Search Results (16)

Mammography is an essential tool in breast screening, often revealing lesions that appear as microcalcifications with or without an associated mass. Decisions about biopsy requirements are guided by the BI-RADS system, aiming to confirm the histopathology of suspicious lesions while avoiding unnecessary procedures. A vacuum-assisted breast biopsy (VABB) is a minimally invasive procedure for diagnosing breast abnormalities. Precise lesion targeting is ensured under stereotactic guidance, reducing the need for repeated procedures. Compared to traditional core needle biopsy (CNB) and fine-needle aspiration cytology (FNAC), it differs in using vacuum assistance to gather more tissue volume, increasing diagnostic accuracy and reducing the likelihood of histological underestimation. This is particularly crucial in cases where microcalcifications are the primary finding, as they are often the earliest signs of ductal carcinoma in situ (DCIS). Managing such findings requires precise diagnostic tools to differentiate benign from malignant lesions without subjecting patients to unnecessary surgical interventions. Building on several years of experience in our department, we have assembled a selection of ten interesting cases encountered in our clinical practice. Each case is documented with paired mammographic images and their corresponding image of histopathological findings, offering a comprehensive view of the diagnostic journey. These cases were selected for their educational value, highlighting the integration of imaging modalities, histopathological evaluation, and clinical decision-making. All cases underwent an extensive diagnostic workup at our facility. This compilation aims to provide valuable insights for both clinicians and researchers, offering a deeper understanding of advanced diagnostic techniques and their role in improving patient outcomes. Full article

The disordered assembly and low conductivity of carbon nanotubes are the main problems that limit the application of electromagnetic interference (EMI) shielding. In this work, an ordered lamellar assembly structure of multiwalled carbon nanotube/Ti₃C₂T_x (MWCNT/Ti₃C₂T_x) hybrid films was achieved by vacuum-assisted filtration through the hybridization of Ti₃C₂T_x nanosheets and carbon nanotubes, where carbon nanotubes were tightly sticking on the surface of Ti₃C₂T_x nanosheets via physical adsorption and hydrogen bonding. Compared with the pure carbon nanotubes films, the hybrid MWCNT/Ti₃C₂T_x films achieved a significant improvement in conductivity of 452.5 S/cm and EMI shielding effectiveness (SE) of 44.3 dB under 50 wt% Ti₃C₂T_x with a low thickness (8.6 μm) and orderly lamellar stacking structure, which finally resulted in high specific SE (SSE/t, SE divided by the density and thickness) of 55,603.1 dB∙cm²∙g⁻¹. Full article

The application of antibiotics has advanced modern medicine significantly. However, the abuse and discharge of antibiotics have led to substantial antibiotic residues in water, posing great harm to natural organisms and humans. To address the problem of antibiotic degradation, this study developed a novel catalytic membrane by depositing Co catalysts onto MXene nanosheets and fabricating the polyethersulfone composite (Co@MXene/PES) using vacuum-assisted self-assembly. The dual role of MXene as both a carrier for Co atoms and an enhancer of interlayer spacing led to improved flux and catalytic degradation capabilities of the membrane. Experimental results confirmed that the Co@MXene/PES membrane effectively degraded antibiotics through peroxymonosulfate activation, achieving up to 95.51% degradation at a cobalt concentration of 0.01 mg/mL. The membrane demonstrated excellent antibacterial properties, minimal flux loss after repeated use, and robust anti-fouling performance, making it a promising solution for efficient antibiotic removal and stable water treatment. Full article

Lithium–sulfur batteries (LSBs) hold promise for use in next-generation high-energy-density energy storage systems. However, the commercial application of LSBs is hindered by the shuttle effect of polysulfides. In this study, we synthesized a covalent organic framework material (PY−DHBD−COF) and employed it to modify the separators of LSBs in order to buffer the shuttle effect of polysulfides. A modified separator, involving PY−DHBD−COF coating of the commercial Celgard 2500 PP separator, is prepared via a vacuum-assisted self-assembly method. The PY−DHBD−COF features hydroxyl and imine bonds, which can adsorb lithium polysulfides (LiPSs) and buffer the shuttle effect. The PY−DHBD−COF coating exhibits a thin thickness and oriented nanochannels, facilitating electrolyte wetting and Li⁺ transport. As a result, the LSBs with PY−DHBD−COF-modified separators exhibit a high specific capacity of 373 mAh g⁻¹ at 4 C with only 0.005% capacity decay per cycle after 450 cycles at 2 C, demonstrating an excellent cycling performance. Full article

Multifunctional biofilms with early fire-warning capabilities are highly necessary for various indoor and outdoor applications, but a rational design of intelligent fire alarm films with strong weather resistance remains a major challenge. Herein, a multiscale hierarchical biofilm based on lignocellulose nanofibrils (LCNFs), carbon nanotubes (CNTs) and TiO₂ was developed through a vacuum-assisted alternate self-assembly and dipping method. Then, an early fire-warning system that changes from an insulating state to a conductive one was designed, relying on the rapid carbonization of LCNFs together with the unique electronic excitation characteristics of TiO₂. Typically, the L-CNT-TiO₂ film exhibited an ultrasensitive fire-response signal of ~0.30 s and a long-term warning time of ~1238 s when a fire disaster was about to occur, demonstrating a reliable fire-alarm performance and promising flame-resistance ability. More importantly, the L-CNT-TiO₂ biofilm also possessed a water contact angle (WCA) of 166 ± 1° and an ultraviolet protection factor (UPF) as high as 2000, resulting in excellent superhydrophobicity, antifouling, self-cleaning as well as incredible anti-ultraviolet (UV) capabilities. This work offers an innovative strategy for developing advanced intelligent films for fire safety and prevention applications, which holds great promise for the field of building materials. Full article

The use of ionic liquid-based membranes as polymer electrolyte membranes for fuel cell applications increases significantly due to the major features of ionic liquids (i.e., high thermal stability and ion conductivity, non-volatility, and non-flammability). In general, there are three major methods to introduce ionic liquids into the polymer membrane, such as incorporating ionic liquid into a polymer solution, impregnating the polymer with ionic liquid, and cross-linking. The incorporation of ionic liquids into a polymer solution is the most common method, owing to easy operation of process and quick membrane formation. However, the prepared composite membranes suffer from a reduction in mechanical stability and ionic liquid leakage. While mechanical stability may be enhanced by the membrane’s impregnation with ionic liquid, ionic liquid leaching is still the main drawback of this method. The presence of covalent bonds between ionic liquids and polymer chains during the cross-linking reaction can decrease the ionic liquid release. Cross-linked membranes reveal more stable proton conductivity, although a decrease in ionic mobility can be noticed. In the present work, the main approaches for ionic liquid introduction into the polymer film are presented in detail, and the recently obtained results (2019–2023) are discussed in correlation with the composite membrane structure. In addition, some promising new methods (i.e., layer-by-layer self-assembly, vacuum-assisted flocculation, spin coating, and freeze drying) are described. Full article

Growing environmental concerns are stimulating researchers to develop more and more efficient materials for environmental remediation. Among them, polymer-based hierarchical structures, attained by properly combining certain starting components and processing techniques, represent an emerging trend in materials science and technology. In this work, graphene oxide (GO) and/or carbon nanotubes (CNTs) were integrated at different loading levels into poly (vinyl fluoride-co-hexafluoropropylene) (PVDF-co-HFP) and then electrospun to construct mats capable of treating water that is contaminated by methylene blue (MB). The materials, fully characterized from a morphological, physicochemical, and mechanical point of view, were proved to serve as membranes for vacuum-assisted dead-end membrane processes, relying on the synergy of two mechanisms, namely, pore sieving and adsorption. In particular, the nanocomposites containing 2 wt % of GO and CNTs gave the best performance, showing high flux (800 L × m⁻² h⁻¹) and excellent rejection (99%) and flux recovery ratios (93.3%), along with antifouling properties (irreversible and reversible fouling below 6% and 25%, respectively), and reusability. These outstanding outcomes were ascribed to the particular microstructure employed, which endowed polymeric membranes with high roughness, wettability, and mechanical robustness, these capabilities being imparted by the peculiar self-assembled network of GO and CNTs. Full article

A flexible thermoelectric device has been considered as a competitive candidate for powering wearable electronics. Here, we fabricated an n-type Ag₂Se/Ag composite film on a flexible nylon substrate using vacuum-assisted filtration and a combination of cold and hot pressing. By optimising the Ag/Se ratio and the sequential addition and reaction time of AA, an excellent power factor of 2277.3 μW∙m⁻¹ K⁻² (corresponding to a ZT of ~0.71) at room temperature was achieved. In addition, the Ag₂Se/Ag composite film exhibits remarkable flexibility, with only 4% loss and 10% loss in electrical conductivity after being bent around a rod of 4 mm radius for 1000 cycles and 2000 cycles, respectively. A seven-leg flexible thermoelectric device assembled with the optimised film demonstrates a voltage of 19 mV and a maximum power output of 3.48 μW (corresponding power density of 35.5 W m⁻²) at a temperature difference of 30 K. This study provides a potential path to design improved flexible TE devices. Full article

MXene (Ti₃C₂T_x) film prepared by vacuum-assisted filtration (V-MXene film) is the most common 2D MXene macroscopic assembly with ultra-high electrical conductivity, tunable interlayer space, diverse surface chemical properties, favorable mechanical properties and so on, showing great commercial value in the fields of energy storage, electromagnetic interference shielding and actuators and so on. This paper focuses on the preparation, properties and applications of V-MXene film, objectively reviews and evaluates the important research progress of V-MXene film in recent years and analyzes the main problems at present. In addition, the development direction and trend of V-MXene film in the future are prospected from the aspects of preparation, property control and application fields, which provide guidance and inspiration for the further development of functional MXene-based films and make contributions to the progress of MXene technology. Full article

Novel materials with a periodic structure have recently been intensively studied for various photonic and photocatalytic applications due to an efficient light harvesting ability. Here, inverse opal titania (IOT) has been investigated for possible enhancement of photocatalytic activity. The IOT films were prepared on a glass support from silica and polystyrene (PS) opals by sandwich-vacuum-assisted infiltration and co-assembly methods, respectively. The reference sample was prepared by the same method (the latter) but with PS particles of different sizes, and thus without photonic feature. The modification of preparation conditions was performed to prepare the films with a high quality and different photonic properties, i.e., photonic bandgap (PBG) and slow photons’ wavelengths. The morphology and optical properties were characterized by scanning electron microscopy (SEM) and UV/vis spectroscopy, respectively. The photocatalytic activity was evaluated (also in dependence on the irradiation angle) for oxidative decomposition of acetaldehyde gas under irradiation with blue LED by measuring the rate of evolved carbon dioxide (CO₂). It has been found that PBG wavelength depends on the size of particles forming opal, the void diameter of IOT, and irradiation angle, as expected from Bragg’s law. The highest activity (more than two-fold enhancement in the comparison to the reference) has been achieved for the IOT sample of 226-nm void diameter and PBG wavelengths at 403 nm, prepared from almost monodisperse PS particles of 252-nm diameter. Interestingly, significant decrease in activity (five times lower than reference) has been obtained for the IOT sample of also high quality but with 195-nm voids, and thus PBG at 375 nm (prohibited light). Accordingly, it has been proposed that the perfect tunning of photonic properties (here the blue-edge slow-photon effect) with bandgap energy of photocatalyst (e.g., absorption of anatase) results in the improved photocatalytic performance. Full article

Innovative materials for substituting metals are required to reduce the mass of moving components. This decreases the CO₂ emissions of overall systems. A thermoset sandwich for high mechanical properties and thermal insulation is presented in this paper. It has an innovative 3D continuous reinforced core, which allows the optimisation of the substance exploitation by wide-ranging possibilities of fibre orientation. This was demonstrated with three sandwich variants. The reference had no core reinforcement and the other two were reinforced with different spacer fabrics. The process chain for the manufacturing consists of Structural Reaction Injection Moulding (SRIM) and Vacuum Assisted Resin Transfer Moulding (VARTM). Significant increases in absolute as well as specific characteristic values were demonstrated by the reinforcement in a compression and bending test. It was also shown that quasi-static characteristic values under fatigue loading are maintained to a greater extent with the core reinforcement. The sandwich material was applied as a floor assembly for a snow groomer. The design was tailor-made for the mechanical, thermal and acoustic requirements. This proved the transferability of the process chain for manufacturing samples to the production of large-volume components with complex geometry. Full article

The pursuit of improved water purification technology has motivated extensive research on novel membrane materials to be carried out. In this paper, one-dimensional carboxylated carbon nanotubes (CNTs) were intercalated into the interlayer space of layered double hydroxide (LDH) to form a composite membrane for water purification. The CNTs/LDH laminates were deposited on the surface of the hydrolyzed polyacrylonitrile (PAN) ultrafiltration membrane through a vacuum-assisted assembly strategy. Based on the characterization of the morphology and structure of the CNTs/LDH composite membrane, it was found that the intercalation of CNT created more mass transfer channels for water molecules. Moreover, the permeance of the CNTs/LDH membrane was improved by more than 50% due to the low friction and rapid flow of water molecules in the CNT tubes. Additionally, the influence of preparation conditions on the separation performance was investigated using Evans blue (EB). Optimized fabrication conditions were given (the concentration of CoAl-LDH was 0.1 g/L and the weight ratio of CNTs was 2 wt.%). Next, the separation performances of the prepared CNTs/LDH composite membrane were evaluated using both single and mixed dye solutions. The results showed that the composite membrane obtained possessed a retention of 98% with a permeance of 2600 kg/(m²·h·MPa) for EB, which was improved by 36% compared with the pristine LDH composite membrane. Moreover, the stability of the CNTs/LDH composite membrane was investigated in 100 h with no obvious permeance drop (less than 13%), which exhibited its great potential in water purification. Full article

As newly emerged 2D layered transition metal carbides or carbonitrides, MXenes have attracted growing attention in energy conversion and storage applications due to their exceptional high electronic conductivity, ample functional groups (e.g., -OH, -F, -O), desirable hydrophilicity, and superior dispersibility in aqueous solutions. The significant advantages of MXenes enable them to be intriguing structural units to engineer advanced MXene-based nanocomposites for electrochemical storage devices with remarkable performances. Herein, this review summarizes the current advances of MXene-based materials for energy storage (e.g., supercapacitors, lithium ion batteries, and zinc ion storage devices), in which the fabrication routes and the special functions of MXenes for electrode materials, conductive matrix, surface modification, heteroatom doping, crumpling, and protective layer to prevent dendrite growth are highlighted. Additionally, given that MXene are versatile for self-assembling into specific configuration with geometric flexibility, great efforts about methodologies (e.g., vacuum filtration, mask-assisted filtration, screen printing, extrusion printing technique, and directly writing) of patterned MXene-based composite film or MXene-based conductive ink for fabricating more types of energy storage device were also discussed. Finally, the existing challenges and prospects of MXene-based materials and growing trend for further energy storage devices are also presented. Full article

Recently, to meet the growing demand for stable and flexible batteries, anodes in the form of thin films have drawn the attention of researchers. It is clear that mass production of such batteries would bring the worldwide distribution of flexible devices and wearable electronics closer. Currently, electrodes are deposited on a flexible substrate and consist of conductive and binding agents that increase the volume/weight of the electrode. Here, we propose free-standing and non-active-material-free thin films based on reduced graphene oxide (rGO), titanium dioxide (TiO₂) and manganese dioxide (MnO₂) as working electrodes in lithium-ion half-cells prepared via the vacuum-assisted filtration method. The electrochemical performance of the assembled half-cells exhibited good cyclic stability and a reversible capacity at lower current densities. The addition of TiO₂ and MnO₂ improved the capacity of the rGO film, while rGO itself provided a stable rate performance. rGO/TiO₂/MnO₂ film showed the highest discharge capacity (483 mAh/g at 50 mA/g). In addition, all assembled cells displayed excellent repeatability and reversibility in cyclic voltammetry measurements and good lithium-ion diffusion through the electrolyte, SEI layer and the active material itself. Full article

Heteroepitaxial growth of Ge films on Si is necessary for the progress of integrated Si photonics technology. In this work, an in-house assembled plasma enhanced chemical vapor deposition reactor was used to grow high quality epitaxial Ge films on Si (100) substrates. Low economic and thermal budget were accomplished by the avoidance of ultra-high vacuum conditions or high temperature substrate pre-deposition bake for the process. Films were deposited with and without plasma assistance using germane (GeH₄) precursor in a single step at process temperatures of 350–385 °C and chamber pressures of 1–10 Torr at various precursor flow rates. Film growth was realized at high ambient chamber pressures (>10⁻⁶ Torr) by utilizing a rigorous ex situ substrate cleaning process, closely controlling substrate loading times, chamber pumping and the dead-time prior to the initiation of film growth. Plasma allowed for higher film deposition rates at lower processing temperatures. An epitaxial growth was confirmed by X-Ray diffraction studies, while crystalline quality of the films was verified by X-ray rocking curve, Raman spectroscopy, transmission electron microscopy and infra-red spectroscopy. Full article