Search Results (1,115)

Conventional separation methods often prove ineffective for complex, refractory high-phosphorus iron ores. Recent advances propose a coal-based direct reduction dephosphorization-magnetic separation process, achieving significant dephosphorization efficiency. This review systematically analyzes phosphorus occurrence states in high-phosphorus oolitic iron ores across global deposits, particularly within iron minerals. We categorize contemporary research and elucidate dephosphorization mechanisms during coal-based direct reduction. Key factors influencing iron mineral phase transformation, iron enrichment, and phosphorus removal are comprehensively evaluated. Phosphorus primarily exists as apatite and collophane gangue m horization agents function by: (1) inhibiting phosphorus-bearing mineral reactions or binding phosphorus into soluble salts to prevent incorporation into metallic iron; (2) enhancing iron oxide reduction and coal gasification; (3) disrupting oolitic structures, promoting metallic iron particle growth, and improving the intergrowth relationship between metallic iron and gangue. Iron mineral phase transformations follow the sequence: Fe₂O₃ → Fe₃O₄ → FeO (FeAl₂O₄, Fe₂SiO₄) → Fe. Critical parameters for effective dephosphorization under non-reductive phosphorus conditions include reduction temperature, duration, reductant/dephosphorization agent types/dosages. Future research should focus on: (1) investigating phosphorus forms in iron minerals for targeted ore utilization; (2) reducing dephosphorization agent consumption and developing sustainable alternatives; (3) refining models for metallic iron growth and improving energy efficiency; (4) optimizing reduction atmosphere control; (5) implementing low-carbon emission strategies. Full article

Methane pyrolysis produces hydrogen (H₂) with solid carbon black as a co-product, eliminating direct CO₂ emissions and enabling a low-carbon supply when combined with renewable or low-carbon heat sources. In this study, we propose a hybrid geothermal pyrolysis configuration in which an enhanced geothermal system (EGS) provides base-load preheating and isothermal holding, while either electrical or solar–thermal input supplies the final temperature rise to the catalytic set-point. The work addresses four main objectives: (i) integrating field-scale geothermal operating envelopes to define heat-integration targets and duty splits; (ii) assessing scalability through high-pressure reactor design, thermal management, and carbon separation strategies that preserve co-product value; (iii) developing a techno-economic analysis (TEA) framework that lists CAPEX and OPEX, incorporates carbon pricing and credits, and evaluates dual-product economics for hydrogen and carbon black; and (iv) reorganizing state-of-the-art advances chronologically, linking molten media demonstrations, catalyst development, and integration studies. The process synthesis shows that allocating geothermal heat to the largest heat-capacity streams (feed, recycle, and melt/salt hold) reduces electric top-up demand and stabilizes reactor operation, thereby mitigating coking, sintering, and broad particle size distributions. High-pressure operation improves the hydrogen yield and equipment compactness, but it also requires corrosion-resistant materials and careful thermal-stress management. The TEA indicates that the levelized cost of hydrogen is primarily influenced by two factors: (a) electric duty and the carbon intensity of power, and (b) the achievable price and specifications of the carbon co-product. Secondary drivers include the methane price, geothermal capacity factor, and overall conversion and selectivity. Overall, geothermal-assisted methane pyrolysis emerges as a practical pathway to turquoise hydrogen, if the carbon quality is maintained and heat integration is optimized. The study offers design principles and reporting guidelines intended to accelerate pilot-scale deployment. Full article

Acetolactate synthase (ALS) is an important enzyme in plant branched-chain amino acid biosynthesis and the target of several major herbicide classes. Despite its agronomic importance, the role of ALS genes in stress adaptation in the invasive weed Amaranthus palmeri remains unstudied. In this study, four ApALS genes with high motif conservation were identified and analyzed in A. palmeri. Phylogenetic analysis classified ApALS and other plant ALS proteins into two distinct clades, and the ApALS proteins were predicted to localize to the chloroplast. Gene expression analysis demonstrated that ApALS genes are responsive to multiple stresses, including salt, heat, osmotic stress, glufosinate ammonium, and the ALS-inhibiting herbicide imazethapyr, suggesting roles in both early and late stress responses. Herbicide response analysis using an Arabidopsis thaliana ALS mutant (AT3G48560) revealed enhanced imazethapyr resistance, associated with higher chlorophyll retention. Furthermore, high sequence homology between AT3G48560 and ApALS1 suggests a conserved role in protecting photosynthetic function during herbicide stress. This study provides the first comprehensive analysis of the ALS gene family in A. palmeri and offers important insights into its contribution to stress resilience. These findings establish a vital foundation for developing novel strategies to control this pervasive agricultural weed and present potential genetic targets for engineering herbicide tolerance in crops. Full article

Light quality is a recognized driver of plant growth and secondary metabolism in Coleus blumei, a valuable source of rosmarinic acid (RA) and quercetin (QU), whereas its combination with salinity stress represents a potential strategy that still requires further investigation. We evaluated four LED spectra, red–blue (RB) (6:1, control), blue (B), red (R), and RB + Far-Red, under both control (0 mM NaCl) and moderate salt stress (120 mM NaCl), measuring biomass (dry weight) and RA/QU in leaves and roots after three (T1) and five weeks (T2). Blue light produced the greatest root biomass, while the leaf dry weight under B did not differ significantly from RB or RBfr. RA peaked at T2 under B in leaves and under R in roots; QU was maximal under B in leaves and under RB in roots. Extending exposure from T1 to T2 markedly increased both metabolites’ yield. Salinity had little effect on biomass, increased the total QU yield, and did not enhance the total RA yield. These results indicate that targeted LED regimes and longer exposure can raise the yields of bioactive compounds, and that combining specific spectra with moderate salinity is an effective strategy for selectively increasing quercetin accumulation in indoor-grown C. blumei. Full article

Concentrated Solar Power (CSP) technology is advancing toward higher operating temperatures and lower costs: current systems operate at 565 °C, while next-generation systems are targeted to reach 800 °C to overcome efficiency limitations. In this context, low-cost, adaptable molten chloride salts have emerged as ideal heat transfer and thermal energy storage media. Metallic materials are susceptible to performance degradation under such conditions, which not only shortens equipment service life but also entails potential safety hazards. Thus, the development of alloy protection technologies resistant to molten salt corrosion has become an urgent priority for the deployment of next-generation CSP plants. Research has indicated that high-aluminum stainless steel is a promising candidate due to its unique advantages: it can form a stable Al₂O₃ protective film in oxygen-containing anionic environments, effectively inhibiting the dissolution of Cr, Fe, and other elements, and preventing the penetration of corrosive species. Additionally, the incorporation of magnesium-based corrosion inhibitors into MgCl₂-NaCl-KCl ternary molten salt systems has been proven to be an economically viable and efficient corrosion mitigation strategy. This study focused on high-aluminum 310S heat-resistant steel, with its performance validated through targeted experiments: samples subjected to pre-oxidation at 800 °C for 2 h were immersed in a specific ternary molten salt mixture (20.4 wt.% KCl, 55.1 wt.% MgCl₂, 24.5 wt.% NaCl) containing magnesium corrosion inhibitors, followed by a 600 h static corrosion test at 800 °C. The results revealed that the addition of magnesium significantly enhanced the corrosion resistance of high-aluminum 310S. These findings demonstrate that this material holds application potential in the storage tank and pipeline systems of next-generation CSP plants. Full article

Seawater reverse osmosis (SWRO) desalination generates a concentrated brine byproduct rich in dissolved salts and minerals. This study presents an extensive economic and technical analysis of recovering all major ions from SWRO brine, which includes Na, Cl, Mg, Ca, SO₄, K, Br, B, Li, Rb, and Sr in comparison to conventional mining and chemical production of these commodities. Data from recent literature and case studies are compiled to quantify the composition of a typical SWRO brine and the potential yield of valuable products. A life-cycle cost framework is applied, incorporating capital expenditure (CAPEX), operational expenditure (OPEX), and total water cost (TWC) impacts. A representative simulation for a large 100,000 m³/day SWRO plant shows that integrated “brine mining” systems could recover on the order of 3.8 million tons of salts per year. At optimistic recovery efficiencies, the gross annual revenue from products (NaCl, Mg(OH)₂/MgO, CaCO₃, KCl, Br₂, Li₂CO₃, etc.) can reach a few hundred million USD. This revenue is comparable to or exceeds the added costs of recovery processes under favorable conditions, potentially offsetting desalination costs by USD 0.5/m³ or more. We compare these projections with the economics of obtaining the same materials through conventional mining and chemical processes worldwide. Major findings indicate that recovery of abundant low-value salts (especially NaCl) can supply bulk revenue to cover processing costs, while extraction of scarce high-value elements (Li, Rb, Sr, etc.) can provide significant additional profit if efficient separation is achieved. The energy requirements and unit costs for brine recovery are analyzed against those of terrestrial or conventional mining; in many cases, brine-derived production is competitive due to avoided raw material extraction and potential use of waste or renewable energy. CAPEX for adding mineral recovery to a desalination plant is significant but can be justified by revenue and by strategic benefits such as reduced brine disposal. Our analysis, drawing on global data and case studies (e.g., projects in Europe and the Middle East), suggests that metals and salts recovery from SWRO brine is technically feasible and, at sufficient scale, economically viable in many regions. We provide detailed comparisons of cost, yield, and market value for each target element, along with empirical models and formulas for profitability. The results offer a roadmap for integrating brine mining into desalination operations and highlight key factors such as commodity prices, scale economies, energy integration, and policy incentives that influence the competitiveness of brine recovery against traditional mining. Full article

Understanding heavy metal behavior in arid saline soils is critical for phytoremediation in degraded lands. This study investigated metal distribution and plant enrichment in the Tarim Basin using 323 soil and 55 plant samples (Populus euphratica, Tamarix ramosissima, cotton, jujube). Analyses included redundancy analysis (RDA) and bioconcentration factor (BCF) assessments. Key findings reveal that elevated salinity (total salts, TS > 200 g/kg) and alkalinity (pH > 8.5) immobilized As, Cd, Cu, and Zn. Precipitation and competitive leaching reduced metal mobility by 42–68%. Plant enrichment strategies diverged significantly: P. euphratica hyperaccumulated Cd (BCF = 1.59) and Zn (BCF = 2.41), while T. ramosissima accumulated As and Pb (BCF > 0.05). Conversely, cotton posed Hg transfer risks (BCF = 2.15), and jujube approached Cd safety thresholds in phosphorus-rich soils. RDA indicated that pH and total salinity (TS) jointly suppressed metal bioavailability, explaining 57.6% of variance. Total phosphorus (TP) and soil organic carbon (SOC) enhanced metal availability (36.8% variance), with notable TP-Cd synergy (Pearson’s r = 0.42). We propose a dual-threshold management framework: (1) leveraging salinity–alkalinity suppression (TS > 200 g/kg + pH > 8.5) for natural immobilization; and (2) implementing TP control (TP > 0.8 g/kg) to mitigate crop Cd risks. P. euphratica demonstrates targeted phytoremediation potential for degraded saline agricultural systems. This framework guides practical management by spatially delineating zones for natural immobilization versus targeted remediation (e.g., P. euphratica planting in Cd/Zn hotspots) and implementing phosphorus control in high-risk croplands. Full article

Background/Objectives: Monitoring of 24 h urine analysis is currently used to assess diet-related stone risk factors due in most cases to low hydration and high osmole intake accounting for urine supersaturation. The aim of our study is to test whether urine conductivity could be a relevant surrogate marker of urine osmolality and a useful tool for monitoring salt and protein diets in primary care centers. Methods: 113 patients with kidney stone history referred for a routine evaluation of fasting and 24 h urine samples were included. Biochemical analysis of urine was performed, including measured osmolality (mUosm) and conductivity. Results: Among our population, 45% of patients have a low diuresis (high-risk group of stone recurrence) below the target of 2 L/day, with lower daily mUOsm and conductivity outflow compared to the low-risk patient group > 2 L/day (718 versus 852 mosm/Day, p < 0.0001, and 13,730 versus 17,890 mS/cm/day, p < 0.0001, respectively). Conversely to urine sodium and urea concentration, daily sodium and protein intake estimated by natriuresis and urea excretion are significantly lower in the high-risk group (p = 0.01 and <0.0001, respectively). In 24 h urine samples, osmolality and conductivity were strongly associated with diuresis. Moreover, a strong association between urinary osmolality and urine conductivity enables an estimated osmolality (eUosm) according to the following equation: eUosm = −41.656 + 0.057 × conductivity (r² = 0.93; p < 0.001) with a 95% limit of agreement (LoA) ranging from −7.2% to +7.3%. An eUosm threshold value < 900 mOsm/day is independently associated with sodium and protein intake targets (odd ratio: 19.2 and 6.4-fold, respectively, p < 0.0001 and 0.01). Conclusions: 24 h urine measured conductivity appears to be a reliable, easy-to-use tool for the screening and monitoring of diet-related stone patients in primary care centers. Full article

Background: The TGACG-BINDING FACTORS (TGA) gene family, a key subgroup of bZIP transcription factors, mediates plant stress responses and developmental processes by binding to the as-1 cis-element in target gene promoters to regulate transcriptional activation or repression. Despite its functional significance, systematic characterization of TGA genes in cotton (Gossypium spp.) remains insufficient. Methods: In this study, we performed a comprehensive genome-wide identification and phylogenetic analysis of TGA members across 10 Gossypium species and verified the functions of candidate genes using VIGS technology. Results: A total of 74 TGA homologous genes with conserved DOG1 and bZIP domains were identified. Evolutionary analysis revealed that the cotton TGA gene family can be classified into five distinct branches, suggesting functional diversification. Functional prediction analyses indicated these genes in cotton growth regulation and stress adaptation, potentially through hormone-mediated signaling pathways. Expression profiling demonstrated both tissue-specific expression patterns and salt-stress responsiveness in Gossypium hirsutum TGA genes, and GhTGA2 exhibited the most significant up-regulated expression under salt stress. Virus-induced gene silencing (VIGS)-mediated GhTGA2 silencing significantly reduced the salt tolerance in cotton. Conclusions: The TGA gene family is involved in regulating cotton growth, development, and stress responses, and plays a critical role in mediating salt stress tolerance in cotton. Our results provide mechanistic insights into cotton stress adaptation and establish a valuable genetic resource for developing elite salt-tolerant cotton cultivars, with direct implications for sustainable cotton production. Full article

Salt stress is a major abiotic factor limiting wolfberry (Lycium barbarum) growth. As a high-value medicinal and edible crop, wolfberry relies on its carotenoid content, a critical determinant of fruit quality and nutritional value. To elucidate the expression regulatory mechanisms of key genes in the carotenoid biosynthesis pathway under salt stress, this study systematically identified 17 structural genes within the L. barbarum carotenoid pathway using genomic and transcriptomic approaches. Comprehensive analyses were conducted on gene structure, chromosomal distribution, conserved domains, and cis-acting elements. The results revealed that these genes were clustered on chromosomes Chr08 and Chr10 and exhibit strong collinearity with tomato (18 syntenic pairs). Their promoters were enriched with light-responsive (G-box) and stress-responsive (ABRE, DRE) elements. Tissue-specific expression analysis demonstrated high expression in mid-to-late fruit developmental stages (LbaPSY1, LbaPDS) and in photoprotective genes (LbaZEP, LbaVDE) in leaves. Under 300 mM NaCl stress treatment, the genes exhibited a staged response: Early stage (1–3 h): upstream MEP pathway genes (LbaDXS, LbaGGPS) were rapidly induced to supply precursors. Mid-stage (6–12 h): midstream genes (LbaPSY, LbaPDS, LbaZDS) were continuously upregulated, promoting lycopene synthesis and preferentially activating the β-branch (LbaLCYB). Late stage (12–24 h): downstream xanthophyll cycle genes (LbaBCH, LbaZEP, LbaVDE) were significantly enhanced, facilitating the accumulation of antioxidant compounds like violaxanthin and neoxanthin. This coordinated regulation formed a synergistic “precursor supply–antioxidant product” network. This study revealed the phased and coordinated regulatory network of carotenoid biosynthesis genes under salt stress in L. barbarum. It also provided potential target genes for the new cultivar selection with enhanced salt tolerance and nutritional quality. Full article

Phosphoethanolamine N-methyltransferase (PEAMT) is a key enzyme that catalyzes three successive methylation steps of phosphoethanolamine (P-EA) to phosphocholine (P-Cho). Meanwhile, P-Cho is a major precursor of phosphatidylcholine (PC) and glycine betaine (GB), which are involved in cell signal transduction, stress response, etc. Therefore, the PEAMT gene plays an essential role in plant growth and development as well as stress resistance. There are two homologous PEAMT genes in rice (Oryza sativa L. ssp. japonica), namely, OsPEAMT1 and OsPEAMT2. However, there has not been any comprehensive functional analysis of these two genes. Here, we employed bioinformatics methods to analyze the amino acid sequences and promoters of OsPEAMT1 and OsPEAMT2, and found that both proteins contain two methyltransferase domains. OsPEAMT1 is highly similar with ZmPEAMT, and OsPEAMT2 is closely related to LmPEAMT and TaPEAMT. There are abundant plant hormone response elements, stress response elements and low-temperature response elements in the promoters of OsPEAMT1 and OsPEAMT2. The in vitro enzymatic activity assays of recombinant proteins of OsPEAMT1 and OsPEAMT2 indicated that they can catalyze the production of P-Cho from P-EA, respectively. Meanwhile, the endogenous P-Cho content increased significantly (p < 0.05) when exogenous P-EA was added to rice. These indicate that OsPEAMT1 and OsPEAMT2 proteins have catalytic functions in vivo and in vitro. The expression patterns of both genes are different in different tissues, flowers and seeds at various developmental stages. Additionally, both genes have different responses to salt and low-temperature stress. This study supplies valuable insights into the function of OsPEAMT1 and OsPEAMT2, and it will provide key targets for rice molecular breeding, offering important insights for the development of rice with stress resistance and high yield. Full article

The PLATZ gene family influences plant growth, development, and responses to both biotic and abiotic stresses. Flax (Linum usitatissimum L.), an important oilseed and fiber crop, has not been extensively studied for its PLATZ genes. In this study, 27 LuPLATZ genes were identified in the recently assembled T2T (Telomere-to-Telomere) flax genome through bioinformatics analyses. Phylogenetic analysis grouped these genes into five subfamilies. Examination of gene structure and motifs showed conserved exon–intron arrangements and similar motif compositions within the same clade. Promoter analysis revealed that most cis-elements are associated with plant hormone responses (such as MeJA and ABA) and abiotic stresses, including anaerobic induction, drought, and low temperature. Duplication analysis identified 33 segmental duplication events, and miRNA target prediction indicated that lus-miR167 is the primary regulator of LuPLATZ genes. Expression profiling based on RNA-seq data showed high expression levels of most LuPLATZ genes in leaves and roots, and qRT-PCR confirmed their stress-responsive expression under cold, drought, and salt conditions, with LuPLATZ14 and LuPLATZ21 significantly upregulated in all treatments. Furthermore, overexpression of these two genes enhanced drought tolerance in yeast transformants. Full article

In recent years, paper-based humidity sensors have emerged as a highly promising technology for humidity detection. In this work, a polymerizable deep eutectic solvent (PDES) was prepared via a one-step blending method, which was applied to modify filter paper. The modification process did not alter the overall structure of the paper cellulose but rather targeted only its internal cellulose channels, thereby minimizing any impact on the paper’s original moisture-independent properties. The filter paper functioned both as the substrate and the humidity-sensing material in the fabricated sensor. The finger-like electrodes were designed using AutoCAD 2018 software and then printed onto the modified paper using screen-printing technology to fabricate the humidity sensor. Different saturated salt solutions were used to simulate corresponding humidity environments and evaluate the humidity performance of sensors. Compared with that of the blank paper-based humidity sensor, the sensitivity of the sensor modified by the PDES was significantly greater, and the recovery time was greatly shorter. Specifically, the sensitivity increased from 1.34 to 10.36 at 54% RH and from 166.24 to 519.2 at 98% RH. Additionally, the sensor response time was reduced from 728 s to 137 s. PDES modification significantly improved the moisture-sensitive characteristics and detection performance of the sensor. Full article

Introduction: The ability of salt-processed Alismatis Rhizoma (SAR) (Alisma plantago-aquqtica L.) to nourish Yin and promote urination is stronger than that of Alismatis Rhizoma (AR). However, there are few studies focused on evaluating the quality of its medicinal materials. Objectives: This study aimed to identify potential quality markers (Q-markers) for SAR, thereby providing a more reliable basis for its quality control and clinical application. Methods: Q-markers were identified through fingerprinting and chemical pattern recognition analysis of 15 batches of SAR. The diuretic effects of these markers were then verified by network analysis and molecular docking. Results: HPLC fingerprints of 15 SAR batches were established, with similarity analysis showing values > 0.85 (0.852–0.990). Chemical pattern recognition identified six critical compounds contributing to SAR quality: alisol F, alisol C 23-acetate, alisol A, alisol A 24-acetate, alisol B 23-acetate, and an alisol O isomer (VIP > 1.0). Network analysis revealed 76 overlapping targets between these compounds and diuretic-related diseases, with core targets including non-receptor tyrosine kinase (SRC), epidermal growth factor receptor (EGFR), mitogen-activated protein kinase 1 (MAPK1), which were identified through protein–protein interaction (PPI) network analysis, with degrees of 27, 24, and 22, respectively. Key pathways involved were the EGFR tyrosine kinase inhibitor resistance pathway, calcium signaling pathway, tumor necrosis factor signaling pathway, etc. Molecular docking confirmed strong binding interactions between the Q-markers and the hub targets, particularly alisol B 23-acetate with MAPK1 (−60.10 kcal·mol⁻¹) and alisol A 24-acetate with EGFR (−46.14 kcal·mol⁻¹) and SRC (−48.86 kcal·mol⁻¹). The diuretic effects of SAR are likely mediated through anti-inflammatory actions and regulation of water–sodium balance via multi-target and multi-pathway mechanisms. Conclusion: This study provides a robust foundation for quality control and clinical application of SAR, though further in vivo validation is warranted. Full article

Coastal ecosystems, located at the interface of terrestrial and marine environments, provide significant ecological functions and resource value. Coastal salt pans, as critical coastal resources with significant implications for coastal ecosystem health and resource management, have attracted extensive research attention. However, current studies on the extraction of spatiotemporal patterns of coastal salt pans remain relatively limited and superficial. This study takes coastal salt pans in Laizhou Bay as a case study, proposing a hierarchical classification method—Salt Pan Feature-Enhanced Fusion Image Random Forest (SPFEFI-RF)—based on multi-index synergy guidance and deep-shallow feature fusion, achieving high-precision extraction of coastal salt pans. First, a Modified Water Index (MWI) and Salt Pan Crystallization Index (SCI) were constructed from image spectral features, specifically targeting the extraction of evaporation ponds. Concurrently, a salt pan sample dataset was developed for the DeepLabv3+ (DL) method to extract deep semantic features and perform multi-scale feature fusion. Subsequently, a three-channel fusion strategy—R(MWI)-G(SCI)-B(DL)—was employed to produce the Salt Pan Feature-Enhanced Fusion Image (SPFEFI), enhancing distinctions between salt pans and background land cover. Finally, the Random Forest (RF) classifier using shallow spectral features was applied to extract salt pan information, further optimized by spatial domain denoising techniques. Results indicate that the SPFEFI-RF approach effectively extracts coastal salt pan features, achieving an overall accuracy of 92.29% and a spatial consistency of 85.14% with ground-truth data. The SPFEFI-RF method provides advanced technical support for high-precision extraction of global coastal salt pan spatiotemporal characteristics, optimizing coastal zone management decisions and promoting the sustainable development of coastal ecosystems and resources. Full article