Search Results (89)

Femtosecond laser writing (FLW) enables mask-free three-dimensional photonic integration in transparent materials and offers a flexible route for prototyping glass-based photonic circuits. Here, we present a monolithic fabrication approach that combines femtosecond laser waveguide writing, femtosecond laser-induced chemical etching (FLICE), laser ablation, and metallization to realize reconfigurable photonic circuits in borosilicate glass. The process is implemented in a CAD-to-device workflow that allows optical, mechanical, and electrical structures to be co-designed and fabricated within the same substrate. A stress-assisted waveguide-writing regime is developed in borosilicate glass, enabling single-scan fabrication of optical waveguides, directional couplers, and Mach–Zehnder interferometers at writing speeds of 30 mm/s. The fabricated devices demonstrate stable guiding, directional coupling, and interferometric operation, providing a practical basis for implementing reconfigurable photonic building blocks in this material platform. FLICE is then used to fabricate suspended glass microbridges incorporating femtosecond-laser-written waveguides and integrated resistive microheaters. These structures act as thermally isolated thermo-optic phase shifters and enable a full 2π phase shift with an electrical power consumption of approximately 17 mW. The results demonstrate the feasibility of combining FLW and FLICE within a single borosilicate glass substrate to monolithically integrate passive photonic circuits with actively tunable thermo-optic phase shifters. This work establishes a laser-based fabrication route for reconfigurable three-dimensional photonic circuits in glass and provides a basis for future optimization toward larger programmable photonic systems. Full article

The accurate detection and quantification of electromagnetic radiation in the infrared (IR) and terahertz (THz) regions are critical for modern applications, yet they remain challenging due to the “THz gap” and the limitations of current room-temperature technologies. This paper proposes a novel uncooled IR–THz power sensor based on a hybrid graphene oxide (GO) and polydimethylsiloxane (PDMS) bilayer integrated into a surface plasmon resonance (SPR) architecture in the Kretschmann configuration. The device exploits the broadband optical absorption of GO to efficiently convert incident radiation into heat, while the high thermo-optic coefficient of the PDMS layer translates these thermal variations into measurable refractive index shifts. Finite Element Method (FEM) modeling was employed to optimize the sensor design, predicting a linear angular shift of 0.093 deg/mW. Experimental results confirm the theoretical expectations, demonstrating a high sensitivity of 0.083 deg/mW and an exceptionally low limit of detection and resolution on the order of 15 nW. By eliminating the need for cryogenic cooling or vacuum packaging, this platform offers a compact, low-cost, and high-performance solution for next-generation IR–THz metrology. Full article

Traditional tunable Bragg waveguide grating filters, which rely on thermo-optic or carrier effects, often face limitations such as high energy consumption, low tuning efficiency, and difficulty in achieving independent multi-parameter control. To overcome these bottlenecks, this work proposes a novel optical waveguide filter based on the heterogeneous integration of silicon nitride and the phase-change material Sb₂Se₃. The device leverages the substantial refractive index contrast between crystalline and amorphous states of Sb₂Se₃ to construct a programmable Bragg grating within the thin film layer. This is realized through laser-induced phase transition method, enabling nonvolatile manipulation of the light field. Simulation results indicate that the independent tuning of central wavelength over 19.2 nm range was achieved by adjusting the grating width and ripple width simultaneously. Likewise, the extinction ratio could be independently controlled over 22.3 dB through coordinated adjustments of the grating length and position shift. Beyond its tuning capabilities, the proposed device theoretically exhibits exceptional performance characteristics, including an ultra-low insertion loss of 0.1 dB and strong side lobe suppression. These advantages highlight the potential of this approach to provide a low energy consumption, multifunctional solution for integrated photonic devices, offering a promising pathway for the next generation of programmable photonic integrated circuits. Full article

Lithium niobate on insulator (LNOI) has emerged as a promising platform for compact, low-loss phase modulators. The extant LNOI studies evaluate device performance almost exclusively through the Pockels effect, treating piezoelectric–photoelastic strain and thermo-optic drift as decoupled channels. Crucially, both mechanisms directly perturb the phase bias of a fiber-optic gyroscope (FOG), rendering them indispensable in sensing-oriented design. This work establishes a unified multiphysics model of an X-cut TFLN ridge phase modulator that self-consistently couples the electro-optic, piezoelectric–photoelastic, thermo-optic, and pyroelectric channels. The contributions of the four mechanisms are quantitatively decomposed under realistic FOG operating conditions, and the slab thickness, ridge-top width, and electrode gap are systematically optimized to balance modulation efficiency against environmental robustness. The co-optimization of the ridge geometry and electrode gap design maintains the EO overlap factor near 0.55, while reducing the half-wave voltage requirement. This results in a half-wave voltage length of V_πL = 1.65 V·cm at a 4.4 μm electrode gap. The optimized geometry and electrode gap (4.4 μm) are essentially temperature-independent: extracted from the Pockels modulation slope, V_πL remains stable at ≈1.65 V·cm (push–pull single-pass; within ~0.3%) across 25~85 °C. Furthermore, an externally imposed substrate temperature rise of 60 K (the upper end of the 25~85 °C FOG operating range) induces a mode-field-weighted thermal residual corresponding to approximately 27% of the Pockels modulation depth at an applied voltage of 5 V. The present study demonstrates that the DC-coupled operation of TFLN sensor-grade modulators is viable across the full FOG temperature range, without dedicated active temperature stabilization, and the residual thermal-bias offset is absorbed by the FOG’s standard closed-loop servo electronics. The results of the study provide quantitative design guidelines for high-performance, environmentally stable TFLN phase modulators in compact FOG systems. Full article

In this study, we present a thermal-aware design of a compact hybrid plasmonic grating (HPG) TE-pass polarizer on X-cut lithium niobate on insulator (LNOI) for fiber-optic gyroscopes (FOGs). In a three-dimensional simulation, the optimization of the trapezoidal sidewall angle (θ = 78°) and the thickness of the Ag grating (13 nm) yield a polarization extinction ratio of 36.2 dB at 1550 nm (with a peak of 41.4 dB at 1548 nm) within a sub-10 μm grating length. This represents a ~3–8 dB improvement over prior LNOI HPG polarizers at the same footprint. A multiphysics thermo-optic analysis over the wide industrial FOG envelope (from −45 to +85 °C) demonstrates that the operating-wavelength polarization extinction ratio remains within the range of 24.7–36.2 dB across the entire 130 K span (worst case 24.7 dB at −25 °C), constrained solely by a modest 10 pm/K Bragg detuning stemming from the pronounced (~5) thermo-optic anisotropy of LN. The insertion loss exhibits a negligible drift of merely 0.73 dB. A fabrication tolerance study identified the Ag thickness as the predominant budgetary constraint (±1 nm tolerance, PER dropping ~10 dB at the resonance edge), while the ridge width and oxide buffer demonstrated comparatively greater flexibility. The device, therefore, fulfills the criteria for FOG-grade polarization suppression across most of the operational temperature range. The −25 °C point is established at the 25 dB threshold, thereby providing concrete design guidelines for ensuring environmentally stable on-chip polarization control on LNOI. Full article

The thermal drift of microring resonators is one of the key obstacles hindering their practical applications. Employing polymers with negative thermo-optic coefficients to compensate for temperature-induced wavelength shifts represents a common solution. This study utilizes polymethyl methacrylate (PMMA) to counter this effect in silicon nitride microring resonators, achieving thermal drift magnitudes below 2.0 ± 0.1 pm/K within the temperature range of 15 °C to 70 °C. Furthermore, nonlinear thermal drift characteristics were experimentally observed, and simulations revealed that these nonlinearities primarily originate from the temperature-dependent Young’s modulus and Poisson’s ratio of PMMA. This research provides design references for waveguide compensation using negative thermo-optic coefficient materials and proposes a conceptual framework for dual-function devices capable of both athermal operation and thermal tuning. Full article

We investigated the influence of transition metal coordination on the optical dispersion and thermo-optic behavior of the ionic liquid 1-butyl-3-methylimidazolium thiocyanate ([BMIM][SCN]). Refractive index measurements in the visible–near-infrared range (400–1000 nm), combined with temperature-dependent characterization (298–323 K), demonstrate that coordination with Al³⁺, Cd²⁺, Zn²⁺, and Mn²⁺ consistently increases the refractive index relative to the neat ionic liquid. All systems exhibit normal dispersion, following the hierarchy n(Al) > n(Cd) ≳ n(Zn) > n(Mn) > n([BMIM][SCN]), which reflects cooperative contributions from metal-centerd polarizability and coordination-induced modifications to density and electronic structure. Negative thermo-optic coefficients are measured for all samples, with [BMIM]₃[Al(SCN)₆] displaying the highest temperature sensitivity. Abbe diagrams and group-velocity dispersion analyses confirm a predictable index–dispersion trade-off and show that dispersion-related transport parameters are less temperature dependent than n(T). Collectively, these findings establish a structure–property framework for tuning refractive index, chromatic dispersion, and thermo-optic response via coordination chemistry, supporting the targeted design of thiocyanate-based ionic liquids for photonic components, thermal lenses, and dispersion-managed optical devices. Full article

Photo-thermo-refractive (PTR) glass is a key material for optical devices, yet the synergistic mechanism between its raw material precursors remains unclear. This study systematically investigates the individual and combined effects of silver precursors (Ag₂O and AgNO₃) and sodium salts (Na₂CO₃ and NaNO₃) on the structural evolution and crystallization behavior of Si-Na-Al-Zn-based PTR glasses. Through a combination of spectroscopic (UV-Vis, FTIR, Raman), thermal (DSC), and microscopic (SEM) characterizations, we demonstrate that the precursor combination profoundly influences the glass network homogeneity, ion mobility, and phase separation behavior. The results reveal that the AgNO₃ and NaNO₃ combination fosters a highly homogeneous and thermally stable network, facilitating the formation of a uniform distribution of silver nanoparticles and, subsequently, a dense nanoscale precipitation of NaF crystals. This work elucidates the critical synergistic mechanism between precursors, providing a fundamental basis for the precise composition design of high-performance PTR glasses for advanced optical applications. Full article

High-quality spectral filters with versatile tuning mechanisms are essential for applications in photonic integrated circuits, including sensing, laser stabilization, and spectral signal processing. We report the implementation of thermo-optic (TO) and electro-optic (EO) spectral tuning in silicon nitride Mach–Zehnder interferometers (MZIs) and micro-ring resonators (MRRs) by functionalizing the devices with a PMMA:JRD1 polymer cladding and integrating titanium tracks as heaters and electrodes. The fabricated MZIs and MRRs exhibit narrow linewidths of 25–30 pm and achieved TO tuning efficiencies of 1.7 and 13 pm/mW and EO tuning efficiencies of 0.33 and 1.6 pm/V, respectively. Closed-loop regulation using TO and EO effects enables stable half-fringe locking under environmental perturbations. This simple, broadly compatible hybrid platform demonstrates a practical approach to dual-mode spectral tuning and modulation in integrated photonic filters, providing a flexible route toward compact, reconfigurable, and environmentally robust photonic circuits. Full article

Silica-based splitters, couplers, and arrayed waveguide gratings are key components in optical communication. However, the high tuning power consumption of silica chips limits their development and application in fields such as Reconfigurable Optical Add/Drop Multiplexers and Mode Division Multiplexing. In this work, we demonstrate a silica thermo-optic switch based on polymer cladding within a Mach–Zehnder Interferometer framework, in which a UV-curable polymer is employed as the upper cladding to enhance thermal efficiency. The device exhibits a power consumption of 48 mW, rise and fall response times were 215 µs and 271 µs, compared to all-silicon switches, the power consumption is reduced by 75%, and the switching speed is improved by nearly a factor of two, while maintaining a comparable insertion loss. Experimental results demonstrate an insertion loss of 8.53 dB and an extinction ratio of 10.12 dB. Full article

In order to solve the problem of the efficiency reduction and complex manufacturing of traditional grating couplers under environmental temperature fluctuations, a Si₃N₄ high-efficiency grating coupler integrating a distributed Bragg reflector (DBR) and thermo-optical tuning layer is proposed. In this paper, the double-layer DBR is used to make the down-scattered light interfere with other light and reflect it back into the waveguide. The finite difference time domain (FDTD) method is used to simulate and optimize the key parameters such as grating period, duty cycle, incident angle and cladding thickness, achieving a coupling efficiency of −1.59 dB and a 3 dB bandwidth of 106 nm. In order to further enhance the temperature stability, the amorphous silicon (a-Si) thermo-optical material layer and titanium metal serpentine heater are embedded in the DBR. The reduction in coupling efficiency caused by fluctuations in environmental temperature is compensated via local temperature control. The simulation results show that within the wide temperature range from −55 °C to 150 °C, the compensated coupling efficiency fluctuation is less than 0.02 dB, and the center wavelength undergoes a blue shift. This design is compatible with complementary metal-oxide-semiconductor (CMOS) processes, which not only simplifies the fabrication process but also significantly improves device stability over a wide temperature range. This provides a feasible and efficient coupling solution for photonic integrated chips in non-temperature-controlled environments, such as optical communications, data centers, and automotive systems. Full article

The development of reconfigurable photonic integrated circuits (PICs) demands photonic devices with high-efficiency tuning capabilities, yet conventional thermo-optic and electro-optic methods suffer from limited index modulation and excessive power consumption. To overcome these limitations, we propose an etchless and tunable silicon nitride waveguide mode converter based on low-loss phase change material, antimony triselenide (Sb₂Se₃). By depositing an Sb₂Se₃ layer on the silicon nitride wafer and using a laser-induced phase transition technique, we can write and erase the waveguide structure in the phase change wafer without waveguide etching, where the input/output waveguide is a strip waveguide and the conversion region is built using a tilted subwavelength grating structure. From the results, the obtained TE₀-TE₁ mode conversion efficiency, crosstalk, and insertion loss are higher than 96%, lower than −16 dB, and lower than 0.4 dB at a wavelength of 1.55 µm, respectively. The proposed device enables post-fabrication tuning of the grating duty cycle, allowing working wavelength adjustment for the same device. Furthermore, the device exhibits scalability to other higher-order mode conversions (e.g., TE₀-TE₂). Consequently, we expect that such devices could have important uses in programmable and multifunctional PICs. Full article

The growing demand for communication capacity has driven advancements in optical switches. However, measurement procedures for large-scale switching arrays become more complex as the number of units increases. Multi-port optical switches can reduce the measurement complexity. In this work, we demonstrate a 1 × 4 thermo-optic switch fabricated on a silica platform, based on a Generalized Mach–Zehnder Interferometer (GMZI) structure with a wide bandwidth and low crosstalk. The device enables flexible switching among four output channels, achieving a crosstalk below −15 dB over the 1500–1580 nm wavelength range and an insertion loss of −6.51 dB at 1550 nm. Full article

Tunable photonic devices are increasingly pivotal in modern optical systems, enabling the dynamic control over light propagation, modulation, and filtering. This review systematically explores two prominent classes of materials, thermo-optic and electro-optic, for their roles in such tunable devices. Thermo-optic materials utilize refractive index changes induced by temperature variations, offering simple implementation and broad material compatibility, although often at the cost of slower response times. In contrast, electro-optic materials, particularly those exhibiting the Pockels and Kerr effects, enable rapid and precise refractive index modulation under electric fields, making them suitable for high-speed applications. The paper discusses the underlying physical mechanisms, material properties, and typical figures of merit for each category, alongside recent advancements in organic, polymeric, and inorganic systems. Furthermore, integrated photonic platforms and emerging hybrid material systems are highlighted for their potential to enhance performance and scalability. By evaluating the tradeoffs in speed, power consumption, and integration complexity, this review identifies key trends and future directions for deploying thermo-optic and electro-optic materials in the next generation tunable photonic devices. Full article

Photonic integrated circuits (PICs) are crucial for advanced applications in telecommunications, quantum computing, and biomedical fields. Silicon nitride (SiN)-based platforms are promising for PICs due to their transparency, low optical loss, and thermal stability. However, achieving efficient thermo-optic (TO) modulation on SiN remains challenging due to limited reconfigurability and high power requirements. This study aims to optimize TO phase shifters on SiN platforms to enhance power efficiency, reduce device footprint, and minimize insertion losses. We introduce a CMOS-compatible plasmo-photonic TO phase shifter using a SiOC material layer with a high TO coefficient combined with aluminum heaters on a SiN platform. We evaluate four interferometer architectures—symmetric and asymmetric Mach–Zehnder Interferometers (MZIs), an MZI with a ring resonator, and a single-arm design—through opto-thermal simulations to refine performance across power, losses, footprint, and switching speed metrics. The asymmetric MZI with ring resonator (A-MZI-RR) architecture demonstrated superior performance, with minimal power consumption (1.6 mW), low insertion loss (2.8 dB), and reduced length (14.4 μm), showing a favorable figure of merit compared to existing solutions. The optimized SiN-based TO switches show enhanced efficiency and compactness, supporting their potential for scalable, energy-efficient PICs suited to high-performance photonic applications. Full article