Search Results (1,464)

We present a curated, openly accessible dataset of 71 regional meteor events simultaneously recorded by optical and infrasound instrumentation between 2006 and 2011. These events were captured during an observational campaign using the all-sky cameras of the Southern Ontario Meteor Network and the co-located Elginfield Infrasound Array. Each entry provides optical trajectory measurements, infrasound waveforms, and atmospheric specification profiles. The integration of optical and acoustic data enables robust linkage between observed acoustic signals and specific points along meteor trajectories, offering new opportunities to examine shock wave generation, propagation, and energy deposition processes. This release fills a critical observational gap by providing the first validated, openly accessible archive of simultaneous optical–infrasound meteor observations that supports trajectory reconstruction, acoustic propagation modeling, and energy deposition analyses. By making these data openly available in a structured format, this work establishes a durable reference resource that advances reproducibility, fosters cross-disciplinary research, and underpins future developments in meteor physics, atmospheric acoustics, and planetary defense. Full article

This work presents an end-to-end encryption–decryption framework for securing electromagnetic signals processed through a nanoantenna. The system integrates amplitude normalization, uniform quantization, and Reed–Solomon forward error correction with key establishment via ECDH and bitwise XOR encryption. Two signal types were evaluated: a synthetic Gaussian pulse and a synthetic voice waveform, representing low- and high-entropy data, respectively. For the Gaussian signal, reconstruction achieved an RMSE = 11.42, MAE = 0.86, PSNR = 26.97 dB, and Pearson’s correlation coefficient = 0.8887. The voice signal exhibited elevated error metrics, with an RMSE = 15.13, MAE = 2.52, PSNR = 24.54 dB, and Pearson correlation = 0.8062, yet maintained adequate fidelity. Entropy analysis indicated minimal changes between the original signal and the reconstructed signal. Furthermore, avalanche testing confirmed strong key sensitivity, with single-bit changes in the key altering approximately 50% of the ciphertext bits. The findings indicate that the proposed pipeline ensures high reconstruction quality with lightweight encryption, rendering it suitable for environments with limited computational resources. Full article

Non-contact vital signs detection of the survivors based on bio-radar to identify their life states is significant for field search and rescue. However, when transportation is interrupted, rescue workers and equipment are unable to arrive at the disaster area promptly. In this paper, we report a hovering airborne radar for non-contact vital signs detection to overcome this challenge. The airborne radar system supports a wireless data link, enabling remote control and communication over distances of up to 3 km. In addition, a novel framework based on blind source separation is proposed for vital signals extraction. First, range migration caused by the platform motion is compensated for by the envelope alignment. Then, the respiratory waveform of the human target is extracted by the joint approximative diagonalization of eigenmatrices algorithm. Finally, the heartbeat signal is recovered by respiratory harmonic suppression through a feedback notch filter. The field experiment results demonstrate that the proposed method is capable of precisely extracting vital signals with outstanding robustness and adaptation in more cluttered environments. The work provides a technical basis for remote high-resolution vital signs detection to meet the increasing demands of actual rescue applications. Full article

Continuous cardiovascular monitoring is essential for the early detection of cardiac events, but conventional electrode-based ECG systems cause skin irritation and are unsuitable for long-term wear. We propose an electrode-free ECG monitoring approach that leverages synchronized phonocardiogram (PCG) and seismocardiogram (SCG) signals captured by wireless mechano-acoustic sensors. PCG provides precise valvular event timings, while SCG provides mechanical context, enabling the robust identification of systolic/diastolic intervals and pathological patterns. A deep learning model reconstructs ECG waveforms by intelligently combining mechano-acoustic sensor data. Its architecture leverages specialized neural network components to identify and correlate key cardiac signatures from multimodal inputs. Experimental validation on an IoT sensor dataset yields a mean Pearson correlation of 0.96 and an RMSE of 0.49 mV compared to clinical ECGs. By eliminating skin-contact electrodes through PCG–SCG fusion, this system enables robust IoT-compatible daily-life cardiac monitoring. Full article

The advancement of sensor technologies enables the measurement of high-quality continuous blood pressure signals, which has become an important area in healthcare. The development of such application-specific sensors can be time-consuming, expensive, and difficult to test or validate with known and consistent waveforms. In this manuscript, an open-source blood pressure waveform simulator with a Python validation package is described. The core part, a 3D-printed cam, can be generated based on real blood pressure waveforms. The validation software framework compares in detail the waveform used to design the cam with the time series from the sensor being validated. The simulator was validated using a 3D force sensor. The RMSE of accuracy was 1.94 (44)–2.74 (63)%, and the Pearson correlation with the nominal signal was 99.84 (13)–99.39 (18)%. As for precision, the RMSE of the repeatability of cam rotations was 1.53 (71)–2.13 (116)% and the Pearson correlation was 99.85 (16)–99.59 (57)%. The presented simulator proved to be robust and accurate in short- and long-term use, as it produced the signal waveform reliably and with high fidelity. It reduces development costs for early-stage sensor development and research, offering a solution that is easy to manufacture yet capable of continuously outputting human arterial blood pressure waveforms spanning multiple consecutive cardiac cycles. Full article

While calcium (Ca²⁺) is a universal cellular messenger, the ionic properties of magnesium (Mg²⁺) make it less suited for rapid signaling and more for structural integrity. Still, besides being a passive player, Mg²⁺ is the only active Ca²⁺ antagonist, essential for tuning the efficacy of Ca²⁺-dependent cardiac excitation–contraction coupling (ECC) and for ensuring cardiac function robustness and stability. This review aims to provide a comprehensive framework to link the structural and molecular mechanisms of Mg²⁺/Ca²⁺ antagonistic binding across key proteins of the cardiac ECC machinery to their physiopathological relevance. The pervasive “dampening” effect of Mg²⁺ on ECC activity is exerted across various players and mechanisms, and lies in the ions’ physiological competition for multiple, flexible binding protein motifs across multiple compartments. Mg²⁺ profoundly modulates the cardiac action potential waveform by inhibiting the L-type Ca²⁺ channel Cav1.2, i.e., the key trigger of cardiac ryanodine receptor (RyR2) opening. Cytosolic Mg²⁺ favors RyR2 closed or inactive conformations not only through physical binding at specific sites, but also indirectly through modulation of RyR2 phosphorylation by Camk2d and PKA. RyR2 is also potently inhibited by luminal Mg²⁺, a vital mechanism in the cardiac setting for preventing excessive Ca²⁺ release during diastole. This mechanism, able to distinguish between Ca²⁺ and Mg²⁺, is mediated by luminal partners Calsequestrin 2 (CASQ2) and Triadin (TRDN). In addition, Mg²⁺ favors a rearrangement of the RyR2 cluster configuration that is associated with lower Ca²⁺ spark frequencies. Full article

Despite the widespread adoption of high-frequency electromagnetic wave (HF-EMW) processing, deep neural networks (DNNs) remain primarily black boxes. Interpreting the semantics behind the high-dimensional representations of a DNN is quite crucial for getting insights into the network. This study has proposed an evidential representation fusion approach that interprets the high-dimensional representations of a DNN as HF-EMW semantics, such as time- and frequency-domain signal features and their physical interpretation. In this approach, an evidential discrete model based on Dempster–Shafer theory (DST) converts a subset of DNN representations to mass function reasoning on a class set, indicating whether the subset contains HF-EMW semantics information. An interpretable continuous DST-based model maps the subset into HF-EMW semantics via representation fusion. Finally, the two DST-based models are extended to interpret the learning processes of high-dimensional DNN representations. Experiments on the two datasets with 2680 and 4000 groups of HF-EMWs demonstrate that the approach can find and interpret representation subsets as HF-EMW semantics, achieving an absolute fractional output change of 39.84% with an 10% removed elements in most important features. The interpretations can be applied for visual learning evaluation, semantic-guided reinforcement learning with an improvement of 4.23% on classification accuracy, and even HF-EMW full-waveform inversion. Full article

To address the challenges of signal recognition and prediction in intelligent sliding sleeve downlink communication systems, this paper proposes a dual-model framework based on Long Short-Term Memory (LSTM) networks. The system comprises a classifier for identifying pressure wave edge types and a generator for predicting pressure waveforms. High-quality training data are generated by simulating pressure wave propagation caused by throttle valve modulations. A sliding window strategy and Z-score normalization are applied to enhance temporal modeling. The classifier achieves a high accuracy in identifying rising and falling edges under noise-free conditions. The generator, trained on down-sampled waveform segments, accurately reconstructs pressure dynamics using a dual-input strategy based on historical segments and hypothetical labels. A residual-based decision mechanism is employed to complete the full sequence label prediction. To evaluate robustness, noise intensities of 30 dB and 40 dB are introduced. The proposed system maintains high performance under both conditions, achieving label prediction accuracies of 100%. Error metrics such as MAE and RMSE remain within acceptable bounds, even in noisy environments. The results demonstrate that the proposed LSTM-based method has been validated on simulated data, showing its potential to approximate performance in real-world conditions. It provides a promising solution for cable-free measurement-while-drilling (MWD) and remote control of intelligent sliding sleeves in complex downhole environments. Full article

This study delves into the response characteristics of core grounding current signals in power transformers across different operating conditions, aiming to enhance the accuracy of transformer condition assessment. Existing detection technologies often rely on single-parameter methods, which fall short in providing a comprehensive evaluation of transformer conditions. To address this limitation, this research develops a wideband circuit model based on multi-conductor transmission line theory and backed by experimental validation. The model systematically investigates the response mechanisms of core grounding current to various electrical stresses, including impulse voltages, power-frequency harmonics, and partial discharges. The findings reveal distinct response characteristics of core grounding current under different stresses. Under impulse voltage excitation, the core current exhibits high-frequency oscillatory decay with characteristics linked to voltage waveform parameters. In harmonic conditions, the current spectrum shows linear correspondence with excitation voltages, with no resonance below 1 kHz. Partial discharges induce high-frequency oscillations in the grounding current due to multi-resonant networks formed by distributed winding-core parameters. This study establishes a new theoretical framework for transformer condition assessment based on core grounding current analysis, offering critical insights for optimizing detection technologies and overcoming the limitations of traditional methods. Full article

This paper presents a blind source separation (BSS)-based framework for joint communication and sensing (JCAS) in in-band full-duplex (IBFD) multiple-input multiple-output (MIMO) systems operating under time-varying channel conditions. Conventionally, self-interference (SI) in IBFD systems is a major obstacle to recovering the signal of interest (SOI). Under the JCAS paradigm, however, this high-power SI signal presents an opportunity for efficient sensing. Since each transceiver node has access to the original SI signal, its environmental reflections can be exploited to estimate channel conditions and detect changes, without requiring dedicated radar waveforms. We propose a blind source separation (BSS)-based framework to simultaneously perform self-interference cancellation (SIC) and extract sensing information in IBFD MIMO settings. The approach applies the Fast Independent Component Analysis (FastICA) algorithm in dynamic scenarios to separate the SI and SOI signals while enabling simultaneous signal recovery and channel estimation. Simulation results quantify the trade-off between estimation accuracy and channel dynamics, demonstrating that while FastICA is effective, its performance is fundamentally limited by a frame size optimized for the rate of channel variation. Specifically, in static channels, the signal-to-residual-error ratio (SRER) exceeds 22 dB with 500-symbol frames, whereas for moderately time-varying channels, performance degrades significantly for frames longer than 150 symbols, with SRER dropping below 4 dB. Full article

Subway train operators face the risk of cumulative cognitive stress due to factors such as visual fatigue from prolonged high-speed tunnel driving, irregular shift patterns, and the monotony of automated operations. This can lead to cognitive decline and human error accidents. Current monitoring of cognitive stress risk predominantly relies on single-modal methods, which are susceptible to environmental interference and offer limited accuracy. This study proposes an intelligent multimodal framework for cognitive stress monitoring by leveraging the symmetry principles in physiological and behavioral manifestations. The symmetry of photoplethysmography (PPG) waveforms and the bilateral symmetry of head movements serve as critical indicators reflecting autonomic nervous system homeostasis and cognitive load. By integrating these symmetry-based features, this study constructs a spatiotemporal dynamic feature set through fusing physiological signals such as PPG and galvanic skin response (GSR) with head and facial behavioral features. Furthermore, leveraging deep learning techniques, a hybrid PSO-CNN-GRU-Attention model is developed. Within this model, the Particle Swarm Optimization (PSO) algorithm dynamically adjusts hyperparameters, and an attention mechanism is introduced to weight multimodal features, enabling precise assessment of cognitive stress states. Experiments were conducted using a full-scale subway driving simulator, collecting data from 50 operators to validate the model’s feasibility. Results demonstrate that the complementary nature of multimodal physiological signals and behavioral features effectively overcomes the limitations of single-modal data, yielding significantly superior model performance. The PSO-CNN-GRU-Attention model achieved a predictive coefficient of determination (R²) of 0.89029 and a mean squared error (MSE) of 0.00461, outperforming the traditional BiLSTM model by approximately 22%. This research provides a high-accuracy, non-invasive solution for detecting cognitive stress in subway operators, offering a scientific basis for occupational health management and the formulation of safe driving intervention strategies. Full article

Defect detection in acoustically matched media remains a significant challenge, particularly when defects, such as fiberglass and polyamide residues, exhibit properties that match those of fiber-reinforced composite laminates as the base material. Techniques, such as through-transmission ultrasound (TTU), often miss subtle residues as defects with the use of conventional amplitude-based TTU detection alone. There is a noticeable research gap in properly identifying such subtle residues in composites using TTU inspection. This study investigated the use of neural networks (NNs) to identify subtle defects in composites based on domain-specific feature extraction from TTU signals. Each signal waveform of each spatial TTU inspection is used as a discrete sample to obtain a larger dataset for each specimen. Domain-specific features were extracted separately from the time, frequency, and wavelet domains, resulting in independent feature vectors to emphasize the signal characteristics. The NN classification used 70% of the overall dataset for training and 30% for testing. Results reveal the features of the time- and frequency domains perform well, achieving macro-F1 scores of 0.96 and 0.97, respectively, while wavelet domain features perform lower with a macro-F1 score of 0.62. Wavelet-domain features perhaps need machine learning methods like recurrent NNs to correctly recognize subtle time-dependent signal variations. Full article

This article presents a novel method for detecting series arc faults (SAFs) in residential applications using time-domain imaging (TDI) and Long Short-Term Memory (LSTM) networks. The proposed method transforms current signals into grayscale images by filtering out the fundamental frequency, allowing key arc fault characteristics—such as high-frequency noise and waveform distortions—to become visually apparent. The use of Ensemble Empirical Mode Decomposition (EEMD) helped isolate meaningful signal components, although it was computationally intensive. To address real-time requirements, a simpler yet effective TDI method was developed for generating 2D images from current data. These images were then used as inputs to an LSTM network, which captures temporal dependencies and classifies both arc faults and appliance types. The proposed TDI-LSTM model was trained and tested on 7000 labeled datasets across five common household appliances. The experimental results show an average detection accuracy of 98.1%, with reduced accuracy for loads using thyristors (e.g., dimmers). The method is robust across different appliance types and conditions; comparisons with prior methods indicate that the proposed TDI-LSTM approach offers superior accuracy and broader applicability. Trade-offs in sampling rates and hardware implementation were discussed to balance accuracy and system cost. Overall, the TDI-LSTM approach offers a highly accurate, efficient, and scalable solution for series arc fault detection in smart home systems. Full article

The proliferation of small, agile unmanned aerial vehicles (UAVs) has exposed the limits of single-sensor surveillance in cluttered airspace. We propose an Internet of Things-enabled integrated sensing and communication (IoT-ISAC) framework that converts cellular base stations into cooperative, edge-intelligent sensing nodes. Within a four-layer design—terminal, edge, IoT platform, and cloud—stations exchange raw echoes and low-level features in real time, while adaptive beam registration and cross-correlation timing mitigate spatial and temporal misalignments. A hybrid processing pipeline first produces coarse data-level estimates and then applies symbol-level refinements, sustaining rapid response without sacrificing precision. Simulation evaluations using multi-band ISAC waveforms confirm high detection reliability, sub-frame latency, and energy-aware operation in dense urban clutter, adverse weather, and multi-target scenarios. Preliminary hardware tests validate the feasibility of the proposed signal processing approach. Simulation analysis demonstrates detection accuracy of 85–90% under optimal conditions with processing latency of 15–25 ms and potential energy efficiency improvement of 10–20% through cooperative operation, pending real-world validation. By extending coverage, suppressing blind zones, and supporting dynamic surveillance of fast-moving UAVs, the proposed system provides a scalable path toward smart city air safety networks, cooperative autonomous navigation aids, and other remote-sensing applications that require agile, coordinated situational awareness. Full article

A single-station lightning location has the obvious advantages of low cost and convenience in lightning monitoring and warning. To address the critical challenge of distance estimation accuracy in this technology, we propose a novel physical time-reversal (PTR) method to utilize the full wave information of both the ground wave and the sky wave in the detected signal. First, we improved the numerical model for accurately calculating the lightning sferics signals in the complex propagation environment of the Earth–ionosphere waveguide using the measured International Reference Ionosphere 2020. Subsequently, the sferics signal with multipath effect is transformed by time reversal and back propagated in the numerical model. Furthermore, a broadening factor reflecting the waveform dispersion in the back propagation is defined as the single-station focusing criterion to determine the optimal lightning propagation distance, considering the multipath effect and the focus of the PTR process. The experimental results demonstrate that the average root mean square error (RMSE) and the mean relative error (MRE) of the PTR method for the lightning distance estimation in the numerical simulation within the range of 100–1200 km are 5.517 km and 1.21%, respectively, and the average RMSE and the MRE for the natural lightning strikes to the Canton Tower from the measured data in the range of 181.643–1152.834 km are 9.251 km and 2.07%, respectively. Moreover, the correlation coefficients of the detection results are all as high as 0.999. These results indicate that the PTR method significantly outperforms the traditional ionospheric reflection method, demonstrating that it is able to perform a more accurate single-station lightning distance estimation by utilizing the compensation mechanism of the multipath effect on the sferics. The implementation of the proposed method has significant application value for improving the accuracy of single-station lightning location. Full article