Search Results (1,998)

Background: Bedside manipulation of adult anti-tuberculosis tablets for paediatric dosing is common in low-resource settings, yet it can compromise drug stability. This study investigated how grinding and multi-drug co-suspension affect the supramolecular organisation, thermal stability, and dissolution of isoniazid (INH). Methods: INH raw, INH branded tablets (whole and ground), and multi-drug combination mixtures (MCMs) that simulate paediatric multi-drug-resistant tuberculosis (MDR-TB) regimens were assessed. Samples were analysed as solids and aqueous suspensions using hot-stage microscopy (HSM), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), Raman spectroscopy, FTIR-ATR, USP dissolution, and HPLC (LOD 0.0015 mg mL⁻¹; LOQ 0.005 mg mL⁻¹). Results: Grinding and co-mixing lowered melting points and masked typical INH events. Spectroscopy revealed the broadening and shifting of OH/NH and pyridine-ring bands, consistent with the formation of new hydrogen-bonding networks, correlative with supramolecular rearrangements. In multi-drug suspensions, INH fell below the HPLC quantification limit in both pH 1.2 and 6.8 media, despite visible residue, suggesting the formation of non-dissociable supramolecular complexes. Using a validated HPLC assay, no quantifiable INH was detected from the crushed multi-drug suspensions in either pH 1.2 or pH 6.8, whereas intact API/tablets showed measurable release. Conclusions: Co-suspension of INH with companion tuberculosis (TB) drugs disrupts its supramolecular integrity, leading to pre-administration degradation and a loss of quantifiable drug. Dissolution testing showed minimal INH release at pH 1.2 and none at pH 6.8, contrasting with intact tablets/API. These observations highlight that converting an immediate-release tablet into an aqueous suspension fundamentally alters its physicochemical environment and requires rational formulation design to preserve molecular stability, differentiating true resistance from formulation failure. Full article

Propolis is a chemically complex natural product with recognized antioxidant potential, but its compositional heterogeneity and poor aqueous solubility complicate formulation and interpretation of in vitro release behavior. In this study, a nanostructured lipid carrier (NLC) based on Gelucire^® 44/14 was developed as a physicochemical platform to modulate the accessibility of a selected Chilean ethanolic propolis extract. Propolis extracts from different origins were first screened using complementary antioxidant assays (DPPH, ABTS, ORAC, FRAP), leading to the selection of the Peñaflor extract, which exhibited the highest phenolic content (~41 mg GAE/g) and antioxidant capacity. The selected extract was incorporated into NLCs with encapsulation efficiencies above 90%, a narrow size distribution (~200 nm), and high stability over 90 days. Under simple aqueous conditions, propolis release remained limited (<15% over 6 h), consistent with diffusion- and partition-controlled transport. In simulated gastrointestinal media containing bile components, pronounced pH- and composition-dependent effects were observed. While fed-state intestinal conditions induced extensive morphological remodeling without increasing the analytically accessible fraction (<3% at 4 h), fasted-state intestinal media promoted a higher accessible fraction (~14% within 1 h) without complete carrier disruption, as confirmed by transmission electron microscopy. Preliminary cytocompatibility studies in HepG2 cells showed acceptable viability at 10–40 µg/mL and concentration-dependent effects at higher doses. Overall, this work demonstrates that bile components modulate propolis accessibility through dynamic partitioning and colloidal reorganization rather than simple carrier breakdown, providing a physicochemical framework for future digestion and absorption studies. Full article

Background/Objectives: This article develops theory and methods for 3D tomographic imaging of absorption coefficient distributions using axial scanning with EUV microscopes at 46× and 345× magnification. Unlike conventional CT that requires sample rotation, axial scanning moves cells through the microscope focus. The aim is tomographic reconstruction of living cell fine structure without the organelle staining used in optical fluorescence microscopy or ultra-thin cell slicing as in electron microscopy. Methods: By generalizing the geometric-optical approximation for small absorption coefficient inhomogeneities in absorbing media, we derived a new explicit tomography equation and solution algorithm validated through numerical simulation. The approach was applied to Convallaria cell analysis using the ×46 microscope. For the ×345 microscope, we developed an alternative method where the kernel of the tomography integral equation was determined experimentally using gold nanospheres with known absorption coefficient, shape, and position. This method was tested through modeling and applied to diagnostics of Convallaria and mouse cerebellar granule cells. Results: The developed methods resolve subcellular features down to 140 nm using the ×46 microscope and 50 nm using the ×345 microscope. Thin low-contrast intracellular structures and individual 50–100 nm organelles were detected. Conclusions: Methods for retrieving absorption coefficient distributions in cone-beam geometry based on geometric-optical theory generalization and on calibration by gold nanoparticles have been developed and validated through numerical simulation and cell analysis. These methods demonstrate for the first time the effectiveness of axial nanotomography using multilayer mirror microscopes for cell diagnostics. Full article

Magnetic nanoparticles represent the next-generation drug delivery systems, enabling drug targeting to specific organs without adverse effects on the body and with a controlled release rate. Their strengths are represented by biocompatibility, low cost, and easy drug loading; some drawbacks are aggregation and poor stability in biological media. In the present work, we synthesized magnetic core–shell structures with a magnetite core coated with layered double hydroxides (LDHs) based on Mg²⁺ or Zn²⁺ and Al³⁺ ions and loaded with meloxicam, a poorly water-soluble anti-inflammatory drug. Several syntheses have been attempted to obtain iron oxides based on the only magnetite phase. The combined use of different characterization techniques allowed us to reveal that the best product, showing the crucial room temperature superparamagnetism and a good level of compositional uniformity, was obtained from co-precipitation in nitrogen flow. The next LDH coating was successful, even if the hybrids showed the occurrence of aggregation. The drug was mainly adsorbed onto the LDH surfaces, as shown by the X-ray diffraction and Infrared Spectroscopy techniques. The loaded meloxicam amount was low, but the subsequent release into simulated body fluid could be prolonged for 4 days. Our study provides a proof of concept about the importance of a thorough characterization of the nanocomposite hybrids and their possible use for tricky drugs, such as those of class II of the Biopharmaceutical Classification System. Full article

To address the corrosion protection issues for hot components of high-end equipment in extreme service environments, the C276 alloy coating was deposited on the surface of 304 stainless steel via high-velocity air fuel (HVAF) spraying. The extreme conditions of 1000 °C temperature, an atmosphere containing 6% HCl, and a flow rate of 30 m/s were simulated in the study using a high-temperature airflow corrosion erosion device. The C276 coating and the 304 stainless steel substrates were subjected to a corrosion test for 25 min. The surface phase composition, element distribution, corrosion product characteristics, and cross-section structure of the samples before and after corrosion were systematically analyzed by means of a scanning electron microscope, an energy dispersive spectrometer, and an X-ray diffractometer. The mechanism of high-temperature chlorination corrosion was deduced through thermodynamic and kinetic analysis. The results show that compared with 304 stainless steel, the C276 alloy coating exhibits better corrosion resistance in an extremely high-temperature environment containing HCl, and the average weight gain and growth rate of the corrosion layer were lower. The main corrosion products on the C276 coating surface are Fe₂O₃, FeO, FeCl₂, NiO, and Cr₂O₃, among which the oxides of Ni and Cr form a continuous and dense protective oxide layer that effectively inhibits the intrusion of corrosive media. The high-temperature HCl corrosion follows the ‘chlorination–oxidation’ cycle mechanism, and Cl₂ plays a catalytic role in the reaction and accelerates the corrosion process. Full article

Stormwater runoff represents a significant vector for the transport of organic pollutants and pathogens into aquatic ecosystems, posing serious environmental and public health risks. Although extensively employed for bank stabilization, traditional gabion structures demonstrate constrained efficacy in pollutant removal. In this study, an enhanced ecological gabion (EG) system was developed by integrating a stratified configuration of functional fillers (ceramsite, maifanite, and biochar) with vegetation (Iris germanica). This design leverages synergistic effects to enhance the concurrent removal of dissolved organic matter (DOM), particulate organic matter (POM), and fecal indicator bacteria (FIB) from simulated stormwater. The system was evaluated in continuous flow experiments through comparison with a traditional gravel gabion (TG). Results showed that, compared with the TG, the EG exhibited markedly enhanced removal performance, with chemical oxygen demand (COD), NH₄⁺–N, and TN removal efficiencies being approximately 2.48, 3.68, and 3.56 times those of the TG, respectively. In addition, the EG exhibited significantly higher removal efficiencies for both particulate organic carbon (POC) and dissolved organic carbon (DOC) than the TG, with increases of 329% and 137%, respectively. Fluorescence spectroscopy and particle size distribution analyses revealed that the EG effectively transformed and removed diverse DOM components and fine particulates. The stratified filler media synergistically enhanced pollutant retention, with biochar serving as the primary agent for nutrient and pathogen adsorption. These findings demonstrate the viability of the EG as an integrated, eco-friendly solution for enhanced stormwater purification in riparian zones, providing a compact and multifunctional alternative to conventional end-of-pipe systems. Full article

The borehole-to-surface electromagnetic (BSEM) method is widely employed in oil and gas exploration and downhole monitoring. However, the strength of the ground observation signals of the BSEM method is affected by the metal steel casing in the well. To investigate the response characteristics of the BSEM method under metal casing conditions, this study performed three-dimensional BSEM forward modeling based on a cylindrical grid. The finite volume method was adopted to discretize and solve the governing equations of the electromagnetic field, and the cylindrical grid was partitioned in accordance with the axisymmetric geometric features of the wellbore-casing system, thereby achieving high-precision adaptation to the well structure. To explore the impact of metal casing in an alternating electromagnetic field, four typical models were established: a linear source, a long metal wire, a metal casing, and a casing with a cement sheath. The characteristics of ground signals under low-frequency alternating emission conditions were systematically studied. By comparing the simulation results with the 1D analytical solution, this method was verified to have high numerical accuracy, which can accurately reflect the responses of a metal casing and multiple media interfaces to the alternating electromagnetic field. Based on comparative analysis, the differences in underground electromagnetic field distributions among different source models and their applicable ranges were clarified, and the applicable scenarios and effective detection depths of different models in actual monitoring were explored. This research provides numerical simulation cases to investigate the role of metal casings in BSEM observations, and also lays a theoretical foundation for the interpretation of downhole electromagnetic data, which is of positive significance for improving the effect of applying BSEM technology in oil and gas exploration. Full article

This in vitro study assessed the impact of coconut milk, cow milk, and soybean oil on the surface roughness (Ra) of two milled (polymer-infiltrated ceramic network (PICN), Vita Enamic (EN) and resin nanoceramic (RNC), Cerasmart (CS)) and 3D-printed (VarseoSmile Crown plus (VS)) hybrid resin–ceramic materials. Standardized rectangular specimens were prepared and subjected to cyclic immersion in the test media at 37 °C for 30 days to simulate dietary exposure. Surface roughness was measured pre- and post-aging, and statistical analysis was performed using two-way ANOVA and paired t-tests (α = 0.05). All media significantly increased Ra across all materials (p < 0.001). While coconut milk and soybean oil caused comparable roughening (Ra up to 0.155 µm), cow milk exhibited a material-specific impact. It roughened milled materials (EN and CS) (Ra: 0.147–0.154 µm) significantly more than the 3D-printed material (VS) (Ra: 0.126 µm) (p < 0.05). Notably, all post-aging Ra values remained below the clinical bacterial adhesion threshold of 0.2 µm. In conclusion, while all tested dietary media significantly degraded the surface topography of hybrid resin–ceramics, the 3D-printed hybrid resin–ceramic material demonstrated superior resistance to cow milk compared to milled alternatives. Nonetheless, plaque retention risks remain clinically acceptable for all tested materials. Full article

Text-to-video (T2V) generation has recently emerged as a transformative technology within the field of generative AI, enabling the creation of realistic, temporally coherent videos based on natural language descriptions. This paradigm provides significant added value in many domains such as creative media, human-computer interaction, immersive learning, and simulation. Despite its growing importance, systematic discussion of T2V is still limited compared with adjacent modalities such as text-to-image and image-to-video. To alleviate the scarcity of discussions in the T2V field, this paper provides a systematic review of works published from 2024 onward, consolidating fragmented contributions across the field. We survey and categorize the selected literature into three principal areas—namely, T2V methods, datasets, and evaluation practices—and further subdivide each area into subcategories that reflect recurring themes and methodological patterns in the literature. Emphasis is then placed on identifying key research opportunities and open challenges that need further investigation. Full article

Tourism is increasingly shaped by visual experiences of place mediated through television series and audiovisual fiction. Although film-induced tourism research has widely examined how media representations influence destination image and tourist responses, limited attention has been given to the perceptual and cognitive processes through which mediated landscapes are visually attended to and mentally organised, particularly from a neuroaesthetic perspective focused on early perceptual and attentional mechanisms in fictional contexts where tourism is not explicit. Addressing this gap, this study adopts a process-oriented neuroaesthetic approach to examine how landscapes in the television series Killing Eve are visually attended to and cognitively processed as destination imagery. An exploratory mixed-methods design combined qualitative content analysis of free recall responses (n = 260) with simulated visual attention modelling based on low-level visual features. The findings reveal a two-stage process of mediated landscape experience: visual attention initially guided by perceptual salience, followed by the selective cognitive stabilisation of certain elements as destination imagery through recall, imagination and narrative association. The study demonstrates that mediated landscapes are not processed as holistic destination images, but as selectively organised and emotionally inflected elements emerging from the interaction between visual attention and imagery processes. Full article

Persimmon polyphenols (PP) are natural polyphenols with high reactivity and strong deodorization potential; however, their practical application in odor control is limited by their poor solubility. In this study, natural deep eutectic solvents (NADESs) were employed for the green extraction of PP, and the capabilities of extracts on the removal of ammonia (NH₃) and hydrogen sulfide (H₂S) were investigated. In addition, the underlying mechanisms were explored by integrating spectroscopic analysis, molecular dynamics simulations, and quantum chemical calculations. The results showed that chloride-citric acid (CC-CA) was the optimal system in both PP extraction and sustained NH₃ removal, while the betaine-urea (B-U) system was more effective for H₂S removal. NH₃ removal was governed by acid-base neutralization, with the resulting ammonium species being further stabilized within the PP-regulated NADES hydrogen-bond network. In contrast, H₂S interacted with the solvent network not only through acid-base neutralization but also via Van der Waals forces and hydrophobic contacts. Our data supported that NADESs enhanced the deodorization performance of PP through cooperative microenvironment regulation rather than irreversible chemical conversion. This work highlighted that NADESs could not only function as highly efficient extraction media for polyphenols, but also active platforms for enhancing selective gas-capture capability for polyphenols. Furthermore, it provided a new strategy for the rational design of green, persimmon-derived deodorants. Full article

Compared with previous analytical designs for deep UBHE, the present study is new in three aspects: (1) a segmented FLS model combined with the virtual heat source method is applied to the full U-shaped path (injection, horizontal, and production wells) in a unified formulation; (2) equivalent thermal conductivity is introduced to account for groundwater seepage in porous media, avoiding the need for separate CFD or coupled numerical solvers; (3) the relationship between production well depth and the maximum effective insulation length is quantified and discussed. Deep U-shaped borehole heat-exchangers (UBHE) systems boast high heat-exchange efficiency, yet most analytical models are too simplistic, causing inaccuracies. This study proposes a segmented finite line source (FLS) model for UBHE using the virtual heat source method. Introducing equivalent thermal conductivity (k_equ), it treats rock-soil as a groundwater-saturated porous medium, coupling seepage’s dynamic heat-transfer impact. By comparing the simulation results of the same type of research within 720 h, the average temperature difference between the models was found to be 1.31 °C, with an error rate of 5.31%, which is 40.87 percentage points lower than the existing achievements, thereby demonstrating the accuracy of this model. In addition, based on this model, the influence trends of five main factors such as seepage velocity and geothermal gradient on the system’s heat exchange were drawn and analyzed. Among them, the laying length of the insulation layer was analyzed in detail. The results show that its maximum laying length should be in line with the depth node where reverse heat exchange occurs with the production well. Under the set conditions of this study, when the depth of the production well is 2500 m, the maximum laying length of the insulation layer is 1900 m. Full article

Scale-up synthesis in doped semiconductor metal oxide plasmonic nanocrystal batch reaction dispersion mixture processes often leads to significant changes in rheological behavior and flow characteristics, especially when using high-viscosity organic media. In this study, the rheological and hydrodynamic properties during the scale-up of a nanocrystal dispersion system where oleyl alcohol was used as a reaction solution medium were investigated. The flow field in a mechanically stirred 4 L pilot reactor was numerically analyzed using ANSYS Fluent based on experimentally obtained viscosity and density data of oleyl alcohol. At 290 °C, coincident with the nucleation and growth of plasmonic-doped metal oxide nanocrystals, solvent viscosity decreases to a corresponding Reynolds number of 9.2 × 10⁵, indicating that the dramatic viscosity reduction in oleyl alcohol above synthetic temperature batch reaction conditions drives a sharp increase in Reynolds number into a strongly turbulent mixing regime at synthetically relevant temperatures. The simulation results revealed that the scale-up process induces notable variations in shear rate distribution, local turbulence intensity, and overall mixing efficiency. These findings suggest that understanding rheological transitions under scale-up conditions is essential for optimizing nanoparticle synthesis and dispersion uniformity in industrial applications. Full article

To investigate the influence of humus on the corrosion behavior of high-tin bronze in soil environments, potentiostatic polarization was applied to simulate early-stage corrosion under controlled conditions. Open-circuit potential and potentiodynamic polarization tests were performed, and corrosion products were characterized by stereo microscopy, SEM-EDS, and confocal Raman spectroscopy. A Cu–Sn–Pb ternary alloy was examined in simulated archaeological soil solutions with selective humus addition at different pH values. A bilayer structure, consisting of a secondary corrosion layer and a semi-corroded transition zone, developed in all media, with more extensive corrosion under weakly acidic conditions. In acidic environments, humus enhanced preferential α-phase corrosion, associated with copper depletion and tin enrichment as SnO₂. Under weakly alkaline conditions, humus mainly affected surface color and micro-morphology without altering the overall corrosion pattern. Electrochemical testing reproduced corrosion layer structures similar to those formed during early burials, but differences in morphology were observed. The results suggest that, as an accelerated corrosion technique, electrochemical methods can reproduce key features of early-stage corrosion in high-tin bronze and serve as an effective tool for monitoring corrosion behavior. Full article

Biopolymers are increasingly explored as safer and more sustainable food packaging materials. This study evaluated the migration behavior of intentionally and non-intentionally added substances (IAS and NIAS), as well as the safety of gelatin and xanthan gum blends reinforced with microcrystalline cellulose, with and without oxygen plasma treatment, incorporating glycerol and limonene as plasticizers. Migration tests were conducted according to European Union (EU) Regulation No. 10/2011 using simulants of different polarities, and IAS/NIAS were analyzed by gas chromatography–mass spectrometry and ultra-high-pressure liquid chromatography–quadrupole time-of-flight mass spectrometry (GC–MS and UPLC-QTOF-MS). Films containing limonene were also evaluated for antioxidant activity. Results showed that plasticizer migration is strongly influenced by simulant polarity, glycerol predominantly migrated into hydrophilic media, whereas limonene and its derivatives exhibited higher migration in fatty simulants. Ethanol 95% acted as a conservative worst-case simulant, promoting extensive migration, while substantially lower migration levels were observed in isooctane and tenax plasma treatment resulted in modest changes in volatile compound migration, while significantly enhancing the antioxidant activity of limonene-containing films. Although overall migration levels were low under most of the tested conditions, NIAS formation, particularly from limonene degradation, highlights the need to account for chemical stability and simulant type when assessing bio-based films. Overall, the study demonstrates that film composition, surface modification, and simulant characteristics jointly influence migration behavior and functional performance under the evaluated conditions reinforcing the need to adapt current regulatory frameworks to the specific behavior of biopolymeric packaging materials. Full article