Search Results (800)

In the context of critical challenges in curcumin-modified polyurethane synthesis—including limited curcumin bioavailability and suboptimal biodegradability/biocompatibility—a novel polyurethane material (Cur-PU) with good mechanical, shape memory, pH-responsive, and biocompatibility was synthesized via a one-pot, two-step synthetic protocol in which HO-PCL-OH served as the soft segment and curcumin was employed as the chain extender. The experimental results demonstrate that with the increase in Cur units, the crystallinity of the Cur-PU material decreases from 32.6% to 5.3% and that the intensities of the diffraction peaks at 2θ = 21.36°, 21.97°, and 23.72° in the XRD pattern gradually diminish. Concomitantly, tensile strength decreased from 35.5 MPa to 19.3 MPa, and Shore A hardness declined from 88 HA to 65 HA. These observations indicate that the sterically hindered benzene ring structure of Cur imposes restrictions on HO-PCL-OH crystallization, leading to lower crystallinity and retarded crystallization kinetics in Cur-PU. As a consequence, the material’s tensile strength and hardness are diminished. Except for the Cur-PU-3 sample, all other variants exhibited exceptional shape-memory functionality, with R_f and R_r exceeding 95%, as determined by three-point bending method. Analogous to pure curcumin solutions, Cur-PU solutions demonstrated pH-responsive chromatic transitions: upon addition of hydroxide ion (OH⁻) solutions at increasing concentrations, the solutions shifted from yellow-green to dark green and finally to orange-yellow, enabling sensitive pH detection across alkaline gradients. Hydrolytic degradation studies conducted over 15 weeks in air, UPW, and pH 6.0/8.0 phosphate buffer solutions revealed mass loss <2% for Cur-PU films. Surface morphological analysis showed progressive etching with the formation of micro-to-nano-scale pores, indicative of a surface-erosion degradation mechanism consistent with pure PCL. Biocompatibility assessments via L929 mouse fibroblast co-culture experiments demonstrated ≥90% cell viability after 72 h, while relative red blood cell hemolysis rates remained below 5%. Collectively, these findings establish Cur-PU as a biocompatible material with tunable mechanical properties, and pH responsiveness, underscoring its translational potential for biomedical applications such as drug delivery systems and tissue engineering scaffolds. Full article

This paper investigates the cultural landscapes established by nineteenth-century German immigrants in South Australia and the southern Riverina of New South Wales, with particular attention to settlement patterns, architectural traditions and toponymic transformation. German immigration to Australia, though numerically modest compared to the Americas, significantly shaped local communities, especially due to religious cohesion among Lutheran migrants. These settlers established distinct, enduring rural enclaves characterized by linguistic, religious and architectural continuity. The paper examines three manifestations of these cultural landscapes. A rich toponymic landscape was created by imposing on natural landscape features and newly founded settlements the names of the communities from which the German settlers originated. It discusses the erosion of German toponyms under wartime nationalist pressures, the subsequent partial reinstatement and the implications for cultural memory. The study traces the second manifestation of a cultural landscapes in the form of nucleated villages such as Hahndorf, Bethanien and Lobethal, which often followed the Hufendorf or Straßendorf layout, integrating Silesian land-use principles into the Australian context. Intensification of land use through housing subdivisions in two communities as well as agricultural intensification through broad acre farming has led to the fragmentation (town) and obliteration (rural) of the uniquely German form of land use. The final focus is the material expression of cultural identity through architecture, particularly the use of traditional Fachwerk (half-timbered) construction and adaptations such as pug-and-pine walling suited to local materials and climate. The paper examines domestic forms, including the distinctive black kitchen, and highlights how environmental and functional adaptation reshaped German building traditions in the antipodes. Despite a conservation movement and despite considerable documentation research in the late twentieth century, the paper shows that most German rural structures remain unlisted and vulnerable. Heritage neglect, rural depopulation, economic rationalization, lack of commercial relevance and local government policy have accelerated the decline of many of these vernacular buildings. The study concludes by problematizing the sustainability of conserving German Australian rural heritage in the face of regulatory, economic and demographic pressures. With its layering of intangible (toponymic), structural (buildings) and land use (cadastral) features, the examination of the cultural landscape established by nineteenth-century German immigrants adds to the body of literature on immigrant communities, settler colonialism and landscape research. Full article

Recent advancements in polymer science have catalyzed a transformative shift in biomedical engineering, particularly through the development of biodegradable and smart polymers. This review explores the evolution, functionality, and application of these materials in areas such as tissue scaffolding, cardiovascular occluders, and controlled drug delivery systems. Emphasis is placed on shape-memory polymers (SMPs), conductive polymers, and polymer-based composites that combine tunable degradation, mechanical strength, and bioactivity. The synergy between natural and synthetic polymers—augmented by nanotechnology and additive manufacturing—enables the creation of intelligent scaffolds and implantable devices tailored for specific clinical needs. Key fabrication methods, including electrospinning, freeze-drying, and emulsion-based techniques, are discussed in relation to pore structure and functionalization strategies. Finally, the review highlights emerging trends, including ionic doping, 3D printing, and multifunctional nanocarriers, outlining their roles in the future of regenerative medicine and personalized therapeutics. Full article

Addressing the urgent need for lightweight and reusable energy-absorbing materials in aviation impact resistance, this study introduces an innovative multi-directional braided metamaterial design enabled by 4D printing technology. This approach overcomes the dual challenges of intricate manufacturing processes and the limited functionality inherent to traditional textile preforms. Six distinct braided structural units (types 1–6) were devised based on periodic trigonometric functions (Y = A sin(12πX)), and integrated with shape memory polylactic acid (SMP-PLA), thereby achieving a synergistic combination of topological architecture and adaptive response characteristics. Compression tests reveal that reducing strip density to 50–25% (as in types 1–3) markedly enhances energy absorption performance, achieving a maximum specific energy absorption of 3.3 J/g. Three-point bending tests further demonstrate that the yarn amplitude parameter A is inversely correlated with load-bearing capacity; for instance, the type 1 structure (A = 3) withstands a maximum load stress of 8 MPa, representing a 100% increase compared to the type 2 structure (A = 4.5). A multi-branch viscoelastic constitutive model elucidates the temperature-dependent stress relaxation behavior during the glass–rubber phase transition and clarifies the relaxation time conversion mechanism governed by the Williams–Landel–Ferry (WLF) and Arrhenius equations. Experimental results further confirm the shape memory effect, with the type 3 structure fully recovering its original shape within 3 s under thermal stimulation at 80 °C, thus addressing the non-reusability issue of conventional energy-absorbing structures. This work establishes a new paradigm for the design of impact-resistant aviation components, particularly in the context of anti-collision structures and reusable energy absorption systems for eVTOL aircraft. Future research should further investigate the regulation of multi-stimulus response behaviors and microstructural optimization to advance the engineering application of smart textile metamaterials in aviation protection systems. Full article

In this work, a finite element modelling methodology is presented for the prediction of the bending behaviour of a glass fibre-reinforced elastomer composite with embedded shape memory alloy (SMA) wire actuators. Three configurations of a multi-layered composite with differences in structural stiffness and thickness are experimentally and numerically analysed. The bending experiments are realised by Joule heating of the SMA, resulting in deflection angles of up to 58 deg. It is shown that a local degradation in the structural stiffness in the form of a hinge significantly increases the amount of deflection. Modelling is fully elaborated in the finite element software ANSYS, based on material characterisation experiments of the composite and SMA materials. The thermomechanical material behaviour of the SMA is modelled via the Souza–Auricchio model, based on differential scanning calorimetry (DSC) and isothermal tensile experiments. The methodology allows for the consideration of an initial pre-stretch for straight-line positioned SMA wires and an evaluation of their phase transformation state during activation. The results show a good agreement of the bending angle for all configurations at the activation temperature of 120 °C reached in the experiments. The presented methodology enables an efficient design and evaluation process for soft robot structures with embedded SMA actuator wires. Full article

Loading and clamping schemes significantly influence the behavior of shape memory alloys, specifically, the course of their solid-state transformations. This paper presents experimental and numerical findings regarding the nonlinear response of samples of the above-mentioned type of smart materials observed during tensile tests. Hysteretic properties were studied to elucidate the superelastic behavior of the tested and modeled samples. The conducted tensile tests considered two configurations of grips, i.e., the standard one, where the jaws transversely clamp a specimen, and the customized bollard grip solution, which the authors developed to reduce local stress concentration in a specimen. The characteristic impact of the boundary conditions on the solid phase transformation in shape memory alloys, present due to the specific clamping scheme, was studied using a thermal camera and extensometer. Martensitic transformation and the plateau region in the nonlinear stress–strain characteristics were observed. The results of the numerical simulation converged to the experimental outcomes. This study explains the complex nature of the phase changes in shape memory alloys under specific boundary conditions induced by a given clamping scheme. In particular, variation in the martensitic transformation course is identified as resulting from the stress distribution observed in the specimen’s clamping area. Full article

The incorporation of advanced smart materials, such as shape memory alloys (SMAs), in civil engineering presents significant challenges, particularly in modeling their complex behavior. Traditional numerical SMA models often require material parameters that are difficult to estimate and validate. The objective of this paper is to introduce an equation-based approach to modeling the superelastic behavior of SMAs based on rheological models. The proposed phenomenological model accurately captures SMA superelasticity under isothermal conditions, with each material parameter directly correlated to data from standard mechanical experiments. Four modifications to the baseline rheological model are proposed, highlighting their impact on superelastic characteristics. The resulting constitutive relationships are expressed as non-linear ordinary differential equations, making them compatible with commercial finite element method (FEM) software through user-defined subroutines. The practical application of this modeling approach is demonstrated through the strengthening of a historical masonry wall subjected to seismic activity. Comparative analysis shows that ties incorporating SMA segments outperform traditional steel ties by reducing the potential damage and enhancing the structural performance. Additionally, the energy dissipation during the SMA phase transformation improves the damping of vibrations, further contributing to the stability of the structure. This study underscores the potential of SMA-based solutions in seismic retrofitting and highlights the advantages of equation-based modeling for practical engineering applications. Full article

Shape Memory Alloy (SMA) actuators are pivotal in modern engineering due to their unique thermomechanical properties, but their inherent non-linearities, hysteresis, and temperature sensitivity pose significant control challenges. This systematic review evaluates artificial intelligence (AI)-based control methodologies to address these limitations, analyzing their efficacy in enhancing precision, adaptability, and reliability for SMA and Magnetic SMA (MSMA) systems. A PRISMA-guided literature review (2003–2025) identified 24 studies, which were categorized by control architectures (hybrid AI-linear, pure AI, adaptive, and model predictive control) and evaluated through quantitative metrics, including Root Mean Square Error (RMSE%) and a weighted scoring system for experimental rigor. Results revealed hybrid AI-linear controllers as the dominant approach (36%), with online-trained neural networks achieving superior accuracy (+2.4%) over offline methods. Feedforward neural networks outperformed recurrent architectures (+3.1%), while Model Predictive Control (MPC) excelled for SMA actuators (+5.8% accuracy) but underperformed for MSMAs (−7.7%). Sensorless strategies proved advantageous for MSMAs (+5.0%), leveraging intrinsic material properties like electrical resistance for state estimation. The analysis underscores AI’s capacity to mitigate hysteresis and non-linear dynamics, though material-specific optimization is critical: SMA systems favor dynamic control and MPC, whereas MSMAs benefit from sensorless AI and pure neural networks. Challenges persist in computational demands for online training and reinforcement learning’s exploration–exploitation trade-offs. Future research should prioritize adaptive algorithms for fatigue compensation, lightweight AI models for embedded deployment, and standardized benchmarking to bridge material-specific performance gaps. This synthesis establishes AI as a transformative paradigm for SMA actuation, enabling precise control in aerospace, biomedical, and soft robotics applications. Full article

The aim of the work is to analyze the survival strategy of Taxus baccata L., one of the promising plants for landscaping and the creation of woodlands, in the changing ecological conditions of the steppe zone of the Donetsk ridge. In order to achieve this goal, we used biomechanics methods, which help to understand the relationship between the physical and mechanical properties of living tissues and the overall stability of trees during interactions with environmental factors such as temperature, snow and ice storms, cyclic freeze–thaw processes, wind loads, and others. The work was based both on experimental studies on the estimation of the tissue elasticity modulus in response to temperature changes, the mechanical stability of plants, the field collection of materials, and studies on the modeling of forest stand conditions of English yew. As a result of the conducted experiments, it was established for the first time that at the absolute wood moisture content of 77 ± 5.1%, the density of wood tissues in the conditions of Donetsk is 907 ± 43 kg m⁻³. The modulus of elasticity of living tissues depending on the temperature factor varied in the following range: 8.8 ± 0.31 GN m⁻² (T = 288 K), 11.5 ± 0.55 GN m⁻² (T = 255 K) and 6.9 ± 0.47 GN m⁻² (t = 308 K). It was revealed that during the local thawing of skeletal branches and tables, the mechanical resistance of T. baccata is reduced by 20–22% and this critically affects the overall plant resistance. It was established for the first time that T. baccata in the conditions of the steppe zone has an adaptive strategy of preserving the integrity of the organism under the action of environmental factors with limited loads. The secret lies in the formation of the shape memory effect, under the influence of critical loads. The plant, thus, chooses not migration, not death, but adaptation to changes in environmental conditions, which can become a serious factor in the use of T. baccata in the landscaping of urban areas and the creation of artificial forests. Full article

Electrospinning with sequential layer deposition has been reported for various applications such as tissue scaffolds, shape memory materials, and separations. However, the effect of layering on the mechanical properties is not fully understood. In this work, layered structures of thermoplastic polyurethane (TPU) and nylon were selected as a model system to investigate the effect of sequential layer deposition on mechanical properties. Evidence of the layered structure was indicated by scanning electron microscopy (SEM) and Fourier Transform Infrared spectroscopy (FTIR) experiments. Layering TPU with nylon resulted in a 60-fold increase in the Young’s modulus. The Young’s modulus of the layered structure was reasonably predicted by the Voigt rule of mixtures. Furthermore, the Young’s modulus changes without any statistically significant change in elongation at break compared to a single layer of nylon. Thus, the elongation at break was dictated by the stiffer material, despite being present at a lower volume fraction. Overall, electrospinning with sequential layer deposition electrospinning is an effective approach for tuning the mechanical properties and surface chemistry of electrospun materials independently, which may be of interest for applications in tissue engineering and separations. Full article

Biodegradable and bio-based polymers, such as starch and gelatin, are emerging as an important alternative to the use of conventional polymers. In this work, different proportions (1/1, 1/1.5, 1/2, and 1/2.5) of these bio-based polymers will be investigated, with the primary objective of considering their strong moisture dependence as an advantage instead of a problem, as commonly considered. For this interesting challenge, the humidity-activated shape memory effect has been studied in both neat and plasticized starch. Additionally, for the first time, to the best of our knowledge, the shape-memory behavior activated by humidity in gelatin, as well as in starch/gelatin blends, is reported. In all cases, starch, gelatin, and their plasticized blends show excellent values in terms of strain fixity ratio, obtaining values of about 100% in all cases, and strain recovery ratio, with values higher than 90% for the samples studied. Moreover, considering their potential application as food packaging, mechanical response, wettability, water permeability, water uptake rate, and roughness is also studied in this work, taking into account the effect of the different amounts of gelatin on the final behavior of the materials. Full article

Reducing structural mass and volume is critical to improving efficiency and payload capacity in next-generation small satellites and CubeSats. Additive manufacturing, particularly material extrusion, offers design flexibility and enables the production of lightweight, functional metallic components. This study investigates the integration of nickel–titanium shape memory alloy wires into aluminum-based matrices using a sinter-based material extrusion process, aiming to develop compact actuator systems for aerospace applications. A customized AlSi7Mg aluminum alloy feedstock was extruded into filament form, printed, and embedded with shape memory alloy wires, allowing consolidation during sintering. X-ray micro-computed tomography was used to analyze internal defects and matrix–wire interfacial contact, before and after sintering. Tensile testing of the embedded actuator structures revealed effective mechanical bonding and actuation behavior. The results demonstrate that controlled shrinkage and interfacial bonding enable reliable embedding of shape memory elements without compromising structural integrity. This work provides a promising framework for developing multifunctional aerospace components, where active actuation and structural efficiency can be combined through advanced material extrusion-based manufacturing. Full article

Adaptive vehicle control systems are crucial for enhancing safety, performance, and efficiency in modern transportation, particularly as vehicles become increasingly automated and responsive to dynamic environments. This review explores the advancements in bio-inspired actuators and their potential applications in adaptive vehicle control systems. Bio-inspired actuators, which mimic natural mechanisms such as muscle movement and plant tropism, offer unique advantages, including flexibility, adaptability, and energy efficiency. This paper categorizes these actuators based on their mechanisms, focusing on shape memory alloys, dielectric elastomers, ionic polymer–metal composites, polyvinylidene fluoride-based electrostrictive actuators, and soft pneumatic actuators. The review highlights the properties, operating principles, and potential applications for each mechanism in automotive systems. Additionally, it investigates the current uses of these actuators in adaptive suspension, active steering, braking systems, and human–machine interfaces for autonomous vehicles. The review further outlines the advantages of bio-inspired actuators, including their energy efficiency and adaptability to road conditions, while addressing key challenges like material limitations, response times, and integration with existing automotive control systems. Finally, this paper discusses future directions, including the integration of bio-inspired actuators with machine learning and advancements in material science, to enable more efficient and responsive adaptive vehicle control systems. Full article

Across the centuries, trees have been recognised as one of the oldest lifeforms on earth, witnessing and subject to the passage of time on a scale that far exceeds human life, telling us who we are in the world. This paper explores the intricate nature of human interactions with trees across a broad chronological and conceptual range, and the cultural, symbolic, and ecological meaning of “iconic” trees, drawing upon a selection of case studies to explore and analyse the relationship between the tree as a living organism and its cultural, textual, and mnemonic meaning. In conducting this, it reflects upon the cultural geographies of presence and absence, and the role of emblematic trees as places of memory and structures of belief. The relationship between human life and the life of trees is shown to be symbiotic; multiple cultural values and symbolic forms are ascribed to trees, and those same trees shape the physical, ecological, and human environment. The social and cultural construction of the landscape and sites of memory is presented as a key component in the formation of narratives and mentalities that define the relationship between humans and iconic trees, material and imagined. Physical, ecological, and cultural erosion, it is suggested, have the capacity of memorialising forgetfulness and creating a space in which the absence of presence and the presence of absence co-exist. The iconic image of the fallen tree, in its presence and absence, exposes the extent to which trees are also human objects, constructed and understood in human terms, and subject to a range of personal, political, and pragmatic impulses. A tree can be iconic not simply because of what it was but because of what it was believed to be, integrating a physical, historical, memory, and ecological or cultural space into our relationship with the natural world. Full article

With the worldwide spread of clear aligner treatment (CAT), a plethora of new thermoplastics is currently commercially available on the market, claiming to have superior properties and greater comfort. This review aims to summarise the properties of the materials and their effects on treatment effectiveness and comfort to ease material selection and also incorporate new emerging trends such as shape memory polymers (SMPs) and direct 3D printer aligners. First, a concise historical overview of orthodontics will be presented, along with the basic properties of thermoplastics and their importance in treatment. Following the individual properties, we present an analysis of optical, biocompatibility, and toxicity aspects, passing through others such as thermal, mechanical, and special methods to simulate in vivo measurements. We end with the impact of this technique on the environment and the advances and perspectives of CAT. Full article