Search Results (30,290)

Synergistic diagenetic evolution of sandstones and shales significantly impacts the quality of associated tight oil and shale oil reservoirs. Using integrated petrographic (thin sections, fluorescence thin sections, scanning electron microscopy with energy dispersive spectroscopy), mineralogical (X-ray diffraction), geochemical (stable carbon–oxygen isotopes, electron microprobe), organic petrologic, and petrophysical analyses, combined with basin burial and thermal history reconstruction, this study investigates the mechanisms and processes of synergistic diagenesis in the tight sandstone-shale assemblages of the 7th and 8th Members of the Yanchang Formation (Middle-Late Triassic) in the western Zhidan area, Ordos Basin, China. Controlled by basin evolution, the interbedded sandstones and shales, under shared burial-thermal conditions, exhibit strong synergy in four coupled processes: compaction, clay mineral evolution, shale fluid expulsion coupled with sandstone carbonate cementation, and shale hydrocarbon expulsion coupled with sandstone secondary porosity generation. This “fluid supply-response modification” relationship strongly influences diagenetic pathways and reservoir space evolution in sandstones, leading to variable reservoir quality among different sandstone-shale assemblages. Thicker-bedded sandstones interbedded with thinner-bedded shales represent potential targets for high-quality tight sandstone reservoirs. These findings provide a possible theoretical and methodological basis for identifying high-quality tight sandstone reservoirs in lacustrine-deltaic sandstone-shale assemblages. Full article

The concentration of heavy metals in the environment has been steadily increasing, raising concerns about their adverse effects on ecosystems and human health. Fine-grained particulate matter is of particular concern due to its enhanced mobility, bioavailability, and potential for inhalation exposure. Facilities involved in the mechanical processing of electronic waste (e-waste) represent a significant potential source of metal-containing fine particles. In this study, crushed e-waste components containing precious metals were separated into particle-size fractions ranging from 3.0 to 0.15 mm using a vibratory sieving system. The elemental composition of the individual fractions was determined by energy-dispersive X-ray fluorescence spectrometry (ED-XRF), while the spatial distribution of selected metals in fine fractions was further investigated using scanning electron microscopy combined with energy-dispersive X-ray spectroscopy (SEM–EDS). The results demonstrate that e-waste contains a wide range of heavy non-ferrous metals whose distribution is strongly dependent on particle size. A pronounced enrichment of metals was observed in the finest fractions, particularly below 0.25 mm. Compared to the coarse fraction (>3 mm), the zinc concentration increased by approximately one order of magnitude, while chromium, nickel, and cadmium exhibited increases of up to approximately 20-fold. Lead showed particularly high enrichment, reaching approximately 2 wt.% in the finest fraction (<0.15 mm), corresponding to nearly fiftyfold enrichment relative to the coarse fraction. Tin concentrations also increased markedly, in some cases by up to two orders of magnitude. Trace amounts of arsenic and selenium were detected in the finest fractions, whereas mercury was not detected. The combined ED-XRF and SEM–EDS results confirm that fine-grained e-waste fractions are the dominant carriers of hazardous metals and respirable particles generated during mechanical processing. These findings highlight the dual character of fine fractions as both a critical environmental and occupational risk and a potentially valuable secondary resource. The study emphasizes the importance of controlled handling, effective dust management, and targeted processing strategies to minimize human exposure while enabling efficient recovery of valuable metals from e-waste. Full article

Morphological characteristics of pollen grains, including shape, size, pore number, and exine thickness, vary significantly among species and enable the reliable use of palynological data in taxonomic studies. In this context, the present study investigates the pollen morphology of seven Betulaceae taxa (Alnus glutinosa, Betula pendula, Carpinus betulus, Carpinus orientalis, Corylus avellana, Corylus colurna, and Ostrya carpinifolia). Detailed morphometric measurements were carried out using Light Microscopy (LM), and high-resolution images were obtained using Scanning Electron Microscopy (SEM). For each taxon, thirty measurements were taken for the main pollen characters, including polar axis length (P), equatorial diameter (E), pore length (plg), pore width (plt), and exine thickness (Ex). Interspecific differences were evaluated using one-way ANOVA, Tukey’s HSD test, and Principal Component Analysis (PCA), and a diagnostic pollen identification key was developed for the investigated species. The results demonstrate statistically significant interspecific variation in pollen size, pore characteristics, and exine thickness. In the PCA ordination, the first principal component (PC1) was mainly associated with pollen size (P and E), clearly separating Carpinus betulus from the remaining taxa. The second principal component (PC2) was primarily related to pore length (plg) and contributed to the separation of Alnus glutinosa from the other small-pollen species. These results show that quantitative pollen morphological characters provide reliable criteria for distinguishing closely related Betulaceae taxa. Full article

This study evaluated the potential protective effect of a synthesized self-antibacterial nano-hydroxyapatite (nano-HA) toothpaste against erosive changes in the enamel surface induced by a cola-based soft drink, based on a qualitative scanning electron microscopy (SEM) study, in comparison with conventional fluoride toothpaste. Thirty extracted human premolars were sectioned to obtain enamel specimens and randomly assigned into a control group and experimental groups in which fluoride or synthesized nano-HA toothpaste was applied either before or after cola exposure (n = 5 per group). Enamel surface morphology was qualitatively assessed using SEM, and surface roughness (Ra) was estimated using a semi-quantitative approach based on SEM image analysis using ImageJ software. Antibacterial activity was evaluated using the agar diffusion method to explore the potential additional benefits of the synthesized self-antibacterial nano-HA formulation. SEM observations showed that, after cola exposure, specimens treated with nano-HA exhibited less surface erosion than fluoride-treated groups. Post-treatment with nano-HA results in a denser and more uniform surface layer with fewer structural defects. Similarly, enamel treated with nano-HA after cola exposure showed a statistically significant reduction in surface roughness compared with the fluoride group (p < 0.05). These findings suggest that nano-HA provides greater protective effects against acid-induced enamel surface erosion. Furthermore, nano-HA indicated potential antibacterial activity against S. aureus and E. coli. Overall, nano-HA toothpaste provided enhanced protection against acid-induced enamel erosion with additional antibacterial effects. Full article

To promote the high-value utilization of fly ash (FA) and address the prolonged setting time and limited strength associated with conventional single-alkali activation, this study proposes a synergistic dual-alkali activation strategy using Ca(OH)₂ and Na₂SiO₃ in combination with microwave-assisted curing for low-calcium fly ash. Samples containing varying amounts of Ca(OH)₂ were systematically characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), compressive strength testing, and pore structure analysis. The results show that Ca(OH)₂ facilitates the formation of calcium aluminosilicate hydrate (C-A-S-H) gel, while Na₂SiO₃ sustains the alkaline environment and enhances the dissolution of SiO₂ and Al₂O₃ from FA. The dual-alkali synergistic system, when coupled with microwave treatment, markedly refines the pore structure, increases the degree of polymerization, and improves compressive strength from 0.5 MPa to 1.7 MPa with increasing Ca(OH)₂ content. In addition, the prepared fly ash-based geopolymer (FABG) demonstrates pronounced pH-buffering capacity in acidic environments and exhibits antibacterial activity, primarily attributable to its sustained release of alkalinity. This work highlights that integrating dual-alkali activation with microwave curing can simultaneously enhance microstructural development, chemical stability, and functional performance in low-calcium FA systems, thereby offering a viable route for the development of sustainable and multifunctional green building materials derived from industrial solid waste. Full article

Aluminum alloy composites are widely used in various high-end fields due to their ability to give full play to the advantages of each layer. However, the traditional three-layer aluminum alloy composite sheet cannot meet the current demand. In this study, composite rolling technology is adopted to combine three different alloys (4045, 3003, and 6061) for fabricating a 2.0 mm thick four-layer aluminum alloy composite sheet (4045/3003/6061/3003). The microstructure and properties of the composite sheet were analyzed by simulating the vacuum brazing process (595 °C/10 min) and artificial aging treatment (175 °C for 12 h), combined with characterization techniques including scanning electron microscopy (SEM), electron backscatter diffraction (EBSD) and transmission electron microscopy (TEM). The results show that the four-layer composite sheet exhibits lower Si diffusion after brazing, where the intermediate 3003 aluminum alloy layers effectively prevent the combination of magnesium (Mg) and the 4045 alloy. Compared with the brazed three-layer composite sheet the ultimate tensile strength and yield strength of the four-layer composite sheet after aging are increased by 139.7% and 326.6%, respectively, indicating significant improvement in its mechanical properties. This study provides a reference for the production of four-layer aluminum alloy composite sheet and contributes to the development of rail transit. Full article

Background and Objectives: Diagnostics for hematologic diseases rely on integrated assessment of clinical manifestation, morphology, flow cytometry, and molecular testing. Current classification systems, including the WHO HAEM5 and the International Consensus Classification, highlight the central role of genomics in defining disease entities and risk. Simultaneously, laboratories face growing case complexity and staffing challenges. Automation, collaborative robots (cobots), digital morphology platforms, and artificial intelligence (AI) have begun to address these issues. Here we examine the application of these technologies in hematopathology and molecular diagnostics and consider their translational potential to improve diagnostic accuracy and, ultimately, patient care. Methods: A review of peer-reviewed literature and technical reports published through December 2025 was performed, focusing on digital morphology platforms, AI for peripheral blood and marrow interpretation, AI-enabled flow cytometry, automated and robotic deployments in clinical laboratories, and machine learning applications in molecular hematopathology. Results: Digital morphology analyzers show strong concordance with manual microscopy and now serve as efficient platforms for AI-assisted differentials, cell classification, and fibrosis quantification. Deep learning applied to multiparameter flow cytometry achieves performance comparable to expert review in distinguishing mature B-cell neoplasms and acute leukemias. Automated solutions, cobot systems and robotic-arm-based slide-scanning clusters have demonstrated substantial gains in throughput and pre-analytic consistency. AI models in molecular hematopathology increasingly assist with variant interpretation, genetic risk stratification, and linking morphologic and genomic findings. Conclusions: AI is beginning to change how hematopathology and molecular diagnostics are practiced. Successful translation will depend on disease-specific validation, the development of multi-modal models aligned with ICC and WHO frameworks, and laboratory governance that maintains expert oversight. Full article

The modification of road bitumen using micro-sized carbonaceous materials offers a promising route to enhance pavement performance; however, the influence of microdispersed coke derived from coal and petroleum sources has not been sufficiently clarified. In this study, coal and petroleum coke from Pavlodar Petrochemical Plant LLC (Pavlodar, Kazakhstan) were mechanochemically activated and used as the modifiers for BND 100/130 bitumen, produced by Asphaltbeton 1 LLC (Almaty, Kazakhstan). X-ray diffraction and scanning electron microscopy were used to determine the structure and morphology of the resulting coke powders. Standard tests and the Superpave Multiple Stress Creep and Recovery (MSCR) methodology were used to determine the physico-mechanical and rheological properties of the modified binders. Microdispersed granular coke powders produced after mechanochemical activation had a minimum average particle diameter of 8.28 µm (petroleum coke) and 16.64 µm (coal coke), and were mainly an amorphous carbon phase with traces of graphite. Addition of 1 wt.% microdispersed coke resulted in better performance of binder and an enhancement in grades of BND 100/130 to BND 70/100, in line with ST RK 1373-2013. MSCR testing showed that Jnr_3.2 is between 2.0–3.0 kPa⁻¹, which is in the S category of AASHTO M 332-20. This study showed how micro-sized coal and petroleum coke can be effectively used as a high-carbon modifier in bitumen, which reflects the possibility of their practical use in asphalt pavements that are subjected to normal traffic conditions. Full article

Streptococcus sanguinis (S. sanguinis) is an oral commensal and early colonizer of the tooth surface that contributes to dental biofilm homeostasis. Zinc oxide nanoparticles (ZnO NPs) are often incorporated into dental restorative materials to enhance mechanical performance and confer antibacterial properties; however, their effects on S. sanguinis have not been thoroughly studied. Here, we investigated the antimicrobial and antibiofilm efficacy of ZnO NPs against this bacterial species. ZnO NPs exhibited a minimal inhibitory concentration (MIC) of 100 µg/mL and caused rapid, dose-dependent suppression of intracellular ATP levels and overall metabolic activity within 2–4 h of exposure. ZnO NPs induced reactive oxygen species (ROS) production in a dose-dependent manner. The free radical scavenger α-tocopherol partly prevented the antibacterial effect of ZnO NPs, suggesting that lipid peroxidation contributes to ZnO NP-mediated toxicity, although it is not the sole mechanism involved. Short-term exposure (2 h) to ZnO NPs did not significantly affect membrane integrity or cellular morphology, whereas prolonged treatment (24 h) resulted in pronounced membrane permeabilization, membrane hyperpolarization, and cellular swelling. Computational morphometric analyses of high-resolution scanning electron microscopy (HR-SEM) images of planktonic growing bacteria after a 24 h treatment confirmed a significant, dose-dependent increase in cell surface area and surface roughness. Importantly, ZnO NPs also reduced the metabolic activity and compromised the structural integrity of mature, preformed biofilms. Collectively, these findings demonstrate that ZnO NPs exert antimicrobial and antibiofilm effects against S. sanguinis through early metabolic inhibition associated with oxidative stress followed by progressive membrane dysfunction. Full article

Effluents from industries, manufacturing companies, textile looms, and floodwater contaminate the surface water reservoirs. This endangers the quality of water for use by humans. Wastewater remediation is one of the ways to recycle the dirty water and make it suitable for use. Photocatalysis is the most common method for wastewater remediation, especially using Titanium dioxide (TiO₂) nanoparticles. However, chemical synthesis and direct addition of nanoparticles may cause toxicity to the flora and fauna present in the water body. To address this limitation, we have green-synthesized TiO₂ nanoparticles using a horticulture waste, Calendula officinalis dried flower extract and entrapped them in a natural polymer, chitosan (CTS-TiO₂-CO nanocomposite). The polymer entrapment ensures biocompatibility as well as reduced aggregation of nanoparticles. The synthesized CTS-TiO₂-CO nanocomposite was characterized using UV-visible spectrophotometry, dynamic light scattering, zeta potential, Fourier Transformed Infrared Spectroscopy (FTIR), X-ray diffractometry (XRD), scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDAX) analysis. The absorption peak was found at 302 nm, and the hydrodynamic diameter at 490 nm. SEM images show flower-like morphology with 326 nm average particle diameter. The non-toxic dose of the nanoparticles was estimated by MTT assay and zebrafish embryo developmental studies. More than 82% fibroblast cells were viable after treatment with 100 μg/mL of CTS-TiO₂-CO nanocomposite. 85% embryos hatched after treatment with 50 μg/mL of CTS-TiO₂-CO nanocomposite. Further, the textile dye remediation assessment was done using the dye crystal violet, exhibiting 69.19% dye degradation after 4 h of sunlight exposure. Altogether, the results demonstrate that the CTS-TiO₂-CO nanocomposite was effective in the remediation of crystal violet without causing any toxicity up to a dose of 100 μg/mL. Full article

Neutrophil extracellular traps (NETs) critically influence thrombosis by promoting platelet aggregation, fibrin formation, and thrombus stabilisation. However, primary human neutrophils present experimental limitations, including short lifespan ex vivo and ethical concerns. In this article, we discuss the available data on PLB-985 cells, a neutrophil-like model with potential to replace human neutrophils in research. Additionally, we present novel structural comparisons showing that both PLB-985- and human neutrophil-derived NETs significantly increased fibrin fibre thickness compared to thrombin-only controls, with similar fibre morphology across conditions. Notably, we also see spherical particles resembling microvesicles within PLB-985-derived NETs, suggesting potential additional procoagulant effects via microvesicle-associated tissue factor level in these cells. New and existing data presented in this article suggest that differentiated PLB-985 cells are able to effectively replicate key structural and functional aspects of human neutrophil NETs. These observations support the use of PLB-985 cells as an ethical, reproducible, and practical alternative for in vitro studies of NETs. Further characterisation is required to determine differences between human neutrophils and neutrophil-like models in macrovesicle formation and implication in NET-related thrombosis research. Full article

Background: The root of Schisandra propinqua (Wall.) Baill. var. sinensis Oliv is a traditional ethnomedicine in China; it was widely used to treat abscesses, sores, carbuncles, rheumatism, and so on. The purpose of this study was to elucidate the bacteriostatic mechanism of the ethyl acetate extract from the root of Schisandra propinqua (Wall.) Baill. var. Sinensis Oliv (Xiao Xue Teng) against Staphylococcus aureus ATCC 25923 (S. aureus ATCC 25923). Methods: Bioactive bacteriostatic constituents in Xiao Xue Teng were identified through Hybrid Quadrupole-TOF LC/MS/MS. The minimum inhibitory concentration (MIC) of Xiao Xue Teng against S. aureus ATCC 25923 was determined using the microbroth dilution method. A time–kill curve analysis was used to evaluate the bacteriostatic effects. SDS-PAGE coupled with nano-liquid NanoLC-ESI-MS/MS, real-time PCR, and scanning electron microscopy (SEM) was used to study the bacteriostatic mechanism of Xiao Xue Teng against S. aureus ATCC 25923. Results: The MIC of Xiao Xue Teng against S. aureus ATCC 25923 was determined to be 15.625 µg/mL. The translation initiation factor (IF-2) and elongation factor (EF-Tu) were significantly decreased in S. aureus ATCC 25923 after treatment with Xiao Xue Teng, while the proteins SodA and AhpC were obviously increased. The intracellular levels of total reactive oxygen species (ROS) and hydrogen peroxide (H₂O₂) were significantly increased (p < 0.01) after the treatment with Xiao Xue Teng. Concurrently, the activities of SOD, CAT and GSH-Px were significantly increased (p < 0.01). Moreover, cellular swelling and shrinkage were observed using SEM. Conclusions: The bacteriostatic mechanism of Xiao Xue Teng against S. aureus ATCC 25923 was related to eliciting oxidative stress, inhibiting protein synthesis and enhancing cytoplasmic membrane permeability. Full article

The chemical and mineral composition, physical and mechanical properties, and pozzolanic activity of ancient bricks from Hubei Province, China were investigated in this study. X-ray diffraction (XRD), thermogravimetric analysis (TG-DSC), X-ray fluorescence analysis (XRF) and scanning electron microscopy–energy dispersive spectroscopy (SEM-EDS) were adopted to characterize the chemical composition, crystalline minerals and microstructure of the ancient bricks. The results show that quartz is the dominant component in most ancient bricks, with a content exceeding 70% in samples BB-2, BB-5, BB-6 and BB-7. Some bricks contain minor non-clay minerals such as calcite, dolomite and albite. On some points in the SEM image, substances such as gypsum, calcite, and quartz can be clearly seen. The calcining temperature of the ancient bricks from Yupan Village, Xiantao City (sample BB-1), does not exceed 600 °C, while that of other samples ranges from 800 to 1100 °C. The compressive strength of most ancient bricks is around 10 MPa, with the highest value of 14.3 MPa (BB-6) and the lowest of 1.2 MPa (BB-3). The apparent density of all samples is approximately 2.2 g/cm³, and the water absorption rate ranges from 6.5% to 23.1%. The pozzolanic activity index of some samples reaches 76% at 28 days, with the 150-year-old sample BB-7 showing the best activity. This study provides a reliable experimental basis for analyzing the weathering resistance and deterioration mechanism of ancient bricks in Hubei Province, offers technical support for the restoration of local ancient buildings, and lays a foundation for the development of antique-style brick craftsmanship. Full article

This study compared three internal surface treatments of zirconia copings—silane alone (control), airborne-particle abrasion followed by silane, and high-temperature hydrofluoric acid etching followed by silane—regarding initial pull-out retention strength, retention after thermocycling, failure mode assessed by scanning electron microscopy (SEM), and surface wettability. Sixty-three monolithic zirconia copings were allocated to three groups (n = 21) according to surface treatment and cemented to titanium bases with a self-adhesive resin cement. Initial pull-out tests were performed. A subset (n = 10 per group) underwent thermocycling followed by repeat testing. Failure modes were analysed by SEM, and wettability was measured using the sessile drop method. Surface roughness and crystalline phase were additionally characterized by white-light interferometry and X-ray diffraction (XRD), respectively. High-temperature acid etching produced significantly higher initial pull-out forces than airborne-particle abrasion and silane alone, with mean values 125% higher than control and 42.6% higher than airborne-particle abrasion. After thermocycling, acid-etched specimens maintained the highest retention, whereas airborne-particle abrasion showed critical loss. SEM revealed predominantly cement remnants on zirconia in the acid-etched group, indicating a stronger zirconia–cement interface. Acid etching also yielded significantly lower contact angles, reflecting improved wettability. High-temperature hydrofluoric acid etching followed by silanization provided superior and more stable retention, more favourable failure modes, and improved wettability. Full article

The urgent need to mitigate carbon dioxide (CO₂) emissions from fossil-fuel-based electricity generation has driven research into advanced materials for post-combustion carbon capture. This paper presents a modified solvothermal technique to synthesize zinc (Zn) and magnesium (Mg) based MOF-74 suitable for CO₂ capture from coal-fired power plants. The materials were synthesized through a solvothermal method using N,N-dimethylformamide (DMF) as the primary solvent, and subsequently characterized using Brunauer–Emmett–Teller (BET) surface area analysis, Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDX), and thermogravimetric analysis (TGA). Both MOFs contained oxygen-containing functional groups and were thermally stable up to 430 °C and 600 °C respectively, making them ideal for carbon capture. The low-pressure N₂-BET surface areas were 55 m²/g and 24.73 m²/g. In conclusion, the Zn material had a mesoporous structure, making it more favorable for carbon capture. It was found that prolonged synthesis time weakened the MOF structure. Future work should experimentally evaluate CO₂ capture from coal-derived flue gas using Zn/Mg-MOF-74 materials, investigating adsorption behavior and kinetics through isotherm and kinetic models, while also assessing the effect of varying Zn: Mg ratios under optimized synthesis conditions. Full article