Search Results (11)

Freshwater resources that humans can use directly account for 2.5 percent. Fog collection from the atmosphere is an eco-friendly and potential solution to the water shortage crisis. This study presents a biomimetic approach to fog collection inspired by the Namib Desert beetle and cacti. Using fused deposition modeling (FDM) 3D printing and atmospheric pressure plasma (APP) treatment, we fabricated hybrid wettability surfaces combining hydrophobic polypropylene (PP) and super hydrophilic polycarbonate (PC). These surfaces significantly improved fog collection efficiency, achieving 366.2 g/m²/h rates by leveraging the Laplace pressure gradient and hybrid wettability gradient. This work provides an efficient and effective methodology to fabricate hybrid wetting surfaces and can be potentially applied to fog harvesting and microfluidic devices. Full article

Anti-fogging coatings/surfaces have attracted much attention lately because of their practical applications in a wide variety of engineering fields. In this study, we successfully developed transparent anti-fogging surfaces using a non-volatile and hygroscopic ionic liquid (IL), bis(hydroxyethyl)dimethylammonium methanesulfonate ([BHEDMA][MeSO₃]), with a high surface tension (HST, 66.4 mN/m). To prepare these surfaces, a layer of highly transparent, superhydrophilic silica (SiO₂) nano-frameworks (SNFs) was first prepared on a glass slide using candle soot particles and the subsequent chemisorption of tetraethoxysilane (TEOS). This particulate layer of SNFs was then used as the support for the preparation of the [BHEDMA][MeSO₃] layer. The resulting IL-infused SNF-covered glass slide was highly transparent, superhydrophilic, hygroscopic, and had self-healing and reasonable reversible/repeatable anti-fogging/frosting properties. This IL-infused sample surface kept its excellent anti-fogging performance in air for more than 8 weeks due to the IL’s non-volatile, HST, and hygroscopic nature. In addition, even if the water absorption limit of [BHEDMA][MeSO₃] was reached, the anti-fogging properties could be fully restored reversibly/repeatably by simply leaving the samples in air for several tens of minutes or heating them at 100 °C for a few minutes to remove the absorbed water. Our IL-based anti-fogging surfaces showed substantial improvement in their abilities to prevent fogging when compared to other dry/wet (super)hydrophobic/(super)hydrophilic surfaces having different surface geometries and chemistries. Full article

Infrared sensors capture infrared rays radiated by objects to form thermal images. They have a steady ability to penetrate smoke and fog, and are widely used in security monitoring, military, etc. However, civilian infrared detectors with lower resolution cannot compare with megapixel RGB camera sensors. In this paper, we propose a dynamic attention mechanism-based thermal image super-resolution network for infrared sensors. Specifically, the dynamic attention modules adaptively reweight the outputs of the attention and non-attention branches according to features at different depths of the network. The attention branch, which consists of channel- and pixel-wise attention blocks, is responsible for extracting the most informative features, while the non-attention branch is adopted as a supplement to extract the remaining ignored features. The dynamic weights block operates with 1D convolution instead of the full multi-layer perceptron on the global average pooled features, reducing parameters and enhancing information interaction between channels, and the same structure is adopted in the channel attention block. Qualitative and quantitative results on three testing datasets demonstrate that the proposed network can superior restore high-frequency details while improving the resolution of thermal images. And the lightweight structure of the proposed network with lower computing cost can be practically deployed on edge devices, effectively improving the imaging perception quality of infrared sensors. Full article

The antifogging coating based on super-hydrophilic polymer is regarded as the most promising strategy to avoid fogging but suffers from short-term effectiveness due to antifogging failure induced by water invasion. In this study, a black phosphorus nanosheets (BPs) hybrid polymer hetero-network coating (PUA/PAHS/BPs HN) was prepared by UV curing for the first time to achieve long-term antifogging performance. The polymer hetero-network (HN) structure was composed of two novel cross-linked acrylic resin and polyurethane acrylate. Different from physical blending, a covalent P-C bond between BPs and polymer is generated by UV initiated free radical reaction, resulting in BPs firmly embedded in the polymer HN structure. The BPs enriched on the coating surface by UV regulating migration prevent permeation of water towards the inside of the coating through its own good water-based lubricity and water absorption capacity. Compared with the nonhybrid polymer HN, PUA/PAHS/BPs HN not only has higher hardness and better friction resistance properties, but also exhibits superior water resistance and longer antifogging duration. Since water invasion was greatly reduced by BPs, the PUA/PAHS/BPs HN coating maintained antifogging duration for 60 min under a 60 °C water vapor test and still maintained long-term antifogging performance after being immersed in water for 5 days. Full article

In this study, we have developed a self-cleaning transparent coating on a glass substrate by dip coating a TiO₂ ̶ KH550 ̶ PEG mixed solution with super-hydrophilicity and good antifogging properties. The fabrication of the thin-film-coated glass is a one-step solution blending method that is performed by depositing only one layer of modified TiO₂ nanoparticles at room temperature. X-ray diffraction (XRD) and scanning electron microscopy (SEM) were used to determine the structure and morphology of the nanoparticles and the thin-film-coated glass. The surface functional groups were investigated using Fourier-transform infrared spectroscopy (FT-IR), and the optical properties of the glass coating were measured using a UV/Vis spectrometer. The results revealed that the KH-500-modified TiO₂ film coating was in an anatase crystalline form. The hydrophilicity of the coated and uncoated glass substrates was observed by measuring their water contact angle (WCA) using a contact angle instrument. The maximum transparency of the coated glass measured in the visible region (380–780 nm) was approximately 70%, and it possessed excellent super-hydrophilic properties (WCA ~0°) at an annealing temperature of 350 °C without further need of UV or plasma treatment. These results demonstrate the super-hydrophilic coated glass surface has potential for use in self-cleaning and anti-fogging applications. Full article

Inspired by nature, significant research efforts have been made to discover the diverse range of biomaterials for various biomedical applications such as drug development, disease diagnosis, biomedical testing, therapy, etc. Polymers as bioinspired materials with extreme wettable properties, such as superhydrophilic and superhydrophobic surfaces, have received considerable interest in the past due to their multiple applications in anti-fogging, anti-icing, self-cleaning, oil–water separation, biosensing, and effective transportation of water. Apart from the numerous technological applications for extreme wetting and self-cleaning products, recently, super-wettable surfaces based on polymeric materials have also emerged as excellent candidates in studying biological processes. In this review, we systematically illustrate the designing and processing of artificial, super-wettable surfaces by using different polymeric materials for a variety of biomedical applications including tissue engineering, drug/gene delivery, molecular recognition, and diagnosis. Special attention has been paid to applications concerning the identification, control, and analysis of exceedingly small molecular amounts and applications permitting high cell and biomaterial cell screening. Current outlook and future prospects are also provided. Full article

In this paper, we propose an optimization framework of vehicular fog computing and a cooperation vehicular network model. We aim to improve the performance of vehicular fog computing and solve the problem that the data of the vehicle collaborative network is difficult to obtain. This paper applies the hypergraph theory to study the underlying structure, considering the social characteristics of the vehicles and vehicle communication. Since the vehicles join the network in accordance with the Poisson process law, the model is analyzed by using Poisson stochastic process and mean field theory. This paper uses MATLAB to simulate the evolution process of cooperative networks. The results show that the vehicle’s super-degree in vehicular fog computing has scale-free characteristics. Through this model, the vehicle cooperation situation can be analyzed, and the vehicle dynamics can be accurately predicted to further improve the performance of vehicular fog computing. The model can be transformed into some complex network models by adjusting the parameters. It has strong universality and has certain reference significance for the research on the related characteristics of VANETs and the theoretical research of the cooperative network. Full article

Vehicular sensor networks (VSNs) have emerged as a paradigm for improving traffic safety in urban cities. However, there are still several issues with VSNs. Vehicles equipped with sensing devices usually upload large amounts of data reports to a remote cloud center for processing and analyzing, causing heavy computation and communication costs. Additionally, to choose an optimal route, it is required for vehicles to query the remote cloud center to obtain road conditions of the potential moving route, leading to an increased communication delay and leakage of location privacy. To solve these problems, this paper proposes an efficient privacy-preserving data sharing (EP ${}^2$ DS) scheme for fog-assisted vehicular sensor networks. Specifically, the proposed scheme utilizes fog computing to provide local data sharing with low latency; furthermore, it exploits a super-increasing sequence to format the sensing data of different road segments into one report, thus saving on the resources of communication and computation. In addition, using the modified oblivious transfer technology, the proposed scheme can query the road conditions of the potential moving route without disclosing the query location. Finally, an analysis of security suggests that the proposed scheme can satisfy all the requirements for security and privacy, with the evaluation results indicating that the proposed scheme leads to low costs in computation and communication. Full article

Weather is an important factor that determines smoke development, which is essential information for planning smoke field measurements. This study identifies the synoptic systems that would favor to produce the desired smoke plumes for the Fire and Smoke Model Evaluation Experiment (FASMEE). Daysmoke and PB-Piedmont (PB-P) models are used to simulate smoke plume evolution during the day time and smoke drainage and fog formation during the nighttime for hypothetical prescribed burns on 5–8 February 2011 at the Stewart Army Base in the southeastern United States. Daysmoke simulation is evaluated using the measured smoke plume heights of two historical prescribed burns at the Eglin Air Force Base. The simulation results of the hypothetical prescribed burns show that the smoke plume is not fully developed with low plume height during the daytime on 5 February when the burn site is under the warm, moist, and windy conditions connected to a shallow cyclonic system and a cold front. However, smoke drainage and fog are formed during the nighttime. Well-developed smoke plumes, which rise mainly vertically, extend to a majority portion of the planetary boundary layer, and have steady clear boundaries, appear on both 6 and 7 February when the air is cool but dry and calm during a transition between two low-pressure systems. The plume rises higher on the second day, mainly due to lighter winds. The smoke on 8 February shows a loose structure of large horizontal dispersion and low height after passage of a deep low-pressure system with strong cool and dry winds. Smoke drainage and fog formation are rare for the nights during 5–8 February. It is concluded that prescribed burns conducted during a period between two low-pressure systems would likely generate the desired plumes for FASMEE measurement during daytime. Meanwhile, as the fire smolders into the night, the burns would likely lead to fog formation when the burn site is located in the warm and moist section of a low-pressure system or a cold front. Full article

Shot peening is a surface process commonly used in the aeronautic and automotive industries to improve fatigue resistance. Shot peening is proven to be beneficial in the fatigue behavior of components, but rarely has its influence on wear and pitting corrosion resistance been evaluated. In this work, shot peening was performed on AISI F55-UNS S32760 super-duplex stainless steel samples previously submitted to various thermal treatments, to obtain different initial microstructures and properties. Samples have been characterized in terms of microstructure morphology, local chemical composition, microhardness of each constituent phase, and energy dissipation modes. The enhanced properties provided by shot peening has been evaluated through residual stress depth profiles and Full Width at Half Maximum (FWHM) using X-ray diffraction (XRD), surface hardness, surface roughness, and corrosion resistance through salt spray fog tests. The 1400 °C solution thermal treatment was identified as the optimum initial condition, which maximizes the advantages of the shot peening treatment, even pitting corrosion resistance. These results are related to the uniformity of austenite and ferrite in terms of microstructure morphology, micromechanical properties, and alloying elements distribution. Full article

TiO₂ sol was produced by the sol-gel method through the hydrolysis and the aging of tetrabutyl titanate and the TiO₂ film was obtained by dipping and uniform lifting of the acid-treated and ultrasound-treated clean glass slides into the TiO₂ sol followed by aging, drying, and calcination. The effect of the hydrolysis control agents to the formed sol was researched and the crystalline state, the morphology, and the photocatalytic properties of the products after calcination were characterized. The structural morphology, the contact angles before and after illumination, and the self-cleaning properties of the TiO₂ film were characterized as well. The results showed that by using acetylacetone as the hydrolysis control agent, the formed TiO₂ sol had relatively high stability. The product after the calcination of the TiO₂ sol was of single anatase type with crystalline size of 18–20 nm and it could degrade nearly 100% of methylene blue after 90 min illumination. The formed TiO₂ film is compact, continuous, smooth, and had the properties of super-hydrophilicity (after 30 min illumination due to its contact angle decreasing from 21° to nearly 0°) and anti-fogging capability, which indicated its excellent self-cleaning property. Full article