Search Results (47)

Thermally compressed fast-growing wood exhibits superior mechanical properties, presenting a sustainable and cost-effective alternative to solid wood. However, to prevent structural damage and achieve higher densification during this process, effective pretreatment is essential. This study systematically evaluates the efficacy of hydrothermal and alkaline sulfite pretreatments in modifying Chinese fir (Cunninghamia lanceolata Hook.) and poplar (Populus tomentosa Carr.). The resulting compressed wood was comprehensively characterized in terms of mass loss, mechanical strength, microstructure, chemical composition, and cellulose crystallinity. Results indicate that, under the conditions tested, alkaline sulfite pretreatment was more effective than hydrothermal pretreatment in enhancing the material properties of densified wood, with peak density, compressive strength, and hardness achieved after 5 h for fir and 3 h for poplar, respectively. The results obtained under the present experimental conditions support the fact that alkaline sulfite pretreatment is an effective approach for producing densified wood with enhanced mechanical properties, suggesting its potential suitability for higher-value applications. Full article

The design of sustainable hydrogel materials with tunable mechanical and thermal properties is essential for emerging applications in flexible and wearable electronics. In this study, hydrogels based on natural gums such as Guar, Tara, and Xanthan and their composites with Cellulose Citrate were developed through a mild physical crosslinking process, ensuring environmental compatibility and structural integrity. The effect of cellulose citrate pretreatment under different alkaline conditions (0.04%, 5%, and 10% NaOH) was systematically investigated using Fourier Transform Infrared Spectroscopy (FT-IR), Thermogravimetric Analysis (TGA), and dynamic rheology. Overall, the results show that the composites exhibit different properties of the hydrogel networks compared to the pure hydrogel gums, strongly depending on the alkaline treatment. In all composite hydrogels, a significant increase in the number of interacting rheological units occurs, though the strength of the interactions decreases in Guar and Tara composites, which exhibit partial structural destabilization. In contrast, Xanthan–Cellulose Citrate hydrogels display enhanced strong gel character, and crosslinking density. These improvements reflect stronger intermolecular associations and a more compact polymer network, due to the favorable H-bonding and ionic interactions among Xanthan, Cellulose and Citrate mediated by water and sodium ions. Overall, the results demonstrate that Xanthan–Cellulose Citrate systems represent a new class of eco-friendly, mechanically robust hydrogels with controllable viscoelastic and thermal responses, features highly relevant for the next generation of flexible, self-supporting, and responsive soft materials suitable for wearable and stretchable electronic devices. Full article

The depletion of global lithium reserves, coupled with the necessity for environmentally sustainable and economically accessible energy storage systems, has driven the development of sodium-ion batteries (SIBs) as a promising alternative to lithium-ion technologies. Among various anode materials for SIBs, hard carbon exhibits obvious advantages and significant commercial potential owing to its high energy density, low operating potential, and stable capacity retention during prolonged cycling. Biomass represents the most attractive source of non-graphitizable carbon from a practical standpoint, being readily available, renewable, and low-cost. However, the complex internal structure of biomass precursors creates significant challenges for precise control of microstructure and properties of the resulting hard carbon materials, requiring further research and optimization of synthesis methodologies. This work reports the synthesis of hard carbon from Sasa kurilensis via pyrolysis at 900 °C and investigates the effect of alkaline pretreatment on the structural and electrochemical characteristics of the anode material for SIBs. Sasa kurilensis is employed for the first time as a source for non-graphitizable carbon synthesis, whose unique natural vascular structure forms optimal hierarchical porosity for sodium-ion intercalation upon thermal treatment. The materials were characterized by X-ray diffraction, infrared and Raman spectroscopy, scanning electron microscopy, X-ray microtomography and low-temperature nitrogen adsorption–desorption. Electrochemical properties were evaluated by galvanostatic cycling in the potential range of 0.02–2 V at a current density of 25 mAhg⁻¹ in half-cells with sodium metal counter electrodes. The unmodified sample demonstrated a discharge capacity of 160 mAhg⁻¹ by the 6th cycle, with an initial capacity of 77 mAhg⁻¹. The alkaline-treated material exhibited lower discharge capacity (114 mAhg⁻¹) and initial Coulombic efficiency (40%) due to increased specific surface area, leading to excessive electrolyte decomposition. Full article

This review relates the kinetics of anaerobic digestion (AD) to energy outcomes, including typical ranges of methane yields and volumetric methane productivities (down to hourly g L⁻¹ h⁻¹ scales relevant for industrial plants). It further translates these relationships into practical control principles that support stable, high methane productivity. Evidence spans substrate selection and co-digestion with emphasis on carbon/nitrogen (C/N) balance, pretreatment strategies, and reactor operation, linking process constraints with operating parameters to identify interventions that raise performance while limiting inhibition. Improving substrate accessibility is the primary step: pretreatment and co-digestion shift limitation beyond hydrolysis and allow safe increases in organic loading. Typical mesophilic operation involves hydraulic retention times of about 10–40 days for food waste and 20–60 days for different types of livestock manure and slowly degradable energy crops, with stable performance achieved when the solids retention time (SRT) is maintained longer than the hydraulic retention time (HRT). Stability is further governed by sustaining a low hydrogen partial pressure through hydrogenotrophic methanogenesis. Temperature and pH define practicable operating ranges; meanwhile, mixing should minimise diffusion resistance without damaging biomass structure. Early-warning indicators—volatile fatty acids (VFAs)/alkalinity, the propionate/acetate ratio, specific methanogenic activity, methane (CH₄)% and gas flow—enable timely adjustment of loading, retention, buffering, mixing intensity and micronutrient supply (Ni, Co, Fe, Mo). In practice, robust operation is generally associated with VFA/alkalinity ratios below about 0.3 and CH₄ contents typically in the range of 50–70% (v/v) in biogas. The review consolidates typical feedstock characteristics and biochemical methane potential (BMP) ranges, as well as outlines common reactor types with their advantages and limitations, linking operational choices to energy yield in combined heat and power (CHP) and biomethane pathways. Reported pretreatment effects span approximately 20–100% higher methane yields; for example, 18–37% increases after mechanical size reduction, around 20–30% gains at 120–121 °C for thermal treatments, and in some cases nearly a two-fold increase for more severe thermal or combined methods. Priorities are set for adaptive control, micronutrient management, biomass-retention strategies, and standardised monitoring, providing a coherent route from kinetic understanding to dependable energy performance and explaining how substrate composition, pretreatment, operating parameters, and kinetic constraints jointly determine methane and energy yield, with particular emphasis on early-warning indicators. Full article

Dark fermentation of food waste for biohydrogen production can simultaneously achieve waste resource utilization and clean energy production. However, the widespread application of this technology remains constrained by challenges such as low substrate hydrolysis efficiency and suboptimal metabolic performance of functional microorganisms. This study evaluated the synergistic enhancement of biohydrogen production from food waste through dark fermentation by integrating thermal–alkaline (TA) pretreatment with varying concentrations (50, 100, 150, and 200 mg/L) of nickel–cobalt oxide nanoparticles (NiCo₂O₄ NPs), and the underlying mechanisms involved were systematically elucidated. The results demonstrated that individual TA pretreatment (pH 11, 70 °C, 1 h) and TA coupled with NiCo₂O₄ NPs (100 mg/L) significantly (p < 0.01) enhanced the cumulative biohydrogen yields of the food waste dark fermentation by 20.89% and 35.76%, respectively. Mechanism research revealed that TA pretreatment effectively facilitated the dissolution and hydrolysis of macro-molecular organics such as polysaccharides and proteins, thereby enhancing the bio-accessibility of fermentation substrates. The introduction of NiCo₂O₄ NPs further intensified the microbial biohydrogen-producing metabolism by augmenting enzymatic activity and enriching functional bacteria. NiCo₂O₄ NPs significantly (p < 0.001) enhanced the overall activity of hydrogenase by 95.10% compared to the control group (CG) by providing the cofactor of hydrogenase and accelerating electron transfer. Additionally, this synergistic strategy significantly (p < 0.01) increased the activities of hydrolases (e.g., protease and α-glucosidase), as well as key enzymes in acetate-type and butyrate-type fermentation pathways (e.g., acetate kinase and butyrate kinase), and enriched the biohydrogen-producing microbial community centered on Clostridium_sensu_stricto_1. This study systematically elucidated the synergistic strategy of TA pretreatment and NiCo₂O₄ NPs, which achieved dual-pathway reinforcement from substrate degradability to microbial metabolic activity. The findings are expected to provide theoretical support for developing efficient biohydrogen production technology from perishable organic solid waste. Full article

This study evaluates four physicochemical pretreatments—ultra-fine grinding, roasting, alkaline pressure oxidation (POX), and oxidative ammoniacal pre-leaching—for improving gold extraction from a refractory sulfide concentrate produced trough flotation. The gold extraction by direct cyanidation is only ~48.6%, mainly due to the encapsulation of gold by associated minerals. Ultra-fine grinding increased the BET surface area eight-fold but depressed gold dissolution from 74% to 18% due to accelerated thiosulfate decomposition and copper (I) passivation in the presence of a bigger surface area. Oxidative roasting at 750 °C converted pyrite–pyrrhotite to hematite without liberating additional gold, indicating limited benefit from thermal treatment. POX was conducted at 190 °C and 10 bar O₂ dissolved 33% of the solids and yielded only 26% of gold in a thiosulfate leaching step with 50% of the thiosulfate consumption. In contrast, a two-step oxidative ammoniacal conditioning (0.4 M NH₃ + 10 mM Cu²⁺ for 42 h) followed by thiosulfate leaching boosted gold extraction from 71% to 85% while cutting thiosulfate consumption from 48.4 to 29.0 kg t⁻¹. The results demonstrate that among the pretreatments investigated, oxidative ammoniacal pre-leaching provides the most effective and environmentally benign route to unlock encapsulated gold and enhance reagent efficiency for thiosulfate processing of refractory gold ore. Full article

Lignocellulosic residues represent a promising source of raw material for obtaining several high-value bioproducts, including cellulose and derivatives. One of the main barriers to cellulose extraction from these residues is the presence of other components associated with the cellulose matrix, such as lignin and hemicellulose. To overcome this limitation, it is necessary to apply specific treatments to remove these constituents. In this study, the effectiveness of three chemical treatment methods in the purification of cellulose extracted from urban pruning biomass of the species Clitoria fairchildiana were evaluated, namely (i) alkaline treatment using dilute sodium hydroxide solution; (ii) alkaline treatment followed by bleaching with hydrogen peroxide; and (iii) alkaline treatment followed by bleaching with hydrogen peroxide and sodium hydroxide combined. The changes in chemical composition and thermal properties caused by each method were analyzed using techniques such as Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). The results demonstrated that the biomass pretreatment reduced the content of impurities, lignin, and hemicellulose, increasing the cellulose content to 37.16% in the combined treatment (H₂O₂ + NaOH). Furthermore, the FTIR spectra revealed characteristic bands of important functional groups, which reaffirmed the chemical structure of the extracted cellulose through the identification of hydroxyl, carbonyl groups, and C-H bending vibrations. Additionally, the SEM results indicated an increase in specific surface area and greater exposure of fibrils, providing visual confirmation of the removal of constituents from the cellulosic matrix. Collectively, these results demonstrate the potential of combined chemical treatments for the valorization of Clitoria fairchildiana biomass and indicate its technical feasibility for obtaining cellulose with a higher degree of purity. Full article

Cementation using Ordinary Portland Cement (OPC) remains the standard method for conditioning low- and intermediate-level radioactive waste, including Spent Ion Exchange Resins (SIERs). This work presents an integrated strategy involving thermal pretreatment to minimize waste volume and eliminate organic constituents, followed by encapsulation within three distinct binders: CEM I, CEM III, and a novel one-part geopolymer. The one-part geopolymer system represents a significant operational innovation, enabling safe and simple “just-add-water” processing and avoiding the need to handle alkaline solutions. The proposed geopolymer, synthesized from metakaolin, blast furnace slag, and solid sodium silicate, was systematically benchmarked against conventional OPC matrices (CEM I, CEM III) by assessing their capacity to immobilize thermally treated SIER ashes under accelerated leaching conditions. For benchmarking, leaching indices for Cs and Sr were determined following the ANSI/ANS 16.9 standard protocol in three representative environments simulating operational and long-term repository scenarios, providing a quantitative evaluation of radionuclide retention and matrix durability. Results indicate that the one-part geopolymer improved leaching indices for Cs and Sr compared to both cementitious binders and complied with regulatory waste acceptance criteria. The comparative results highlight the potential of geopolymer technology to increase waste loading efficiencies and improve long-term safety, establishing a robust framework for future radioactive waste management approaches. Full article

Rich in cellulose, the agro-industrial residue of “Cocos nucifera L.” stands out due to its high global production. In view of this, this research into the development of cellulose nanofibrils from green coconut fiber residue evaluated the fiber produced from an alkaline pre-treatment associated with a grinding process using a colloidal mill, which produced pure and renewable cellulose with characteristics similar to those of commercial celluloses. FTIR and XRD spectroscopy analyses showed that the methodologies established for coconut fiber are efficient in removing amorphous groups. The XRD corroborated the spectrogram and revealed a peak at 2θ = 22°, corresponding to the crystalline region of cellulose I. Both analyses were preceded by thermal analysis showing a reduction in lignin and an increase in the cellulose fraction. The AFM and SEM morphological micrographic analyses confirm the efficiency of the mechanochemical treatment in producing nanometric fibers, which, when submitted to rheology analyses, presented the desired gel profile. Full article

Industries containing excess acid or alkaline wastewater exacerbate water security. As a semi-crystalline engineering thermoplastic with superior chemical resistance, exceptional mechanical strength, and outstanding thermal stability, polyetheretherketone (PEEK) is a promising candidate for advanced functional membranes in water remediation. Herein, we present a comprehensive overview of recent advances in PEEK materials, encompassing PEEK membrane fabrication, strategies for membrane hydrophilic modification, and applications in wastewater treatment. Specifically, research efforts have focused on membrane preparation methods such as nonsolvent-induced phase separation (NIPS), thermally induced phase separation (TIPS), and chemical-induced crystallization (CIC), which aim to address the critical challenge of forming solvent-resistant PEEK membranes while maintaining membrane performance. Additionally, various hydrophilic modification strategies (pretreatment, co-blending, and post-treatment) for PEEK membranes are discussed to alleviate membrane fouling problems, with in-depth discussions of diverse applications in wastewater treatment (such as the removal and purification of synthetic dyes, organic solvents, natural organic matter removal, and oil–water mixture). The review concludes with an emphasis on the current challenges and potential of PEEK membrane for wastewater treatment. Full article

Various pretreatment methods for the valorization of sunflower husks (SHs) for H₂ gas generation through fermentation by Escherichia coli were investigated. We analyzed thermal treatment (TT), acid hydrolysis (AH), and alkaline hydrolysis (AlkH) at different substrate concentrations (50 g L⁻¹, 75 g L⁻¹, 100 g L⁻¹, and 150 g L⁻¹) and dilution levels (undiluted, 2× diluted, and 5× diluted). A concentration of 75 g L⁻¹ SH that was acid-hydrolyzed and dissolved twice in the medium yielded optimal microbial growth, reaching 0.3 ± 0.1 g cell dry weight (CDW) L⁻¹ biomass. The highest substrate level enabling effective fermentation was 100 g L⁻¹, producing 0.37 ± 0.13 (g CDW) × L⁻¹ biomass after complete fermentation, while 150 g L⁻¹ exhibited pronounced inhibitory effects. It is worth mentioning that the sole alkaline treatment was not optimal for growth and H₂ production. Co-fermentation with glycerol significantly enhanced both biomass formation (up to 0.42 ± 0.15 (g CDW) × L⁻¹)) and H₂ production. The highest H₂ yield was observed during batch growth at 50 g L⁻¹ SH hydrolysate with 5× dilution, reaching up to 5.7 mmol H₂ (g sugar)⁻¹ with glycerol supplementation. This study introduces a dual-waste valorization strategy that combines agricultural and biodiesel industry residues to enhance clean energy generation. The novelty lies in optimizing pretreatment and co-substrate fermentation conditions to maximize both biohydrogen yield and microbial biomass using E. coli, a widely studied and scalable host. Full article

In this study, a graphene oxide (GO)/zinc oxide (ZnO)/hydroxyapatite (nHAp) composite coating was constructed on a pure titanium surface by microarc oxidation (MAO) pretreatment combined with hydrothermal technology (HT), thereby making it possible to explore the performance optimization of this coating for Ti-based implants. Scanning electron microscopy (SEM), an energy dispersion spectrometer (EDS), Fourier transform infrared spectroscopy (FTIR), Ramam spectroscopy (Ramam), etc., confirmed that the GO/ZnO/nHAp composites were successfully loaded onto the pure Ti surfaces. Through nanoindentation, differential thermal analysis (DiamondTG/DTA), and dynamic polarization potential detection, the GO/ZnO/nHAp composite coating imparts excellent nanohardness (2.7 + 1.0 GPa), elastic modulus (53.5 + 1.0 GPa), thermal stability, and corrosion resistance to pure Ti implants; hemolysis rate analysis, CCK-8, alkaline phosphatase (ALP) detection, alizarin red staining, and other experiments further show that the coating improves the hemocompatibility, biocompatibility, and bone guidance of the Ti implant surface. Studies have shown that GO/ZnO/nHAp composite coatings can effectively optimize the mechanical properties, corrosion resistance, biocompatibility, and bone guidance of pure Ti implants, so that they can obtain an elastic modulus that matches human bone. Full article

Spent hops from the supercritical extraction process represent a valuable source of xanthohumol (XN), a prenylated flavonoid with demonstrated anticancer, antidiabetic, antibacterial, and anti-inflammatory properties. However, XN is thermally sensitive and readily isomerizes into the less bioactive iso-XN at elevated temperatures, necessitating mild extraction conditions. Previous studies have shown that the pretreatment of plant biomass can enhance the extraction efficiency of bioactive compounds. In this study, various pretreatment methods—including physical (freeze–thaw, ultrasound, and microwave), chemical (acid and base hydrolysis), and enzymatic approaches—were applied to spent hops prior to extraction, and XN yields were compared to those obtained from untreated samples. The experiments, performed in triplicate, yielded meaningful results which helped understand the raw material’s behavior in applied conditions. Due to the compound’s high thermal sensitivity, ultrasound and microwave pretreatments require precise control to prevent excessive temperature increases, making low-temperature methods more suitable. Additionally, exposure to elevated pH adversely affected XN extraction efficiency, limiting the applicability of strong alkaline pretreatments. Among the evaluated methods, freeze–thaw pretreatment proved to be a simple and effective strategy, enhancing XN extraction yields by up to 10.7 ± 0.7% through the optimization of soaking time, the solid-to-liquid ratio, and the thawing temperature. Identifying an inexpensive and efficient pretreatment method could reduce extraction time while improving yield, contributing to the sustainable utilization of spent hops as an XN source. Full article

Triclosan (TCS) is extensively detected in wastewater and waste-activated sludge (WAS). The occurrence and fate of TCS in anaerobic digestion have been well revealed, but the change in TCS during WAS pretreatment needs to be clarified. Thermal hydrolysis pretreatment has been proven to be efficient for both WAS hydrolysis and TCS removal, with a removal efficiency of 54.0% and a retention time of 90 min at 170 °C. Alkaline pretreatment remarkably changed the TCS distribution between the sludge and liquid, and the solid–liquid distribution coefficient decreased by three orders of magnitude as the pH increased to 13. Neither alkaline pretreatment nor thermal–alkaline pretreatment resulted in the obvious removal of TCS. UP demonstrated limited efficiency in the hydrolysis of WAS, as well as the migration and removal of TCS. Thus, this study demonstrated that pretreatment methods and operational parameters significantly influence the migration and removal of TCS. It also provides a valuable reference for future studies on the migration and degradation behavior of TCS during anaerobic digestion and lays a foundation for the development of WAS treatment engineering capable of efficiently removing TCS. Full article

This study investigates the sustainable use of Eucalyptus spp. bark through different chemical (hydrothermal, acid, alkaline, and bleaching) and physical (milling) pretreatments in the production of sustainable films. Valorization of agro-industrial residues and the demand for sustainable materials pose challenges for environmentally responsible solutions. Eucalyptus spp. bark, rich in cellulose, hemicellulose, and lignin, is a promising source for creating sustainable materials like films. In this study, the use of chemical and physical treatments aims to optimize biomass extraction and improve the chemical, thermal, mechanical, and optical properties of the films. The films showed an excellent light barrier capacity, with a transmittance below 1%. Crystallinity indices varied with the pretreatment: 8.15% for hydrothermal, 7.01% for alkaline, 7.63% for acid, and 10.80% for bleaching. The highest crystallinity value was obtained through bleaching, by removing amorphous components like lignin and hemicellulose. The alkaline pretreatment yielded stronger films (maximum stress of 8.8 MPa, Young’s modulus of 331.3 MPa) owing to the retained lignin and the hemicellulose reinforcing the material. This study contributes to the field of sustainable development by converting residues into valuable materials and by advancing the circular economy. The films’ specific properties make them suitable for applications like sustainable packaging, addressing environmental and industrial challenges. Full article