light source for optical detection. The analytic procedure is relatively simple, takes 10–15 min, and potentially can be performed by patients themselves or nursing staff without laboratory training. Preliminary clinical trials on a group of 23 patients on CAPD revealed a good concordance between the protein concentrations in dialysate samples measured with the sensor and an automated biochemical analyzer; the mean relative error was about 10%, which is comparable with routine clinical laboratory methods. Full article