Search Results (553)

Autonomous vehicles (AVs) have emerged as a promising sustainable urban mobility solution, expected to lead to enhanced road safety, smoother traffic flows, less traffic congestion, improved accessibility, better energy utilization and environmental performance, as well as more efficient passenger and freight transportation, in terms of time and cost, due to better fleet management and platooning. However, challenges also arise, mostly related to data privacy, security and cyber-security, high acquisition and infrastructure costs, accident liability, even possible increased traffic congestion and air pollution due to induced travel demand. This paper presents the results of a survey conducted among 654 residents who experienced an autonomous bus (AB) service in the city of Trikala, Greece, in order to assess their willingness to use (WTU) and willingness to pay (WTP) for ABs, through testing a range of factors based on a literature review. Results useful to policy-makers were extracted, such as that the intention to use ABs was mostly shaped by psychological factors (e.g., users’ perceptions of usefulness and safety, and trust in the service provider), while WTU seemed to be positively affected by previous experience in using ABs. In contrast, sociodemographic factors were found to have very little effect on the intention to use ABs, while apart from personal utility, users’ perceptions of how autonomous driving will improve the overall life standards in the study area also mattered. Full article

This paper proposes a novel hierarchical control architecture that combines Model Predictive Control (MPC) with Explicit Model-Following Control (EMFC) to enable accurate and efficient trajectory tracking for quadrotor electric Vertical Takeoff and Landing (eVTOL) aircraft operating in urban environments. The approach addresses the challenges of strong nonlinear dynamics, multi-axis coupling, and stringent safety constraints by separating the planning task from the fast-response control task. The MPC layer generates constrained velocity and yaw rate commands based on a simplified inertial prediction model, effectively reducing computational complexity while accounting for physical and operational limits. The EMFC layer then compensates for dynamic couplings and ensures the rapid execution of commands. A high-fidelity simulation model, incorporating rotor flapping dynamics, differential collective pitch control, and enhanced aerodynamic interference effects, is developed to validate the controller. Four representative ADS-33E-PRF tasks—Hover, Hovering Turn, Pirouette, and Vertical Maneuver—are simulated. Results demonstrate that the proposed controller achieves accurate trajectory tracking, stable flight performance, and full compliance with ADS-33E-PRF criteria, highlighting its potential for autonomous urban air mobility applications. Full article

Rapid industrialization and urbanization have progressed in Korea, yet public attention to hazardous pollutants emitted from industrial complexes remains limited. With the increasing coexistence of industrial and residential areas, there is a growing need for real-time monitoring and management plans that account for the rapid dispersion of hazardous air pollutants (HAPs). In this study, we conducted spatiotemporal data collection and analysis for the first time in Korea using real-time measurements obtained through mobile extractive differential optical absorption spectroscopy (Me-DOAS) mounted on a solar occultation flux (SOF) vehicle. The measurements were conducted in the Saha Sinpyeong–Janglim Industrial Complex in Busan, which comprises the Sasang Industrial Complex and the Sinpyeong–Janglim Industrial Complex. BTEX compounds were selected as target volatile organic compounds (VOCs), and real-time measurements of both BTEX and fine particulate matter (PM) were conducted simultaneously. Correlation analysis revealed a strong relationship between PM₁₀ and PM_2.5 (r = 0.848–0.894), indicating shared sources. In Sasang, BTEX levels were associated with traffic and localized facilities, while in Saha Sinpyeong–Janglim, the concentrations were more influenced by industrial zoning and wind patterns. Notably, inter-compound correlations such as benzene–m-xylene and p-xylene–toluene suggested possible co-emission sources. This study proposes a GIS-based, three-dimensional air quality management approach that integrates variables such as traffic volume, wind direction, and speed through real-time measurements. The findings are expected to inform effective pollution control strategies and future environmental management plans for industrial complexes. Full article

With the rise of the low-altitude urban traffic system, urban air mobility (UAM) has developed rapidly. As a critical component of the UAM system, the strategic layout of vertiports helps divert ground traffic pressure. To satisfy various demand patterns, different vertiport levels are needed, so we focus on the hierarchical vertiport location problem. Considering the capacity limitation, a median location model is established to minimize vertiport construction cost, passenger commuting cost, and penalty cost. For the nonlinear term in the objective function, the Big-M method is employed. Based on the reformulated model, we improve the branch-and-bound algorithm (LVBB) to solve it, where the Lagrange relaxation method is used to decompose the large-scale problem into parallel subproblems and compute the lower bound, and the variable neighborhood search algorithm is used to obtain the upper bound. Numerical experiments are performed in the 11 administrative districts of Nanjing, China. The results demonstrate that the proposed location scheme effectively balances vertiport construction cost and passenger commuting cost while satisfying capacity limitations. It also significantly reduces commuting time to improve passenger satisfaction. This scheme can offer strategic guidance for infrastructure planning in UAM. Full article

The tandem tilt-wing UAV features an advanced aerodynamic layout design and is regarded as a solution for small-scale urban air mobility. However, the tandem wing configuration exhibits complex aerodynamic interactions between the front and rear wings during cruise flight and the wing tilt transition process. The objective of this paper is to investigate the aerodynamic coupling characteristics between the front and rear wings of the tandem tilt-wing UAV under level flight and tilt transition conditions while also assessing the influence of the propellers on the aircraft’s aerodynamic performance. Through CFD numerical analysis, the aerodynamic characteristics of various aircraft components are examined at different angles of attack and wing tilt angles, and the underlying reasons for the observed differences and variations are explored. The results indicate that, during level flight, the aerodynamic interference between the wings is primarily dominated by the detrimental influence of the front wing on the rear wing. During the tilt transition process, mutual interactions between the front and rear wings occur as wing tilt angle changes, leading to more drastic variations in lift coefficients and increased control difficulty. However, the propeller’s effect contributes to smoother changes in lift and drag, thereby enhancing aircraft stability. Full article

The air quality within urban public transport is a critical determinant of passenger health. In the crowded and poorly ventilated cabins of Almaty’s metro, buses, and trolleybuses, concentrations of CO₂ and PM_2.5 often accumulate, elevating the risk of respiratory and cardiovascular diseases. This study investigates the air quality along three of the city’s busiest transport corridors, analyzing how the concentrations of CO₂, PM_2.5, and PM₁₀, as well as the temperature and relative humidity, fluctuate with the passenger density and time of day. Continuous measurements were collected using the Tynys mobile IoT device, which was bench-calibrated against a commercial reference sensor. Several machine learning models (logistic regression, decision tree, XGBoost, and random forest) were trained on synchronized environmental and occupancy data, with the XGBoost model achieving the highest predictive accuracy at 91.25%. Our analysis confirms that passenger occupancy is the primary driver of in-cabin pollution and that these machine learning models effectively capture the nonlinear relationships among environmental variables. Since the surveyed routes serve Almaty’s most densely populated districts, improving the ventilation on these lines is of immediate importance to public health. Furthermore, the high-temporal-resolution data revealed short-term pollution spikes that correspond with peak ridership, advancing the current understanding of exposure risks in transit. These findings highlight the urgent need to combine real-time monitoring with ventilation upgrades. They also demonstrate the practical value of using low-cost IoT technologies and data-driven analytics to safeguard public health in urban mobility systems. Full article

Accurate prediction of drone motion within structured urban air corridors is essential for ensuring safe and efficient operations in Urban Air Mobility (UAM) systems. Although real-world Remote Identification (Remote ID) regulations require drones to broadcast critical flight information such as velocity, access to large-scale, high-quality broadcast data remains limited. To address this, this study leverages a Digital Twin (DT) framework to augment Remote ID spatio-temporal broadcasts, emulating the sensing environment of dense urban airspace. Using Remote ID data, we propose BiDGCNLLM, a hybrid prediction framework that integrates a Bidirectional Graph Convolutional Network (BiGCN) with Dynamic Edge Weighting and a reprogrammed Large Language Model (LLM, Qwen2.5–0.5B) to capture spatial dependencies and temporal patterns in drone speed trajectories. The model forecasts near-future speed variations in surrounding drones, supporting proactive conflict avoidance in constrained air corridors. Results from the AirSUMO co-simulation platform and a DT replica of the Cranfield University campus show that BiDGCNLLM outperforms state-of-the-art time series models in short-term velocity prediction. Compared to Transformer-LSTM, BiDGCNLLM marginally improves the $R^2$ by 11.59%. This study introduces the integration of LLMs into dynamic graph-based drone prediction. It shows the potential of Remote ID broadcasts to enable scalable, real-time airspace safety solutions in UAM. Full article

Urban Air Mobility (UAM) is envisioned to revolutionize urban transportation by improving traffic efficiency and mitigating surface-level congestion. One of the fundamental challenges in implementing UAM systems lies in the optimal siting of vertiports, which requires a delicate balance among infrastructure construction costs, passenger access costs to their assigned vertiports, and the operational connectivity of the resulting vertiport network. This study develops an integrated mathematical model for vertiport location decision, aiming to minimize total system cost while ensuring UAM network connectivity among the selected vertiport locations. To efficiently solve the problem and improve solution quality, a hybrid genetic algorithm is developed by incorporating a Minimum Spanning Tree (MST)-based connectivity enforcement mechanism, a fundamental concept in graph theory that connects all nodes in a given network with minimal total link cost, enhanced by a greedy initialization strategy. The effectiveness of the proposed algorithm is demonstrated through numerical experiments conducted on both synthetic datasets and the real-world transportation network of New York City. The results show that the proposed hybrid methodology not only yields high-quality solutions but also significantly reduces computational time, enabling faster convergence. Overall, this study provides practical insights for UAM infrastructure planning by emphasizing demand-oriented vertiport siting and inter-vertiport connectivity, thereby contributing to both theoretical development and large-scale implementation in complex urban environments. Full article

Air pollution caused by CO₂ emissions has become a global issue of vital importance, posing irreversible risks to health and life when concentration of CO₂ becomes too high. This study aims to estimate the CO₂ emissions and carbon footprint of the public transport bus fleet in Bucharest, with a comparative analysis of greenhouse gas (GHG) emissions generated by diesel and electric buses of the Bucharest Public Transport Company (STB S.A.) in the period 2021–2024, after the modernization of the fleet through the introduction of 130 hybrid buses and 58 electric buses. In 2024, the introduction of electric buses and the reduction in diesel bus mileage reduced GHG emissions by almost 13% compared to 2023, saving over 11 kilotons of CO_2e. There was also a 2.68% reduction in the specific carbon footprint compared to the previous year, which is clear evidence of the potential of electric vehicles in achieving decarbonization targets. We have also developed two strategies, one for 2025 and one for the period 2025–2030, replacing the aging fleet with electric vehicles. This demonstrates the relevance of electric transport integrated into the sustainable development strategy for urban mobility systems and alignment with European standards, including improving air quality and living standards. Full article

The integration of reconfigurable intelligent surfaces (RISs) with non-terrestrial networks (NTNs), particularly those enabled by unmanned aerial vehicles (UAVs) or drone-based platforms, has emerged as a transformative approach to enhance 6G connectivity in high-mobility scenarios. UAV-assisted NTNs offer flexible deployment, dynamic altitude control, and rapid network reconfiguration, making them ideal candidates for RIS-based signal optimization. However, the high mobility of UAVs and their three-dimensional trajectory dynamics introduce unique challenges in maintaining robust, low-latency links and seamless handovers. This paper presents a comprehensive performance analysis of RIS-assisted UAV-based NTNs, focusing on optimizing RIS phase shifts to maximize the signal-to-interference-plus-noise ratio (SINR), throughput, energy efficiency, and reliability under UAV mobility constraints. A joint optimization framework is proposed that accounts for UAV path loss, aerial shadowing, interference, and user mobility patterns, tailored specifically for aerial communication networks. Extensive simulations are conducted across various UAV operation scenarios, including urban air corridors, rural surveillance routes, drone swarms, emergency response, and aerial delivery systems. The results reveal that RIS deployment significantly enhances the SINR and throughput while navigating energy and latency trade-offs in real time. These findings offer vital insights for deploying RIS-enhanced aerial networks in 6G, supporting mission-critical drone applications and next-generation autonomous systems. Full article

Air pollution poses a growing threat to public health and the environment, highlighting the need for continuous and precise urban air quality monitoring. The aim of this study was to implement and evaluate an autonomous air quality monitoring platform developed by the University of Ruse, “Angel Kanchev”, under Bulgaria’s National Recovery and Resilience Plan (project BG-RRP-2.013-0001), co-financed by the European Union through the NextGenerationEU initiative. The system, based on Libelium’s mobile sensor technology, was installed at a height of two meters on the university campus near Rodina Boulevard and operated continuously from 1 March 2024 to 30 March 2025. Every 15 min, it recorded concentrations of CO, CO₂, NO₂, SO₂, PM₁, PM_2.5, and PM₁₀, along with meteorological parameters (temperature, humidity, and pressure), transmitting the data via GSM to a cloud-based database. Analyses included a distributional assessment, Spearman rank correlations, Kruskal–Wallis tests with Dunn–Sidak post hoc comparisons, and k-means clustering to identify temporal and meteorological patterns in pollutant levels. The results indicate the high operational stability of the system and reveal characteristic pollution profiles associated with time of day, weather conditions, and seasonal variation. The findings confirm the value of combining calibrated IoT systems with advanced statistical methods to support data-driven air quality management and the development of predictive environmental models. Full article

The goal of this paper is to optimize mission schedules for vertical airports (vertiports in short) to satisfy the different needs of stakeholders. We model the problem as a resource-constrained project scheduling problem (RCPSP) to obtain the best resource allocation and schedule. As a new approach to solving the RCPSP, we propose answer set programming (ASP). This is in contrast to the existing research using MILP as a solution to the RCPSP. Our approach can take complex scheduling restrictions and stakeholder-specific requirements. In addition, we formalize and include stakeholder needs using a knowledge representation and reasoning framework. Our experiments show that the proposed method can generate practical schedules that reflect what stakeholders actually need. In particular, we show that our approach can compute optimal schedules more efficiently and flexibly than previous approaches. We believe that this approach is suitable for the dynamic and complex environments of vertiports. Full article

Exposure to fine particulate matter (PM2.5) has become an increasing public health concern, particularly in urban areas facing severe air pollution. In response, individuals are increasingly turning to real-time tracking systems and self-monitoring tools. This study aimed to examine the association between PM2.5 risk perception, self-monitoring behaviors, and anxiety levels in the general population of Thailand. A cross-sectional survey was conducted during the dry season using an online questionnaire, which included the 7-item Generalized Anxiety Disorder (GAD-7) scale. A total of 921 participants residing in Bangkok and Chiang Mai were included. Binary logistic regression analysis, adjusted for sex, age, marital status, monthly income, and years of residence, revealed a significant association between anxiety and perceived health risks of PM2.5 exposure (OR = 1.09; 95% CI: 1.06–1.13). Daily self-monitoring of air quality over the past two weeks was also significantly linked to higher anxiety levels compared to non-monitoring individuals: OR = 1.92 (95% CI: 1.11–3.33) for websites, OR = 1.65 (95% CI: 1.01–2.72) for mobile apps, OR = 1.72 (95% CI: 1.12–2.64) for air purifiers, and OR = 3.34 (95% CI: 1.77–6.31) for air quality detectors. Monitoring 4–6 days per week using apps and air detectors was similarly associated with increased anxiety (OR = 1.64 and 2.30, respectively). Heightened perception of PM2.5 health risks and frequent self-monitoring behaviors are associated with increased anxiety among urban residents in Thailand. Public health interventions should consider implementing targeted alert systems during high-pollution periods and prioritize strategies to reduce PM2.5 emissions to alleviate public anxiety. Full article

In recent years, the use of unmanned aerial vehicles (UAVs), commonly known as drones, has significantly surged across civil, military, and commercial sectors. Ensuring reliable and efficient communication between UAVs and between UAVs and base stations is challenging due to dynamic factors such as altitude, mobility, environmental obstacles, and atmospheric conditions, which existing communication models fail to address fully. This paper presents a multi-ray channel model that captures the complexities of the airspace network, applicable to both ground-to-air (G2A) and air-to-air (A2A) communications to ensure reliability and efficiency within the network. The model outperforms conventional line-of-sight assumptions by integrating multiple rays to reflect the multipath transmission of UAVs. The multi-ray channel model considers UAV flights’ dynamic and 3-D nature and the conditions in which UAVs typically operate, including urban, suburban, and rural environments. A technique that calculates the received power at a target UAV within a networked airspace is also proposed, utilizing the reflective characteristics of UAV surfaces along with the multi-ray channel model. The developed multi-ray channel model further facilitates the characterization and performance evaluation of G2A and A2A communications. Additionally, this paper explores the effects of various factors, such as altitude, the number of UAVs, and the spatial separation between them on the power received by the target UAV. The simulation outcomes are validated by empirical data and existing theoretical models, providing comprehensive insight into the proposed channel modelling technique. Full article