Search Results (82)

This paper is about the design and fabrication of infrared lenses, which are the core components of thermal imaging cameras to be mounted on vehicles. To produce an athermalized optical system, chalcogenide glass (As₄₀Se₆₀) with a lower thermo-optic coefficient (dn/dT) than germanium was adopted as a lens material, and each lens was designed so that defocus occurs in opposite directions depending on temperature. The designed lens was fabricated using a compression molding method, and the molded lenses showed less than 1.5 μm of form error (PV) using a mold iteration process. Through evaluations of MTF and thermal images obtained from the lens module, it was judged that this optical design process is obtainable. Full article

This review examines the design of thermal control systems for state-of-the-art deep ultraviolet (DUV) and extreme ultraviolet (EUV) projection lithography tools. The lithographic system under investigation integrates several critical subsystems along the optical transmission chain, including the light source, reticle stage, projection optics (featuring DUV refractive lenses and EUV multilayer mirrors), immersion liquid, wafer stage, and metrology systems. Under high-power irradiation conditions with concurrent thermal perturbations, the degradation of thermal stability and gradient uniformity within these subsystems significantly compromises exposure precision. Through a systematic analysis of the thermal challenges specific to each subsystem, this review synthesizes established thermal control systems across two technical dimensions: thermal control structures and thermal control algorithms. Prospects for future advancements in lithographic thermal control are also discussed. Full article

This study extends the application of photothermal spectroscopy to explore heat transfer dynamics in biological fluids, focusing on the examination of artificial vitreous humor (VH) models of human VH and an endogenous sample of cervine (deer) VH. The research integrates previously established methods for analyzing thermal lensing through photothermal deflection. By visualizing convective and conductive heat transfer processes in the artificial components of human VH, one gains insights into the dynamic behavior of heat transfer in the VH. Relevance extends to clinical cases where pathology requires replacement of endogenous VH with an artificial VH substitute. Several VH substitutes identified in the literature were chosen for this study based on their physical properties and relative abundance in the VH. Individual component fluids, and mixtures of these components, were analyzed at various concentrations based on their physiological concentration ranges in the human VH as they varied with age, sex, and certain disease states. By way of comparison to endogenous biological VH, a sample of VH obtained from a female white-tailed deer eye was analyzed, enhancing the understanding of heat transfer in artificial components of the VH compared to endogenous VH. There is a vast array of ophthalmological procedures that utilize an external heat source interacting with endogenous or artificial VH. The data found in this study will progress the understanding of heat transfer within artificial VH components in comparison to endogenous VH and contribute to the advancement of certain ophthalmological procedures. Full article

We describe the output characteristics of a compact, passively Q-switched, diode-end-pumped (Er/Yb):Glass laser operating in a multi-pulse burst mode. Such operation enables much higher optical efficiency and larger output of total energy than possible with conventional solitary pulse emissions. The laser generated a 15-pulse burst of pulses at 1.5 μm with a combined energy of 5.8 mJ. Measurements of pulse energies, spatial mode characteristics, output beam divergence, and impact of thermal effects in the (Er/Yb):Glass are described. These results are compared to predictions of a numerical simulation using a finite-difference beam propagation method (FD-BPM) that incorporates thermal effects caused by distributed local heating in the glass. We show good agreement between the measured and simulated laser output characteristics. Full article

Urban heat stress is becoming increasingly urgent, yet it remains understudied within the broader intersection of climate change and spatial justice. While urban climate scholarship has largely focused on climatic impacts such as flooding, rising sea levels, and prolonged droughts, the socio-spatial lens of urban heat in marginalised and low-income urban communities has received limited attention. This article, grounded in a systematic review of the global literature, foregrounds the mechanisms through which heat functions as a site of socio-environmental injustice. We argue that fragmented urban morphologies, entrenched spatial inequalities, and uneven adaptation strategies collectively produce and sustain heat vulnerability. The article identifies three interrelated conceptual framings that elucidate the production and persistence of heat inequity: transitional injustice, green climate gentrification, and intersectional adaptation praxis. These lenses reveal how heat risk is differentially distributed, governed, and experienced with broader discourses of urban marginalisation, environmental dispossession, and epistemic exclusion. We contend that advancing climate justice in the context of urban heat requires moving beyond technocratic and elite-oriented adaptation, toward multi-scalar planning paradigms that recognise embodied vulnerability, structural inequality, and the socio-political ecologies of thermal exposure. By theorising urban heat through the lens of climate justice, this article contributes to a more expansive and critical understanding of urban climate risk, one that situates heat inequity within the broader structures of power, governance, and spatial exclusion shaping contemporary urban environments. Full article

This study evaluates the optical and thermal performance of near-infrared (NIR)-blocking spectacle lenses at luminous transmittance grades of 0, 2, and 3. Ten lens types were tested, including clear, tinted, and NIR-blocking spectacle lenses (NIBSL). The NIR blocking rate was measured across 780–1100 nm and 1100–1400 nm wavelength bands. Color reproduction was assessed using sharpness (MTF 50), point spread function (PSF), and color accuracy (ΔE₀₀) under 1000 lux outdoor illumination. Thermal insulation was analyzed by monitoring porcine skin temperature at 36 °C and 60 °C under each lens type. As a result, the NIBSL showed better near-infrared blocking performance than other types of lenses in both wavelength ranges, and the coated NIBSL blocked near-infrared more effectively than the polymerized lenses. Compared with other types of lenses, NIBSL showed no difference in object identification, color recognition, and reproducibility, so there is no problem in using them together. Strong correlations were observed between lens surface temperature and underlying pig skin temperature, and inverse correlations between NIR blocking rate and pig skin temperature gradient. These findings confirm that NIBSL offer enhanced protection against NIR-induced thermal effects without compromising optical performance, supporting their use in daily environments for ocular and skin safety. Full article

Many kinds of silicones are a wide family of hybrid inorganic–organic polymers which have valuable physical and chemical properties and find plenty of practical applications, not only industrial, but also numerous medical and pharmaceutical ones, mainly due to their good thermal and chemical stability, hydrophobicity, low surface tension, biocompatibility, and bio-durability. The important biomedical applications of silicones include drains, shunts, and catheters, used for medical treatment and short-term implants; inserts and implants to replace various body parts; treatment, assembly, and coating of various medical devices; breast and aesthetic implants; specialty contact lenses; and components of cosmetics, drugs, and drug delivery systems. The most important achievements concerning the biomedical and pharmaceutical applications of silicones, their copolymers and blends, and also silanes and low-molecular-weight siloxanes have been summarized and updated. The main physiological properties of organosilicon compounds and silicones, and the methods of antimicrobial protection of silicone implants, have also been described and discussed. The toxicity of silicones, the negative effects of breast implants, and the environmental effects of silicone-containing personal care and cosmetic products have been reported and analyzed. Important examples of the 3D printing of silicone elastomers for biomedical applications have been presented as well. Full article

Shaping or splitting of a Gaussian beam is often desired to optimise laser–material interactions, improving throughput and quality. This can be achieved holographically using liquid crystal-on-silicon spatial light modulators (LC-SLMs). Until recently, maximum exposure has been limited to circa 120 W average power with a Gaussian profile, restricting potential applications due to the non-linear (NL) phase response of the liquid crystal above this threshold. In this study, we present experimental tests of a new SLM device, demonstrating high first-order diffraction efficiency of η = 0.98 ± 0.01 at 300 W average power and a phase range Δφ > 2π at P = 383 W, an exceptional performance. The numerically calculated device temperature response with power closely matches that measured, supporting the higher power-handling capability. Surface modification of mild steel and molybdenum up to P = 350 W exposure is demonstrated when employing a single-mode (SM) fibre laser source. Exposure on mild steel with a vortex beam (m = +6) displays numerous ringed regions with varying micro-structures and clear elemental separation created by the radial heat flow. On molybdenum, with multi-spot Gaussian exposure, both MoO₃ films and recrystallisation rings were observed, exposure-dependent. The step change in device capability will accelerate new applications for this LC-SLM in both subtractive and additive manufacturing. Full article

Background and Objectives: In previous studies, we reported that the assessment of the cumulative thermal dose in the crystalline lens, conducted through computational modeling utilizing a supercomputer and the biothermal transport equation, exhibited a significant association with the incidence of nuclear cataracts. In this study, we have investigated the types of proteins that expressed underlying 35.0 °C (normal-temp) and 37.5 °C (warming-temp) by using the shotgun liquid chromatography (LC) with tandem mass spectrometry (MS/MS)-based global proteomic approach. Materials and Methods: We have discussed the changes in protein expression in warmed iHLEC-NY2 cells using Gene Ontology analysis and a label-free semiquantitative method based on spectral counting. Results: In iHLEC-NY2, 615 proteins were detected, including 307 (49.9%) present in both lenses cultured at normal-temp and warming-temp, 130 (21.1%) unique to the lens cultured at normal-temp, and 178 (29.0%) unique to the lens cultured at warming-temp. Furthermore, LC–MS/MS analysis showed that warming decreased the expression of actin, alpha cardiac muscle 1, actin-related protein 2, putative tubulin-like protein alpha-4B, ubiquitin carboxyl-terminal hydrolase 17-like protein 1, ubiquitin-ribosomal protein eL40 fusion protein, ribosome biogenesis protein BMS1 homolog, histone H2B type 1-M, and histone H2A.J. in iHLEC-NY2. Conclusions: The decreases in the specific protein levels of actin, tubulin, ubiquitin, ribosomes, and histones may be related to cataract development under warming conditions. This investigation could provide a critical framework for understanding the correlation between temperature dynamics and the development of nuclear cataracts. Full article

The recent astrometric data of hundreds of millions of stars from Gaia DR3 has allowed for a precise determination of the Milky Way rotation curve up to 28 kpc. The data suggest a rapid decline in the density of dark matter beyond 19 kpc. We fit the whole rotation curve with four components (gas, disk, bulge, and halo), and compute the microlensing optical depth to the Large Magellanic Cloud. With this model of the galaxy we reanalyse the microlensing events of the MACHO and EROS-2 Collaborations. Using the published MACHO efficiency function for the duration of their survey, together with the rate of expected events according to the new density profile, we find that the Dark Matter halo could be composed of up to 20% of massive compact halo objects for any mass between $0.001$ to $1M_{\odot }$. For the EROS-2 survey, using a modified efficiency curve for consistency with the MACHO analysis, we also find compatibility with a MACHO halo, but with a tighter constraint around $0.005M_{\odot }$ where the halo fraction cannot be larger than ∼10%. This result assumes that all the lenses have the same mass. If these were distributed in an extended mass function like that of the Thermal History Model, the constraints are weakened, allowing 100% of all DM in the form of Primordial Black Holes. Full article

Tungsten oxide (WO₃) electrochromic devices are obtaining increasing interest due to their color change and thermal regulation. However, most previous work focuses on the absorption or transmission spectra of materials, rather than the optical parameters evolution in full spectrum in the electrochromic processes. Herein, we developed a systematic protocol of ex situ methods to clarify the evolutions of subtle structure changes, Raman vibration modes, and optical parameters of WO₃ thin films in electrochromic processes as stimulated by dosage-dependent Li⁺ insertion. We obtained the below information by ex situ spectroscopic ellipsometry. (1) Layer-by-layer Li⁺ embedding mechanism demonstrated by individual film thickness analysis. (2) The details of its optical leap in the Brillouin zone in the full spectral. (3) The optical constants varied with the Li⁺ insertion in the ultraviolet, visible, and near-infrared bands, demonstrating the potential for applications in chip fabrication, deep-sea exploration, and optical measurements. (4) Simulated angular modulation laws of WO₃ films for full spectra in different Li⁺ insertion states. This ex situ method to study the optical properties of electrochromic devices are important for monitoring phase transition kinetics, the analysis of optical leaps, and the study of ion diffusion mechanisms and the stoichiometry-dependent changes in optical constants over the full spectral. This work shows that electrochromic films in Li⁺ surface permeation can be applied in the field of zoom lenses, optical phase modulators, and other precision optical components. Our work provides a new solution for the development of zoom lenses and a new application scenario for the application of electrochromic devices. Full article

This study investigates the dynamics of thermal plumes interacting with the liquid–air interface in straight-chain alcohols and their mixtures using a photothermal imaging technique based on thermal lensing. This method enables the indirect measurement of temperature gradients via changes in refractive index caused by localized laser heating. Employing a collimated laser beam, the results show the formation and evolution of cylindrical heated zones and their interactions with the liquid–air interface. The study reveals that, while some alcohols exhibit stable surface behaviors, others demonstrate complex dynamical behaviors, including strong stable steady-state oscillations. The findings contribute to understanding fluid dynamics in molecular liquids near their liquid–air interfaces. Full article

In this work, we conducted a numerical analysis to investigate the combined effect of thermal lensing and bending-induced mode distortion on transverse mode instability in conventional large-mode-area (LMA) step-index fibers. Utilizing the finite element method, conformal mapping, and thermal conduction equations, we simulated the mode profiles in LMA 20/400 and 25/400 fibers subjected to both bending and thermal lensing effects; the corresponding evolution of mode loss and effective area were explored as well. Additionally, by introducing the derived mode profiles to the TMI coefficient calculations, we analyzed the influence of bending and thermal lensing (TL) on TMI; the simulation results indicate that the mode distortion caused by bending and the TL effect, under the bending conditions commonly encountered in practice, do not have pronounced impacts on TMI coefficient and TMI threshold. Full article

This paper presents the design and optimization of a composite flexible support structure aimed at addressing the challenges associated with maintaining the positional accuracy and surface integrity of large-aperture cryogenic infrared lenses with long focal lengths. The primary objective of the structure is to maintain precise lens alignment while preserving the surface shape under operational conditions. The design complexities and underlying principles of the flexible support structure are systematically explored. A mechanical model of the flexible support structure was derived based on its structural characteristics, and the equilibrium equation was established to ensure the lens meets thermal deformation requirements in various directions. Optimization of key design parameters was conducted for a lens operating at 200 K, measuring 304 mm × 230 mm. The gravitational deformation of the optimized lens exhibited a root mean square (RMS) surface accuracy of 7.72 nm in the X direction, 7.08 nm in the Y direction, and 9.60 nm in the Z direction for lens surface 1. For lens surface 2, RMS values were 8.62 nm in the X direction, 8.41 nm in the Y direction, and 9.64 nm in the Z direction. At 200 K and lower temperatures, the RMS values of lens surfaces 1 and 2 were 2.41 nm and 2.74 nm, respectively, with a first-order mode frequency of 143.37 Hz. Full article

A multirod Ce:Nd:YAG solar laser approach, using a Fresnel lens as a primary concentrator, is here proposed with the aim of considerably increasing the efficiency of solar-pumped lasers. Fresnel lenses are cost-effective, rendering solar lasers more economically competitive. In this work, solar-pumped radiation collected and concentrated using the Fresnel lens is received by a secondary three-dimensional compound parabolic concentrator which transmits and funnels the light toward the Ce:Nd:YAG laser rods within a water-cooled tertiary conical concentrator that enables efficient multipass pumping of the rods. To explore the full potential of the proposed approach, the performance of various multirod configurations is numerically evaluated. Through this study, configurations with three and seven Ce:Nd:YAG rods are identified as being the most efficient. A maximum continuous wave total laser power of 122.8 W is reached with the three-rod configuration, marking the highest value from a Ce:Nd:YAG solar laser, leading to solar-to-laser conversion and collection efficiencies of 7.31% and 69.50 W/m², respectively. These results represent enhancements of 1.88 times and 1.79 times, respectively, over the previous experimental records from a Ce:Nd:YAG/YAG single-rod solar laser with a Fresnel lens. Furthermore, the above results are also 1.58 times and 1.68 times, respectively, greater than those associated with the most effective three-rod Ce:Nd:YAG solar laser utilizing a parabolic mirror as the main concentrator. The present study also shows the great usefulness of the simultaneous pumping of multiple laser rods in terms of reducing the thermal stress effects in active media, being the seven-rod configuration the one that offered the best compromise between maximum efficiency and thermal performance. This is crucial for the applicability of this sustainable technology, especially if we wish to scale our system to higher power laser levels. Full article