Search Results (93)

Amine-functionalized polysiloxanes, due to the presence of amino moieties, can be used for the extraction of toxic metal ions from wastewater, as supports for metallic catalysts, stabilizers for metal nanoparticles, macromolecular biocides, or as self-healing materials. In the present work, we studied poly(hydromethylsiloxane) (PHMS) networks functionalized with three amines: N-allyaniline (Naa), N-allylcyclohexylamine (Nach), and N-allylpiperidine (Nap). They were prepared using two procedures. The first one was a two-step process in which the previously cross-linked PHMS was reacted with the amine. The second, one-step method involved simultaneous PHMS cross-linking and reaction with the amine. FTIR and ²⁹Si MAS-NMR spectroscopic investigations, as well as elemental analysis, allowed us to conclude that the one-step method was more advantageous. It ensured higher PHMS networks functionalization degrees and hindered hydrolysis/condensation of Si-H/SiOH groups side processes, which were related to the basicity of the studied amines and significant in the two-step procedure. Full article

In this study, succinoglycan (SG), an anionic exopolysaccharide derived from Sinorhizobium meliloti Rm1021, was chemically modified to introduce boronic acid groups, creating a boronic-acid-functionalized polysaccharide (SG-APBA). The degree of substitution varied from 4.24% to 24.3%, depending on APBA concentration, with SG-APBA 2 identified as the optimal formulation. The properties of SG-APBA were characterized using ¹H NMR, FTIR, TGA, and XRD, along with rheological analysis to assess changes in the polymer’s behavior. The hydrogel, referred to as SAT, was formed through dynamic boronate-ester bonds and hydrogen bonds between SG-APBA and tannic acid (TA). This hydrogel demonstrated excellent injectability, self-healing capacity, and biocompatibility. Incorporation of boronic acid groups allowed the hydrogel to respond to variations in glucose levels and pH, enabling controlled TA release and enhancing its stimulus-responsive antioxidant and antibacterial activities. Antioxidant performance was confirmed through DPPH and ABTS radical scavenging assays, achieving respective activities of 89.8% and 96.4%. Antibacterial effectiveness was validated via inhibition zone tests. Additionally, the SAT hydrogel exhibited dual responsiveness to pH and glucose, with TA release percentages of 55.4% at pH 9.0, 62.7% at pH 7.4, and 69.9% at pH 5.0; and 62.7% at 0 mM glucose, 68.9% at 5 mM, and 72.5% at 25 mM glucose after 120 h. Moreover, combined alterations in pH and glucose triggered a synergistic double-shock effect, markedly accelerating TA release relative to individual stimuli. Overall, these results indicate that the SG-APBA/TA hydrogel has strong potential as a stimuli-responsive platform for drug delivery and biomedical applications. Full article

Dynamic covalent bonds within polymer materials have been the subject of ongoing research. These bonds impart polymers, particularly thermosets, with capabilities for self-healing and reprocessing. Concurrently, three-dimensional (3D) printing techniques have undergone rapid advancement and widespread adoption. Since polymers are among the primary materials used in 3D printing, networks featuring dynamic covalent bonds have emerged as a prominent research area. This review outlines approaches for incorporating dynamic covalent bonds into polymers suitable for 3D printing and examines representative studies that leverage these chemistries in material design. Polymers produced using these strategies demonstrate both self-healing and reprocessability, primarily via bond-exchange (metathesis) reactions. In addition, we discuss how the type and amount of dynamic bonds in the network affect the resulting material properties, with particular emphasis on their mechanical, physical, and thermal performance. In particular, the introduction of dynamic covalent bonds seems to significantly improve the degree of anisotropy, which has been the limitation of 3D printing techniques. Finally, we compile recent applications for objects printed from polymers that include dynamic covalent bonds. Full article

Corneal sequestrum, also known as corneal mummification or necrosis, is a common complication of corneal ulceration in cats, with brachycephalic and pure-bred cats being the most affected. This prospective clinical trial aimed to evaluate the efficacy of self-adhesive, human bandage contact lenses (SHBCLs) versus the commonly used conjunctival transposition flap (CTF) in the management of feline corneal sequestrum. Twenty-five client-owned cats of different breeds with unilateral corneal sequestrum were investigated. All cats underwent a complete ophthalmic examination. Characterization of corneal sequestrum was carried out. The corneal lesion was removed surgically via keratectomy, and the cats were then categorized into three treatment groups: G-SHBCL (10 cats), G-CTF (10 cats), and the control group (G-CO, 5 cats). The healing progress of the corneal defect and associated clinical findings were recorded in all studied groups. Eight out of ten cats (80%) treated with SBCLs showed complete healing of the corneal defect with light corneal scarring and absence of all signs of ocular pain or discomfort. In comparison with G-CTF and G-CO, no granulation tissue was observed in all cats treated with SHBCLs. Moreover, no residues of corneal sequestrum or adhesion were identified, and the degree of corneal clarity was higher in the SHBCL treatment group. In conclusion, application of SHBCLs on a corneal defect, after removal of the associated sequestrum, enhances healing of the cornea and markedly improves the corneal clarity and transparency within a short period. Full article

To explore the influence of waste plastics on the self-healing ability of bitumen, the healing effect of multiple damages, and enlarge the utility of waste plastic in pavement through dynamic shear rheology (DSR) tests, multiple repeated loading tests with fatigue–healing–fatigue as the basic cycle were conducted on modified bitumen samples containing five types of waste plastics (PET, HDPE, PP, PS, and PVC) with different dosages. The damage healing ability of bitumen of the same waste plastic with different dosage ratios and the same dosage of different waste plastics under the same healing time, loading strain, and damage degree through single and multiple loading were explored and analyzed. The results show that based on the three sets of data of the complex shear modulus, phase angle, and fatigue factor, the PS and PVC-modified bitumen have a better recovery performance than that of the other three types of modified bitumen, and the latter also has the best fatigue resistance property. To maximize the improvement effect on the healing index of bitumen, the recommended optimal dosages of PET, HDPE, PP, PS, and PVC are 2%, 2%, 2%, 6%, and 4%, respectively. PS has the best promoting effect on the damage healing ability of bitumen after undergoing multiple damages, while PET has the worst improvement effect. The findings can provide theoretical support and guidance for the wide application of waste plastic-modified bitumen pavement. Full article

The repair efficiency of various self-healing materials often depends on the ability of the prepolymer and curing agent to form mixtures. This paper presents a synthesis and study of the properties of modified self-healing polyurethanes using the Diels–Alder reaction (DA reaction), obtained from a maleimide-terminated preform and a series of furan–urethane curing agents. The most commonly used isocyanates (4,4′-methylene diphenyl diisocyanate (MDI), 2,4-tolylene diisocyanate (TDI), and hexamethylene diisocyanate (HDI)) and furan derivatives (furfurylamine, difurfurylamine, and furfuryl alcohol) were used as initial reagents for the synthesis of curing agents. For comparative analysis, polyurethanes were also obtained using the well-known “traditional” approach—from furan-terminated prepolymers based on mono- and difurfurylamine, as well as furfuryl alcohol and the often-used bismaleimide curing agent 1,10-(methylenedi-1,4-phenylene)bismaleimide (BMI). The structure and composition of all polymers were studied using spectroscopic methods. Molecular mass was determined using gel permeation chromatography (GPC). Thermal properties were studied using TGA, DSC, and TMA methods. The mechanical and self-healing properties of the materials were investigated via a uniaxial tensile test. Visual assessment of the completeness of damage restoration after the self-healing cycle was carried out using a scanning electron microscope. It was shown that the proposed modified approach helps obtain more durable polyurethanes with a high degree of self-healing of mechanical properties after damage. Full article

Thermokinetic characterization of amorphous carbamazepine was performed utilizing non-isothermal differential scanning calorimetry (DSC) and thermogravimetry (TGA). Structural relaxation of the amorphous matrix was described in terms of the Tool–Narayanaswamy–Moynihan model with the following parameters: Δh* ≈ 200–300 kJ·mol⁻¹, β = 0.57, x = 0.44. The crystallization of the amorphous phase was modeled using complex Šesták–Berggren kinetics, which incorporates temperature-dependent activation energy and degree of autocatalysis. The activation energy of the crystal growth was determined to be >320 kJ·mol⁻¹ at the glass transition temperature (T_g). Owing to such a high value, the amorphous carbamazepine is stable at T_g, allowing for extensive processing of the amorphous phase (e.g., self-healing of the quench-induced mechanical defects or internal stress). A discussion was conducted regarding the converse relation between the activation energies of relaxation and crystal growth, which is possibly responsible for the absence of sub-T_g crystal growth modes. The high-temperature thermal decomposition of carbamazepine proceeds via multistep kinetics, identically in both an inert and an oxidizing atmosphere. A complex reaction mechanism, consisting of a series of consecutive and competing reactions, was proposed to explain the second decomposition step, which exhibited a temporary mass increase. Whereas a negligible degree of carbamazepine degradation was predicted for the temperature characteristic of the pharmaceutical hot-melt extrusion (~150 °C), the degradation risk during the pharmaceutical 3D printing was calculated to be considerably higher (1–2% mass loss at temperatures 190–200 °C). Full article

The issues concerning the stability and durability of concrete structures have garnered increasing attention. This study, through theoretical analysis and experimental investigation, explores the application of epoxy resin adhesives in self-healing concrete. A three-point bending test was conducted on the self-healing system, employing C30 concrete as the substrate, with glass double tubes 80 mm in length and 1 mm in wall thickness, possessing an inner diameter of 10 mm, serving as the resin reservoirs, and modified epoxy resins serving as the healing agents. The experimental data indicate that the healing system has a certain degree of strength recovery effect on the concrete matrix, yet the recovery rate is suboptimal, and there are areas for improvement. Furthermore, this paper investigates the optimization of the epoxy resin adhesive formulation and its efficacy in self-healing concrete applications. Full article

The harsh environments in saline–alkaline areas and high-altitude regions with intense ultraviolet radiation pose great challenges to the durability of asphalt pavements. The fatigue performance of asphalt binder significantly determines the actual service life of asphalt pavements. Existing studies have predominantly focused on the impact of individual environmental factors (e.g., aging and saline–alkaline erosion) on asphalt performance, yet there remains a notable research gap in the systematic analysis of asphalt’s fatigue and self-healing behavior under coupled multi-factor interactions, particularly regarding the synergistic effects of UV aging and saline–alkaline conditions. Therefore, it is of great importance to understand the influence rules of the coupling effect of aging and salt–alkaline characteristics on the properties of asphalt materials. In this study, 70# base asphalt and GO-modified asphalt were taken as the research objects. Frequency sweep tests, linear amplitude sweep (LAS) tests, and LAS-based healing tests were conducted using a dynamic shear rheometer. The fatigue and self-healing properties of the two asphalt materials under different aging conditions and aging and salt–alkali coupling effects were analyzed based on the viscoelastic continuum damage theory. The results showed that the degree of aging can increase the stress peak of asphalt materials under small strains and also increase their stress attenuation rate. Except for short-term aging and salt–alkali effects, the aging and salt–alkali coupling effects generally further reduce the stress peaks of asphalt materials. Aging can increase the fatigue life of asphalt and increase the fatigue life attenuation rate of asphalt. The aging and salt–alkali coupling effects will reduce the fatigue life of asphalt and increase the decline rate of the asphalt fatigue life. The self-healing efficiency of asphalt is affected by the degree of aging, and the aging and salt–alkali coupling effects further reduce the self-healing efficiency of asphalt materials. This paper elucidates the influence mechanisms of intense UV irradiation and saline–alkaline environments on GO-modified asphalt, providing theoretical and practical references for its future engineering applications in harsh environmental conditions. Full article

Different polyurethanes (PUs) were synthesized with polycarbonate polyols of molecular weights of 500, 1000, and 2000 Da. Their self-healing abilities at 20 °C were tested, and their structural, thermal, and mechanical properties were analyzed. The PUs made with polycarbonates of molecular weights 500 (YC500) and 1000 Da (YC1000) exhibited self-healing at 20 °C, and the self-healing time of YC1000 was the shortest. The absence of crystallinity and the low degree of micro-phase separation favored self-healing at 20 °C in YC500. However, the presence of tack and the existence of allophanate species and urethane–carbonate and urea–carbonate hydrogen bonds disfavored self-healing. Consequently, the self-healing time at 20 °C of YC500 was longer than expected. On the other hand, YC1000 exhibited an “equilibrium” between urethane-carbonate and urea–carbonate hydrogen bonds and carbonate–carbonate interactions among the soft segments, so a particular structural order was produced that was associated with its fastest self-healing at 20 °C. The PU made with the polycarbonate of molecular weight 2000 Da did not exhibit self-healing at 20 °C because of its significant micro-phase separation, the presence of semi-crystalline soft domains, and the lower density of hydrogen bonds. Full article

In this paper, we generated polarization-independent ring-Airy beams by designing metasurfaces that can realize modulations of both phase and amplitude. In numerical simulation, such metasurfaces are designed by placing subwavelength rectangular slits in Au film uniformly. Two orthogonal types of slits, with orientation angles of 45 and −45 degrees, are used to obtain the binary phase profile in the light transmitted from the metasurface under illumination with either right circular polarization (RCP) or left circular polarization (LCP). This satisfies the phase required for Airy beam generation. Meanwhile, the difference between the phase profile under RCP illumination and that under LCP illumination is right 2π, which can be regarded as the same. This makes the metasurface available to generate Airy beams regardless of incident polarization. We also analyzed the auto-focusing, self-healing, and frequency-response properties of the generated Airy beams with different parameters. This work opens up more opportunities for applications of Airy beams. Full article

To comprehensively understand the impact of various environmental factors on the self-healing process of graphene-modified asphalt, this study employs molecular dynamics simulation methods to investigate the effects of aging degree (unaged, short-term aged, long-term aged), asphalt type (base asphalt, graphene-modified asphalt), healing temperature (20 °C, 25 °C, 30 °C), and damage degree (5 Å, 10 Å, 15 Å) on the self-healing performance of asphalt. The validity of the established asphalt molecular models was verified based on four physical quantities: density, radial distribution function analysis, glass transition temperature, and cohesive energy density. The simulated healing time for the asphalt crack model was set to 200 ps. The following conclusions were drawn based on the changes in density, mean square displacement, and diffusion coefficient during the simulated healing process under different influencing factors: Dehydrogenation and oxidation of asphalt molecules during the aging process hinder molecular migration within the asphalt crack model, resulting in poorer self-healing performance. As the service life increases, the decline in the healing performance of graphene-modified asphalt is slower than that of base asphalt, indicating that graphene-modified asphalt has stronger anti-aging properties. When the vacuum layer in the asphalt crack model is small, the changes in the diffusion coefficient are less pronounced. As the crack width increases, the influence of various factors on the diffusion coefficient of the asphalt crack model becomes more significant. When the crack width is large, the self-healing effect of asphalt is more dependent on these influencing factors. Damage degree and oxidative aging have a more significant impact on the healing ability of graphene-modified asphalt than healing temperature. Full article

As a green and low-carbon road material, warm-mix rubber asphalt (WMRA) has received extensive attention from scholars for its road performance. In the in-depth study of its properties, the fatigue characteristics of WMRA are particularly critical. However, in current studies on asphalt fatigue performance, its self-healing ability is often underestimated or neglected. Furthermore, the simplified viscoelastic continuum damage theory (S-VECD), with its accuracy, speed, and convenience, provides a powerful tool for analyzing asphalt fatigue performance. Therefore, to analyze the fatigue and self-healing performances of WMRA in practical applications, four sample materials were selected in this study: virgin asphalt mastic (VAM), rubber asphalt mastic (RAM), Sasobit rubber asphalt mastic (SRAM), and Evotherm rubber asphalt mastic (ERAM). Subsequently, the samples were subjected to a comprehensive experimental design with frequency sweep tests, linear amplitude sweep tests, and multiple intermittent loading time sweep tests under different aging conditions. The fatigue and self-healing performances of different aging degrees and different types of WMRA were evaluated based on the S-VECD theory. The results show that aging reduces the fatigue and self-healing performances of asphalt mastic to a certain extent, and at a 7% strain, the fatigue life of SRAM after long-term aging is only 30.7% of the life of the unaged sample. The greater the aging degree, the more pronounced the effect. Under different aging levels, the warm-mix agent can significantly improve the fatigue and self-healing performances of rubber asphalt mastic. After undergoing ten fatigue intermittent loading tests, the recovery rate of the complex shear modulus for the long-term aged VAM was 0.65, which is lower than that of SRAM under the same conditions, and the warm mix can further extend the fatigue life of rubber asphalt by improving the self-healing properties of the asphalt. The role of Sasobit in enhancing the fatigue and self-healing performances of rubber asphalt mastic is more significant. This study can provide a theoretical basis for the promotion and application of WMRA pavements and contribute to the sustainable development of road construction. Full article

To achieve a hierarchical and quantitative evaluation of grid-wide power quality in the distribution network, reflecting the overall power quality level of the distribution network, a comprehensive evaluation method for power quality in a grid-wide system based on complex network theory is proposed. Firstly, based on the propagation characteristics of power quality disturbances, a power quality evaluation index system is constructed. Secondly, to reflect the constraint effect of the local power quality level of nodes on the overall power quality level of the distribution system, corresponding indices such as improved node degree, improved node electrical betweenness, and node self-healing capability are proposed based on complex network theory, and the power quality influence degree of nodes is calculated. Then, the GRA-ANP (Grey Relational Analysis–Analytic Network Process) subjective weight calculation method is improved by introducing grey relational analysis to address the impact of differences in different decision-making results. Based on power quality monitoring data, the entropy weight method is used for objective weighting. To avoid the partiality of a single weight evaluation result, the game equilibrium algorithm is employed to calculate the comprehensive weight of each power quality index. Subsequently, considering the correlation and dependency among indices, the VIKOR (VIseKriterijumska Optimizacija I Kompromisno Resenje) method is used to obtain the power quality grade of each node. Combining this with the calculation of the power quality influence degree of nodes, the overall power quality grade of the distribution network is determined, achieving a hierarchical and quantitative evaluation of power quality in the entire distribution system. Finally, through a case study analysis of an improved 13-node distribution network, it is verified that the proposed method can fully extract data information and produce comprehensive and accurate power quality assessment results by comparing it with other methods. This provides strong support for the safe and stable operation of the distribution system and the subsequent optimization and management of power quality. Full article

This article demonstrates scalable production of liquid metal (LM)-based microwires through the thermal drawing of extrudates. These extrudates were first co-extruded using a eutectic alloy of gallium and indium (EGaIn) as a core element and a thermoplastic elastomer, styrene–ethylene/butylene–styrene (SEBS), as a shell material. By varying the feed speed of the co-extruded materials and the drawing speed of the extrudate, it was possible to control the dimensions of the microwires, such as core diameter and shell thickness. How the extrusion temperature affects the dimensions of the microwire was also analyzed. The smallest microwire (core diameter: 52 ± 14 μm and shell thickness: 46 ± 10 μm) was produced from a drawing speed of 300.1 mm s⁻¹ (the maximum attainable speed of the apparatus used), SEBS extrusion speed of 1.50 mm³ s⁻¹, and LM injection rate of 5 × 105 μL s⁻¹ at 190 °C extrusion temperature. The same extrusion condition without thermal drawing generated significantly large extrudates with a core diameter of 278 ± 26 μm and shell thickness of 430 ± 51 μm. The electrical properties of the microwires were also characterized under different degrees of stretching and wire kinking deformation which proved that these LM-based microwires change electrical resistance as they are deformed and fully self-heal once the load is removed. Finally, the sewability of these microwires was qualitatively tested by using a manual sewing machine to pattern microwires on a traditional cotton fabric. Full article