Search Results (74)

The Union of the Comoros, located in the Indian Ocean, faces persistent energy challenges due to its geographic isolation, heavy dependence on imported fossil fuels, and underdeveloped electricity infrastructure. This study investigates the techno-economic optimization of a hybrid microgrid designed to supply electricity to a rural village in Grande Comore. The proposed system integrates photovoltaic (PV) panels, wind turbines, a diesel generator, and battery storage. Detailed modeling and simulation were conducted using HOMER Energy, accompanied by a sensitivity analysis on solar irradiance, wind speed, and diesel price. The results indicate that the optimal configuration consists solely of PV and battery storage, meeting 100% of the annual electricity demand with a competitive levelized cost of energy (LCOE) of 0.563 USD/kWh and zero greenhouse gas emissions. Solar PV contributes over 99% of the total energy production, while wind and diesel components remain unused under optimal conditions. Furthermore, the system generates a substantial energy surplus of 63.7%, which could be leveraged for community applications such as water pumping, public lighting, or future system expansion. This study highlights the technical viability, economic competitiveness, and environmental sustainability of 100% solar microgrids for non-interconnected island territories. The approach provides a practical and replicable decision-support framework for decentralized energy planning in remote and vulnerable regions. Full article

Global building energy consumption is significantly increasing. Utilizing renewable energy sources may be an effective approach to achieving low-carbon and energy-efficient buildings. A combined system incorporating solar photovoltaic–thermal (PV/T) components with an air-source heat pump (ASHP) was studied for simultaneous heating and power generation in a real residential building. The back panel of the PV/T component featured a novel polygonal Freon circulation channel design. A prototype of the combined heating and power supply system was constructed and tested in Fuzhou City, China. The results indicate that the average coefficient of performance (COP) of the system is 4.66 when the ASHP operates independently. When the PV/T component is integrated with the ASHP, the average COP increases to 5.37. On sunny days, the daily average thermal output of 32 PV/T components reaches 24 kW, while the daily average electricity generation is 64 kW·h. On cloudy days, the average daily power generation is 15.6 kW·h; however, the residual power stored in the battery from the previous day could be utilized to ensure the energy demand in the system. Compared to conventional photovoltaic (PV) systems, the overall energy utilization efficiency improves from 5.68% to 17.76%. The hot water temperature stored in the tank can reach 46.8 °C, satisfying typical household hot water requirements. In comparison to standard PV modules, the system achieves an average cooling efficiency of 45.02%. The variation rate of the system’s thermal loss coefficient is relatively low at 5.07%. The optimal water tank capacity for the system is determined to be 450 L. This system demonstrates significant potential for providing efficient combined heat and power supply for buildings, offering considerable economic and environmental benefits, thereby serving as a reference for the future development of low-carbon and energy-saving building technologies. Full article

Improving photovoltaic (PV) panel performance under extreme climatic conditions is critical for advancing sustainable energy systems. In hyper-arid regions, elevated operating temperatures significantly reduce panel efficiency. This study investigates and compares three cooling techniques—air cooling, water cooling, and porous media cooling—using thermal and electrical modeling based on CFD simulations in ANSYS. The numerical model replicates a PV system operating under peak solar irradiance (900 W/m²) and realistic ambient conditions in Adrar, Algeria. Simulation results show that air cooling leads to a modest temperature reduction of 6 °C and a marginal efficiency gain of 0.25%. Water cooling, employing a top-down laminar flow, reduces cell temperature by over 35 °C and improves net electrical output by 30.9%, despite pump energy consumption. Porous media cooling, leveraging passive evaporation through gravel, decreases panel temperature by around 30 °C and achieves a net output gain of 26.3%. Mesh sensitivity and validation against experimental data support the accuracy of the model. These findings highlight the significant potential of water and porous material cooling strategies to enhance PV performance in hyper-arid environments. The study also demonstrates that porous media can deliver high thermal effectiveness with minimal energy input, making it a suitable low-cost option for off-grid applications. Future work will integrate long-term climate data, real diffuser geometries, and experimental validation to further refine these models. Full article

Solar-powered pumping systems using series pumps are commonly applied in the delivery of water to remote agricultural regions, particularly in hilly tropical terrain. The synchronization of these pumps typically depends on reliable communication; however, dense vegetation, elevation changes, and weather conditions often disrupt signals. To address these limitations, a fully decentralized, communication-free control system is proposed. Each pumping station operates independently while maintaining synchronized operation through emulated neighbor sensing. The system applies a discrete-time control algorithm with virtual sensing that estimates neighboring pump statuses. Each station consists of a solar photovoltaic (PV) array, variable-speed drive, variable inlet valve, reserve tank, and local control unit. The controller adjusts the valve positions and pump power based on real-time water level measurements and virtual neighbor sensing. The simulation results across four scenarios, including clear sky, cloudy conditions, temporary outage, and varied irradiance, demonstrated steady-state operation with no water overflow or shortage and a steady-state error less than 4% for 3 m³ transfer. The error decreased as the average power increased. The proposed method maintained system functionality under simulated power outage and variable irradiance, confirming its suitability for remote agricultural areas where communication infrastructure is limited. Full article

This study investigates the relative benefits of solar thermal (ST) and photovoltaic (PV) systems integrated with air-source heat pumps for domestic hot water production in newly built residential buildings. Using calibrated DesignBuilder simulations of “The Future Home” located in Energy House 2.0, an environmental chamber, the study analyzes energy performance and carbon emissions for eight scenarios: (1) baseline heat pump only, (2) heat pump with 4 m² PV panels, (3) heat pump with 4 m² ST panels, (4) heat pump with 2 m² PV + 2 m² ST panels, and (5–8) variants with increased hot water demand. While ST systems directly heat water through thermal energy transfer, PV systems contribute to water heating indirectly by providing electricity to power the heat pump. The results show that the ST system provides 964.6 kWh of thermal energy annually, increasing to 1528 kWh with enhanced hot water demand, while a similarly sized PV system generates 532.5 kWh of electricity. The research reveals that Standard Assessment Procedure methodology’s fixed hot water demand assumptions could significantly underpredict solar thermal benefits, potentially discouraging UK house builders from adopting this technology. Full article

Photovoltaic (PV) systems are at the heart of the energy transition, providing an essential source of clean, renewable energy for applications such as solar pumping, which is essential for irrigation and rural water supply. However, their efficiency depends directly on the quality and performance of the modules, which are often affected by defects or unfavorable environmental conditions. This article presents the development of an innovative automated tool designed for advanced characterization of PV modules by analyzing key parameters such as voltage and current. The system integrates measurement sensors (voltage, current, temperature, etc.), an Arduino Mega board and an SD card, enabling real-time data collection, processing, and recording under various environmental conditions. The results of the experimental tests demonstrate a significant improvement in the PV panel selection process, ensuring optimized choices at the time of purchase and rigorous monitoring during operation. This innovation contributes to maximizing energy performance and extending panel longevity, reinforcing their role in the transition to a sustainable energy model. Full article

This study introduces a novel method for controlling an autonomous photovoltaic pumping system by integrating a Maximum Power Point Tracking (MPPT) control scheme with variable structure Sliding Mode Control (SMC) alongside Perturb and Observe (P&O) algorithms. The stability of the proposed SMC method is rigorously analyzed using Lyapunov’s theory. Through simulation-based comparisons, the efficacy of the SMC controller is demonstrated against traditional P&O methods. Additionally, the SMC-based system is experimentally implemented in real time using dSPACE DSP1104, showcasing its robustness in the presence of internal and external disturbances. Robustness tests reveal that the SMC controller effectively tracks Maximum Power Points (MMPs) despite significant variations in load and solar irradiation, maintaining optimal performance even under challenging conditions. The results indicate that the SMC system can achieve up to a 70% increase in water flow rates compared with systems without MPPT controllers. Furthermore, SMC demonstrated high sensitivity to sudden changes in environmental conditions, ensuring efficient power extraction from the photovoltaic panels. This study highlights the advantages of integrating SMC into Photovoltaic Water Pumping Systems (PV-WPSs), providing enhanced control capabilities and optimizing system performance. The findings contribute to the development of sustainable water supply solutions, particularly in remote areas with limited access to the electrical grid. Full article

PV technology has become widespread in the Netherlands, reaching a cumulative installed capacity of 22.4 GWp in 2023 and ranking second in the world for solar PV per capita at 1268 W/capita. Despite this growth, there is an inherent discrepancy between energy supply and demand during the day. While the netting system in the Netherlands can currently negate the economic drawbacks of this discrepancy, grid congestion and imbalanced electricity prices show that improvements are highly desirable for the sustainability of electricity grids. This research analyzes the effectiveness of a Power-to-Domestic-Hot-Water (P2DHW) system at improving the utilization of excess PV electricity in Dutch households and compares it to similar technologies. The results show that the example P2DHW system, the WaterAccu, compares favorably as a low cost and flexible solution. In particular, for twelve different households differing in size (1–6 occupants), PV capacity (2.4–8 kWp), and size of hot water storage boiler (50–300 L), it is shown that the total economic benefits for the period 2024–2032 vary from −€13 to €3055, assuming the current net metering scheme is abolished in 2027. Only for large households with low PV capacity are the benefits a little negative. Based on a multi-criteria analysis, it is found that the WaterAccu is the cheapest option compared to other storage options, such as a home battery, a heat pump boiler, and a solar boiler. A sensitivity study demonstrated that these results are overall robust. Furthermore, the WaterAccu has a positive societal impact owing to its peak shaving potential. Further research should focus on the potential of the technology to decrease grid congestion when implemented on a neighborhood scale. Full article

A photovoltaic thermal panel (PV/T) is an integrated module that harnesses both photovoltaic and solar thermal technologies to convert solar energy into electricity and heat, thereby enhancing overall energy efficiency. This paper aims to explore the suitability of PV/T solar heat pump systems across various climate zones and assess their potential for widespread application. By analyzing the operating principles of an indirect expansion PV/T solar heat pump system in conjunction with the climate characteristics of different regions, MATLAB R2019b/Simulink software was employed to evaluate the photoelectric performance of PV and PV/T systems in representative cities across five distinct climate zones in China during typical winter days. Key metrics, such as power generation, hot water storage tank temperature, indoor temperature, and system COP, were chosen to assess the heating performance of the PV/T solar heat pump system. The findings indicate that the winter ambient temperature significantly affects the photoelectric efficiency of both the PV and PV/T systems. While higher latitudes with lower ambient temperatures yield greater photoelectric efficiency, the southern regions exhibit higher power generation during winter. The winter heating effectiveness of the PV/T solar heat pump system is mainly influenced by indoor and water tank temperatures, with Harbin’s system performing the poorest and failing to meet heating demands, whereas Nanjing’s system shows the best results. Full article

This study investigates three methods for sizing behind-the-meter (BTM) solar PV systems for pumped water distribution networks (WDNs). The three methods are (1) the industry method based on current industry practices, (2) the minimum total life cycle cost (TLCC) method to minimize TLCC through the life of solar PV systems, and (3) the minimum payback method to minimize the time to pay off the capital investment in solar PV systems. The industry method risks over-sizing, while the minimum payback method risks under-sizing. The minimum TLCC method leads to systems with balanced performance. The findings offer decision-makers insights when selecting solar PV systems for WDNs. Full article

This paper presents the results of the technical validation of an innovative prototype for drying alfalfa bales. It is based on a 4.1 kW Heat Pump (HP) that uses an advanced technology (optimized for extracting the humidity from the air) and is directly powered by a 6.6 kW_p PV generator without grid or batteries support. The main technical challenges of this work were managing solar irradiance fluctuations due to cloud-passing and achieving good drying efficiency. The prototype has been validated for two consecutive drying campaigns in La Rioja (Spain). There were no abrupt stops generated by cloud-passing. The PR_PV, which evaluates the performance of the PV system only during the periods when the PV energy can be used by the HP unit, presented values of 0.82 and 0.85, comparable to a well-performing grid-connected PV system. Although the bales’ initial relative humidity (RH) ranged from 18 to 30%, all but one of them presented a final RH below 16%, which is the limit point to avoid fermentation. The drying times ranged from 1 to 5 h, and the specific energy consumption per liter of water extracted, from 0.7 to 1.46 kWh/L. These values are comparable to traditional diesel and grid-powered systems. It is worth noting that the agricultural drying market represented USD 1.7 billion in 2023. Full article

A new methodology for hybrid energy systems (HESs) was developed, namely the HY4RES model, tailored for the water sector, covering hybrid energy objective functions and grid or battery support using optimization algorithms in Solver, MATLAB, and Python, with evolutionary methods. HOMER is used for hybrid microgrids and allows for comparison with HY4RES, the newly developed model. Both models demonstrated flexibility in optimizing hybrid renewable solutions. This study analyzed an irrigation system for 3000 m³/ha (without renewables (Base case) and the Proposed system—with PV solar and pumped-hydropower storage to maximize cash flow over 25 years). Case 1—3000 m³/ha presented benefits due to PV supplying ~87% of energy, reducing grid dependency to ~13%. Pumped-hydropower storage (PHS) charges with excess solar energy, ensuring 24 h irrigation. Sensitivity analyses for Case 2—1000—and Case 3—6000 m³/ha—highlighted the advantages and limitations of water-energy management and system optimization. Case 2 was the most economical due to lower water-energy needs with noteworthy energy sales (~73.4%) and no need for the grid. Case 3 led to increased operating costs relying heavily on grid energy (61%), with PV providing only 39%. PHS significantly lowered operating costs and enhanced system flexibility by selling excess energy to the grid. Full article

Local indoor farming plays a significant role in the sustainable food production sector. The operation and energy costs, however, have led to bankruptcy and difficulties in cost management of indoor farming operations. To control the volatility and reduce the electricity costs for indoor farming, the agrivoltaics agrotunnel introduced here uses: (1) high insulation for a building dedicated to vertical growing, (2) high-efficiency light emitting diode (LED) lighting, (3) heat pumps (HPs), and (4) solar photovoltaics (PVs) to provide known electric costs for 25 years. In order to size the PV array, this study develops a thermal model for agrotunnel load calculations and validates it using the Hourly Analysis Program and measured data so the effect of plant evapotranspiration can be included. HPs are sized and plug loads (i.e., water pump energy needed to provide for the hybrid aeroponics/hydroponics system, DC power running the LEDs hung on grow walls, and dehumidifier assisting in moisture condensation in summer) are measured/modeled. Ultimately, all models are combined to establish an annual load profile for an agrotunnel that is then used to model the necessary PV to power the system throughout the year. The results find that agrivoltaics to power an agrotunnel range from 40 to 50 kW and make up an area from 3.2 to 10.48 m²/m² of an agrotunnel footprint. Net zero agrotunnels are technically viable although future work is needed to deeply explore the economics of localized vertical food growing systems. Full article

The objective of this study was to investigate the impact of solar radiation intensity on the performance of direct-expansion solar PVT heat pump systems. To this end, an experimental setup was constructed for direct-expansion photovoltaic (PVT) solar heat pump water heating systems and photovoltaic (PV) power generation systems. The system performance and main parameters were analyzed and discussed under different solar radiation intensities. The winter experiments in southern China revealed that the exhaust temperature of the heat pump unit varied considerably under clear conditions, while the back temperature remained stable, fluctuating between approximately −13.5 °C and 24 °C. In contrast, the power generation of PVT panels increased with the increase in radiation intensity, from 78.33 W to 122.68 W, for an increase of 56.6%. Furthermore, the total electricity generation of the PVT panels was higher than that of PV panels, with an increase of 8.7–8.3%. Nevertheless, discrepancies between experimental and theoretical data were observed, particularly under overcast conditions, where the back panel temperature error was pronounced. Additionally, the system exhibited enhanced stability at elevated temperatures in comparable environments, accompanied by an improvement in the system’s coefficient of performance (COP) by 5.67%. Full article

In this study, we investigated the performance of air-to-water heat pump (AWHP) and energy recovery ventilator (ERV) systems combined with photovoltaics (PV) to achieve the energy independence of a dormitory building and conducted an analysis of the energy independence rate and economic feasibility by using energy storage devices. Our data were collected for 5 months from July to November, and the building energy load, energy consumption, and system performance were derived by measuring the PV power generation, purchase, sales volume, AWHP inlet and outlet water temperature, and ERV outdoor, supply, and exhaust temperature. When analyzing representative days, the PV–AWHP integrated system achieved an energy efficiency ratio (EER) of 4.49 and a coefficient of performance (COP) of 2.27. Even when the generated electrical energy exceeds 100% of the electricity consumption, the energy self-sufficiency rate remains at 24% due to the imbalance between energy consumption and production. The monthly average energy self-sufficiency rate changed significantly during the measurement period, from 20.27% in November to 57.95% in September, highlighting the importance of energy storage for self-reliance. When using a 4 kWp solar power system and 4 kWh and 8 kWh batteries, the annual energy self-sufficiency rate would increase to 67.43% and 86.98%, respectively, and our economic analysis showed it would take 16.5 years and more than 20 years, respectively, to become profitable compared to the operation of an AWHP system alone. Full article