Search Results (165)

The long-term accumulation of phosphogypsum (PG) stacks has caused combined pollution of total phosphorus (TP), fluoride (F⁻), metals and metalloids (MMs), posing a severe threat to regional ecological security. To clarify the migration characteristics of pollutants in PG stacks, water leaching experiments and environmental risk assessment were conducted in 21 typical PG stacks in Southwest China. The spatial differentiation and vertical migration characteristics of pollutants under various coverage measures (high-density polyethylene (HDPE) film covering, soil covering, a composite of film–soil covering, and open-air storage) at different pH conditions were systematically analyzed. Results indicated that under open-air stockpiling conditions, the surface accumulation of TP and F⁻ was the most significant among all covering measures, corresponding to the highest environmental risk. In contrast, the membrane–soil composite covering exhibited the optimal inhibitory effect on the surface diffusion of TP and F⁻, but was less effective for metal and metalloid enrichment. Under acidic conditions (pH < 6), the vertical migration capacity of TP, F⁻, and MMs (Cu, Cd, Cr, Pb, and Zn) increased, leading to enrichment in the deep layers of the stack. With the increase in pH, the calcium-mediated precipitation–adsorption effect created a “geochemical barrier”, facilitating the solid-phase fixation of pollutants. A significant positive correlation among pollutants indicates synergistic release and fixation behaviors. In addition, a pH-controlled P-F-MM source-to-sink conceptual model was established, outlining the dissolution, precipitation, adsorption, fixation and re-enrichment pathway from fresh stock to leachate. This work provides insights for optimizing cover designs and pollution control strategies. Full article

This study investigates the deposition of silicon nitride (SiN) thin films for advanced semiconductor applications, with a specific focus on overcoming thermal challenges in plasma-enhanced atomic layer deposition (PE-ALD) at an elevated temperature of 550 °C. At such high temperatures, a critical obstacle is wafer warpage induced by thermal and mechanical stress, which increases localized thermal contact resistance and degrades film uniformity. To address this, a wafer chucking function was integrated into a monopolar electrostatic chuck (ESC) heater. The ESC secures the wafer to the heater surface, effectively mitigating warpage and ensuring a uniform temperature distribution. Chucking performance was verified by monitoring lift-up motor torque variations and plasma parameters, such as self-bias voltage (Vdc) and peak-to-peak voltage (Vpp), confirming the formation of stable electrostatic coupling. A comparative analysis was conducted between SiN films deposited with and without a chucking voltage of +1000 V. Statistical evaluation across repeated experimental runs (n = 3) confirmed that ESC chucking significantly enhanced spatial uniformity without altering the fundamental PE-ALD growth mechanism. Notably, the application of ESC chucking suppressed the localized temperature drop at the wafer periphery, reducing the in-wafer temperature gradient from 7~8 °C to 2~3 °C. This thermal stability resulted in improved thickness uniformity (variation < 1 Å) and an increase in film density from 2.83 to 2.94 g/cm³. Furthermore, the physical contact between the wafer and the heater effectively eliminated backside deposition to near-zero levels. Pattern evaluation revealed an exceptional step coverage of 99% in high-aspect-ratio (20:1) structures. These results suggest that ESC-assisted PE-ALD provides a robust and reproducible method for high-quality SiN deposition by minimizing thermally induced film variations. Full article

This study presents a modular outdoor vertical farming system integrated into building façades to address urban food security and sustainability challenges in Singapore. The design integrates passive climate control, hydroponics and soil-based irrigation, with active monitoring of the vapor pressure deficit (VPD) and photosynthetically active radiation (PAR). Continuous visual imaging is used to support growth monitoring and predictive harvesting, reducing labor needs. Under experimental conditions, deployment of UCNP-coated light-conversion films improved crop yield by 30% and reduced plant heat stress. Photovoltaic arrays and battery storage enabled energy self-sufficiency and microclimate management in the modular farm. The results demonstrated that building-integrated vertical farms can enhance urban food resilience and resource efficiency, offering a scalable model for sustainable agriculture in land-constrained cities. Full article

To investigate the effect of high-arsenic (As) soil on the absorption of As by highland barley, 135 pairs of soil–crop samples were collected in the main producing areas of highland barley in the middle reaches of the Yarlung Zangbo River. Eight soil variables, including pH, redox potential (Eh), soil organic matter (SOM), total arsenic (T-As), total iron (T-Fe), total manganese (T-Mn), chemically extractable As (KH₂PO₄-As), and bioavailable As determined by diffusive gradients in thin films (DGT-As), were measured, along with As concentrations in barley grains (HB-As). Machine learning approaches were employed to construct predictive models for HB-As accumulation, and feature influence mechanisms were interpreted using SHapley Additive exPlanations (SHAP) and Partial Dependence Plot (PDP) analyses. The results showed that: (1) among models constructed using the full feature set, the random forest (RF) model exhibited the best predictive performance for HB-As, with R² values of 0.756 and 0.651 for the training and testing datasets, respectively; (2) SHAP analysis indicated that DGT-As had the greatest contribution to the model (30.5%), followed by T-As and T-Fe/Mn; and (3) significant interaction effects among soil variables jointly influenced HB-As accumulation. This study provides scientific support for agricultural product safety, soil security, and sustainable land use in plateau agroecosystems. Full article

Monte Carlo simulations of the transport of atoms in gases related to the deposition process and the contamination of amorphous carbon thin films during deposition in magnetron discharges have been performed. These films are of interest in accelerator technology due to their low secondary electron yield when their structures are dominated by sp² carbon. Two codes, which practically share the same algorithm, are introduced: TAGs 1 simulates the transport of sputtered atoms from the target to the substrate, and TAGs 2 simulates the transport of atoms from the plasma towards the target and the substrate. The similar results of TAGs 1 and the well-established SIMTRA for the same input parameters imply the algorithm’s accuracy. The codes were used to model the transport of different atoms (C, H, O, D) in a magnetron Ar discharge. The simulations reveal that the operating pressure should be higher than 1 Pa for a sample-target distance of 90 mm to secure sp² carbon formation. The contamination mechanisms of amorphous carbon coatings were then studied by merging the results obtained with both programs. Preliminary comparisons with experiments suggest that the combined results of TAGs 1 and 2 agree very well with the experiments. Full article

Solar-blind ultraviolet (UV) photodetectors based on wide-bandgap oxide semiconductors are highly desirable for environmental monitoring, flame sensing, and secure optical communication. Among them, Ga₂O₃ has attracted extensive attention due to its ultra-wide bandgap and intrinsic solar-blind response; however, its high dark current, weak built-in electric field, and defect-induced instability remain critical challenges, particularly for amorphous films prepared by scalable sputtering processes. Herein, a self-powered solar-blind UV photodetector based on a NiO/Ga₂O₃ heterojunction is demonstrated, in which the oxygen-vacancy concentration and band structure of sputtered Ga₂O₃ are systematically regulated by tailoring the Ar/O₂ sputtering atmosphere. Combined X-ray photoelectron spectroscopy, UV photoelectron spectroscopy, and optical measurements reveal that the variation in oxygen-vacancy concentration simultaneously modulates the Fermi-level position, band-edge alignment, and built-in potential at the NiO/Ga₂O₃ interface. As a result, the optimized heterojunction device exhibits a low dark current, pronounced rectifying behavior, and efficient carrier separation under zero bias, enabling self-powered operation. The photodetector delivers a responsivity of 47 mA W⁻¹, a detectivity of 7.52 × 10¹¹ Jones, and a high rejection ratio exceeding 10⁴ between 254 and 365 nm. Furthermore, stable and high-contrast UV imaging is successfully demonstrated, highlighting the practical applicability of the device. This work provides an effective methodology for modulating defects and band structure in high-performance solar-blind UV photodetectors based on sputtered wide-bandgap oxide heterojunctions. Full article

This study aimed to evaluate the impact of sterilization of low-adhesive films with ethylene oxide (EO) or accelerated electrons (radiation sterilization) on their performance in the context of their use to protect forensic traces. It was hypothesized that the implementation of the sterilization process made it possible to obtain functional tools for securing traces. The analysis showed that changes in surface density, density, tensile strength, and adhesion strength do not significantly affect the functional performance of the tapes. Additionally, no alterations in chemical resistance were observed following either sterilization method. The results confirm that both sterilization techniques are suitable for obtaining sterile tapes for forensic applications. Full article

This paper presents the design and implementation of an IoT-based automation system for indoor hydroponic plant cultivation using the Nutrient Film Technique. The system employs an ESP32-based controller with multiple sensors and actuators. These enable real-time monitoring and control of pH, TDS, temperature, humidity, light, tank level, and flow conditions. A modular five-layer architecture was developed. It combines the MING stack, which includes MQTT communication, InfluxDB time-series storage, Node-RED flow processing, and Grafana visualization. The system also includes a Flutter-based mobile app for remote access. Key features include temperature-compensated calibration, hysteresis-based control algorithms, dual-mode operation, TLS/ACL security, and automated alarm mechanisms. These features enhance reliability and safety. Experimental results showed stable pH/TDS regulation, dependable actuator and alarm responses, and secure long-term data logging. The proposed open-source and low-cost platform is scalable. It provides a solution for small-scale producers and urban farming, bridging the gap between academic prototypes and production-grade smart agriculture systems. In comparison to related works that mainly focus on monitoring, this study advances the state of the art. It combines continuous time-series logging, secure communication, flow verification, and integrated safety mechanisms to provide a reproducible testbed for future smart agriculture research. Full article

With the widespread diffusion of personal Internet of Things (IoT) devices, Electromagnetic Side-Channel Attacks (EM-SCAs), which exploit electromagnetic emissions to uncover critical data such as cryptographic keys, are becoming extremely common. Existing shielding approaches typically rely on bulky or opaque materials, which limit integration in modern IoT environments; this motivates the need for a transparent, lightweight, and easily integrable solution. Thus, to address this threat, we propose the use of electromagnetic metasurfaces with shielding capabilities, fabricated with an optically transparent conductive film. This film can be easily integrated into glass substrates, offering a novel and discrete shielding solution to traditional methods, which are typically based on opaque dielectric media. The paper presents two proof-of-concept case studies for shielding against EM-SCAs. The first one investigates the design and fabrication of a passive metasurface aimed at shielding emissions from chip processors in IoT devices. The metasurface is conceived to attenuate a specific frequency range, characteristic of the considered IoT processor, with a target attenuation of 30 dB. At the same time, the metasurface ensures that signals from 4G and 5G services are not affected, thus preserving normal wireless communication functioning. Conversely, the second case study introduces an active metasurface for dynamic shielding/transmission behavior, which can be modulated through diodes according to user requirements. This active metasurface is designed to block undesired electromagnetic emissions within the 150–465 MHz frequency range, which is a common band for screen gleaning security threats. The experimental results demonstrate an attenuation of approximately 10 dB across the frequency band when the shielding mode is activated, indicating a substantial reduction in signal transmission. Both the case studies highlight the potential of transparent metasurfaces for secure and dynamic electromagnetic shielding, suggesting their discrete integration in building windows or other environmental structural elements. Full article

Blink monitoring has demonstrated significant application value in fields such as safety assessments, medical monitoring, and intelligent technologies. Traditional eye monitoring methods are limited by restricted adaptability, insufficient comfort, or potential risks. MEMS-based ultrasonic technology, as a non-contact approach, has garnered attention due to its strong environmental adaptability, privacy, and security. However, existing designs require high-sensitivity processing circuits and are incompatible with standard fabrication processes. This work proposes a dual-electrode piezoelectric micro-mechanical ultrasonic transducer (PMUT) design based on aluminum nitride (AlN) piezoelectric thin films, integrated into a glasses device to enable real-time blink activity monitoring. The design successfully identifies blink states through time-of-flight (TOF) pulse-echo technology and dynamic unsupervised learning methods. Fabricated using cost-effective standard multi-user MEMS processes, this device offers distinct merits in terms of wearability comfort, information security, biosafety, and reliability. Full article

Groundwater resources are scarce in the cold and arid regions of north China. Moreover, regional water resource replenishment without external sources remains difficult. This water deficit has become a major factor restricting the sustainable development of regional vegetable production. The effective utilization of rainwater harvesting for irrigated agricultural production is necessary to suppress droughts and floods in farming under the semi-arid climate of this area in order to both guarantee a stable supply of vegetables to the market in south and north China and promote the balanced development of regional agriculture–resource–environment integration. In this study, based on continuous simulation and Python modeling, we simulated and analyzed the water supply and production effects of irrigation with harvests and stored rainwater on tomatoes under different water supply scenarios from 1992 to 2023. We then designed and tested a water-saving and high-yield project for rainwater-irrigated greenhouses in 2024 and 2025 under natural rainfall conditions in northwestern Hebei Province based on the reference irrigation scheme. The water supply satisfaction rate, water demand satisfaction rate, and volume of water inventory of tomato fields under different water supply scenarios increased with the rainwater tank size, and the corresponding drought yield reduction rate of tomato decreased. Under the actual rainfall scenarios in 2024 and 2025, a 480 m² greenhouse with a 14.4 m³ rainwater tank for producing tomatoes irrigated with rainwater drip from the greenhouse film collected 127.7 and 120.5 m³ of rainwater, respectively. The volume of the rainwater tank was exceeded 8.3 and 8.0 times, and up to 93.8% and 95.0% of the irrigated groundwater was replaced; additionally, the average yield of the small-fruited tomato ‘Beisi’ was 50,076.6 kg·hm⁻² and 48,110.2 kg·hm⁻², reaching 96.1% and 92.3% of the expected yield. Conclusion: The irrigation strategy based on the innovative “greenhouse film–rainwater harvesting–groundwater replenishment” model developed in this study has successfully achieved a high substitution rate of groundwater for greenhouse tomato production in the cold and arid regions of north China while ensuring stable yields by mitigating drought and waterlogging risks. This model not only provides a replicable technical framework for sustainable agricultural water resource management in semi-arid areas but also offers critical theoretical and practical support for addressing water scarcity and ensuring food security under global climate change. Full article

It is well known that food waste, especially perishable fruits, is one of the pressing issues worldwide, and as much as 50% of harvested fruits are wasted in developing countries as a result of poor preservation methods. Other traditional options such as plastic films or chemical preservatives are harmful to the environment and to our health. In this work, the limitations are overcome through the fabrication of an innovative camellia saponin/sodium alginate (CS/SA) composite hydrogel film that not only recycles agricultural waste but also improves fruit protection. CS/SA films were prepared by ionic crosslinking with CaCl₂ with different CS content (0–10% w/v, corresponding to 0–3.1 wt% in air-dried films). Detailed SEM, FTIR, XRD and rheological studies indicated that CS addition led to a gradual microstructural densification, stronger intermolecular interactions (involving hydrogen bonding and electrostatic complexation) and superior viscoelasticity, with the best performance at 8% CS (2.5 wt% in dried film). Mechanical tests confirmed that the stable CS/SA film showed higher tensile strength (152 kPa) and compressive strength (353 kPa) than pure SA (10 kPa) with a relatively low Young’s modulus (0.82 MPa) and high elongation at break (116.33%), which could be easily peeled off from fruit surfaces—an essential benefit of this over stiff chitosan/alginate composites. Structure: The composite film exhibited lower porosity (103.2%), reduced moisture content (94.7%), a controlled swelling ratio (800%) and improved barrier property with a water vapor permeability of 1.3 $\times {10}^{-6}$ g·m⁻¹·s⁻¹·kPa⁻¹ and an oxygen permeability of 1.9 × cm³$·\mathsf{\mu }$m·m⁻²·d⁻¹·kPa⁻¹. The 8% CS film showed very strong antioxidant activity (86% DPPH scavenging). Results of application tests on bananas and strawberries indicated that the ripening process was delayed by the CS/SA coatings, the decay rate was decreased from 99.9% (uncoated control) to 55.6% after 9 days, the weight loss was reduced to 29.3%, and the fruit’s firmness and titratable acidity were maintained. This degradable, multifunctional hydrogel film has the potential to be a sustainable measure to simultaneously mitigate food waste, valorize agricultural byproducts, and protect the environment, which could offer substantial benefit for enhancing global food security as well as fruit shelf life. Full article

Leaf photosynthesis plays an important role in maize growth and yield components due to its involvement in dry matter partitioning and organ formation. Nevertheless, how varying planting patterns affect maize leaf photosynthesis, chlorophyll fluorescence and subsequently maize yield remains poorly understood, particularly at various nitrogen rates. A two-season field experiment was performed on rainfed maize in 2021 and 2022 to explore the responses of photosynthetic physiological characteristics, leaf N and chlorophyll contents, chlorophyll fluorescence parameters, grain yield and water productivity to various planting patterns and N rates. The experiment included six planting patterns, i.e., flat planting without mulching (CK), flat planting with straw mulching (SM), ridge mulched with transparent film and furrow without mulching (RP1), flat planting with full transparent film mulching (FM1), ridge mulched with black film and furrow without mulching (RP2), and flat planting with full black film mulching (FM2). Additionally, there were two nitrogen rates, i.e., 0 kg N ha⁻¹ (N0) and 180 kg N ha⁻¹. The results showed that nitrogen application significantly improved leaf physiological characteristics. Under various planting patterns, leaf photosynthetic pigments, leaf area duration, leaf nitrogen content, QYmax and ΦPSII ranked as RP2 > RP1(FM2) > FM1 > SM(CK) in 2021, and RP2(RP1) > FM1(FM2) > SM(CK) in 2022. No significant variations were observed in water productivity (WP) among different film colors, with overall performance of RP2(FM2) > RP1(FM1) > SM > CK. WP significantly improved by 36.14% and 25.15% under N1 compared to N0 in 2021 and 2022, respectively. This pattern paralleled the fluctuation in water consumption intensity. Compared to CK, RP significantly increased leaf nitrogen content (29.3%), total Chl content (16.0%), QYmax (6.39%), ΦPSII (32.01%), and net photosynthesis rate (14.2%), thereby significantly improving grain yield (46.35%) and WP (27.69%), while reducing evapotranspiration (6.84%). Yield performance ranked as RP2 > (RP1 and FM2) > FM1 > SM > CK in 2021 and RP2 > RP1 > (FM1 and FM2) > SM > CK in 2022. Overall, RP2N1 obtained the highest principal component scores in both years, suggesting great potential to improve leaf photosynthetic physiological characteristics, thereby increasing grain production and ensuring food security in rainfed maize cultivation areas. Full article

Against the backdrop of global water scarcity, utilizing sediment-laden river water for agricultural irrigation is a critical strategy for ensuring food security. However, the associated water and nitrogen transport processes are influenced by the coupled effects of multiple factors, and the governing mechanisms are not yet fully understood. To investigate the coupled effects of muddy water sediment concentration (ρ), physical clay content (d_0.01), applied nitrogen concentration (N), and pressure head (H) on infiltration characteristics during film hole irrigation, this study conducted an indoor soil-box experiment using an orthogonal design to analyze soil water and nitrogen transport dynamics. Results indicated that sediment properties were the dominant factors governing infiltration, with their relative influence on cumulative infiltration following the order ρ > d_0.01 > H > N. ρ and d_0.01 strongly inhibited infiltration; for instance, an increase in ρ from 3% to 9% reduced the initial infiltration rate by as much as 49.3%. Conversely, H and N exhibited a slight promoting effect. High muddy water sediment concentration and physical clay content significantly restricted water and nitrogen transport, causing substantial amounts of ammonium nitrogen (NH₄⁺-N) to be retained within the surface soil layer adjacent to the irrigation hole. Paradoxically, the same factors that reduced infiltration (ρ and d_0.01) led to a significant increase in the average change in volumetric water content (Δθ) within the wetted soil volume. Based on these findings, multivariate power function models were developed to predict key parameters. The models demonstrated high predictive accuracy, with coefficients of determination (R²) of 0.9715 for cumulative infiltration, 0.94 for wetting front migration, and 0.9758 for Δθ, and validation errors were within acceptable limits. In conclusion, the film hole irrigation process is predominantly governed by physical clogging from sediment particles, a mechanism that decisively controls the spatial distribution of water and nitrogen. Furthermore, the slight enhancement of infiltration by nitrogen fertilizer suggests a potential physicochemical mechanism, possibly involving ion-induced flocculation of clay particles. The models developed in this study provide a quantitative basis for precision fertigation management in China’s Yellow River irrigation district and other regions with similar conditions. Full article

This study investigates a metal-contact etching process that differs from conventional device contact etching by focusing on the film-stack configuration and the associated super-contact etching characteristics. Because metal-contact etching is closely linked to both physical profiles and electrical performance, evaluating a single parameter provides limited insight; thus, the physical profile characteristics of metal-contact etching and 3D-integrated super-contacts were comprehensively examined. In the first-step etch, the target depth in the wafer left region was approximately 2365 Å, and the bottom surface exhibited a desirable rounded profile. Following the removal of liner TEOS and nitride, the stopping margin was evaluated under three conditions: (1) metal-contact etching with a ~22 s target reduction, (2) a CMOS image-sensor baseline incorporating an interlayer-dielectric-reduction scheme, and (3) a high-selectivity condition achieved by increasing the C₅F₈/O₂ ratio with a reduced etch target. Under all three conditions, the bit-line contact (BLC) nitride experienced punch-through. To address this limitation, a three-step etch sequence was implemented, in which the first two steps achieved the required etch depth and the final step utilized a high-selectivity over-etch to secure a sufficient stopping margin. This approach demonstrated robust process windows, favorable CD control, and reliable nitride stopping performance, thereby establishing a practical methodology for stable super-contact etching in advanced 3D-integrated logic applications. Full article