Search Results (38)

Fire-resistant coatings have emerged as crucial materials for reducing fire hazards in various industries, including construction, textiles, electronics, and aerospace. This review provides a comprehensive account of recent advances in fire-resistant coatings, emphasizing environmentally friendly and high-performance systems. Beginning with a classification of traditional halogenated and non-halogenated flame retardants (FRs), this article progresses to cover nitrogen-, phosphorus-, and hybrid-based systems. The synthesis methods, structure–property relationships, and fire suppression mechanisms are critically discussed. A particular focus is placed on bio-based and waterborne formulations that align with green chemistry principles, such as tannic acid (TA), phytic acid (PA), lignin, and deep eutectic solvents (DESs). Furthermore, the integration of nanomaterials and smart functionalities into fire-resistant coatings has demonstrated promising improvements in thermal stability, char formation, and smoke suppression. Applications in real-world contexts, ranging from wood and textiles to electronics and automotive interiors, highlight the commercial relevance of these developments. This review also addresses current challenges such as long-term durability, environmental impacts, and the standardization of performance testing. Ultimately, this article offers a roadmap for developing safer, sustainable, and multifunctional fire-resistant coatings for future materials engineering. Full article

To determine the long-term effect of Australian bushfires on the upper tropospheric composition in the South Pacific, we investigated the variation in CO and hydrocarbon species in the South Pacific according to the extent of Australian bushfires (2004–2020). We conducted analyses using satellite data on hydrocarbon and CO from the Atmospheric Chemistry Experiment Fourier Transform Spectrometer (ACE-FTS), and on fire (fire count, burned area, and fire radiative power) from the Moderate Resolution Imaging Spectroradiometer (MODIS). Additionally, we compared the effects of bushfires between Northern and Southeastern Australia (N_Aus and SE_Aus, respectively). Our analyses show that Australian bushfires in austral spring (September to November) result in the largest increase in CO and hydrocarbon species in the South Pacific and even in the west of South America, indicating the trans-Pacific transport of smoke plumes. In addition to HCN (a well-known wildfire indicator), CO and other hydrocarbon species (C₂H₂, C₂H₆, CH₃OH, HCOOH) are also considerably increased by Australian bushfires. A unique finding in this study is that the hydrocarbon increase in the South Pacific mostly relates to the bushfires in N_Aus, implying that we need to be more vigilant of bushfires in N_Aus, although the severe Australian bushfire in 2019–2020 occurred in SE_Aus. Due to the surface conditions in springtime, bushfires on grassland in N_Aus during this time account for most Australian bushfires. All results show that satellite data enables us to assess the long-term effect of bushfires on the air composition over remote areas not having surface monitoring platforms. Full article

The biologic response following the insertion of dental implants is a widely studied process. Recent research has highlighted the importance of implant surface topography and chemistry as highly influential factors in consolidating the dental implant with the surrounding biological environment. The hydrophilicity, or wettability, of dental implants plays a pivotal role in these interactions and successful osseointegration. A more well-established factor that can also influence the development of the tissue–implant interface is exposure to tobacco smoke. While the negative impact of smoking on the biological response of the tissue is clear, there has been no research evaluating the impact that tobacco smoke can have directly on the surface chemistry of dental implants. The present study aimed to explore the effect of smoking on implant surface chemistry and wettability in vitro. Five different implant disks (Ti-Mach, Ti-SLA, Ti-Alloy, Zirc-1 and Zirc-2) were subjected to contamination with tobacco smoke using a portable smoke infuser with dome enclosure. Occasional smoking (5×/day 10 min each for 3 days) and heavy smoking (20×/day for 10 min each for 10 days) were simulated. The wettability of the implant disks was evaluated via the contact angle technique using artificial blood and albumin, as well as saline as a control. It was determined that the contamination of implant surfaces due to smoking produces changes in the surface chemistry and wettability. Changes in the surface hydrophilicity differed based on the implant material. Within the constraints of this investigation, tobacco smoke improved the hydrophilicity of titanium surfaces but worsened that of ceramic surfaces when utilizing the testing solutions. Different implant surfaces exhibit different wetting behavior following contamination with nicotine smoke. This might have an impact on the treatment of peri-implantitis in smokers due to changes in implant surface hydrophilicity, which can affect the re-osseointegration process. Full article

The Asteraceae family is a large plant family, with over 1600 genera and 25,000 species, most of which are generally herbaceous plants. This family’s members are widely used in the human diet and medicine. One of the most popular representatives is Centaurea benedicta L., known as ‘Blessed Thistle’. It is a famous plant in the herbal world with some medical benefits, such as strong antioxidant and antidepressant effects, with antibacterial and antiseptic properties, a stimulant of appetite, with a good effect on the liver and the secretion of bile juices, etc. Therefore, this work aimed to fully characterize the chemical composition of the seeds of C. benedicta introduced in Bulgaria, some of the physicochemical characteristics, as well as the biologically active compounds. The main nutrient in the chemical composition was carbohydrates (68.5%), and half of their quantity was occupied by fibers (32.2%). Total proteins accounted for 16.4%, and the glyceride oil content was rather low—about 11.0%. The main fatty acids identified in the seed oil were linoleic (72.1%) and oleic acids (18.1%), and the amount of the polyunsaturated ones predominated (73.0%). The main lipid-soluble bioactive components were sterols (0.9%), phospholipids (1.9%), and tocopherols (492 mg/kg). β-Sitosterol (59.5%) and stigmasterol (19.4%) were the main sterols, and α-tocopherol (472 mg/kg) predominated in the tocopherol fraction. The major phospholipids were phosphatidylethanolamine (45.4%), followed by phosphatidylinositol (37.1%) and phosphatidylcholine (6.1%). Full article

Forests are vital for life on Earth but are threatened by forest fires, which have significant impacts on climate change both locally and globally. This study examines a forest fire that lasted from 15 to 26 February 2019 in Karnataka, India, using the Weather Research and Forecasting model with Chemistry (WRF-Chem) model to analyze the effects and atmospheric spread of fire-emitted aerosols. Model simulations are analyzed to understand the horizontal and vertical transport and radiative effects of the fire. The results show high aerosol levels and smoke particles reaching up to 3.5 km altitude and above. The fire raised near-surface air temperatures by ~1–1.5 °C. The net atmospheric forcing due to the fire over the affected area ranged from approximately 10 to 14 W/m², resulting in heating rates between about 0.002 and 0.005 K/day in the impacted region. Full article

At the end of the dry season, from early March to early April each year, extensive agricultural biomass waste burnings occur throughout insular mainland Southeast Asia. During this biomass-burning period, smoke aerosols blanketed the whole region and were transported and dispersed by predominant westerly and southwesterly winds to southern China, Taiwan, and as far southern Japan and the Philippines. The extensive and intense burnings coincided with some wildfires in the forests due to high temperatures, making the region one of the global hot spots of biomass fires. In this study, we focus on the effect of pollutants emitted from biomass burnings in March 2019 at the height of the burning period on the exposed population and their health impact. The Weather Research Forecast-Chemistry (WRF-Chem) model was used to predict the PM_2.5 concentration over the simulating domain, and health impacts were then assessed on the exposed population in the four countries of Southeast Asia, namely Thailand, Laos, Cambodia, and Vietnam. Using the health impact based on log-linear concentration-response function and Integrated Exposure Response (IER), the results show that at the peak period of the burnings from 13 to 20 March 2019, Thailand experienced the highest impact, with an estimated 2170 premature deaths. Laos, Vietnam, and Cambodia followed, with estimated mortalities of 277, 565, and 315 deaths, respectively. However, when considering the impact per head of population, Laos exhibited the highest impact, followed by Thailand, Cambodia, and Vietnam. The results highlight the significant health impact of agricultural waste burnings in Southeast Asia at the end of the dry season. Hence, policymakers should take these into account to design measures to reduce the negative impact of widespread burnings on the exposed population in the region. Full article

The complex nonlinear characteristics of atmospheric chemistry necessitate the development of new methods for calculating source–receptor (S–R) relationships for secondary air pollutants. In this study, the monthly characteristics and S–R relationships of anthropogenic total nitrate (i.e., the sum of N from nitric acid, inorganic nitrate, and peroxyacetyl nitrate) in Northeast Asia were simulated and analyzed. The Community Multiscale Air Quality (CMAQ), Fifth-Generation NCAR/Penn State Mesoscale (MM5), and Sparse Matrix Operator Kernel Emissions (SMOKE) models were employed for air quality modeling, meteorological fields, and emissions processing, respectively. The study area encompassed Republic of Korea, Japan, and most of China. Five source/receptor regions were defined to derive the S–R relationships: three in China, one in Republic of Korea, and one in Japan. To produce data for the calculation of the S–R relationship, several experiments were conducted with a 20% reduction in NO_x emission sources. As a result of the S–R relationships, China was rarely impacted by the other two countries. The total depositions in other countries were significantly dominated by China (i.e., 43.5% and 40.7% in Republic of Korea and Japan, respectively, and up to 82.3% in December for Republic of Korea). Full article

Smoke intoxication is a central event in mass burn incidents, and toxic smoke acts at different levels of the body, blocking breathing and oxygenation. The majority of these patients require early induction of anesthesia to preserve vital functions. We studied the influence of hemoglobin (HMG) and myoglobin (MGB) blockade by hydrochloric acid (HCl) in an interaction model with gaseous anesthetics using molecular docking techniques. In the next part of the study, molecular dynamics (MD) simulations were performed on the top-scoring ligand–receptor complexes to investigate the stability of the ligand–receptor complexes and the interactions between ligands and receptors in more detail. Through docking analysis, we observed that hemoglobin creates more stable complexes with anesthetic gases than myoglobin. Intoxication with gaseous hydrochloric acid produces conformational and binding energy changes of anesthetic gases to the substrate (both the pathway and the binding site), the most significant being recorded in the case of desflurane and sevoflurane, while for halothane and isoflurane, they remain unchanged. According to our theoretical model, the selection of anesthetic agents for patients affected by fire smoke containing hydrochloric acid is critical to ensure optimal anesthetic effects. In this regard, our model suggests that halothane and isoflurane are the most suitable choices for predicting the anesthetic effects in such patients when compared to sevoflurane and desflurane. Full article

Electronic nicotine delivery systems (ENDSs) are designed as a non-combustible alternative to cigarettes, aiming to deliver nicotine without the harmful byproducts of tobacco combustion. As the category evolves and new ENDS products emerge, it is important to continually assess the levels of toxicologically relevant chemicals in the aerosols and characterize any related toxicology. Herein, we present a proposed framework for characterizing novel ENDS products (i.e., devices and formulations) and determining the reduced risk potential utilizing analytical chemistry and in vitro toxicological studies with a qualitative risk assessment. To demonstrate this proposed framework, long-term stability studies (12 months) analyzing relevant toxicant emissions from six formulations of a next-generation product, JUUL2, were conducted and compared to reference combustible cigarette (CC) smoke under both non-intense and intense puffing regimes. In addition, in vitro cytotoxicity, mutagenicity, and genotoxicity assays were conducted on aerosol and smoke condensates. In all samples, relevant toxicants under both non-intense and intense puffing regimes were substantially lower than those observed in reference CC smoke. Furthermore, neither cytotoxicity, mutagenicity, nor genotoxicity was observed in aerosol condensates generated under both intense and non-intense puffing regimes, in contrast to results observed for reference cigarettes. Following the proposed framework, the results demonstrate that the ENDS products studied in this work generate significantly lower levels of toxicants relative to reference cigarettes and were not cytotoxic, mutagenic, or genotoxic under these in vitro assay conditions. Full article

The investigation of novel sample matrices in the forensic sciences offers several possible advantages, such as allowing for results to be obtained in cases where common sample types are absent. This review focuses on the application of gas chromatography and gas chromatography–mass spectrometry (GC-MS) for the determination of drugs in alternative sample matrices, including hair, sweat, meconium, breast milk, and vitreous humour. Less common sample types are also reported including air, cerumen, insects, and their larvae and pupae. The application of pyrolysis GC-MS (Py GC-MS) is also reviewed, showing the possibility of determining high molecular weight drugs which would commonly be unattainable by GC-MS. The application of Py GC-MS for the simulation and investigation of the underlying chemistry and the products formed in the smoking of drugs is also reported. Full article

In the summer of 2018, Sweden experienced widespread wildfires, particularly in the region of Jämtland Härjedalen during the final weeks of July. We previously conducted an epidemiological study and investigated acute respiratory health effects in eight municipalities relation to the wildfire air pollution. In this study, we aimed to estimate the potential health impacts under less favorable conditions with different locations of the major fires. Our scenarios focused on the most intense plume from the 2018 wildfire episode affecting the largest municipality, which is the region’s only city. Combining modeled PM2.5 concentrations, gridded population data, and exposure–response functions, we assessed the relative increase in acute health effects. The cumulative population-weighted 24 h PM_2.5 exposure during the nine highest-level days reached 207 μg/m³ days for 63,227 inhabitants. We observed a small number of excess cases, particularly in emergency unit visits for asthma, with 13 additional cases compared to the normal 12. Overall, our scenario-based health impact assessment indicates minor effects on the studied endpoints due to factors such as the relatively small population, limited exposure period, and moderate increase in exposure compared to similar assessments. Nonetheless, considering the expected rise in fire potential due to global warming and the long-range transport of wildfire smoke, raising awareness of the potential health risks in this region is important. Full article

As they continuously evolve, plants will remain a renewable source for antimicrobial compounds. Omani frankincense is produced by B. sacra trees and is graded into Hojari, Nejdi, Shazri or Sha’bi. Air can be a source for pathogenic or food spoilage microbes; thus, inactivating airborne microbes is necessary in environments such as food and animal production areas. This study investigated the antimicrobial activity and the chemistry of steam-distilled oils of Hojari and Sha’bi grades. It also analyzed the antimicrobial activity of frankincense smoke and the size of its solid particles. Chemical analysis was performed using gas chromatography mass spectrometry (GC-MS). The antimicrobial activity of the oils against Staphylococcus aureus (NCTC 6571), Bacillus spp., Escherichia coli (NCTC 10418), Pseudomonas aeruginosa (NCTC 10662), Saccharomyces cerevisiae, Candida albicans, Aspergillus flavus, Aspergillus ochraceus, Aspergillus niger, Penicillium citrinum, Alternaria alternata and Fusarium solani was determined using well diffusion and micro-well dilution methods. A microscopic technique was used to determine the size of frankincense smoke solid particles. Microbes were exposed to frankincense smoke to test their susceptibility to the smoke. Hojari and Sha’bi oils were similar in composition and contained monoterpenes and sesquiterpenes. The Hojari and the Sha’bi oils possessed broad spectrum antimicrobial activity. The largest growth inhibition zones were obtained with S. cerevisiae and F. solani. An MIC of 1.56% (v/v) was found with E. coli, S. cerevisiae and F. solani. Frankincense smoke contained fine irregular solid particles with a diameter range of 0.8–2287.4 µm, and thus may pose a health risk to susceptible individuals. The smoke had potent antimicrobial activity against S. aureus, E. coli, and airborne bacteria, yeast and mold, with a maximum inhibition of 100%. It was concluded that Hojari and Sha’bi frankincense oils and smoke had significant antimicrobial activity that can be exploited in controlling human, animal and plant pathogenic microbes. Full article

The most extreme manifestation of a fire–weather interaction is the formation of pyrocumulonimbus (pyroCb) thunderstorms, triggered by super-heated updrafts, which can eject smoke at altitudes exceeding 20 Km. In this study, we investigated climate-related impacts from the most intensive pyroCb-triggered injection of smoke in the stratosphere: the Australian New Year wildfires in 2019/2020. We first provide a general overview of the vision and objectives of the StratoFIRE project. With the aid of the global chemistry-climate model EMAC, we then simulate radiative and chemical perturbations in the stratosphere in relation to 0.9 Tg smoke in the stratosphere assuming different injection heights, from 13 to 16 Km. The simulation of stratospheric optical depth perturbations were found to be sensitive to the assumed injection height, with a maximum height at 16 Km showing the best agreement with the GLOSSAC and SAGE-ISS aerosol extinction observations. Full article

New disease targets and medicinal chemistry approaches are urgently needed to develop novel therapeutic strategies for treating pulmonary diseases. Emerging evidence suggests that reduced activity of protein phosphatase 2A (PP2A), a complex heterotrimeric enzyme that regulates dephosphorylation of serine and threonine residues from many proteins, is observed in multiple pulmonary diseases, including lung cancer, smoke-induced chronic obstructive pulmonary disease, alpha-1 antitrypsin deficiency, asthma, and idiopathic pulmonary fibrosis. Loss of PP2A responses is linked to many mechanisms associated with disease progressions, such as senescence, proliferation, inflammation, corticosteroid resistance, enhanced protease responses, and mRNA stability. Therefore, chemical restoration of PP2A may represent a novel treatment for these diseases. This review outlines the potential impact of reduced PP2A activity in pulmonary diseases, endogenous and exogenous inhibitors of PP2A, details the possible PP2A-dependent mechanisms observed in these conditions, and outlines potential therapeutic strategies for treatment. Substantial medicinal chemistry efforts are underway to develop therapeutics targeting PP2A activity. The development of specific activators of PP2A that selectively target PP2A holoenzymes could improve our understanding of the function of PP2A in pulmonary diseases. This may lead to the development of therapeutics for restoring normal PP2A responses within the lung. Full article

Fire is a typical disaster in the processing industry. Ionic liquids, as a type of green flame retardant, play an important role in process safety. In order to grasp the current research status, hotspots, and frontiers in the field of ionic liquids in flame retardancy, the bibliometric mapping method is applied to study the relevant literature in Web of Science datasets from 2000–2022 in this paper. The results show that the research on ionic liquids in flame retardancy is multidisciplinary and involves some disciplines such as energy science, material science, and environmental protection. Journal of Power Sources, Polymer Degradation and Stability, ACS Applied Materials and Interfaces, and Chemical Engineering Journal are the core journals in the field. The results of keyword co-occurrence indicate that the hotspots of research can be divided into five components: the improvement and application of pure ionic liquids electrolytes, the research of gel polymer electrolytes, applying ionic liquids to enhance the polymer materials’ flame retardancy properties, utilizing ionic liquids and inorganic materials to synergize flame retardant polymers, and using ionic liquids flame retardant to improve material’s multiple properties. The burst terms and time zone diagram’s results point out the combination of computational quantum chemistry to study the flame retardancy mechanism of ionic liquids, the study of fluorinated electrolytes, ionic liquids for smoke suppression, phosphorus-containing ionic liquids for flame retardant, and machine learning-assisted design of ILs flame retardants are the research frontiers and future research trends. Full article