Search Results (61)

Rare-earth nanoparticles (RE-NPs), particularly NaYF₄:Yb³⁺,Er³⁺, have emerged as a promising class of photoluminescent probes for bioimaging and sensing applications. These nanomaterials are characterized by their ability to absorb low-energy photons and emit higher-energy photons through an upconversion luminescence process. This process can be triggered by continuous-wave (CW) light excitation, providing a unique optical feature that is not exhibited by native biomolecules. However, the application of upconversion nanoparticles (UCNPs) in bioimaging requires systematic optimization to maximize the signal and ensure biological compatibility. In this work, we synthesized hexagonal-phase UCNPs (average diameter: 29 ± 3 nm) coated with polyacrylic acid (PAA) and established the optimal conditions for imaging human erythrocytes. The best results were obtained after a 4-h incubation in 100 mM HEPES buffer, using a nanoparticle concentration of 0.01 mg/mL and a laser current intensity of 250–300 mA. Under these conditions, the UCNPs exhibited minimal cytotoxicity and were found to predominantly localize at the erythrocyte membrane periphery, indicating surface adsorption rather than internalization. Additionally, a machine learning model (Random Forest) was implemented that classified the photoluminescent signal with 80% accuracy and 83% precision, with the signal intensity identified as the most relevant feature. This study establishes a quantitative and validated protocol that balances signal strength with cell integrity, enabling robust and automated image analysis. Full article

Coupling organic light-harvesting materials with lead halide perovskite quantum dots (LHP QDs) is an attractive approach that could provide great potential in optoelectronic applications owing to the diversity of organic materials available and the intriguing optical and electronic properties of LHP QDs. Here, we demonstrate energy collection by CsPbI₃ QDs from a near-infrared (NIR) light-harvesting upconversion system. The upconversion system consists of Pd-tetrakis-5,10,15,20-(p-methoxycarbonylphenyl)-tetraanthraporphyrin (PdTAP) as the sensitizer to harvest NIR photons and rubrene as the annihilator to generate upconverted photons via triplet fusion. Steady-state and time-resolved photoluminescence spectra reveal that CsPbI₃ QDs are energized via radiative energy transfer from the singlet excited rubrene with photophysics fidelity of respective components. In addition, a volumetric display demo incorporating CsPbI₃ QDs as light emitters employing triplet fusion upconversion was developed, showing bright luminescent images from CsPbI₃ QDs. These results present the feasibility of integrating organic light-harvesting systems and perovskite QDs, enabling diverse light harvesting and activation of perovskite materials for optoelectronic applications. Full article

This study presents the synthesis of NaYF₄: Er³⁺/Yb³⁺ upconversion luminescent nanomaterials using a wet chemistry method. The role of oleic acid in influencing the size, shape, and luminescent properties of the materials was also investigated. The results showed that, at a suitable oleic acid concentration of 10⁻³ M, the obtained nanoparticles exhibited a nearly spherical morphology with diameters ranging from 150 to 250 nm and predominantly display a hexagonal (β-NaYF₄) crystalline phase. Photoluminescence measurements under 980 nm laser excitation reveal that these nanoparticles emit strong, stable luminescence with narrow emission bands characteristic of Er³⁺ transitions. Subsequently, the nanoparticles were coated with a silica shell, functionalized with amine groups, and conjugated with IgG antibodies via glutaraldehyde (GA) to form the bio-nano complex β-NaYF₄: Er³⁺/Yb³⁺@SNGA-IgG. In vitro experiments using fluorescence microscopy demonstrated that the complex effectively labels HeLa cervical cancer cells. With its robust upconversion luminescence and excellent biocompatibility, the developed nanocomplex shows promising potential for rapid pathogen detection and other biomedical applications. Full article

A transparent fluoroborosilicate glass ceramic was designed for the controllable precipitation of fluoride nanocrystals and to greatly enhance the photoluminescence of active ions. Through the introduction of B₂O₃ into fluorosilicate glass, the melting temperature was decreased from 1400 to 1050 °C, and the abnormal crystallization in the fabrication process of fluorosilicate glass was avoided. More importantly, the controlled crystallizations of KZnF₃ and KYb₃F₁₀ in fluoroborosilicate glass ceramics enhanced the emission of Mn²⁺ and Mn²⁺–Yb³⁺ dimers by 6.7 and 54 times, respectively. Moreover, the upconversion emission color of glass ceramic could be modulated from yellow to white and blue by adjusting the Yb³⁺ concentration. The well-designed glass ceramic is a novel and significant compound to simultaneously provide efficiently coordinated sites for transition metal and rare earth ions. More importantly, the design strategy opens a new way for engineering high-quality oxy-fluoride glass ceramics with properties of excellent stability, controllable nano-crystallization and high-efficiency photoluminescence. Full article

The performance optimization of photoluminescent (PL) materials is a hot topic in the field of applied materials research. There are many different crystal defects in photoluminescent materials, which can have a significant impact on their optical properties. The luminescent properties and chemical stability of materials can be effectively improved by adjusting lattice defects in crystals. We systematically studied the effect of doping ions on the energy transfer upconversion mechanism in different defect crystals by changing the matrix alkali metal ions. Meanwhile, the influence mechanism of crystal defect distribution on luminescence performance is explored by adjusting the ratio of Na–Li. The PL spectra indicate that changing the alkaline ions significantly affects the luminescence performance and efficiency of UCNPs. The change in ion radius leads to substitution or gap changes in the main lattice, which may alter the symmetry and strength of the crystal field around doped RE ions, thereby altering the UCL performance. Additionally, we demonstrated the imaging capabilities of the synthesized upconversion nanoparticles (UCNPs) in cellular environments using fluorescence microscopy. The results revealed that Na_0.9Li_0.1LuF₄–Yb, Er nanoparticles exhibited significantly enhanced fluorescence intensity in cell imaging compared to other compositions. We further investigated the mechanism by which structural defects formed by doping ions in UCNPs with different alkali metals affect energy transfer upconversion (ETU). This work emphasizes the importance of defect regulation in the ETU mechanism to improve the limitations of crystal structure on the luminescence performance and promote the future application of upconversion nanomaterials, which will provide important theoretical references for the exploration of high-performance luminescent materials in the future. Full article

Cancer therapy is constantly evolving, with a growing emphasis on targeted and efficient treatment options. In this context, graphene quantum dots (GQDs) have emerged as promising agents for precise drug and gene delivery due to their unique attributes, such as high surface area, photoluminescence, up-conversion photoluminescence, and biocompatibility. GQDs can damage cancer cells and exhibit intrinsic photothermal conversion and singlet oxygen generation efficiency under specific light irradiation, enhancing their effectiveness. They serve as direct therapeutic agents and versatile drug delivery platforms capable of being easily functionalized with various targeting molecules and therapeutic agents. However, challenges such as achieving uniform size and morphology, precise bandgap engineering, and scalability, along with minimizing cytotoxicity and the environmental impact of their production, must be addressed. Additionally, there is a need for a more comprehensive understanding of cellular mechanisms and drug release processes, as well as improved purification methods. Integrating GQDs into existing drug delivery systems enhances the efficacy of traditional treatments, offering more efficient and less invasive options for cancer patients. This review highlights the transformative potential of GQDs in cancer therapy while acknowledging the challenges that researchers must overcome for broader application. Full article

Upconversion nanoparticles (UCNPs) are well-reported for bioimaging. However, their applications are limited by low luminescence intensity. To enhance the intensity, often the UCNPs are coated with macromolecules or excited with high laser power, which is detrimental to their long-term biological applications. Herein, we report a novel approach to prepare co-doped CaF₂:Yb³⁺ (20%), Er³⁺ with varying concentrations of Er (2%, 2.5%, 3%, and 5%) at ambient temperature with minimal surfactant and high-pressure homogenization. Strong luminescence and effective red emission of the UCNPs were seen even at low power and without functionalization. X-ray diffraction (XRD) of UCNPs revealed the formation of highly crystalline, single-phase cubic fluorite-type nanostructures, and transmission electron microscopy (TEM) showed co-doped UCNPs are of $~$12 nm. The successful doping of Yb and Er was evident from TEM–energy dispersive X-ray analysis (TEM-EDAX) and X-ray photoelectron spectroscopy (XPS) studies. Photoluminescence studies of UCNPs revealed the effect of phonon coupling between host lattice (CaF₂), sensitizer (Yb³⁺), and activator (Er³⁺). They exhibited tunable upconversion luminescence (UCL) under irradiation of near-infrared (NIR) light (980 nm) at low laser powers (0.28–0.7 W). The UCL properties increased until 3% doping of Er³⁺ ions, after which quenching of UCL was observed with higher Er³⁺ ion concentration, probably due to non-radiative energy transfer and cross-relaxation between Yb³⁺-Er³⁺ and Er³⁺-Er³⁺ ions. The decay studies aligned with the above observation and showed the dependence of UCL on Er³⁺ concentration. Further, the UCNPs exhibited strong red emission under irradiation of 980 nm light and retained their red luminescence upon internalization into cancer cell lines, as evident from confocal microscopic imaging. The present study demonstrated an effective approach to designing UCNPs with tunable luminescence properties and their capability for cellular imaging under low laser power. Full article

The upconversion response of Er³⁺ sensitized by Yb³⁺ in various crystalline hosts and illuminated with a laser light at around 980 nm revealed certain spectral shapes that are typical for each of the crystalline matrices containing the dopants. The purpose of this work was to measure the upconversion response of Er³⁺ as a dopant in Y₂TiO₅, sensitized by Yb³⁺, at different concentrations relative to the substituted Y³⁺ ion, and to reveal the subtleties of the mechanisms of the energy transfers between them and the lattice. Therefore, we synthesized Y₂TiO₅ ceramic samples doped with different concentrations of Er³⁺ and Yb³⁺, below 10% (mol), in order to minimize the distortion of the lattice. The oxide powders, obtained using the sol–gel method, as well as the ceramics were structurally and morphologically characterized using an X-ray diffraction analysis and scanning electron microscopy. When the ceramic samples were irradiated with an NIR laser light, it was found that, at a wavelength variation of only 2 nm of the incident radiation, from 973.5 nm to 975.5 nm, the upconversion spectra differed significantly. This nonlinearity is notable because it is not present in the case of other crystalline host matrices studied by us since the literature lacks information on this subject. We also correlated this effect with the simulated distribution of the average distances between Er³⁺ and Yb³⁺ ions in the host matrix. Full article

Gallium oxide (Ga₂O₃) is an emerging wide bandgap semiconductor promising a wide range of important applications. However, mass production of high-quality crystalline Ga₂O₃ still suffers from limitations associated with poor reproducibility and low efficiency. Low-temperature-grown amorphous Ga₂O₃ demonstrates comparable performance with its crystalline counterparts. Lanthanide Er³⁺-doped Ga₂O₃ (Ga₂O₃: Er) possesses great potential for developing light-emitting devices, photodetectors, solid-state lasers, and optical waveguides. The host circumstance can exert a crystal field around the lanthanide dopants and strongly influence their photoluminescence properties. Here, we present a systematical study of the impact of amorphous-to-crystalline transition on the upconversion photoluminescence in Ga₂O₃: Er thin films. Through controlling the growth temperature of Ga₂O₃: Er films, the upconversion luminescence of crystalline Ga₂O₃: Er thin film is strongly enhanced over 100 times that of the amorphous Ga₂O₃: Er thin film. Moreover, the variation of photoluminescence reflects the amorphous-to-crystalline transformation of the Ga₂O₃: Er thin films. These results will aid further designs of favorable optoelectronic devices integrated with lanthanide-doped Ga₂O₃ thin films. Full article

To develop novel luminescent materials for optical temperature measurement, a series of Yb³⁺- and Er³⁺-doped Ca₃Sc₂Si₃O₁₂ (CSS) upconversion (UC) phosphors were synthesized by the sol–gel combustion method. The crystal structure, phase purity, and element distribution of the samples were characterized by powder X-ray diffraction and a transmission electron microscope (TEM). The detailed study of the photoluminescence emission spectra of the samples shows that the addition of Yb³⁺ can greatly enhance the emission of Er³⁺ by effective energy transfer. The prepared Yb³⁺ and Er³⁺ co-doped CSS phosphors exhibit green emission bands near 522 and 555 nm and red emission bands near 658 nm, which correspond to the ²H_11/2→⁴I_15/2, ⁴S_3/2→⁴I_15/2, and ⁴F_9/2→⁴I_15/2 transitions of Er³⁺, respectively. The temperature-dependent behavior of the CSS:0.2Yb³⁺,0.02Er³⁺ sample was carefully studied by the fluorescence intensity ratio (FIR) technique. The results indicate the excellent sensitivity of the sample, with a maximum absolute sensitivity of 0.67% K⁻¹ at 500 K and a relative sensitivity of 1.34% K⁻¹ at 300 K. We demonstrate here that the temperature measurement performance of FIR technology using the CSS:Yb³⁺,Er³⁺ phosphor is not inferior to that of infrared thermal imaging thermometers. Therefore, CSS:Yb³⁺,Er³⁺ phosphors have great potential applications in the field of optical thermometry. Full article

Anti-Stokes photoluminescence (ASPL) is an up-conversion phonon-assisted process of radiative recombination of photoexcited charge carriers when the ASPL photon energy is above the excitation one. This process can be very efficient in nanocrystals (NCs) of metalorganic and inorganic semiconductors with perovskite (Pe) crystal structure. In this review, we present an analysis of the basic mechanisms of ASPL and discuss its efficiency depending on the size distribution and surface passivation of Pe-NCs as well as the optical excitation energy and temperature. When the ASPL process is sufficiently efficient, it can result in an escape of most of the optical excitation together with the phonon energy from the Pe-NCs. It can be used in optical fully solid-state cooling or optical refrigeration. Full article

Novel hybrid core-shell structures, in which up-converting (UC) NaYF₄:Yb,Tm core converts near-infrared (NIR) to visible (Vis) light via multiphoton up-conversion processes, while anatase TiO₂-acetylacetonate (TiO₂-Acac) shell ensures absorption of the Vis light through direct injection of excited electrons from the highest-occupied-molecular-orbital (HOMO) of Acac into the TiO₂ conduction band (CB), were successfully synthesized by a two-step wet chemical route. Synthesized NaYF₄:Yb,Tm@TiO₂-Acac powders were characterized by X-ray powder diffraction, thermogravimetric analysis, scanning and transmission electron microscopy, diffuse-reflectance spectroscopy, Fourier transform infrared spectroscopy, and photoluminescence emission measurement. Tetracycline, as a model drug, was used to investigate the photocatalytic efficiencies of the core-shell structures under irradiation of reduced power Vis and NIR spectra. It was shown that the removal of tetracycline is accompanied by the formation of intermediates, which formed immediately after bringing the drug into contact with the novel hybrid core-shell structures. As a result, ~80% of tetracycline is removed from the solution after 6 h. Full article

Herein, significant enhancement of second- and third-harmonic generation efficiencies in a 1 mol% Er³⁺ and 0.07 mol% Fe²⁺-doped lithium niobate single-crystal plate were achieved after ablating periodic cylindrical pit arrays on the surface. Enhanced absorption and reduced transmittance of light were measured when the incident light signal passed through the patterned sample. Enhanced photoluminescence and two-photon-pumped upconversion emission spectra were also explored to obtain more details on the efficiency gains. The excitation-energy-dependent second-harmonic generation efficiency was measured, and an enhancement as high as 20-fold was calculated. The conversion efficiency of second-harmonic generation is 1 to 3 orders higher than that from other lithium niobite metasurfaces and nanoantennas. This work provides a convenient and effective method to improve the nonlinear conversion efficiency in a thin lithium niobite plate, which is desirable for applying to integrated optical devices. Full article

In this study nitrogen-doped carbon quantum dots/graphitic carbon nitride nanosheet (CNQD) composites with different contents of nitrogen-doped carbon quantum dots (NCQDs; 2, 4, 6, and 8 wt%) were synthesized. The morphological, physicochemical, and photoelectrochemical properties were investigated using complementary methods such as scanning electron microscopy (SEM), powder X-ray diffraction (pXRD), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), UV/Vis spectroscopy in diffuse reflectance (DRS), photoluminescence (PL), nitrogen physisorption (BET), photocurrent response, and electrochemical impedance spectroscopy (EIS). The photocatalytic activity of the synthesized materials was assessed during diclofenac (DCF) degradation in an aqueous solution under visible light irradiation. As a result, improved photocatalytic efficiency in DCF degradation was observed for all the CNQD composites compared with bulk graphitic carbon nitride (bCN) and nanosheet g-C₃N₄ (CNS). The fastest DCF degradation was observed for the 6 wt% NCQD on the surface of CNS (CNQD-6), which removed 62% of DCF in 3 h, with an associated k value of 5.41 × 10⁻³ min⁻¹. The performance test results confirmed the contribution of NCQDs to enhancing photocatalytic activity, leading to an improvement factor of 1.24 over bCN. The morphology of the CNS and the synergistic interaction between NCQDs and CNS were essential elements for enhancing photocatalytic activity. The photoelectrochemical data and photoluminescence analyses showed the efficient migration of photoexcited electrons from NCQDs to the CNS. The reduced charge recombination rates in CNQD photocatalysts might be due to the synergistic interaction between NCQDs and CNS and the unique up-conversion photoluminescence properties of NCQDs. Further investigations revealed that the photogenerated superoxide radicals (•O₂⁻) predominated in the degradation of DCF, and this photocatalyst had good reusability and toxicity reduction abilities. This work provides insight into the effects of NCQDs on the CNS surface to enhance its potential to remove emerging organic pollutants from water and wastewater. Full article

Non-invasive visualization and monitoring of tissue-engineered structures in a living organism is a challenge. One possible solution to this problem is to use upconversion nanoparticles (UCNPs) as photoluminescent nanomarkers in scaffolds. We synthesized and studied scaffolds based on natural (collagen—COL and hyaluronic acid—HA) and synthetic (polylactic-co-glycolic acids—PLGA) polymers loaded with β-NaYF₄:Yb³⁺, Er³⁺ nanocrystals (21 ± 6 nm). Histomorphological analysis of tissue response to subcutaneous implantation of the polymer scaffolds in BALB/c mice was performed. The inflammatory response of the surrounding tissues was found to be weak for scaffolds based on HA and PLGA and moderate for COL scaffolds. An epi-luminescent imaging system with 975 nm laser excitation was used for in vivo visualization and photoluminescent analysis of implanted scaffolds. We demonstrated that the UCNPs’ photoluminescent signal monotonously decreased in all the examined scaffolds, indicating their gradual biodegradation followed by the release of photoluminescent nanoparticles into the surrounding tissues. In general, the data obtained from the photoluminescent analysis correlated satisfactorily with the histomorphological analysis. Full article