Search Results (540)

With the popularization of electric vehicles and the continuous expansion of the electric vehicle market, the construction and management of charging facilities for electric vehicles have become important issues in research and practice. In some remote areas, the charging stations are idle due to low traffic flow, resulting in a waste of resources. Areas with high traffic flow may have fewer charging stations, resulting in long queues and road congestion. The purpose of this study is to optimize the location of charging stations and the number of charging piles in the stations based on the distribution of traffic flow, and to construct a bi-level programming model by analyzing the distribution of traffic flow. The upper-level planning model is the user-balanced flow allocation model, which is solved to obtain the optimal traffic flow allocation of the road network, and the output of the upper-level planning model is used as the input of the lower-layer model. The lower-level planning model is a generalized minimum cost model with driving time, charging waiting time, charging time, and the cost of electricity consumed to reach the destination of the trip as objective functions. In this study, an empirical simulation is conducted on the road network of Hefei City, Anhui Province, utilizing three algorithms—GA, GWO, and PSO—for optimization and sensitivity analysis. The optimized results are compared with the existing charging station deployment scheme in the road network to demonstrate the effectiveness of the proposed methodology. Full article

Rapid industrialization and urbanization have progressed in Korea, yet public attention to hazardous pollutants emitted from industrial complexes remains limited. With the increasing coexistence of industrial and residential areas, there is a growing need for real-time monitoring and management plans that account for the rapid dispersion of hazardous air pollutants (HAPs). In this study, we conducted spatiotemporal data collection and analysis for the first time in Korea using real-time measurements obtained through mobile extractive differential optical absorption spectroscopy (Me-DOAS) mounted on a solar occultation flux (SOF) vehicle. The measurements were conducted in the Saha Sinpyeong–Janglim Industrial Complex in Busan, which comprises the Sasang Industrial Complex and the Sinpyeong–Janglim Industrial Complex. BTEX compounds were selected as target volatile organic compounds (VOCs), and real-time measurements of both BTEX and fine particulate matter (PM) were conducted simultaneously. Correlation analysis revealed a strong relationship between PM₁₀ and PM_2.5 (r = 0.848–0.894), indicating shared sources. In Sasang, BTEX levels were associated with traffic and localized facilities, while in Saha Sinpyeong–Janglim, the concentrations were more influenced by industrial zoning and wind patterns. Notably, inter-compound correlations such as benzene–m-xylene and p-xylene–toluene suggested possible co-emission sources. This study proposes a GIS-based, three-dimensional air quality management approach that integrates variables such as traffic volume, wind direction, and speed through real-time measurements. The findings are expected to inform effective pollution control strategies and future environmental management plans for industrial complexes. Full article

A particularly important activity carried out by railway infrastructure managers to maintain railway devices in full working order is the diagnostic process. It increases the level of railway safety. The diagnostic process involves collecting information about the equipment through inspections, tests, functional trials, parameter measurements, and analysis of the working environment, followed by comparing the obtained information with the required parameters or permissible conditions. This activity also enables the formulation of a technical diagnosis regarding the current ability of the devices to perform its intended functions, taking into account the impact of its technical condition on railway traffic safety. This is especially important in the case of railway traffic control devices, as these devices are largely responsible for ensuring railway traffic safety. The collection of data on the condition of railway traffic control devices in the form of Big Data sets and diagnostic inference is an effective factor in making operational decisions for such devices. It enables the acquisition of complete information about the actual course of the exploitation process and allows for obtaining reliable information necessary to manage this process, particularly in the areas of diagnostics forecasting of devices conditions, renewal, and organization of maintenance and repair facilities. To support this, a service data acquisition and analysis system for railway traffic control devices (SADEK) was developed. This system can serve as a software platform for maintenance needs in the railway sector. Full article

According to the World Health Organization (WHO), indoor air quality (IAQ) is becoming a serious global concern due to its significant impact on human health. However, not all relevant health parameters are currently regulated. For example, particle number concentration (PNC) and its associated carbonaceous species, such as black carbon (BC), which are classified as carcinogenic by the International Agency for Research on Cancer (IARC), are not currently regulated. Compared with IAQ studies in other types of buildings, studies focusing on IAQ in hospitals or other healthcare facilities are scarce. Therefore, this study aims to evaluate the impact of these outdoor pollutants, among others, on the indoor environment of a hospital under different atmospheric conditions. To identify the seasonal influence, two different periods of two consecutive seasons (summer 2020 and winter 2021) were selected for the measurements. Regulated pollutants (NO, NO₂, O₃, PM₁₀, and PM_2.5) and nonregulated pollutants (PM₁, PNC, and equivalent BC (eBC)) in outdoor air were simultaneously measured indoor and outdoor. This study also investigated the impact of indoor activities on indoor air quality. In the absence of indoor activities, outdoor sources significantly contribute to indoor traffic-related pollutants. Indoor and outdoor (I-O) measurements showed similar behavior, but indoor concentrations were lower, with peak levels delayed by up to two hours. Seasonal variations in indoor/outdoor ($\mathrm{I}/\mathrm{O}$) ratios were lower for particles than for associated gaseous pollutants. Particle infiltration depended on particle size, with it being higher the smaller the particle size. Indoor activities also significantly affected indoor pollutants. PM_x (especially PM₁₀ and PM_2.5) concentrations were mainly modulated by walking-induced particle resuspension. Vertical eBC profiles indicated a relatively well-mixed environment. Ventilation through open windows rapidly altered indoor air quality. Outdoor-dominant pollutants (PNC, eBC, and NO_X) had $\mathrm{I}/\mathrm{O}$ ratios ≥ 1. Staying in the room with an open window had a synergistic effect, increasing the $\mathrm{I}/\mathrm{O}$ ratios for all pollutants. Higher I/O ratios were associated with turbulent outdoor conditions in both unoccupied and occupied conditions. Statistically significant differences were observed between stable (TKE ≤ 1 m² s⁻²) and unstable (TKE > 1 m² s⁻²) conditions, except for NO₂ in summer. This finding was particularly significant when the wind direction was westerly or easterly during unstable conditions. The results of this study highlight the importance of understanding the behavior of indoor particulate matter and related pollutants. These pollutants are highly variable, and knowledge about them is crucial for determining their health effects, particularly in public buildings such as hospitals, where information on IAQ is often limited. More measurement data is particularly important for further research into I-O transport mechanisms, which are essential for developing preventive measures and improving IAQ. Full article

This study identifies the optimal location for an offshore energy island to supply sustainable power to desalination plants along the Red Sea coast. As demand for clean energy in water production grows, integrating renewables into desalination systems becomes increasingly essential. A decision-making framework was developed to assess site feasibility based on renewable energy potential (solar, wind, and wave), marine traffic, site suitability, planned developments, and proximity to desalination facilities. Data was sourced from platforms such as Windguru and RETScreen, and spatial analysis was conducted using Inverse Distance Weighting (IDW) and Multi-Criteria Decision Analysis (MCDA). Results indicate that the central Red Sea region offers the most favorable conditions, combining high renewable resource availability with existing infrastructure. The estimated regional desalination energy demand of 2.1 million kW can be met using available renewable sources. Integrating these sources is expected to reduce local CO₂ emissions by up to 43.17% and global desalination-related emissions by 9.5%. Spatial constraints for offshore installations were also identified, with land-based solar energy proposed as a complementary solution. The study underscores the need for further research into wave energy potential in the Red Sea, due to limited real-time data and the absence of a dedicated wave energy atlas. Full article

Rapid urbanization and climate change pose significant challenges to air quality in arid metropolitan areas, with critical implications for public health and sustainable development. This study projects the evolution of air pollution in Riyadh, Saudi Arabia, through 2070 using an integrated modeling approach that combines CMIP6 climate projections with localized air quality data. We analyzed daily concentrations of major pollutants (SO₂, NO₂) across 15 strategically selected monitoring stations representing diverse urban environments, including traffic corridors, residential areas, healthcare facilities, and semi-natural zones. Climate data from two Earth System Models (CNRM-ESM2-1 and MPI-ESM1.2) were bias-corrected and integrated with historical pollution measurements (2000–2015) using hierarchical Bayesian statistical modeling under SSP2-4.5 and SSP5-8.5 emission scenarios. Our results revealed substantial deterioration in air quality, with projected increases of 80–130% for SO₂ and 45–55% for NO₂ concentrations by 2070 under high-emission scenarios. Spatial analysis demonstrated pronounced pollution gradients, with traffic corridors (Eastern Ring Road, Northern Ring Road, Southern Ring Road) and densely urbanized areas (King Fahad Road, Makkah Road) experiencing the most severe increases, exceeding WHO guidelines by factors of 2–3. Even semi-natural areas showed significant increases in pollution due to regional transport effects. The hierarchical Bayesian framework effectively quantified uncertainties while revealing consistent degradation trends across both climate models, with the MPI-ESM1.2 model showing a greater sensitivity to anthropogenic forcing. Future concentrations are projected to reach up to 70 μg m⁻³ for SO₂ and exceed 100 μg m⁻³ for NO₂ in heavily trafficked areas by 2070, representing 2–3 times the Traffic corridors showed concentration increases of 21–24% compared to historical baselines, with some stations (R5, R13, and R14) recording projected levels above 4.0 ppb for SO₂ under the SSP5-8.5 scenario. These findings highlight the urgent need for comprehensive emission reduction strategies, accelerated renewable energy transition, and reformed urban planning approaches in rapidly developing arid cities. Full article

Nowadays, a pedestrian navigation system using a smartphone has become popular as a useful tool to reach an unknown destination. When the destination is the office of a person, a detailed map information is necessary on the target area such as the room number and location inside the building. The information can be collected from various sources including Google maps, websites for the building, and images of signs. In this paper, we propose a map information collection tool for a pedestrian navigation system. To improve the accuracy and completeness of information, it works with the four steps: (1) a user captures building and room images manually, (2) an OCR software using Google ML Kit v2 processes them to extract the sign information from images, (3) web scraping using Scrapy (v2.11.0) and crawling with Apache Nutch (v1.19) software collects additional details such as room numbers, facilities, and occupants from relevant websites, and (4) the collected data is stored in the database to be integrated with a pedestrian navigation system. For evaluations of the proposed tool, the map information was collected for 10 buildings at Okayama University, Japan, a representative environment combining complex indoor layouts (e.g., interconnected corridors, multi-floor facilities) and high pedestrian traffic, which are critical for testing real-world navigation challenges. The collected data is assessed in completeness and effectiveness. A university campus was selected as it presents a complex indoor and outdoor environment that can be ideal for testing pedestrian navigations in real-world scenarios. With the obtained map information, 10 users used the navigation system to successfully reach destinations. The System Usability Scale (SUS) results through a questionnaire confirms the high usability. Full article

Indoor environmental quality (IEQ) of higher education (HE) buildings significantly impacts the built environment sector. This research aimed to optimize learning environments and enhance student comfort, especially post-COVID-19. The study adopts the principles of Post-occupancy Evaluation (POE) to collect and analyze various quantitative and qualitative data through environmental data monitoring, a user perceptions survey, and semi-structured interviews with professionals. Although the environmental conditions generally met existing standards, the findings indicated opportunities for further improvements to better support university communities’ comfort and health. A significant challenge identified by this research is the inability of the facility management to physically manage and operate the vast and complex spaces within HE buildings with contemporary IEQ standards. In response to these findings, this research developed a BIM-based prototype for the real-time monitoring and automated control of IEQ. The prototype integrates a BIM model with Arduino-linked sensors, motors, and traffic lights, with the latter visually indicating IEQ status, while motors automatically adjust environmental conditions based on sensor inputs. The outcomes of this study not only contribute to the ongoing discourse on sustainable building management, especially post-pandemic, but also demonstrate an advancement in the application of BIM technologies to improve IEQ and by extension, occupant wellbeing in HE buildings. Full article

The subway is crucial for urban operations, especially during holidays. Unlike traditional studies using smart card data, this research analyzes National Day holiday subway travel patterns with Hangzhou’s 2021 mobile payment data, covering 42 days from 6 September to 17 October for comprehensive comparison. Considering spatial passenger flow correlations, a Composite Weight (CW) matrix integrating network distance and time is defined and integrated into a Spatial Error Model (SEM), Spatial autoregressive model (SAR), and Spatial Durbin Model (SDM) to create CW-SEM, CW-SAR, and CW-SDM. The CW matrix innovatively considers network distance and time, overcoming traditional spatial weight matrix limitations to accurately and dynamically capture passenger flow spatial correlations. The results show the following: (1) Hangzhou saw 37% and 49% increases in average daily passenger flow during the extended holiday versus workdays and weekends, with holiday peak hour flow declining 16% compared to workdays but increasing 18% versus weekends, likely due to shifted travel purposes from commuting to tourism; (2) strong spatial passenger flow correlations existed in both workdays and weekends, attributed to urban functional zoning and transport network connectivity; (3) key factors such as population, social media activity, commercial facilities and transportation hubs show significant positive correlations with holiday passenger flow. Medical facility reveals significant negative correlations with holiday passenger flow. These findings highlight the need to incorporate spatial variations into major holiday subway travel studies for urban planning and traffic management insights. Full article

Pavement markings, as a crucial component of traffic guidance and safety facilities, are subject to degradation and abrasion after a period of service. To ensure traffic safety, retroreflectivity and diffuse illumination should be above the minimum thresholds and required to undergo inspection periodically. Therefore, an onboard light detection and ranging (LiDAR) and camera deployment optimization method is proposed for pavement marking distress detection to adapt to complex traffic conditions, such as shadows and changing light. First, LiDAR and camera sensors’ detection capability was assessed based on the sensors’ built-in features. Then, the LiDAR–camera deployment problem was mathematically formulated for pavement marking distress fusion detection. Finally, an improved red fox optimization (RFO) algorithm was developed to solve the deployment optimization problem by incorporating a multi-dimensional trap mechanism and an improved prey position update strategy. The experimental results illustrate that the proposed method achieves 5217 LiDAR points, which fall on a 0.58 m pavement marking per data frame for distress fusion detection, with a relative error of less than 7% between the mathematical calculation and the field test measurements. This empirical accuracy underscores the proposed method’s robustness in real-world scenarios, effectively mitigating the challenges posed by environmental interference. Full article

Children’s outdoor physical activity (PA) serves as a crucial mechanism for health development, but its safety is affected by urban space design and management. However, most existing studies focus on isolated risk factors or singular spatial typologies, which lack a comprehensive safety assessment framework. This study aims to construct a safety assessment system for children’s outdoor public activity spaces and explore safety optimization strategies. This study employs a mixed methods approach to systematically analyze 13 outdoor public activity spaces across Shanghai, utilizing NVivo 12 Plus for qualitative coding of the data. Based on the coding results, a questionnaire survey targeting parents of children under 12 years old (with a balanced gender ratio) was designed and administered, yielding 509 valid responses. A 32-indicator assessment system was finally constructed via principal component analysis (PCA). The assessment system encompasses seven dimensions: site facilities (24.0%), spatial conditions (16.1%), site management (13.5%), material conditions (13.0%), service facilities (12.8%), traffic and landscape (10.3%), and ground conditions (10.3%). This study provides a quantitative safety assessment instrument for designing child-friendly urban public activity spaces, which has important implications for improving the public health service system and promoting the construction of healthy cities in the Sustainable Development Goals. Full article

Road crashes impose significant societal costs, and while links between static land use and safety are established, the long-term impacts of dynamic land use conversions remain under-explored. This study addresses this gap by investigating and quantifying how specific land use transitions over a decade influence subsequent road crash frequency in Metropolitan Melbourne. Our objective was to understand which conversion pathways pose the greatest risks or offer safety benefits, informing urban planning and policy. Utilizing extensive observational data covering numerous land use conversions, we employed Negative Binomial models (selected as the best fit over Poisson and quasi-Poisson alternatives) to analyze the association between various transition types and crash occurrences in surrounding areas. The analysis revealed distinct and statistically significant safety outcomes. Major findings indicate that transitions introducing intensified activity and vulnerable road users, such as converting agricultural land or parks to educational facilities (e.g., Agri → Edu, coefficient ≈ +0.10; Park → Edu, ≈+0.12), or intensifying land use in previously less active zones (e.g., Park → Com, ≈+0.07; Trans → Park, ≈+0.10), significantly elevate long-term crash risk, particularly when infrastructure is inadequate. Conversely, conversions creating low-traffic, nature-focused environments (e.g., Water → Park, ≈–0.16) or channeling activity onto well-suited infrastructure (e.g., Trans → Com, ≈–0.12) demonstrated substantial reductions in crash frequency. The critical role of context-specific infrastructure adaptation, highlighted by increased risks in some park conversions (e.g., Com → Park, ≈+0.06), emerged as a key mediator of safety outcomes. These findings underscore the necessity of integrating dynamic, long-term road safety considerations into land use planning, mandating appropriate infrastructure redesign during conversions, and prioritizing interventions for identified high-risk transition scenarios to foster safer and more sustainable urban development. Full article

As cities globally prioritize sustainable transportation, understanding gender-differentiated responses to the urban built environment is critical for equitable mobility planning. This study combined the Social Ecological Model (SEM) with the theoretical perspective of Gendered Spatial Experience to explore the differentiated impacts of the Perceived Street Built Environment (PSBE) on the cycling behavior of men and women. Questionnaire data from 285 e-bike and traditional bicycle riders (236 e-bike riders and 49 traditional cyclists, 138 males and 147 females) from Gulou District, Nanjing, between May and October 2023, were used to investigate gender differences in cycling behavior and PSBE using the Mann–Whitney U-test and crossover analysis. Linear regression and logistic regression analyses examined the PSBE impact on gender differences in cycling probability and route choice. The cycling frequency of women was significantly higher than that of men, and their cycling behavior was obviously driven by family responsibilities. Greater gender differences were observed in the PSBE among e-bike riders. Women rated facility accessibility, road accessibility, sense of safety, and spatial comfort significantly lower than men. Clear traffic signals and zebra crossings positively influenced women’s cycling probability. Women were more sensitive to the width of bicycle lanes and street noise, while men’s detours were mainly driven by the convenience of bus connections. We recommend constructing a gender-inclusive cycling environment through intersection optimization, family-friendly routes, lane widening, and noise reduction. This study advances urban science by identifying gendered barriers in cycling infrastructure, providing actionable strategies for equitable transport planning and urban design. Full article

Background: Over the past decade, Shanghai primary and middle schools have installed and updated direct-drinking water facilities in compliance with local policies, but few studies have assessed the schools providing direct-drinking water access. Methods: A cross-sectional study was conducted with 167 public primary, middle, and high schools across Pudong New Area, Shanghai during Autumn 2024. The type, location, and working condition of all direct-drinking water facilities throughout each school were documented by trained research staff using a direct observation protocol. Information on school direct-drinking water quality was obtained from the routine monitoring program. Data were analyzed for comprehensive assessment of direct-drinking water facilities in the schools. Results: On average, each school had one faucet of direct-water facility per 41 students; 70% of the schools met the requirement for minimum direct-drinking water access, and >90% placed facilities in high-traffic areas. In addition, 83% of the schools selected water facilities with nanofiltration and a hot water system, and most only provided hot water (above 50 degrees Celsius). For school direct-drinking water quality, the concentrations of hardness, chemical oxygen demand (COD), and total dissolved solids (TDS), as well as pH values, were improved significantly, but the total bacteria count was prone to not meeting the requirement for standards in middle and high schools, which could be caused by insufficiency of chlorination in pumping stations or neglecting to clean facilities promptly. Conclusions: Wide usage of school direct-drinking water facilities could help most public schools to meet local policies for minimum student drinking water access in Shanghai, but microbial contamination was the potential threat. Water temperature is the key factor affecting students’ drinking water, providing an optional water temperature for students’ preferences and concerns. National sanitary standards of direct-drinking water quality and relevant additional regulations should be established and implemented in China. Full article

Accurate evaluation of the prevailing traffic operations plays an important part in developing sustainable transport systems. This research examines the suitability of the level of service (LOS) criteria developed by the Indian and United States (US) Highway Capacity Manuals (HCM) for heterogeneous and undisciplined traffic streams and proposes new criteria using a data-driven approach. Traffic data were collected from a selected major arterial in Karachi, and fundamental diagrams were developed using these data. These fundamental diagrams and field-collected data were analyzed using the K-mean clustering approach to examine the actual traffic states at various LOS bands used in practice. Associating the field-measured volume-to-capacity ratio with the speed bands used for LOS analysis gives insights into actual traffic conditions at various LOS categories. The research shows that the volume-to-capacity ratio corresponding to the speed range for LOS A is about 0.45, which implies that the heterogeneous traffic moves with comparatively higher speeds despite an increase in traffic volume. The criteria for LOS were developed using the K-mean cluster analysis technique. The proposed values of LOS criteria for speed percentages are significantly higher than those reported in both the HCMs. This research highlights the need to develop separate LOS criteria for heterogeneous and undisciplined traffic for all transportation facilities. The development of such new criteria can provide researchers and engineers with a schematic for the effective and realistic evaluation of local traffic regimes. Full article