Search Results (842)

In this study, a novel comparison between single phase 7-Level Packed U—Cell (PUC) inverter and single phase 9-Level Cross Switches Cell (CSC) inverter with Model Predictive Controller (MPC) for solar grid-tied applications is presented. Our innovation introduces a unique approach by integrating PV solar panels in PUC and CSC inverters in their two DC links rather than just one which increases power density of the system. Another key benefit for the proposed models lies in their simplified design, offering improved power quality and reduced complexity relative to traditional configurations. Moreover, both models feature streamlined control architectures that eliminate the need for additional controllers such as PI controllers for grid reference current extraction. Furthermore, the implementation of Maximum Power Point Tracking (MPPT) technology directly optimizes power output from the PV panels, negating the necessity for a DC-DC booster converter during integration. To validate the proposed concept’s performance for both inverters, extensive simulations were conducted using MATLAB/Simulink, assessing both inverters under steady-state conditions as well as various disturbances to evaluate its robustness and dynamic response. Both inverters exhibit robustness against variations in grid voltage, phase shift, and irradiation. By comparing both inverters, results demonstrate that the CSC inverter exhibits superior performance due to its booster feature which relies on generating voltage level greater than the DC input source. This primary advantage makes CSC a booster inverter. Full article

This study presents the development and validation of a high-efficiency optical interface designed for ultra-high-concentration photovoltaic (UHCPV) systems, with a focus on enabling clean and sustainable solar energy conversion. A Fresnel lens serves as the primary optical concentrator in a novel system architecture that integrates advanced optical design with system-level thermal management. The proposed modeling framework combines detailed 3D ray tracing with coupled thermal simulations to accurately predict key performance metrics, including optical concentration ratios, thermal loads, and component temperature distributions. Validation against theoretical and experimental benchmarks demonstrates high predictive accuracies within 1% for optical efficiency and 2.18% for thermal performance. The results identify critical thermal thresholds for long-term operational stability, such as limiting mirror temperatures to below 52 °C and photovoltaic cell temperatures to below 130 °C. The model achieves up to 89.08% optical efficiency, with concentration ratios ranging from 240 to 600 suns and corresponding focal spot temperatures between 37.2 °C and 61.7 °C. Experimental benchmarking confirmed reliable performance, with the measured results closely matching the simulations. These findings highlight the originality of the coupled optical–thermal approach and its applicability to concentrated photovoltaic design and deployment. This integrated design and analysis approach supports the development of scalable, clean photovoltaic technologies and provides actionable insights for real-world deployment of UHCPV systems with minimal environmental impact. Full article

Accurate parameter estimation of solar cells is critical for early-stage fault diagnosis in photovoltaic (PV) power systems. A physical model based on three-diode configuration has been recently introduced to improve model accuracy. However, nonlinear and recursive relationships between internal parameters and PV output, along with parameter drift and PV degradation due to long-term operation, pose significant challenges. To address these issues, this study proposes a deep learning-based ensemble framework that integrates outputs from multiple optimization algorithms to improve estimation precision and robustness. The proposed method consists of three stages. First, the collected data were preprocessed using some data processing techniques. Second, a PV power generation system is modeled using the three-diode structure. Third, several optimization algorithms with distinct search behaviors are employed to produce diverse estimations. Finally, a hybrid deep learning model combining convolutional neural networks (CNNs) and long short-term memory (LSTM) networks is used to learn from these results. Experimental validation on a 733 kW PV power generation system demonstrates that the proposed method outperforms individual optimization approaches in terms of prediction accuracy and stability. Full article

Perovskites (ABX₃) exhibit remarkable potential in optoelectronic conversion, catalysis, and diverse energy-related fields. However, the tunability of A, B, and X-site compositions renders conventional screening methods labor-intensive and inefficient. This review systematically synthesizes the roles of physical simulations and machine learning (ML) in accelerating perovskite discovery. By harnessing existing experimental datasets and high-throughput computational results, ML models elucidate structure-property relationships and predict performance metrics for solar cells, (photo)electrocatalysts, oxygen carriers, and energy-storage materials, with experimental validation confirming their predictive reliability. While data scarcity and heterogeneity inherently limit ML-based prediction of material property, integrating high-throughput computational methods as external mechanistic constraints—supplementing standardized, large-scale training data and imposing loss penalties—can improve accuracy and efficiency in bandgap prediction and defect engineering. Moreover, although embedding high-throughput simulations into ML architectures remains nascent, physics-embedded approaches (e.g., symmetry-aware networks) show increasing promise for enhancing physical consistency. This dual-driven paradigm, integrating data and physics, provides a versatile framework for perovskite design, achieving both high predictive accuracy and interpretability—key milestones toward a rational design strategy for functional materials discovery. Full article

This article proposes an Energy Management System (EMS) for smart microgrids with a decentralized multi-agent system (MAS) based on a bio-inspired T-Cell optimization algorithm. The proposed system allows real-time control and dynamic balancing of loads while addressing the challenges of intermittent renewable energy sources like solar and wind. The system operates within the tertiary control layer; the optimal set points are computed by the T-Cell algorithm across energy sources and storage units. The set points are implemented and validated in real-time by the OPAL-RT simulation platform. The system contains a real-time feedback loop, which continuously monitors voltage levels and system performance, allowing the system to readjust in case of anomalies or power imbalances. Contrary to classical methods like Model Predictive Control (MPC) or Particle Swarm Optimization (PSO), the T-Cell algorithm demonstrates greater robustness to uncertainty and better adaptability to dynamic operating conditions. The MAS is implemented over the JADE platform, enabling decentralized coordination, autonomous response to disturbances, and continuous system optimization to ensure stability and reduce reliance on the main grid. The results demonstrate the system’s effectiveness in maintaining the voltages within acceptable limits of regulation (±5%), reducing reliance on the main grid, and optimizing the integration of renewable sources. The real-time closed-loop solution provides a scalable and reliable microgrid energy management solution under real-world constraints. Full article

Amidst the global energy structure transition and intensification of climate warming, the temperature control targets of the Paris Agreement and China’s “dual carbon” goals have driven the rapid development of building-integrated photovoltaics (BIPVs). However, solar cells in BIPV systems may produce exhaust gases that affect local urban air quality if exposed to extreme environmental conditions such as high temperatures during operation. In this study, eight air quality monitoring points were established around the BIPV system at Shenyang Jianzhu University as the experimental group, along with one additional air quality monitoring point serving as a control group. The concentrations of four air pollutant indicators (PM_2.5, PM₁₀, SO₂, and NO₂) were monitored continuously for 14 days. The weight of each indicator was calculated using the principle of information entropy, and the air quality evaluation grades were determined by combining the homomorphic inverse correlation function. The Entropy-Weighted Set Pair Analysis model was applied to evaluate the air quality of the BIPV system at Shenyang Jianzhu University. The results indicated that due to the high concentrations of SO₂ and NO₂, the Air Quality Index (AQI) grade at Shenyang Jianzhu University was classified as “light pollution.” Corresponding recommendations were proposed to promote the sustainable development of urban BIPV. Simultaneously, the evaluation results of the Entropy-Weighted Set Pair Analysis model were similar to those obtained using other methods, demonstrating the feasibility of this evaluation model for assessing the impact on air quality. Full article

The role of green and low-carbon energy (gLE) resources in realizing the envisaged future decarbonized energy generation and supply cannot be overemphasized. The world has witnessed growing attention to the application of green energy (gE) sources such as solar, wind, hydro, geothermal, and biomass (energy crops, biogas, biodiesel, etc.). There is also the existence of low-carbon energy (LE) resources such as power-to-X, power-to-fuel, power-to-gas, e-fuel, waste-to-energy, etc., which possess huge potential for delivering sustainable energy, thus facilitating a pathway for achieving the desired environmental sustainability. In addition, the evolution of the cyber-physical power systems and the need for strengthening capacity in advanced energy materials are among the key factors that drive the deployment of gLE technologies around the world. This paper, therefore, presents the recent global developments in gLE resources, including the trends in their deployments for different applications in commercial premises. The study introduces different conceptual technical models and configurations of energy systems; the potential of multi-energy generation in a microgrid (m-grd) based on the gLE resources is also explored using the System Advisor Model (SAM) software. The m-grd is being fueled by solar, wind, and fuel cell resources for supplying a commercial load. The quantity of carbon emissions avoided by the m-grd is evaluated compared to a purely conventional m-grd system. The paper presents the cost of energy and the net present cost of the proposed m-grid; it also discusses the relevance of carbon capture and storage and carbon sequestration technologies. The paper provides deeper insights into the understanding of clean and unconventional energy resources. Full article

Perovskite solar cells (PSCs) have emerged as promising photovoltaic technologies owing to their high power conversion efficiency (PCE) and material versatility. Conventional optimization of PSC architectures largely depends on iterative experimental approaches, which are often labor-intensive and time-consuming. In this study, a data-driven modeling strategy is introduced to accelerate the design of efficient and mechanically robust PSCs. Seven supervised regression models were evaluated for predicting key photovoltaic parameters, including PCE, short-circuit current density (Jsc), open-circuit voltage (Voc), and fill factor (FF). Among these, a stacking ensemble framework exhibited superior predictive accuracy, achieving an R² of 0.8577 and a root mean square error of 2.084 for PCE prediction. Model interpretability was ensured through Shapley Additive exPlanations(SHAP) analysis, which identified precursor solvent composition, A-site cation ratio, and hole-transport-layer additives as the most influential parameters. Guided by these insights, ten device configurations were fabricated, achieving a maximum PCE of 24.9%, in close agreement with model forecasts. Furthermore, multiscale mechanical assessments, including bending, compression, impact resistance, peeling adhesion, and nanoindentation tests, were conducted to evaluate structural reliability. The optimized device demonstrated enhanced interfacial stability and fracture resistance, validating the proposed predictive–experimental framework. This work establishes a comprehensive approach for performance-oriented and reliability-driven PSC design, providing a foundation for scalable and durable photovoltaic technologies. Full article

The dye-sensitized solar cell (DSSC) is a promising candidate, offering an attractive substitute for conventional silicon-based photovoltaic technologies. The performance advantages of the DSSC have led to a surge in research activity reflected in the number of publications over the years. To deliver data-driven analysis of DSSC performance, machine learning models have been applied. As a first step, a literature-based database has been developed and after the data preprocesses, Decision Tree (DT), Random Forest (RF), K-Nearest Neighbors (KNN), Support Vector Machine (SVM), xgboost (XGB), and Artificial Neural Network (ANN) algorithms were applied with stratified train-test splits. The performance of the models has been assessed via metrics, and the model interpretability relied on SHAP analysis. Based on the employed metrics and the confusion matrix, DT, RF, and KNN are the most accurate models for predicting DSSC efficiency on the developed dataset. Furthermore, it was revealed that synthesis temperature and the thickness of thin film were identified as the dominant drivers, followed by precursor and dye. Mid-tier contributors were morphological structure, electrolyte concentrations, and the absorption maximum. The results suggest that in optimizing the manufacturing process, targeted tuning of the synthesis temperature, the thickness of thin film, the precursor, and the dye are likely to improve the performance of the device. Therefore, experimental effort should concentrate on these factors. Full article

To effectively address the issues of curtailed wind and photovoltaic (PV) power caused by the high proportion of renewable energy integration and to promote the clean and low-carbon transformation of the energy system, this paper proposes a “chemical–mechanical” dual-pathway synergistic mechanism for the reversible solid oxide cell (RSOC) and flywheel energy storage system (FESS) electricity–hydrogen hybrid system. This mechanism aims to address both short-term and long-term energy storage fluctuations, thereby minimizing economic costs and curtailed wind and PV power. This synergistic mechanism is applied to regulate system operations under varying wind and PV power output and electricity–hydrogen load fluctuations across different seasons, thereby enhancing the power generation system’s ability to integrate wind and PV energy. An economic operation model is then established with the objective of minimizing the economic costs of the electricity–hydrogen hybrid system incorporating RSOC and FESS. Finally, taking a large-scale new energy industrial park in the northwest region as an example, case studies of different schemes were conducted on the MATLAB platform. Simulation results demonstrate that the reversible solid oxide cell (RSOC) system—integrated with a FESS and operating under the dual-path coordination mechanism—achieves a 14.32% reduction in wind and solar curtailment costs and a 1.16% decrease in total system costs. Furthermore, this hybrid system exhibits excellent adaptability to the dynamic fluctuations in electricity–hydrogen energy demand, which is accompanied by a 5.41% reduction in the output of gas turbine units. Notably, it also maintains strong adaptability under extreme weather conditions, with particular effectiveness in scenarios characterized by PV power shortage. Full article

A novel, eco-friendly perovskite solar cell design is investigated using numerical simulations based on the finite-difference time-domain (FDTD) method. The proposed structure incorporates a two-dimensional (2D) photonic crystal (PhC) architecture featuring a titanium dioxide (TiO₂) cylindrical electron extraction layer. To reduce fabrication complexity and overall production costs, a hole-transport-layer-free (HTL-free) configuration is employed. Simulation results reveal a significant enhancement in photovoltaic performance compared to conventional planar structures, achieving an ultimate efficiency of 42.3%, compared to 36.6% for the traditional design—an improvement of over 16%. Electromagnetic field distributions are analyzed to elucidate the physical mechanisms behind the enhanced absorption. The improved optical performance is attributed to strong coupling between photonic modes and surface plasmon polaritons (SPPs), which enhances light–matter interaction. Furthermore, the device exhibits polarization-insensitive and angle-independent absorption characteristics, maintaining high performance for both transverse magnetic (TM) and transverse electric (TE) polarizations at incidence angles up to 60°. These findings highlight a promising pathway toward the development of cost-effective, lead-free perovskite solar cells with high efficiency and simplified fabrication processes. Full article

This study investigates the integration of green hydrogen into building energy systems using local solar power, with the electricity grid serving as a backup plan. A comprehensive bottom-up analysis compares six energy system configurations: the natural gas grid boiler system, all-electric heat pump system, natural gas and hydrogen blended system, hydrogen microgrid boiler system, cogeneration hydrogen fuel cell system, and hybrid hydrogen heat pump system. Energy efficiency evaluations were conducted for 25 homes within one block in a neighborhood across five typological house stocks located in Stoke-on-Trent, UK. This research was modeled using a spreadsheet-based approach. The results highlight that while the all-electric heat pump system still demonstrates the highest energy efficiency with the lowest consumption, the hybrid hydrogen heat pump system emerges as the most efficient hydrogen-based solution. Further optimization, through the implementation of a peak-shaving strategy, shows promise in enhancing system performance. In this approach, hybrid hydrogen serves as a heating source during peak demand hours (evenings and cold seasons), complemented by a solar energy powered heat pump during summer and daytime. An hourly operational configuration is recommended to ensure consistent performance and sustainability. This study focuses on energy performance, excluding cost-effectiveness analysis. Therefore, the cost of the energy is not taken into consideration, requiring further development for future research in these areas. Full article

This research proposes a novel multi-objective optimization framework for virtual power plants (VPPs) operating in day-ahead electricity markets. The VPP integrates diverse distributed energy resources (DERs) such as wind turbines, solar photovoltaics (PV), fuel cells (FCs), combined heat and power (CHP) systems, and microturbines (MTs), along with demand response (DR) programs and energy storage systems (ESSs). The trading model is designed to optimize the VPP’s participation in the day-ahead market by aggregating these resources to function as a single entity, thereby improving market efficiency and resource utilization. The optimization framework simultaneously minimizes operational costs, maximizes system flexibility, and enhances reliability, addressing challenges posed by renewable energy integration and market uncertainties. A new flexibility index is introduced, incorporating both the technical and economic factors of individual units within the VPP, offering a comprehensive measure of system adaptability. The model is validated on IEEE 24-bus and 118-bus systems using evolutionary algorithms, achieving significant improvements in flexibility (20% increase), cost reduction (15%), and reliability (a 30% reduction in unsupplied energy). This study advances the development of efficient and resilient power systems amid growing renewable energy penetration. Full article

This study presents a machine-learning framework for predicting spectral solar irradiance from 300 to 1100 nm using the random forest and neural network models. Two approaches were compared: one using the real aerosol optical depth at discrete wavelengths and the other using the synthetic aerosol optical depth derived from the Ångström exponent. The models were trained on atmospheric variables and were validated against high-resolution spectroradiometer data from the Korea Institute of Energy Research. The models based on the synthetic aerosol optical depth outperformed real-data models in terms of accuracy, bias, and variance explained (γ² = 0.979 vs. 0.967). These models also provide more reliable estimates of the spectral mismatch factor across the diverse photovoltaic technologies. The copper indium gallium diselenide and mono-crystalline silicon cells showed a high spectral mismatch factor stability, whereas Perovskite cells exhibited a greater sensitivity to spectral variations. Full article

This paper presents the optimal design and cost–benefit analysis of an off-grid solar photovoltaic system integrated with a hybrid energy storage system for a Category 3 rural healthcare facility in Elands Bay, South Africa. The optimal configuration, designed in Homer Pro, consists of a 16.1 kW solar PV array, 10 kW lithium-ion battery, 23 supercapacitor strings (2 modules per string), 50 kW fuel cell, 50 kW electrolyzer, 20 kg hydrogen tank, and 10.8 kW power converter. The daily energy consumption for the selected healthcare facility is 44.82 kWh, and peak demand is 9.352 kW. The off-grid system achieves 100% reliability (zero unmet load) and zero CO₂ emissions, compared to the 24,128 kg/year of CO₂ emissions produced by the diesel generator. Economically, it demonstrates strong competitiveness with a levelized cost of energy (LCOE) of ZAR24.35/kWh and a net present cost (NPC) of ZAR6.05 million. Sensitivity analysis reveals the potential for a further 20–40% reduction in LCOE by 2030 through anticipated declines in component costs. Hence, it is established that the proposed model is a reliable and viable option for off-grid rural healthcare facilities. Full article