Search Results (25)

Membrane separation is a promising, low-energy technology for purifying turquoise hydrogen from methane pyrolysis streams. However, there is a critical knowledge gap between the performance of membrane materials and the practical application of large-scale modules under realistic process conditions. This study evaluates commercial polyimide and polysulfone hollow fiber membranes for H₂/CH₄ separation. The effect of feed composition and pressure on the membrane separation performance were studied, revealing that the separation efficiency is overwhelmingly dominated by concentration polarization, which reduced the H₂/CH₄ separation factor by up to 80% compared to ideal values. Despite this, by optimizing process conditions, we successfully achieved a permeate purity of 99.3% H₂ at 85% recovery. Furthermore, Aspen Plus simulations of an integrated pyrolysis reactor with the membrane unit and a recycle stream demonstrate significant process benefits. The integration increased the H₂ production rate from 10.3 to 17.6 kmol/h and substantially reduced the specific energy consumption from 40.3 to 24.9 kJ/g H₂ compared to non-integrated systems. This work shows that a membrane process can improve not only the product H₂ purity but also the overall energy efficiency of a turquoise hydrogen production process. Full article

A recently discovered turquoise deposit in the Fangshankou area of Dunhuang, Gansu Province, has been relatively understudied compared to turquoise from other sources due to its short mining history. Currently, no relevant research literature on this deposit has been identified. Therefore, a systematic mineralogical and spectroscopic study of Dunhuang turquoise samples was conducted using conventional gemological testing methods, combined with techniques such as X-ray powder diffraction (XRD), electron probe microanalysis (EPMA), Fourier transform infrared spectroscopy (FTIR), laser Raman spectroscopy, ultraviolet-visible spectroscopy (UV-Vis), and X-ray fluorescence (XRF) mapping. The test results indicate that the turquoise samples from this area have a density ranging from 2.40 to 2.77 g/cm³ and a refractive index between 1.59 and 1.65. The samples generally exhibit a cryptocrystalline structure, with some displaying spherulitic radial and radial fibrous structures. The texture is relatively dense and hard, with particle diameters less than 10 μm. Chemically, the turquoise samples from this region are characterized by high Fe and Si content and relatively low Cu content. Samples contain, in addition to the turquoise mineral, other minerals such as quartz, goethite and alunite, etc. The oxide content ranges are as follows: w(P₂O₅) between 23.83% and 33.66%, w(Al₂O₃) between 26.47% and 33.36%, w(CuO) between 5.26% and 7.91%, w(FeO) between 2.46% and 4.11%, and w(SiO₂) between 0.97% and 10.75%. In the infrared absorption spectra of Dunhuang turquoise, the bands at 3510 cm⁻¹ and 3464 cm⁻¹ are attributed to ν(OH)⁻ stretching vibrations, while the bands near 3308 cm⁻¹ and 3098 cm⁻¹ are assigned to ν(M-H₂O) stretching vibrations. The infrared absorption bands near 1110 cm⁻¹ and 1058 cm⁻¹ are due to v[PO₄]³⁻ stretching vibrations, and the bands near 651 cm⁻¹, 575 cm⁻¹, and 485 cm⁻¹ are attributed to δ[PO₄]³⁻ bending vibrations. A clear correlation exists between the Raman spectral features and the infrared spectra of this turquoise. The hue and chroma of the turquoise from this area are primarily influenced by the mass fractions of Fe³⁺, Cu²⁺, and Fe²⁺, as well as their bonding modes with water molecules. The ultraviolet-visible spectra are attributed to O²⁻–Fe³⁺ charge transfer, the ⁶A₁–⁴E_g + ⁴A₁ transition of Fe³⁺ ions (D⁵ configuration) in hydrated iron ions [Fe(H₂O)₆]³⁺, and the spin-allowed ²E_g–²T_2g transition of Cu²⁺ ions in hydrated copper ions [Cu(H₂O)₄]²⁺. Associated minerals include goethite, alunite, jarosite, and quartz. Fine-grained quartz often exists as secondary micron-sized independent mineral phases, which have a certain impact on the quality of the turquoise. Full article

Current histological staining methods for intestinal tissue analysis face limitations in simultaneously visualizing multiple tissue components, often requiring multiple sequential stains that increase processing time and tissue consumption. This proof-of-concept study aimed to define and develop a pentachromatic staining method for enhanced visualization of gastrointestinal tissue architecture. We developed the Pentachroma O-H method, an original protocol using readily available histological reagents (Alcian Blue pH 2.5, Weigert’s resorcin–fuchsin, Mayer’s hematoxylin, and Van Gieson’s solution) applied in an optimized sequence. The protocol was tested on healthy human ileum tissue obtained from surgical specimens as proof of concept. Thirty serial sections were stained with Pentachroma O-H and compared to adjacent sections stained with conventional hematoxylin–eosin (H&E) to document the emerging morphological characteristics of this original stain. Pentachroma O-H achieved distinct five-color differentiation in approximately 45 min: acidic mucins appeared turquoise–blue, collagen fibers red, elastic fibers black–purple, smooth muscle and erythrocyte cytoplasm yellow, and nuclei blue–black. The method clearly delineated intestinal architecture, including mucosal goblet cells, muscularis mucosae, connective tissue vasculature (parietal smooth muscle and elastic laminae), fibers, and cellular components, as well as lymphoid tissue aggregates and infiltrates, with improved contrast compared to H&E. All tissue components were simultaneously visualized in single sections with excellent morphological preservation. This first description of Pentachroma O-H demonstrates its capability to provide comprehensive ileum tissue visualization equivalent to multiple traditional special stains in a single, efficient protocol, offering significant potential advantages for gastrointestinal pathology assessment and warranting future validation studies across diverse tissue types and pathological conditions. Full article

Methane pyrolysis for turquoise hydrogen production faces dual challenges of reactor clogging and carbon contamination, particularly the difficulty in extracting high-purity carbon from molten media. While most existing studies focus on two-phase systems, carbon products are inevitably contaminated by the medium. This work presents a novel dual-layer bubble column reactor (Cu₀.₄₅Bi₀.₅₅ alloy/NaCl salt) operating at 900–1100 °C. The system achieved continuous operation for over 72 h without clogging. Crucially, the selected NaCl salt offers distinct advantages: its low cost, non-toxicity and high water solubility facilitate effective carbon separation strategies. This configuration reduced metal contamination in carbon from 52.4 wt% to below 4.0 wt%, with post-treatment achieving ultralow metal content below 1.5 wt%. Moreover, the molten salt environment induced valuable structural modifications in the carbon. This work provides an economically viable process for co-producing clean hydrogen and high-value carbon, addressing key technical barriers in molten media reactors. Full article

Biofilms are involved in both acute and chronic respiratory infections. While cigarette smoke extract (CSE) has been shown to increase biofilm formation by certain respiratory pathogens, the impact of emerging heated tobacco products (HTPs) remains unclear. We compared the effects of CSE with two HTP aerosol extracts on biofilm biomass and metabolic activity of common respiratory pathogens. Reference strains of Staphylococcus aureus, Pseudomonas aeruginosa, Klebsiella pneumoniae, Streptococcus pneumoniae, and non-typeable Haemophilus influenzae (NTHi), known respiratory pathogens, were grown as 24 h biofilms in 96-well plates (48 h for S. aureus and P. aeruginosa). These were exposed to CSE and HTP extracts from iQOS™ (Terea™ Turquoise, ILUMA™ device) and glo™ (neo™ Azure, HyperPro™ device), prepared in liquid culture media. Biofilm density was quantified by the crystal violet assay. Metabolic activity (planktonic and biofilm) was assessed by MTT reduction to formazan. At 24 h, CSE markedly reduced H. influenzae biomass versus iQOS™, glo™, and control, while K. pneumoniae, S. aureus, and P. aeruginosa showed no significant biomass differences. At 48 h, CSE significantly increased biomass in P. aeruginosa and S. aureus versus other exposures. Biofilm MTT assay measured metabolic activity increased in CSE exposure for K. pneumoniae versus iQOS™ and control, and for S. aureus versus control. Overall, HTP extracts showed limited, inconsistent effects compared with CSE, indicating combustion-derived constituents more strongly promote biofilm maturation in this model. Full article

Methane pyrolysis produces hydrogen (H₂) with solid carbon black as a co-product, eliminating direct CO₂ emissions and enabling a low-carbon supply when combined with renewable or low-carbon heat sources. In this study, we propose a hybrid geothermal pyrolysis configuration in which an enhanced geothermal system (EGS) provides base-load preheating and isothermal holding, while either electrical or solar–thermal input supplies the final temperature rise to the catalytic set-point. The work addresses four main objectives: (i) integrating field-scale geothermal operating envelopes to define heat-integration targets and duty splits; (ii) assessing scalability through high-pressure reactor design, thermal management, and carbon separation strategies that preserve co-product value; (iii) developing a techno-economic analysis (TEA) framework that lists CAPEX and OPEX, incorporates carbon pricing and credits, and evaluates dual-product economics for hydrogen and carbon black; and (iv) reorganizing state-of-the-art advances chronologically, linking molten media demonstrations, catalyst development, and integration studies. The process synthesis shows that allocating geothermal heat to the largest heat-capacity streams (feed, recycle, and melt/salt hold) reduces electric top-up demand and stabilizes reactor operation, thereby mitigating coking, sintering, and broad particle size distributions. High-pressure operation improves the hydrogen yield and equipment compactness, but it also requires corrosion-resistant materials and careful thermal-stress management. The TEA indicates that the levelized cost of hydrogen is primarily influenced by two factors: (a) electric duty and the carbon intensity of power, and (b) the achievable price and specifications of the carbon co-product. Secondary drivers include the methane price, geothermal capacity factor, and overall conversion and selectivity. Overall, geothermal-assisted methane pyrolysis emerges as a practical pathway to turquoise hydrogen, if the carbon quality is maintained and heat integration is optimized. The study offers design principles and reporting guidelines intended to accelerate pilot-scale deployment. Full article

Green soybean (Glycine max), commonly known as vegetable soybean or edamame, is harvested at reproductive stages 6 to 7 of pod development. At this stage, the seeds are fully grown but still green and not yet mature. Green soybean is a nutritious food high in protein and micronutrients; however, low temperatures negatively impact its production and quality. The mechanisms underlying cold stress in green soybean remain unclear. This study aims to identify differentially expressed genes (DEGs) and key pathways associated with cold tolerance through a comprehensive transcriptomic analysis of cold stress responses in a cold-tolerant green soybean variety at three time points: 3 h, 12 h, and 24 h. We identified 3415 common DEGs across three time points, with significant enrichment in categories such as “rhythmic process”, “response to blue light”, “fatty acid metabolism”, and “fatty acid degradation”. Notably, expression patterns of these pathways were similar after 3 and 24 h of cold exposure. Weighted gene co-expression network analysis (WGCNA) revealed 20 distinct modules, with two principal modules—turquoise and blue—correlating with rhythmic processes and fatty acid pathways. Additionally, we analyzed the genetic regulatory networks within these modules and identified four candidate genes (Glyma.04G015200, Glyma.18G202800, Glyma.02G123700 and Glyma.13G266500) potentially linked to cold tolerance. This study enhances our understanding of the molecular mechanisms of cold stress in green soybean and highlights key cold-responsive genes for further research. Full article

The global campaign to reach net zero will necessitate the use of hydrogen as an efficient way to store renewable electricity at large scale. Methane pyrolysis is rapidly gaining traction as an enabling technology to produce low-cost hydrogen without directly emitting carbon dioxide. It offers a scalable and sustainable alternative to steam reforming whilst being compatible with existing infrastructure. The process most commonly uses thermal energy to decompose methane (CH₄) into hydrogen gas (H₂) and solid carbon (C). The electrification of this reaction is of great significance, allowing it to be driven by excess renewable electricity rather than fossil fuels, and eliminating indirect emissions. This review discusses the most recent technological advances in electrified methane pyrolysis and the relative merits of the mainstream reactor technologies in this space (plasma, microwave, fluidised bed, and direct resistive heating). This study also examines the economic viability of the process, considering energy costs, and the market potential of both turquoise hydrogen and solid carbon products. Whilst these technologies offer emission-free hydrogen production, challenges such as carbon deposition, reactor stability, and high energy consumption must be addressed for large-scale adoption. Future research should focus on process optimisation, advanced reactor designs, and policy frameworks to support commercialisation. With continued technological innovation and sufficient investment, electrified methane pyrolysis has the potential to become the primary route for sustainable production of hydrogen at industrial scale. Full article

Through an integrated multi-omics analysis of rumen microbial communities, muscle transcriptomes, metabolic profiles, and liver metabolic profiles, this study systematically compared high- and low-performing lambs to elucidate their divergent effects on meat quality attributes and growth development. A total of 100 male lambs with similar birth weight (3.07 ± 0.06 kg) were selected within 72 h. All test lambs were synchronized weaning at 45 days of age and uniformly fed the same diet (total mixed ration) in the same pen until 180 days of age, with ad libitum access to food and water throughout this period. Subsequently, the eight lambs with the highest (HADG) and lowest (LADG) average daily gains were slaughtered for performance evaluation and multi-omics analysis. This study found that HADG lambs increased body weight, muscle fiber diameter, eye muscle area, improved amino acid (histidine, arginine, valine, isoleucine, essential amino acid/total amino acid, and essential amino acid/nonessential amino acid), and fatty acid (linoleic acid, behenic acid, and arachidonic acid) composition enhanced rumen enzymes (pepsase, lipase, xylanase, amylase, and carboxymethyl cellulose) and promoted efficient fermentation (p < 0.05). Analysis of microbial populations indicated a notable increase in Prevotella levels within the rumen of HADG lambs. Furthermore, the rumen markers Schwartzia and Streptococcus exhibited significant correlations with differential meat quality traits. Analysis of the muscle transcriptome indicated a significant correlation between the turquoise module and host phenotypes, particularly body weight. Additionally, muscle metabolism is primarily concentrated within the black module; however, it exhibits a significant correlation with the host body phenotype in the yellow module (p < 0.05). Moreover, liver metabolites, rumen microbes, host phenotype, and muscle transcripts were significantly correlated (p < 0.05). In conclusion, the interactions among rumen microbes, muscle, and liver in lambs promote rumen fermentation, which in turn regulate muscle transcriptional activity and modify metabolic profiles in both the liver and muscle. Moreover, PCK1, SPP1, FGF7, NR4A1, DUSP5, GADD45B, etc., can be candidate genes for muscle growth and development. This finding provides a theoretical basis for further exploiting the production potential of Hu lambs. Full article

Background: The accumulation of secondary metabolites in medicinal plants is often influenced by a variety of factors, and rhizosphere microorganisms typically engage in complex interactions with their host plants. Crepis napifera (Franch.) Babc., a regionally significant medicinal plant, contains a diverse array of terpenoids and demonstrates substantial potential for resource development and utilization. Methods: Transcriptome sequencing, metabolomic profiling, and 16S rRNA gene amplicon sequencing were employed to assess the transcriptional expression patterns, metabolic variations, and rhizosphere microbial community composition of C. napifera (Franch.) Babc. roots distributed across various regions. Results: A total of 3679, 8615, and 11,333 differentially expressed genes (DEGs) were identified in the pairwise comparisons between H1 vs. H2, H2 vs. H3, and H1 vs. H3, respectively. Notably, 497 DEGs were consistently detected across all three comparisons. Additionally, Weighted Gene Co-expression Network Analysis (WGCNA) revealed that the expression levels of genes within the turquoise and yellow modules exhibited a significant positive correlation with elevation. In total, 462 differentially expressed metabolites (DEMs) were identified across the same comparisons. Among these compounds, terpenoids, phenolic acids, amino acids and their derivatives, lipids, and alkaloids accounted for 62.98% of the total differential metabolite content. The accumulation patterns of DEMs varied significantly across different regions in the roots of C. napifera (Franch.) Babc. under the three altitude conditions. In response to environmental conditions and the survival strategy of C. napifera (Franch.) Babc. in alpine areas, an investigation into the rhizosphere microbial community was conducted. Four key microbial genera were identified as being correlated with terpenoid biosynthesis and plant nutritional metabolism. Specifically, Pedosphaera, Acidothermus, and Nevskia exhibited terpene biosynthesis capabilities. Additionally, Herbaspirillum, a common microorganism involved in plant nitrogen fixation, respiration, carbon metabolism, and cell wall metabolism, was also enriched in the rhizosphere of C. napifera (Franch.) Babc. These findings suggested that C. napifera (Franch.) Babc. might recruit these microorganisms to enhance its resistance to environmental stress in alpine areas. Conclusions: The accumulation of terpene in C. napifera (Franch.) Babc. across different regions was influenced by transcriptional changes. The rhizosphere microbial communities also changed during this process, showing a recruitment effect that enhances plant growth and offers potential value. Full article

The polyol method under a single pot has successfully produced a coating of CuO, TiO₂, and the combination of CuO/TiO₂ around Ag NWs under sequential addition. The Ag NWs and their coating with a pure metal oxide and a hybrid of metal oxide were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM) coupled with EDX, X-ray photoelectron spectroscopy (XPS), UV–Visible, photoluminescent (PL) spectroscopy, and cyclic voltammetry (CV). The formation of ultra-thin NWs was also been seen in the presence of the TiO₂ coating. The ultra-thin and co-axial coating of each metal oxide and their hybrid form preserved the SPR of the Ag NWs and demonstrated photon harvesting from the 400–800 nm range. The band gap hybridization was confirmed by CV for the Ag@CuO/TiO₂ design, which made the structure a reliable catalyst. Therefore, the material expresses excellent photocatalytic activities for carcinogenic textile dyes such as turquoise blue (TB), sapphire blue (SB), and methyl orange (MO), with and without the reagent H₂O₂. The hybrid form (i.e., Ag@CuO/TiO₂) exhibited degradation within 6 min in the presence of H₂O₂. Additionally, the material showed antibacterial activities against various bacteria (Pseudomonas aeruginosa, Escherichia coli, Staphylococcus aureus, Bacillus subtilis, and Bacillus pumilus) when assayed using broth media. Therefore, the materials have established degrading and disinfection roles suitable for environmental perspectives. The role of coating with each metal oxide and their hybrid texture further improved the growth of Ag NWs. The preparatory route possibly ensued metal–metal oxide and metal–hybrid metal oxide Schottky junctions, which would expectedly transform it into a diode material for electronic applications. Full article

Background: Soybean mosaic virus (SMV) is a globally prevalent and detrimental virus that belongs to the Potyvirus genus. Pathogenic viruses of this genus are typically linear in shape, with dimensions ranging between 630 and 750 nm, and are composed of single-stranded RNA and proteins. We have developed an SMV-resistant soybean line, Dongnong 93-046, which has no significant changes in disease resistance identification in the adult plants and has neat grains with no obvious brown or black markings. To explore the defense mechanisms of soybean against SMV, we performed comparative transcriptomic sequencing of the leaves between the Dongnong 93-046 inoculated with SMV at 8 h (T) and the non-inoculated control (C) on the HiSeq2000 platform. In addition, we performed non-targeted metabolomic sequencing of leaves from the treatment and control groups. Results: We identified a total of 41,189 differentially expressed genes (DEGs). A total of 9809 differentially expressed genes (DEGs) met the criteria of |Log2FC (Fold Change)| ≥ 1 and adjusted p-value ≤ 0.001. Among the 41,189 DEGs identified, 9196 exhibited FPKM values greater than 10. KEGG pathway enrichment analysis of the 9809 DEGs revealed significant enrichment of genes involved in resistance-related pathways such as plant–pathogen interaction, linoleic acid metabolism, mitogen-activated protein kinase (MAPK) signaling pathway, and plant hormone signaling transduction. Functional analysis using MapMan software identified multiple DEGs that were associated with pathways such as jasmonate synthesis and phenylpropanoid biosynthesis. Weighted gene co-expression network analysis (WGCNA) using the differential metabolites and the 9196 DEGs revealed a strong correlation between gene clusters within the Turquoise module and the content of jasmonate-related metabolites. Further functional enrichment analysis of the 894 genes within the gene clusters showed a significant and repeated enrichment of pathways related to plant–pathogen interaction, linoleic acid metabolism, and plant hormone signaling transduction. Subsequent focused pathway analysis identified key genes involved in plant hormone signaling transduction pathways, such as the jasmonate ZIM domain protein Glyma.16G010000, the gene Glyma.01G235600 encoding the essential diterpene reductase required for jasmonate synthesis in the jasmonate biosynthesis pathway, and the transcription factor Glyma.02G232600 involved in the plant–pathogen interaction pathway, among others. This study provides a theoretical framework for understanding the resistance mechanism of soybean cultivar Dongnong 93-046 against the SMV N1 strain, offers potential gene resources for breeding soybean varieties with resistance to SMV, and paves the way for new strategies to control SMV infection, enhance resistance, and improve crop yield and quality. Full article

The leaf is not only the main site of photosynthesis, but also an important organ reflecting plant salt tolerance. Discovery of salt-stress-responding genes in the leaf is of great significance for the molecular improvement of salt tolerance in wheat varieties. In this study, transcriptome sequencing was conducted on the leaves of salt-tolerant wheat germplasm CH7034 seedlings at 0, 1, 6, 24, and 48 h after NaCl treatment. Based on weighted gene correlation network analysis of differentially expressed genes (DEGs) under salt stress, 12 co-expression modules were obtained, of which, 9 modules containing 4029 DEGs were related to the salt stress time-course. These DEGs were submitted to the Wheat Union database, and a total of 904,588 SNPs were retrieved from 114 wheat germplasms, distributed on 21 wheat chromosomes. Using the R language package and GAPIT program, association analysis was performed between 904,588 SNPs and leaf salt injury index of 114 wheat germplasms. The results showed that 30 single nucleotide polymorphisms (SNPs) from 15 DEGs were associated with salt tolerance. Then, nine candidate genes, including four genes (TaBAM, TaPGDH, TaGluTR, and TaAAP) encoding enzymes as well as five genes (TaB12D, TaS40, TaPPR, TaJAZ, and TaWRKY) encoding functional proteins, were identified by converting salt tolerance-related SNPs into Kompetitive Allele-Specifc PCR (KASP) markers for validation. Finally, interaction network prediction was performed on TaBAM and TaAAP, both belonging to the Turquoise module. Our results will contribute to a further understanding of the salt stress response mechanism in plant leaves and provide candidate genes and molecular markers for improving salt-tolerant wheat varieties. Full article

Turquoise hydrogen is produced through a process of separating carbon into solid carbon based on fossil fuels and refers to hydrogen that does not produce carbon dioxide. In this study, the characteristics of turquoise hydrogen production through a methane thermal cracking reaction using an arc plasma torch were investigated. The plasma torch operated stably under high voltage and transport gas flow conditions. The composition of the gas generated from the methane plasma reaction was analyzed using an online IR gas analyzer and GC-FID. The experimental results show that the hydrogen yield decreased to 16.4% as the methane feed rate increased but increased to 58.8% as the plasma power increased. Under these conditions, the yield of solid carbon, a valuable byproduct, was also shown to increase to 62.9%. In addition, solid carbon showed high-temperature heat-treated characteristics based on its generation location. Carbon oxides such as CO and CO₂ are rarely generated under any experimental conditions. Consequently, it can be considered that plasma thermal cracking is a promising technology for CO₂-free hydrogen production and a valuable solid carbon. Full article

We describe a competitive colorimetric assay that enables rapid and sensitive detection of galactose and reduced nicotinamide adenine dinucleotide (NADH) via colorimetric readouts and demonstrate its usefulness for monitoring NAD+-driven enzymatic reactions. We present a sensitive plasmonic sensing approach for assessing galactose concentration and the presence of NADH using galactose dehydrogenase-immobilized gold nanostars (AuNS-PVP-GalDH). The AuNS-PVP-GalDH assay remains turquoise blue in the absence of galactose and NADH; however, as galactose and NADH concentrations grow, the reaction well color changes to a characteristic red color in the presence of an alkaline environment and a metal ion catalyst (detection solution). As a result, when galactose is sensed in the presence of H₂O₂, the colored response of the AuNS-PVP-GalDH assay transforms from turquoise blue to light pink, and then to wine red in a concentration-dependent manner discernible to the human eye. This competitive AuNS-PVP-GalDH assay could be a viable analytical tool for rapid and convenient galactose quantification in resource-limited areas. Full article