Search Results (23)

Background: The present work is devoted to the biological effects of sol–gel-derived silica (Si)–copper (Cu) nanomaterials. Methods and Results: Tetraethyl orthosilane (TEOS) was used as a silica precursor; copper was introduced as a solution in ethanol with Cu(OH)₂. The obtained samples were denoted as Si/Cu (gel) and Si/Cu/500 (500 °C heat-treated). Their phase formation and morphology were studied by XRD and SEM. The antibacterial activity was tested by two Gram-positive bacteria, three Gram-negative bacteria, and two types of eukaryotic species. Most bacteria were more sensitive to Si/Cu/500 materials than to Si/Cu (gel). The yeasts were more sensitive to Si/Cu (gel). The new nanomaterials were tested for oxidant activity at pH 7.4 (physiological) and pH 8.5 (optimal) in three model systems by the chemiluminescent method. They significantly inhibited the generation of free radicals and ROS. This result underlines their potential as regulators of the free radical processes in living systems. The epithelial tumor cell lines appeared more sensitive than the non-transformed fibroblasts, likely due to their metabolic activity and proliferation rates, leading to greater accumulation of the substances. Using Daphnia magna, the ecotoxicity study showed that the LC₅₀ was reached at 1 mg/L of Si/Cu/500. Si/Cu (gel) was more toxic. Conclusions: Our results reveal the potential of these nanohybrids to be applied in living, eukaryotic systems. The cytotoxicity evaluation showed higher tolerance of normal, non-transformed cells, in concurrence with the oxidation tests. Full article

This study focused on the development of Na⁺ ion sensing devices on a flexible substrate and investigated the impact of various additive materials on its sensing performance. For the Na⁺ ion sensing aspect, the film on the carbon working electrode used tert-butyl calix[4]arene tetraethyl acetate as the ion carrier. The main component of the film was polyvinyl chloride (PVC), with a plasticizer added to enhance its flexibility, ensuring better adaptation to the flexible substrate. In this base formulation, graphene oxide (GO) or multi-walled carbon nanotubes (MWCNTs) were incorporated into the sensing electrode to explore their effects on Na⁺ ion sensing capabilities. The results demonstrated that adding MWCNTs significantly improved the sensor’s sensitivity to Na⁺ ions. In addition, the study used the response slope to Na⁺ ions as a comparative reference for selectivity by calculating the ratio of the Na⁺ ion response slope to the response slopes of other ions (such as K⁺ and Ca²⁺). The findings showed that the sensors with MWCNTs exhibited better selectivity than the others with GO, and therefore, further analysis was performed on the response time of the sensors with MWCNTs. The results indicated that incorporating MWCNTs reduced the sensors’ response time and enhanced their overall sensitivity. However, excessive addition of MWCNTs would lead to a decrease in the selectivity of the fabricated sensors. This suggests that while MWCNTs offer promising improvements in performance, their concentration must be carefully optimized to maintain the sensors’ selectivity. Full article

This study investigates the effect of incorporating modified calcium carbonate whiskers, treated with tetraethyl orthosilicate (TEOS), to enhance the mechanical properties and sealing integrity of oil well cement under high-temperature and high-pressure (HTHP) conditions. Traditional cement systems are prone to brittleness and cracking under dynamic loads, leading to compromised wellbore sealing performance. Our findings demonstrate that fiber-toughened cement slurry improves the toughness and sealing performance of the cement annulus, maintaining gas tightness and mechanical integrity under cyclic alternating pressures at 150 °C. Specifically, the inclusion of 5% modified whisker fibers improves compressive strength by 24.5% and flexural strength by 43.3% while maintaining stable rheological and thickening properties. These results support the hypothesis that modified whisker fibers enhance the durability and sealing integrity of cement wellbores under extreme conditions, providing a practical solution for challenging cementing applications. Full article

Spin crossover (SCO) iron (II) coordination compounds in the form of nanohybrid SCO@SiO₂ particles were prepared using a reverse micelles technique based on the TritonX-100/cyclohexane/water ternary system. Tetraethyl orthosilicate (TEOS) acts as precursor of both the SiF₆²⁻ counter-anion and SiO₂ to obtain Fe(NH₂trz)₃(BF₄)_2−x(SiF₆)_x/2@SiO₂ nanoparticles with different sizes and morphologies while modifying the TEOS concentration and reaction time. The adjustable mixed-anion strategy leads to a range of quite scarce abrupt spin crossover behaviors with hysteresis just above room temperature (ca. 293 K), which is very promising for the integration of these materials into functional devices. Full article

Dental resin composites are widely used in clinical settings but often face longevity issues due to the development and accumulation of microcracks, which eventually lead to larger cracks and restoration failure. The incorporation of microcapsules into these resins has been explored to introduce self-healing capability, potentially extending the lifespan of the restorations. This study aims to enhance the performance of self-healing dental resins by optimizing the microcapsules–resin matrix physicochemical interactions. Poly(urea–formaldehyde) (PUF) microcapsules were reinforced with melamine and subsequently subjected to surface functionalization with 3-aminopropyltriethoxysilane (APTES) and (3-mercaptopropyl)trimethoxysilane (MPTMS). Additionally, microcapsules were functionalized with a bilayer approach, incorporating tetraethyl orthosilicate (TEOS) with either APTES or MPTMS. X-ray photoelectron spectroscopy (XPS) and thermogravimetric analysis (TGA) confirmed an increased Si:C ratio from 0.006 to 0.165. The functionalization process did not adversely affect the structure of the microcapsules or their healing agent volume. Compared to PUF controls, the functionalized microcapsules demonstrated enhanced healing efficiency, with TEOS/MPTMS-functionalized microcapsules showing the highest performance, showing a toughness recovery of up to 35%. This work introduces a novel approach to functionalization of microcapsules by employing advanced silanizing agents such as APTES and MPTMS, and pioneering bilayer functionalization protocols through their combination with TEOS. Full article

Fosmidomycin (FOS) is a naturally occurring compound active against the 1-deoxy-D-xylulose 5-phosphate reductoisomerase (DXR) enzyme in the 2-C-methyl-D-erythritol 4-phosphate (MEP) pathway, and using it as a template for lead structure design is an effective strategy to develop new active compounds. In this work, by replacing the hydroxamate unit of FOS with pyrazole, isoxazole and the related heterocycles that also have metal ion binding affinity, while retaining the monophosphonic acid in FOS or replacing it with a bisphosphonic acid group, heterocycle-containing mono- and bisphosphonic acid compounds as FOS analogs were designed. The key steps involved in the facile synthesis of these FOS analogs included the Michael addition of diethyl vinylphosphonate or tetraethyl vinylidenebisphosphonate to β-dicarbonyl compounds and the subsequent cyclic condensation with hydrazine or hydroxylamine. Two additional isoxazolinone-bearing FOS analogs were synthesized via the Michaelis–Becker reaction with diethyl phosphite as a key step. The bioactivity evaluation on model plants demonstrated that several compounds have better herbicidal activities compared to FOS, with the most active compound showing a 3.7-fold inhibitory activity on Arabidopsis thaliana, while on the roots and stalks of Brassica napus L. and Echinochloa crus-galli in a pre-emergence inhibitory activity test, the activities of this compound were found to be 3.2- and 14.3-fold and 5.4- and 9.4-fold, respectively, and in a post-emergency activity test on Amaranthus retroflexus and Echinochloa crus-galli, 2.2- and 2.0-fold inhibition activities were displayed. Despite the significant herbicidal activity, this compound exhibited a DXR inhibitory activity lower than that of FOS but comparable to that of other non-hydroxamate DXR inhibitors, and the dimethylallyl pyrophosphate rescue assay gave no statistical significance, suggesting that a different target might be involved in the inhibiting process. This work demonstrates that using bioisosteric replacement can be considered as a valuable strategy to discover new FOS analogs that may have high herbicidal activities. Full article

Owing to their composition-tunable and narrow emissions and high photoluminescence quantum yield (PLQY), inorganic halide perovskite quantum dots (IPQDs) are a promising option for wide color gamut displays. However, their practical applications have been limited by their lattice structure instability and surface defect states. Herein, CsPbBr₃:KBF₄@SiO₂ with improved stability and optical properties is successfully synthesized with a two-step optimization of fluorine (F) anion doping and SiO₂ in situ coating. Compared with bromide (Br), higher electronegativity and a smaller radius of F lead to stronger binding energy with Pb²⁺. Also, F anions can occupy surface Br vacancies. Then, benefiting from the acidic environment provided by BF₄⁻ hydrolysis, tetraethyl orthosilicate (TEOS) can be more easily hydrolyzed on the CsPbBr₃:KBF₄ surface to generate SiO₂ coating, thus further passivating lattice defects and improving environmental stability. Importantly, the PLQY of CsPbBr₃:KBF₄@SiO₂ achieves 85%, and the stability has been greatly improved compared with pure CsPbBr₃. Finally, CsPbBr₃:KBF₄@SiO₂/PDMS, CsPbI₃/PDMS, and CsPbCl₃/PDMS composites with narrow emissions are applied to replace traditional phosphors as color converters for direct-view light-emitting diode (LED) displays or liquid crystal display (LCD) backlights. The color gamut reaches 118.22% under the NTSC standard. Concerning the display field, it suggests likely applications in the future. Full article

Aviation gasoline is a fuel for spark-ignition piston internal combustion engines, which are usually used in light aircraft (small aviation and general aviation). This technique is widely used for regional and interregional transportation, for the initial training and retraining of aviation staff, for private use, for agricultural purposes, for the development of aviation sports and tourism, and for combat and rescue operations. This article gives some estimates of the production and consumption of aviation gasoline in the EU, North and South America, Asia–Pacific, Africa, and CIS countries. Export possibilities and the reliance on import within different regions are analyzed. Economic indicators for aviation gasoline are calculated by assessing the share of its production in the GDP and per capita consumption. In the context of the transition to unleaded aviation gasoline, the structure of the piston aviation fleet and its readiness for the transition are considered. The paper also analyzes the following existing components of unleaded aviation gasoline: technical capabilities and promising components. Full article

Superhydrophobic surfaces have great potential for self-cleaning, anti-icing, and drag-reducing characteristics because of their water repellent property. This study demonstrates the potential application of coatings to protect architectures from detrimental atmospheric effects via a self-cleaning approach. In this research, a SiO₂-TiO₂-PDMS composite coating was prepared on the surface of building walls by the sol-gel method. Tetraethyl orthosilicate (TEOS) and titanium isopropoxide (TTIP) were used as inorganic precursors, and polydimethylsiloxane (PDMS) was used as low surface energy substances. The effects of TEOS and PDMS content on microstructure, wettability, and self-cleaning performance of coating wall surfaces were investigated by conducting various tests, including scanning electron microscopy (SEM), X-ray energy spectroscopy (EDS), angle measurement, and Fourier transform infrared spectroscopy (FTIR). The results indicated that hydrolysis and condensation reactions of TEOS, TTIP, and PDMS were performed on the surface of the substrates, leading to a micro- and nano-structure similar to the surface of lotus leaves. When the molar ratio of PDMS to TEOS was 1:5, the static contact angle of the coating reached a maximum of 152.6°. At this point, the coated surface was able to resist the adhesion of particle pollutants and liquid pollutants, which could keep the walls clean and possess a good ability of self-cleaning. In conclusion, SiO₂-TiO₂-PDMS composite coating is potentially useful in wall protection applications with its hydrophobic and environmentally friendly superhydrophobic properties. Full article

Uniformly distributed silica/epoxy nanocomposites (2 and 6 wt.% silica content) were obtained through a “solvent-free one-pot” process. The inorganic phases were obtained through “in situ” sol-gel chemistry from two precursors, tetraethyl orthosilicate (TEOS) and (3-aminopropyl)-triethoxysilane (APTES). APTES acts as a coupling agent. Surprisingly when changing TEOS/APTES molar ratio (from 2.32 to 1.25), two opposite trends of glass transformation temperature (Tg) were observed for silica loading, i.e., at lower content, a decreased Tg (for 2 wt.% silica) and at higher content an increased Tg (for 6 wt.% silica) was observed. High-Resolution Transmission Electron Microscopy (HRTEM) showed the formation of multi-sheet silica-based nanoparticles with decreasing size at a lower TEOS/APTES molar ratio. Based on a recently proposed mechanism, the experimental results can be explained by the formation of a co-continuous hybrid network due to reorganization of the epoxy matrix around two different “in situ” sol-gel derived silicatic phases, i.e., micelles formed mainly by APTES and multi-sheet silica nanoparticles. Moreover, the concentration of APTES affected the size distribution of the multi-sheet silica-based nanoparticles, leading to the formation of structures that became smaller at a higher content. Flammability and forced-combustion tests proved that the nanocomposites exhibited excellent fire retardancy. Full article

In the present work, Yb:YAG (yttrium aluminum garnet) transparent ceramics were fabricated using monodispersed spherical Y₂O₃, Al₂O₃ powders and commercial Yb₂O₃ nano-powder as raw materials, adding 0.5 wt% tetraethyl orthosilicae (TEOS) through the solid-state method and vacuum sintering technology. The prepared monodispersed Y₂O₃ and Al₂O₃ powders adopted by homogeneous co-precipitation showed improved mixing uniformity and lead to the reduced defect of the YAG powders. After sintering in vacuum at 1700 °C for 10 h, the (Y_1−xYb_x)AG (x = 0, 0.01, 0.10) ceramics with high transparency were obtained. Analysis of the densification rate, micromorphology, and optical properties of the ceramics suggests that the performance of the Yb:YAG ceramics is independent of the doping amount of Yb. Moreover, when the Y₂O₃, Al₂O₃, and Yb₂O₃ mixtures were laid aside for some time in the air after milling and drying, the performances of the as-prepared Yb:YAG ceramics would be affected distinctively. It is likely because the Y₂O₃ is easily hydrolyzed to Y(OH)₃, Y(OH)²⁺ and Y₂(OH)₂⁴⁺, which impinged the sintering activity of the powder mixture. Full article

Recently, tin oxide (SnO₂) has been the preferred thin film material for semiconductor devices such as thin-film transistors (TFTs) due to its low cost, non-toxicity, and superior electrical performance. However, the high oxygen vacancy (V_O) concentration leads to poor performance of SnO₂ thin films and devices. In this paper, with tetraethyl orthosilicate (TEOS) as the Si source, which can decompose to release heat and supply energy when annealing, Si doped SnO₂ (STO) films and inverted staggered STO TFTs were successfully fabricated by a solution method. An XPS analysis showed that Si doping can effectively inhibit the formation of V_O, thus reducing the carrier concentration and improving the quality of SnO₂ films. In addition, the heat released from TEOS can modestly lower the preparation temperature of STO films. By optimizing the annealing temperature and Si doping content, 350 °C annealed STO TFTs with 5 at.% Si exhibited the best device performance: I_off was as low as 10⁻¹⁰ A, I_on/I_off reached a magnitude of 10⁴, and V_on was 1.51 V. Utilizing TEOS as an Si source has a certain reference significance for solution-processed metal oxide thin films in the future. Full article

In methane combustion, water tolerance of Pd-based catalysts is quite critical for stable performance, because water is produced in situ and a water-containing feed is used under real conditions. Herein, water-tolerant mesoporous silica-alumina (H-MSA) was prepared by solvent deficient precipitation (SDP) using triethoxy(octyl)silane (TEOOS) and aluminum isopropoxide (AIP). The H-MSA was more tolerant to water than γ-alumina, mesoporous alumina (MA), and mesoporous silica-alumina (MSA) synthesized by using tetraethyl orthosilicate (TEOS), because of the silica present on the external particle surface. Moreover, it exhibited better textural properties, leading to higher dispersion of PdO_x. The PdO_x catalyst supported on H-MSA was quite durable in repeated temperature-programmed cycles and isothermal tests in the presence of water vapor, compared to the reference PdO_x catalysts. The measured stability was attributed to the water tolerance, weak Lewis acidity, and penta-coordinated Al species of the H-MSA support, which was preferentially imparted when TEOOS was added for substitution of 5 mol% AIP for the synthesis of H-MSA. Therefore, the SDP method employed herein is useful in endowing supported PdO_x catalysts with the water tolerance necessary for stable methane combustion performance under wet conditions. Full article

A ZSM-5 zeolite with a hierarchical pore structure was synthesized by the desilication-recrystallization method using tetraethyl ammonium hydroxide (TEAOH) and cetyltrimethylammonium bromide (CTAB) as the desilication and structure-directing agents, respectively. The MnO_x/ZSM-5 catalyst was synthesized by the ethanol dispersion method and applied for the low-temperature selective catalytic reduction of NO_x with NH₃. The results showed that NO_x conversion of the hierarchical MnO_x/ZSM-5 catalyst could reach 100% at about 120 °C and could be maintained in the temperature range of 120–240 °C with N₂ selectivity over 90%. Furthermore, the hierarchical MnO_x/ZSM-5catalyst presented better SO₂ resistance performance than the traditional catalyst in the presence of 100 ppm SO₂ at 120 °C. XRD, SEM, TEM, XPS, BET, NH₃-TPD, and TG were applied to characterize the structural properties of the MnO_x/ZSM-5 catalysts. These results showed that the MnO_x/ZSM-5 catalyst had micropores (0.78 nm) and mesopores (3.2 nm) leading to a larger specific surface area, which improved the mass transfer of reactants and products while reducing the formation of sulfates. The better catalytic performance over hierarchical MnO_x/ZSM-5 catalyst could be attributed to the higher concentration of Mn⁴⁺ and chemisorbed oxygen species and higher surface acidity. The improved SO₂ resistance was related to the catalyst’s hierarchical pore structure. Full article

Groundwater and soil pollution caused by (PAHs) spills, mostly from the oil industry and petrol stations in urban areas, represent a major environmental concern worldwide. However, infiltration into groundwater is decreasing due to the natural attenuation processes of PAHs in the vadose zone, which protect invaluable groundwater resources against contamination. This study was conducted to evaluate the effect of improper management of the petroleum industry on the groundwater and soil surrounding the petrol station and an oil refinery unit and, furthermore, to prepare the polluted risk intensity (PRI) map. Fifty-one soil samples and twenty-five water samples were analyzed for Light Non-aqueous Phase Liquid (LNAPLs), and one soil sample for Dense Non-Aqueous Phase Liquid (DNAPLs); furthermore, six soil samples analyzed for Tetraethyl Lead (TEL) analysis. The results showed that seventeen wells were polluted with LNAPLs and the soils were highly contaminated with different DNAPLs components and mainly was in the form of Polycyclic Aromatic Hydrocarbons (PAHs). Seven factors introduced to the GIS platform to produce PRI map, which is the distance to source, depth to water table, slope, lineaments, lithology, soil, and recharge rate. The final map revealed that the eastern and western parts of the study area are at a very high-risk level, whereas the center is at a very low to low-risk level. Full article