Search Results (3,766)

This study investigates the dynamic and causal effects of climate stress and Artificial Intelligence-enabled agricultural monitoring on cultivated land quality, productivity, and sustainability in Saudi Arabia. Using a balanced panel of region–crop observations covering 13 administrative regions and six major crops over the period 2010–2024, the analysis integrates high-resolution climate variables with remote sensing-based indicators, including the Normalized Difference Vegetation Index, Enhanced Vegetation Index, Net Primary Productivity, Water-Use Efficiency, and crop water productivity. A comprehensive econometric framework combining the System Generalized Method of Moments, Difference-in-Differences, and event-study approaches is employed to address persistence, endogeneity, and causal identification. The results show that water availability—captured by soil moisture and precipitation—significantly enhances cultivated land outcomes (coefficients ≈ 0.05–0.11), while heat stress and wind speed exert strong negative effects (coefficients ≈ −0.04 to −0.12), highlighting the vulnerability of arid agricultural systems. Artificial Intelligence-enabled monitoring and smart irrigation adoption consistently improve land quality and productivity, with the largest gains observed in water-use efficiency and crop water productivity. Artificial Intelligence adoption increases water-use efficiency and crop water productivity by approximately 8–10%, while heat stress reduces vegetation indicators by about 9–12%. Event-study evidence confirms that these effects emerge after adoption and persist over time, supporting a causal interpretation. Overall, the findings demonstrate that AI technologies mitigate climate stress primarily through improved water management and adaptive decision-making. The study provides policy-relevant insights aligned with Saudi Vision 2030, emphasizing digital agriculture as a key instrument for sustainable cultivated land governance, climate adaptation, and food security in water-scarce environments. Full article

Intending to improve building performance and environmental sustainability, vertical greenery systems (VGSs) are employed as effective nature-based solutions (NbSs), yet they often struggle to meet modern building energy demands alone. This study investigates the integration of VGSs with advanced façade technologies (AFTs) to develop multifunctional hybrid façades. A systematic review was conducted following PRISMA 2020 guidelines, combining bibliometric and thematic analyses of 415 publications (2015 to early 2026) from Scopus and Web of Science. The study categorizes AFT into adaptive, energy-generating, and high-performance façades. The results indicate that VGS–photovoltaic (PV) systems and double-skin (DS) systems are the most studied integration scenarios, providing significant thermal regulation and energy efficiency. However, significant gaps remain for kinetic, modular, bioactive, and glazing systems, particularly regarding standardized workflows and long-term lifecycle assessments (LCAs). The study reveals a transition of VGSs from passive aesthetic elements to active building components. To address these identified gaps, a four-phase design strategy—conceptualization, hybridization, optimization, and development—is proposed to guide architects and engineers in decision-making regarding generating optimized hybrid façades. Integrating VGSs with AFTs is essential for urban resilience and an alignment with Sustainable Development Goals. Future research should prioritize standardized integration protocols and the application of smart technologies like artificial intelligence (AI). Full article

Power load forecasting is a core technical component for achieving safe, stable, and economic operation in smart grids. This paper proposes a hybrid BiLSTM–Transformer forecasting method based on a Dynamic Adaptive Fusion (DAF) module. The core of this method involves utilizing the DAF module to adaptively weight different feature channels to highlight key influencing factors, while simultaneously employing a temporal attention mechanism to capture the contributions of various time steps. Building on this, the model effectively combines the strengths of BiLSTM networks in capturing bidirectional dependencies with the capability of Transformer models to extract global contextual features, thereby achieving a multi-level dynamic fusion of load characteristics. Experiments on real-world grid datasets demonstrate that the proposed method achieves a significant performance improvement over traditional models, particularly in terms of load peak prediction accuracy and stability. This provides effective technical support for the refined scheduling of power systems. Full article

Tornadoes pose growing threats to both communities and the built environment, yet few studies have quantified how spatial characteristics of the built environment interact with social and economic factors while influencing tornado impacts. This paper introduces an integrated metric that combines tornado risk and exposure to evaluate localized disaster impact. Focusing on Florida’s Panhandle, we examine how housing density and affordability, network connectivity, and urban form efficiency, together with demographic and socioeconomic attributes, shape tornado impacts at the U.S. census block group (CBG) level. To address spatial autocorrelation and non-stationarity, five statistical models were compared, including both global and local spatial regressions. The findings indicate that multiscale geographically weighted regression (MGWR) most effectively captures the spatial heterogeneity of tornado impacts. Built-environment and affordability factors show clear spatial heterogeneity— smart location indexand housing cost burden (h_ami) are positively associated with tornado impact in CBGs near Tallahassee and parts of Pensacola—suggesting amplified impacts in location-efficient urban areas where exposure is concentrated and affordability stress may limit preparedness and recovery. In contrast, network density is negatively associated with the impact of key clusters, consistent with the idea that denser, more redundant road networks can reduce canopy-weighted disruption by providing alternative routes for emergency access and restoration. Overall, these findings can inform our understanding of how the built environment influences tornado exposure, offering critical insights for planners and policymakers seeking to strengthen communities against tornadoes. Full article

The rapid growth of electric vehicles (EVs) is reshaping transport systems and accelerating the sustainable digital transformation of smart mobility. EV battery-swapping, delivered through platform-based, data-driven service networks, offers a low-carbon alternative to conventional refueling and plug-in charging by shortening replenishment time and enabling centralized battery management. However, the behavioral mechanisms driving user adoption of this digitally enabled infrastructure remain insufficiently understood. This study develops a socio-technical system (STS) model in which social and technical drivers influence users’ intention to adopt EV battery-swapping services via the dual mediation of perceived trust and perceived risk. Using a three-stage mixed-methods design that combines a PRISMA-based literature review, expert interviews with user-journey mapping, and a large-scale user survey, the study identifies six social and technical antecedents of EV battery-swapping adoption. Based on 565 valid responses from EV users in the Beijing–Tianjin–Hebei region, partial least squares structural equation modeling and multi-group analysis are employed to test the proposed framework. The results show that all six antecedents significantly affect perceived trust and perceived risk, which in turn mediate their impacts on adoption intention, with notable heterogeneity across income and usage-frequency groups. The findings provide a mechanism-based extension of STS theory for digitally mediated battery-swapping infrastructure by showing how socio-technical conditions shape adoption via trust and risk, and they offer actionable implications for operators and policymakers to build secure, user-centered swapping services within intelligent transport systems. Full article

Escalating requirements for smart energy management are driving advances in functional electrochromic devices (ECDs), which are pivotal for the regulation of light, heat, and reduction in energy consumption in buildings, transportation, and smart devices. However, the commercialization of ECDs is hindered by com plex designs, high fabrication costs, and slow switching speeds. Additive manufacturing (AM, 3D-printing) emerges as a promising approach to overcome these limitations, as it enables the creation of complex structures, enhances design flexibility, and can reduce production costs. For such printed devices, materials combining poly(ionic liquids) (PILs) with ionogels—an emerging and promising class of materials known for their high ionic conductivity, stability, and tunable properties—are particularly suitable for integration with 3D printing. Comparing previous reviews that address PILs, ionogels, or AM modalities in isolation, this work uniquely combines the structure–property–processing relationships specific to the synergistic integration of these fields. Current work highlights recent progress in PIL/ionogel-based ECDs and distills specific design guidelines for optimizing ink rheology, balancing ionic conductivity with mechanical integrity, and selecting appropriate printing modalities. These insights provide a roadmap for overcoming current fabrication challenges and scaling up next-generation smart devices. Full article

Accurate forecasting of multivariate time series is essential for energy management, grid optimisation, and policy planning. This study presents a hybrid deep learning and Transformer-based forecasting framework for predicting hourly electricity consumption across Turkey using nationwide data from Energy Exchange Istanbul (EPİAŞ) between 2018 and 2025. The dataset comprises 15 variables representing diverse energy sources and market indicators, including consumption, generation, and the market-clearing price (MCP). The proposed hybrid model integrates Long Short-Term Memory (LSTM), Bidirectional LSTM (BLSTM), and Gated Recurrent Unit (GRU) layers to capture both short- and long-term temporal dependencies, while a Transformer model leveraging multi-head self-attention mechanisms is used for comparison. All models were trained using standardised preprocessing, a 24 h lookback window, and optimised hyperparameters via GridSearchCV. Experimental results reveal that the hybrid model achieved the best overall performance, with MAE = 464.01, RMSE = 663.39, and R² = 0.9902, significantly outperforming the baseline and Transformer models. The Transformer demonstrated robust long-horizon learning capability (R² = 0.9257) but at a higher computational cost. These results confirm that combining multiple recurrent architectures enhances predictive accuracy and stability for large-scale, real-time energy forecasting. The proposed framework offers a reliable foundation for smart grid operations, demand prediction, and data-driven energy policy development. Full article

Integrating third-party Machine Learning (ML) models into industrial Operational Technology (OT) creates a procurement deadlock: operators cannot verify vendor performance claims without sharing representative evaluation data with vendors, while vendors refuse to reveal proprietary model weights before purchase, rendering traditional safeguards such as Non-Disclosure Agreements technically unenforceable. This paper introduces a framework combining Zero-Knowledge Proofs (ZKPs) with smart contracts to enable trust-minimized, cryptographically verifiable competitive model procurement in Industrial Cyber-Physical Systems (ICPS). Vendors cryptographically prove that their model outperforms a legacy baseline without disclosing proprietary weights, a process we term cryptographic performance attestation, while the on-chain workflow automates escrow, proof verification, and best-vendor selection with arbiter-based dispute resolution. ZKP privacy is scoped to vendor model weights; operator-side evaluation-data confidentiality is managed separately via synthetic, de-identified, or public benchmark data. We analyze three ZKP workflow variations and evaluate them on consumer-grade hardware, achieving proving times of approximately three seconds and sub-dollar on-chain verification costs under Layer-2 fee assumptions for the recommended single-proof variation, while identifying computational trade-offs of recursive proof aggregation. The entire verification phase operates offline with no impact on real-time OT control paths, bridging the IT/OT pre-transaction trust gap while deferring artifact deployment to existing OT tooling. Full article

The delivery of energy and water meter data, management and control information on separate networks is expensive and defeats the gains of the Advanced Metering Infrastructure (AMI) Smart Grid (SG). In most cases, energy, gas and water services are offered by the same organizational entity, hence the use of different infrastructure for data, service delivery, control and management is expensive and highly illogical. There is a need for a combined energy and water infrastructure to reap the benefits of the AMI SG. Furthermore, combined metering will result in accurate billing, potential cost savings, and improved resource management. This work therefore develops and investigates a combined energy and water AMI smart metering framework. This is possible through a thorough understanding of the AMI technological standards. The implementation of such a system is not trivial, as it depends on many factors: environmental, geographical, technological, economical, regulatory and the existing legacy infrastructure. Optimal technological implementation choices are developed towards an integrated AMI infrastructure. An experimental test bed is developed for delivering energy and water metering data to the utility. The optimal placement results favor the system of separating energy and water actuators at the home area network of the SG while using an integrated communication system. Such a system is feasible, given the different evolution of electricity and water meters and their placement at the home area network, and enables water metering to benefit from the more advanced electrical metering infrastructure. Full article

Here, we develop a digital community management application (APP) and an energy prediction and analysis system for smart communities. The system integrates the internet of things (IoT) technology and multiple prediction models to improve the intelligence and automation of community energy management. The developed APP has the following functions: user classification, announcement notification, express delivery management, GPS positioning navigation, calendar, and energy forecast. The hardware architecture of the system consists of a voltage/current sensing module, a Wireless Fidelity (Wi-Fi) module, and an Arduino platform, allowing real-time feedback and display of power consumption data. The energy forecasting part proposes a two-layer hybrid model architecture. This architecture combines Seasonal Trend decomposition using Loess (STL) time series decomposition, extreme gradient boosting (XGBoost), and Seasonal Autoregressive Integrated Moving Average (SARIMA) models to predict residential electricity consumption trends over the next 3 years. The results of the model prediction are verified using the data on Taiwan’s electricity consumption. The model accurately predicts the average monthly residential electricity consumption with a relative error of 5.8%, an acceptable energy management accuracy. This system integrates APP applications and efficient prediction models, demonstrating its great potential in smart community energy management and enhanced resident interaction. Full article

The electricity supply system faces major challenges. The physical and social vulnerability of the monoculture of hierarchical, centralized systems urgently requires radical transformation of their organizational structures as well as their infrastructures. These transformations to low carbon are often characterized as ‘decentralization’. However, decentralization is a process that only signifies a move away from centralized models. This does not necessarily result in a decentralized architecture, but rather a model in which the dominance of ‘commercial private’ combined with ‘monopolistic public’ is replaced by cooperation and community. The research question is: what will be the design of future electricity grids after the transformation? The integration of distributed renewable resources and the growing need for resilience requires great diversity and flexibility from socio-technical smart grids. These involve digitization, enabling the transformation of power grids into networks of clustered, self-healing microgrids with distributed energy systems: generation, storage, transmission, demand response, and internal energy management. Several fundamentals of Common Pool Resources theory (Ostrom) on the analysis of sustainable management of natural resources are reviewed on their relevance: the Socio-Ecological System framework, distinct property regimes, the Polycentricity concept, and the Institutional Analysis and Development (IAD) framework. The transformation leads to ‘distributed’ rather than ’decentralized’ models. Governance no longer takes place from a single control point, but from many, spread across multiple levels, similar to ecosystems. End users play a key role and become partly coproducing prosumers. Governance is polycentric rather than decentral. The IAD provides as its most important condition that, at the legislative level, there must be minimum recognition of the right of ‘renewable energy communities’ to organize themselves as microgrids. This is immediately the biggest social acceptance challenge, as the current monoculture incorporates several lock-ins: incumbent powerful actors, centralized hierarchical control legislation, and obstructive market conditions, including taxing systems. Full article

The adoption of electric vehicles (EVs) is a promising strategy for reducing emissions and promoting sustainable mobility. The increasing adoption of EVs has created a demand for efficient and sustainable charging infrastructure. The integration of rooftop solar-powered EV charging stations into distribution networks is a promising solution for reducing carbon emissions and improving grid efficiency. This integration also introduces challenges, such as power quality issues, grid instability, and the impact of environmental factors on solar generation. This study proposes a novel system that integrates a smart control algorithm for a central battery management system (CBMS) with advanced bidirectional DC-DC converters for optimised power distribution. Unlike existing systems that focus on individual components, this study combines real-time environmental monitoring with adaptive power management algorithms to handle variations in generation owing to solar irradiance, temperature, and shading, and ensure maximum power harvesting. This study also presents the role of the DC-to-DC converter integrated with a smart charging control and CBMS in smart grid-enabled EV charging station. The proposed system was validated using MATLAB 2025b Simulink simulations. This study demonstrates an improvement in overall grid stability and highlights the potential of DC-DC converter technologies for smart grid applications and decarbonisation efforts. Full article

This review presents a comprehensive analysis of modern thermosensitive polymer systems for in situ systems (ISSs) which are used for targeted drug delivery in situ. The main classes of polymers used to create “smart” hydrogels that undergo a “sol–gel” phase transition in response to a temperature stimulus in the physiological range are considered. Key representatives of thermosensitive matrices are described in detail: synthetic block copolymers (poloxamers, block copolymers of polylactic-co-polyglycolic acid with polyethyleneglycol, etc.) and natural, modified natural, and semi-synthetic polymers (chitosan, including in combination with β-glycerophosphate, xyloglucan, etc.). This paper systematizes the advantages and disadvantages of various thermosensitive systems and highlights the key risks in their pharmaceutical development, including the influence of the nature and concentration of the active pharmaceutical ingredients and excipients on the rheological properties and phase transition temperature. Particular attention is paid to the difference between thermoreversible and irreversible gel-forming systems. Modern in vitro, ex vivo, and in vivo methods for evaluating critical quality parameters of thermosensitive systems, such as gelation temperature and time, gel strength, mucoadhesive properties, and release kinetics, are discussed. The need to develop standardized and biologically relevant methods to improve the reproducibility and success of preclinical studies is emphasized. The review is intended to help researchers to make informed choices about polymer matrices and optimize compositions for successful pharmaceutical development. Full article

The global maritime industry, a critical pillar of international trade, continues to face persistent challenges in ensuring the integrity, security, and transparency of containerized cargo data, particularly during ocean transport. Traditional container tracking systems at sea often lack the reliability and resilience required to prevent data tampering, cyber threats, and operational inefficiencies. As supply chains become more complex and interconnected, the demand for robust, end-to-end data security solutions becomes more pressing. A promising technological advancement in this area is the convergence of smart containers, equipped with Internet of Things (IoT) sensors for real-time condition monitoring, and blockchain technology (BCT) for secure data validation. These IoT devices facilitate continuous tracking of critical parameters such as location, temperature, humidity, tilt, and the like. However, the data they generate remains vulnerable to cyberattacks, signal disruptions, and unauthorized alterations. Blockchain’s decentralized and tamper-evident architecture addresses these vulnerabilities by enabling secure data immutability, transparent audit trails, and enhanced stakeholder trust. Despite its potential, the practical integration of blockchain with smart container systems in maritime logistics remains largely underexplored. To bridge this gap, this paper proposes a blockchain-enabled smart container monitoring system that combines container real-time data with secure physical tracking. Furthermore, to ensure scalability and efficient in data storage, hybrid on/off-chain architecture is introduced, balancing blockchain integrity with performance and resource optimization. Full article

This study explores how extreme heat, farm design, and genotype interact to shape the growth, yield, and quality of hops (Humulus lupulus L.) in semi-arid Mediterranean environments, supporting climate-resilient expansion of high-value specialty crops beyond traditional production regions. Field performance of Cascade and Chinook was evaluated across contrasting management settings in inland Sicily during the 2023 growing season. Microclimatic observations from the Sicilian Agrometeorological Information Service (SIAS) were coupled with the quantitative heat-stress indicator Extra Degree Days (EDD) to link thermal exposure to phenology and quality outcomes. Results suggest that hop performance under semi-arid Mediterranean conditions is shaped by cultivar choice and management-defined environments, with cone yield and, especially, resin and essential oil traits varying across trellis and soil cover settings. Using phase-specific heat exposure as an interpretable indicator of thermal pressure, this study provides a decision-oriented framework to relate heat conditions to phenology and quality outcomes and to support the selection of cultivar–management combinations suited to heat-prone regions. Overall, the findings inform climate-smart hop management strategies to sustain cone quality amid increasing temperature variability in semi-arid environments. Full article