Search Results (111)

The connectivity demands of high-performance computing (HPC), artificial intelligence (AI) and data centers are driving the development of a new generation of multimode optical components. This paper discusses the vertical cavity surface emitting laser (VCSEL) bandwidth and noise performance needed to support 106 Gbd line rates with PAM4 modulation for 200 Gbps per lane multimode optical links. A −3 dB bandwidth greater than 35 GHz and a RIN of less than −152 dB/Hz are demonstrated. No uncorrectable errors were observed over 50 m of OM4 fiber, demonstrating good link stability. VCSEL device performance and the associated wear-out life are presented. Leveraging good device reliability and low power consumption of VCSEL-based links, a novel VCSEL near-packaged optics (NPO) concept is proposed for optical interconnects in AI scale-up network applications. Optical interconnects allow for longer reaches, compared to copper interconnects, which facilitate larger AI clusters with network disaggregation. The proposed VCSEL NPO can achieve an energy efficiency of ~1 pJ/bit, which is the highest among optical interconnects. Full article

Vertical cavity surface emitting lasers (VCSELs) have shown great potential in high-speed communication, quantum information processing, and 3D sensing due to their excellent beam quality and low power consumption. However, generating high-purity and controllable circularly polarized light usually requires external optical components such as quarter-wave plates, which undoubtedly increases system complexity and volume, hindering chip-level integration. To address this issue, we propose a monolithic integration scheme that directly integrates a custom-designed double-layer asymmetric metasurface onto the upper distributed Bragg reflector of a chiral VCSEL. This metasurface consists of a rotated GaAs elliptical nanocolumn array and an anisotropic grating above it. By precisely controlling the relative orientation between the two, the in-plane symmetry of the structure is effectively broken, introducing a significant optical chirality response at a wavelength of 1550 nm. Numerical simulations show that this structure can achieve a near 100% high reflectivity for the left circularly polarized light (LCP), while suppressing the reflectivity of the right circularly polarized light (RCP) to approximately 33%, thereby obtaining an efficient in-cavity circular polarization selection function. Based on this, the proposed VCSEL can directly emit high-purity RCP without any external polarization control components. This compact circularly polarized laser source provides a key solution for achieving the next generation of highly integrated photonic chips and will have a profound impact on frontier fields such as spin optics, secure communication, and chip-level quantum light sources. Full article

A double-cavity vertical-cavity surface-emitting laser (VCSEL) can effectively suppress high-order transverse modes and achieve a high side-mode suppression ratio (SMSR). However, the double cavity also results in increased fundamental mode loss, reducing output power. In this study, both p-type and n-type oxide layers were simultaneously incorporated into a double-cavity VCSEL and the structure was numerically simulated using Pics3D (2024) software. The simulation results indicate that this approach can significantly enhance the output power, strengthen the single-transverse-mode characteristic, and thus improve the side-mode suppression ratio (SMSR). Generally, as the number of oxide layers increases, their ability to confine the optical field also enhances, trapping more high-order transverse modes within the oxide aperture, leading to a decrease in SMSR. However, in this study, the introduction of an n-type layer resulted in an abnormal increase in the SMSR, because the n-type oxide layer is situated between the active region and the second cavity. When the optical field oscillates between these two regions, some high-order transverse modes are blocked by the n-type oxide holes and cannot participate in mode competition, thereby increasing the SMSR. Full article

We propose a novel scheme for generating high-frequency millimeter-wave signals by exploiting period-one (P1) dynamics in a mutual injection configuration of two spin-polarized vertical-cavity surface-emitting lasers (spin-VCSELs). The frequency of the generated millimeter-wave signal is jointly determined by the birefringence rate of the spin-VCSEL and the frequency detuning between the two lasers. By leveraging the complex dynamics of free-running spin-VCSELs, we explore the coupling of three distinct dynamic states: continuous-wave (CW) injected into CW, CW injected into P1 oscillation, and P1 oscillation injected into P1 oscillation. Our results reveal that these interactions not only enhance the tunability and frequency of the millimeter-wave output but also significantly reduce the linewidth, offering substantial advantages for reconfigurable photonic systems. This study demonstrates the remarkable potential of mutually injected spin-VCSELs for generating high-performance, tunable photonic millimeter waves and highlights their promising applications in advanced communication and radar systems. Full article

Vertical-cavity surface-emitting lasers (VCSELs) have generated extensive enthusiasm in scientific research on and applications of lasers. However, thermal resistance has seriously limited the performance of such devices for a long time, especially in high-power single-chip large-area VCSEL array modules. In this study, in order to determine the packaging thermal resistance bottleneck of the high-power VCSEL array laser module and achieve better performance, the thermal characteristics of an 808 nm VCSEL module were analyzed quickly with electrical transient measurements without any damage, which consisted of a 6 mm × 6 mm, 85 W, AlGaAs/GaAs VCSEL array chip encapsulated on a submount and a water-cooled heat sink. The quantitative components of the device’s thermal resistance were clearly segmented and rapidly obtained within merely 25 s using the structure function algorithm. The packaging thermal resistances together accounted for an astonishing 70% of the total thermal resistance when the loading current was 8 A. Among them, R_submount and R_solder2 were the main focus areas, which accounted for 54% of the total thermal resistance. We also applied the spectroscopy method to calculate the total thermal resistance of the module on a large scale from another perspective for the comparative verification of the electrical transient method. The values obtained by the two methods were relatively close. More importantly, this research will have a positive impact and an indicative effect on reducing the main thermal resistances of the VCSEL array module. Full article

With the rapid deployment of artificial intelligence (AI) data centers, demand for optical modules surges—alongside faster upgrades and stricter low-power requirements. However, traditional optical driver integrated circuits (ICs) rely on device-specific customization, which lengthens driver design cycles, delays module deployment, and raises costs, becoming a bottleneck for optical module evolution. To address these issues, this work proposes a unified optical transmitter electronic integrated circuit (EIC) design approach featuring synergistic driver-laser/modulator co-design and a versatile output driver (VOD). The VOD can be configured into three output impedance states (open-drain, differential 50-$\Omega$, or differential 100-$\Omega$), enabling it to drive various optical devices like distributed feedback lasers (DFBs), vertical-cavity surface-emitting lasers (VCSELs), electro-absorption modulated lasers (EMLs), and Mach-Zehnder modulators (MZMs) with a single design, minimizing device-specific customization. Meanwhile, its power consumption is also adjustable to maximize the power efficiency. The proposed design approach demonstrates the potential to address the critical interoperability, cost, and power challenges faced by AI data centers, providing a scalable template for next-generation coherent and 4-level pulse amplitude modulation systems and facilitating rapid deployment. Full article

Substantial improvements in the performance of optical interconnects based on multi-mode fibers are required to support emerging single-channel data transmission rates of 200 Gb/s and 400 Gb/s. Future optical components must combine very high modulation bandwidths—supporting signaling at 100 Gbaud and 200 Gbaud—with reduced spectral width to mitigate chromatic-dispersion-induced pulse broadening and increased brightness to further restrict flux-confining area in multi-mode fibers and thereby increase the effective modal bandwidth (EMB). A particularly promising route to improved performance within standard oxide-confined VCSEL technology is the introduction of multiple isolated or optically coupled oxide-confined apertures, which we refer to collectively as multi-aperture (MA) VCSEL arrays. We show that properly designed MA VCSELs exhibit narrow emission spectra, narrow far-field profiles and extended intrinsic modulation bandwidths, enabling longer-reach data transmission over both multi-mode (MMF) and single-mode fibers (SMF). One approach uses optically isolated apertures with lateral dimensions of approximately 2–3 µm arranged with a pitch of 10–12 µm or less. Such devices demonstrate relaxation oscillation frequencies of around 30 GHz in continuous-wave operation and intrinsic modulation bandwidths approaching 50 GHz. Compared with a conventional single-aperture VCSELs of equivalent oxide-confined area, MA designs can reduce the spectral width (root mean square values < 0.15 nm), lower series resistance (≈50 Ω) and limit junction overheating through more efficient multi-spot heat dissipation at the same total current. As each aperture lases in a single transverse mode, these devices exhibit narrow far-field patterns. In combination with well-defined spacing between emitting spots, they permit tailored restricted launch conditions in MMFs, enhancing effective modal bandwidth. In another MA approach, the apertures are optically coupled such that self-injection locking (SIL) leads to lasing in a single supermode. One may regard one of the supermodes as acting as a master mode controlling the other one. Streak-camera studies reveal post-pulse oscillations in the SIL regime at frequencies up to 100 GHz. MA VCSELs enable a favorable combination of wavelength chirp and chromatic dispersion, extending transmission distances over MMFs beyond those expected for zero-chirp sources and supporting transfer bandwidths up to 60 GHz over kilometer-length SMF links. Full article

This paper presents a temperature-robust current-mode vertical-cavity surface-emitting laser (VCSEL) driver (or CMVD) fabricated in a standard 180 nm CMOS process. While prior art relies on conventional current-mirror circuits for bias generation, the proposed CMVD integrates a bandgap-based biasing architecture to achieve high thermal stability and process insensitivity. The bandgap core yields a temperature-compensated reference voltage and is then converted into both stable bias and modulation currents through a cascode current-mirror and switching logic. Post-layout simulations of the proposed CMVD show that the reference voltage variation remains within ±2%, and the bias current deviation is under 10% across full PVT conditions. Furthermore, the output current variation is limited to 7.4%, even under the worst-case corners (SS, 125 °C), demonstrating the reliability of the proposed architecture. The implemented chip occupies a compact core area of 0.0623 mm² and consumes an average power of 18 mW from a single 3.3 V supply, suggesting that the bandgap-stabilized CMVD is a promising candidate for compact, power-sensitive optical systems requiring reliable and temperature-stable performance. Full article

This paper proposes an automatic power and modulation control (APMC) circuit that can directly detect the degradation of vertical cavity surface emitting laser (VCSEL) diodes by utilizing a novel voltage sensing mechanism, thereby eliminating the need for costly external monitoring photodiodes. Notably, the proposed APMC architecture facilely observes the performance degradation by sampling the voltage values at the upper node of the VCSEL diode during both modulation on and off states. The APC loop can perceive a 25 mV voltage drop that corresponds to a 0.5 mA increase in the threshold current, providing a 4-bit digital switch signal. Thereafter, it is delivered to the VCSEL diode driver to initiate compensation of the bias current. In the AMC loop, a 50 mV voltage drop equivalent to a 1 mA reduction in the modulation current is similarly detected to produce another 4-bit digital code. The proposed APMC IC is designed by using a 180 nm CMOS process and consumes a total power of 18.2 mW from a single 3.3 V supply. Full article

By measuring the transfer function of the single-mode multi-aperture vertical-cavity surface-emitting laser (SM MA VCSEL) transmitting over a long single-mode fiber at 850 nm, we confirm that the chirp of the SM MA VCSEL under study is dominated by transient chirp with an alpha value of −3.81 enabling a 19 GHz bandwidth over 10 km of single-mode fiber. The detailed measurement of the VCSEL with different bias currents also allows us to recover other key characteristics of the VCSEL, thereby enabling us to practically construct the optical eye diagrams that closely match the experimentally measured ones. The link-level transfer function can be obtained using an analytical equation including effects of modal dispersion and laser chirp–chromatic dispersion (CD) interaction for an MMF of a given length and bandwidth grade. The narrow linewidth and chirp characteristics of the SM MA VCSEL enable transmission performance that surpasses that of conventional MM VCSELs, achieving comparable transmission distances at moderate modal bandwidths for OM3 and OM4 fibers and significantly longer reaches when the modal bandwidth is higher. The transmission performance was also confirmed with the modeled eye diagrams using extracted VCSEL parameters. The chirp properties also provide sufficient bandwidth for SM MA VCSEL transmission over kilometer-scale lengths of single-mode fibers at a high data rate of 100G or above with sufficient optical power coupled into the fibers. Advanced transmission distances are possible over multimode and single-mode fibers versus chirp-free devices. Full article

Optically pumped semiconductor disk lasers—known as vertical-external-cavity surface-emitting lasers (VECSELs)—are promising devices for ultrashort pulse formation. For it, a “SESAM-free” approach labeled “self-mode-locking” received considerable attention in the past decade, relying solely on a chip-related nonlinear optical property which can establish adequate pulsing conditions—thereby suggesting a reduced reliance on a semiconductor saturable-absorber mirror (the SESAM) in the cavity. Self-mode-locked (SML) VECSELs with sub-ps pulse durations were reported repeatedly. This motivated investigations on a Kerr-lensing type effect acting as an artificial saturable absorber. So-called Z-scan and ultrafast beam-deflection experiments were conducted to emphasize the role of nonlinear lensing in the chip for pulse formation. Recently, in addition to allowing stable ultrashort pulsed operation, self-starting mode-locked operation gave rise to another emission regime related to frequency comb formation. While amplitude-modulated combs relate to signal peaks in time, providing a so-called pulse train, a frequency-modulated comb is understood to cause quasi continuous-wave output with its sweep of instantaneous frequency over the range of phase-locked modes. With gain-bandwidth-enhanced chips, as well as with an improved understanding of the impacts of dispersion and nonlinear lensing properties and cavity configurations on the device output, an enhanced employment of SML VECSELs is to be expected. Full article

Vertical-cavity surface-emitting laser (VCSEL)-based transmission over multimode fiber (MMF) has achieved data rates of 100G per lane and is progressing towards 200G/lane, which demands more modal bandwidth from MMF to ensure adequate transmission reach. We address the needs of higher modal bandwidth from the point of view of engineering VCSEL launch conditions. We explore the options for using subsets of 10 standard-based launch conditions by analyzing the measured encircled fluxes from commercial VCSEL transceivers over two options. By utilizing experimentally measured MMF data, we demonstrated a significant improvement in modal bandwidth with these options. The launch conditions also impact the wavelength dependence of modal bandwidth for VCSELs operating at wavelengths longer than 850 nm. We conducted detailed Monte Carlo simulation of the wavelength dependence of modal bandwidth over MMFs. For one launch condition option using a smaller area, the modal bandwidths are improved over the effective modal bandwidth (EMB), and favor very high data rate transmission by allowing the use of a smaller area photodetector. Full article

An electrically injected vertical-cavity surface-emitting laser (VCSEL) with quantum-well-embedded InGaN quantum dots (QDs) as the active region was designed. The InGaN QD size and cavity length were optimized using PICS3D simulation software to achieve a high-performance InGaN QD-embedded VCSEL. A comparative analysis between the InGaN QD VCSEL and the traditional InGaN quantum well VCSEL was conducted, and the results demonstrated that the InGaN QD VCSEL achieved higher stimulated recombination radiation and internal quantum efficiency. The threshold current was reduced to 4 mA, corresponding to a threshold current density of 5.1 kA/cm², and the output power reached 4.4 mW at an injection current of 20 mA. A stable single-longitudinal-mode output was also achieved with an output wavelength of 436 nm. The proposed novel quantum-well-embedded QD active-region VCSEL was validated through theoretical simulations, confirming its feasibility. This study provides theoretical guidance and key epitaxial structural parameters for preparing high-performance VCSEL epitaxial materials. Full article

This paper studied a multi-channel self-mixing interferometric vibration measurement system based on a vertical-cavity surface-emitting laser array. A 1 × 8 laser array was utilized to irradiate multiple positions of a vibrating target to establish independent measurement channels. The reflected light beams, carrying the vibration information of each position, were redirected back into the laser and coherently mixed with the original optical field, generating the self-mixing interference. The interferometric signals were measured by monitoring the junction voltage variations across the terminals of the VCSEL array. A denoising filtering method based on the variational mode decomposition with Hausdorff distance was proposed to improve the signal-to-noise ratio. Furthermore, the vibration waveforms of different positions were reconstructed using the Hilbert transform-based orthogonal phase demodulation technology. Both simulations on synthetic signals and experiments with real datasets were conducted to validate the feasibility and stability of the proposed method. Due to the array detection configuration, the system boasted a simple and compact structure, low power consumption, and easy extensibility, laying the groundwork for high accuracy and multi-dimensional vibration detection in industrial applications. Full article

Single-mode (SM) vertical-cavity surface-emitting lasers (VCSELs) have often been demonstrated with an unusually long transmission reach at very high data rates while today’s multimode VCSEL transmission has been limited by the fiber modal bandwidth and bandwidth contributed by the VCSEL–chromatic dispersion interaction under typical encircled flux launch condition. By using the same launch condition for VCSEL and modal bandwidth measurements, we studied the link bandwidth capability of SM multi-aperture (MA) VCSEL transmission. Using a multimode fiber with modal bandwidth under actual launch conditions moderately lower than OM4 threshold, we observed that the link bandwidth, with contributions from both modal bandwidth and laser–chromatic dispersion interaction, is higher than the corresponding modal bandwidths, which is very counter-intuitive. A detailed analysis reveals that the enhanced link bandwidth is contributed by both narrow laser linewidth and favorable laser–chromatic dispersion interaction. Through the study, we demonstrate that OM4 can meet link bandwidth requirements for 200/100 G/lane transmission over 100/200 m using SM MA VCSELs. Full article