Search Results (4,978)

Transformer fires within indoor substations constitute severe hydrocarbon fire scenarios characterized by rapid heat release rates and extreme peak temperatures, posing a critical threat to the structural integrity of steel frameworks and power grid stability. To rigorously assess structural safety under such conditions, this study employs a sequential thermal-mechanical coupled numerical methodology combining Computational Fluid Dynamics (CFD) and Finite Element Analysis (FEA). Focusing on a 110 kV indoor substation, the research simulates the transient, non-uniform temperature fields induced by transformer oil combustion and analyzes the thermo-mechanical response of key steel components. Furthermore, the protective efficacy of two non-intumescent coatings (Material A and Material B) with distinct thermal conductivities is systematically evaluated. Computational results elucidate significant thermal stratification, with upper-level structures sustaining exposure to temperatures exceeding 1500 K. Unprotected steel components subjected to direct flame impingement exhibit severe stress concentrations and plastic deformation, reaching their load-bearing limit within 4825 s. The application of fire-retardant coatings markedly enhances fire resistance; a 5 mm layer of Material A (λ = 0.20 W/(m·K)) extends the time to failure to approximately 9390 s. Notably, increasing the thickness of Material A to 20 mm, or alternatively employing a 10 mm layer of Material B (λ = 0.10 W/(m·K)), effectively mitigates thermal stress concentrations. This ensures structural deformation remains within safe limits throughout a 3 h (10,800 s) fire duration. This study provides a theoretical basis and quantitative engineering references for the optimal fire protection design of substation steel structures. Full article

Enteric viral infections represent a major concern for poultry production, causing growth retardation, impaired feed conversion, and increased mortality, particularly in young birds. To investigate the involvement of RNA and DNA enteric viruses in flocks exhibiting growth problems, seven poultry farms in southern Germany, including broiler, pullet, and breeder operations, were examined for the presence of chicken astrovirus (CAstV), avian reovirus (ARV), and fowl adenovirus-1 (FAdV-1) by means of RT-PCR. All farms exhibited growth retardation, diarrhea, and enteritis-associated lesions. Histopathology revealed features of runting–stunting syndrome in most of the broiler farms and depletion of lymphatic tissue in most of the pullet farms. CAstV was detected in all flocks, ARV in six, and FAdV-1 in four farms. To further characterize the viral agents, metagenomic sequencing of cecal tonsils from one severely affected broiler flock confirmed the presence of a CAstV strain identical (100%) to CAV/Belgium/4134_001/2019. In addition, the complete genome of avian Sicinivirus was assembled for the first time in Germany, showing 96.8% nucleotide identity with a Dutch strain (Chicken/NLD/2019/V_M_056_picorna_2). These findings demonstrate the widespread circulation and co-infection of enteric viruses on German poultry farms and underline the transboundary nature of these infections, emphasizing the need for enhanced surveillance and biosecurity measures to mitigate their impact on poultry health and productivity. Full article

Achieving stable dispersion and sustained antibacterial activity of natural bioactive compounds in bio-based packaging remains challenging. In this study, chitosan (CS) films incorporating a β-cyclodextrin–curcumin inclusion complex (Cur/β-CD) were developed to improve film properties and the refrigerated preservation of sea bass. The CS/Cur/β-CD films were prepared by one-step solution casting without intermediate isolation or purification. The inclusion conditions were optimized, and the resulting films were evaluated in terms of tensile strength (TS), elongation at break (EAB), and water vapor permeability (WVP). Among the tested formulations, the film prepared at a Cur:β-CD ratio of 1:1, 40 °C, and 1 h (1:1 40 °C 1 h) showed the best overall performance in TS, EAB, and WVP. It was therefore selected for subsequent structural characterization, antibacterial evaluation, and preservation testing. The 1:1 40 °C 1 h film exhibited a 156% increase in tensile strength and a 28.5% decrease in water vapor permeability compared with the neat CS film. The composite film exhibited measurable diffusion-based antibacterial activity against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). During the 8 d refrigerated storage period, the film suppressed total viable counts (TVC), slowed the increase in pH, and retarded total volatile basic nitrogen (TVB-N) accumulation, thereby maintaining acceptable microbiological quality throughout the observation period. Compared with the unwrapped, PE, and CS-film control groups, the treated samples showed better preservation performance over the tested storage period. Overall, the incorporation of Cur/β-CD provides a simple strategy for improving the mechanical strength, moisture barrier properties, antibacterial activity, and preservation performance of CS films during refrigerated storage, highlighting their potential for active packaging of chilled aquatic products. Full article

Environmental fires pose a serious threat to energy security, ecosystems and public safety, whilst traditional halogenated flame retardants suffer from limitations such as high environmental residue risks and insufficient flame-retardant efficacy. In this study, sodium alginate (SA) was utilised as the matrix, with the incorporation of ammonium polyphosphate (APP) and phytic acid (PA), in conjunction with SiO₂-APTES surface modification, to prepare nitrogen–phosphorus synergistic bio-based flame-retardant gels. The present study systematically investigated the influence of the N/P molar ratio on the gelation kinetics, rheological behaviour, microstructure and flame-retardant performance of the gel. The study revealed a nitrogen–phosphorus coupled gas–solid two-phase synergistic flame-retardant mechanism. The results indicate that at an N/P ratio of 1/4, the gel forms a stable dual-network structure comprising ionic cross-links and Si–O–P covalent bonds. In the gas phase, the thermal decomposition of APP releases inert NH₃, which dilutes oxygen and quenches gas-phase radicals (·OH, ·H). In the condensed phase, the phosphate groups of PA-catalysed SA form Si–O–P covalent bonds with SiO₂ under the mediation of APTES, creating a dense, insulating char layer. In comparison with the control group (N/P = 0/0), the optimal gel sample (N/P = 1/4) demonstrated a 33% increase in shear stress, a 10% reduction in the peak heat release rate (HRR), a 75% decrease in total smoke production (TSP), and a 150% increase in char layer thickness after combustion, while maintaining adequate mechanical strength, thermal stability, and environmental friendliness. This work provides novel insights and strategies for the development of green, highly efficient flame-retardant materials for environmental fire prevention and control. Full article

Natural fibers are among the most extensively exploited bio-based materials in industry due to their abundance, affordability, and biodegradability. However, their intrinsic properties often require improvement through chemical, mechanical, or enzymatic treatments to expand their applications. Phosphorylation is a highly effective chemical modification that enables the covalent grafting of phosphate groups onto the fiber backbone. These functionalities enhance hydrophilicity, anionic charge density, swelling capacity, and water uptake, while significantly improving flame-retardant performance. In addition, phosphorylation can reduce energy consumption and production costs in the manufacture of functionalized micro- and nanofibrillated fibers, as the increased swelling facilitates fibrillation. Consequently, phosphorylated fibers are suitable for water treatment, biomedical devices, construction materials, and other advanced materials. Dozens of reagents and various synthetic routes have been explored to perform this reaction, each producing materials with distinct properties. Phosphorus content remains the primary parameter used to assess modification efficiency. This literature review examines existing phosphorylation methods, including reagents, substrates, and characterization techniques, and discusses applications such as flame retardancy, thermal insulation, ion exchange, energy storage, electrodes, and battery recycling. It also briefly addresses key challenges, including limited hydroxyl accessibility, control of the degree of substitution, potential cellulose degradation, and scalability constraints. Full article

Background and clinical significance: Autoimmune encephalitis (AE) is an inflammatory brain disorder that manifests through a diverse, unspecific range of neuropsychiatric symptoms. When AE occurs alongside a primary neurodegenerative disorder, the shared symptoms can create a mixed clinical profile, making diagnosis more difficult and potentially postponing effective management and treatment. Case presentation: We describe the case of a 58-year-old female with a one-year history of progressive behavioral and personality changes who presented a subacute confusional state, psychomotor retardation alternating with psychomotor agitation, apathy, visual hallucinations, and motor symptoms. Examination revealed Parkinsonian symptoms and frontal lobe signs. Neuroimaging showed frontotemporal atrophy, while cerebrospinal fluid analysis excluded infection but demonstrated elevated phosphorylated tau, supporting an underlying neurodegenerative process. An electroencephalogram revealed asymmetric temporal slowing without overt epileptiform activity. An initial diagnosis of behavioral variant frontotemporal dementia (bvFTD) was established. Due to rapid clinical deterioration and fluctuating cognition, autoimmune testing was expanded to a full antibody panel, which identified elevated serum anti-glutamic acid decarboxylase 65 (anti-GAD65) antibodies (60 UI/mL, reference range 0–5 UI/mL), establishing a possible coexisting diagnosis of anti-GAD65 autoimmune encephalitis. Initial treatment with intravenous immunoglobulin produced minimal improvement; however, therapeutic plasma exchange led to the remission of psychosis and significant improvement in rigidity, bradykinesia, and attention, with modest amelioration in global cognition. Conclusions: This case highlights the diagnostic challenges posed by overlapping AE and bvFTD clinical pictures, especially when neurodegenerative features obscure an underlying autoimmune process. Early, panel-based neural antibody testing—and consideration of AE even in patients already diagnosed with a major neurocognitive disorder—is critical for avoiding delays in immunotherapy. Prompt recognition and treatment of AE may substantially improve clinical outcomes, even in complex cases with suspected overlap. Full article

Blueberries are widely consumed due to their richness in nutrients, yet they are also prone to quality deterioration after being harvested, even at cold temperatures. Non-thermal physical technology is an important auxiliary method worth considering for maintaining the quality of this fruit while refrigerated. In this study, a static magnetic field (SMF) was applied as a complementary pretreatment strategy prior to cold storage of blueberries. The optimal SMF parameters were identified as 5 mT exposure for 12 h, as this significantly retarded decay and softening. The contents of ascorbic acid, total polyphenols, flavonoids and proanthocyanidins were elevated by 20.0%, 17.7%, 23.9%, and 9.1%, respectively. Concurrently, DPPH (1,1-diphenyl-2-picrylhydrazyl) radical-scavenging capacity, catalase (CAT), and superoxide dismutase (SOD) activity markedly improved. Targeted metabolomic analysis revealed that SMF pretreatment significantly regulated polyphenol metabolic pathways and redirected polyphenol biosynthesis toward more stable and functional compounds, including three hydroxycinnamic acids, quercetin, dihydromyricetin, glycosylated hesperetin, and acylated delphinidin derivates. The synergistic effect of these SMF-elevated phenolics and the reinforced antioxidant system preserved the overall cold-storage quality of blueberries. These findings underscore the potential of SMF pretreatment as an effective physical technique for reducing postharvest blueberry losses. Full article

As demand for energy-efficient buildings grows, the use of expanded polystyrene (EPS) insulation is expected to increase, intensifying the need for material-efficient strategies such as recycling and reuse. This study investigates the technical feasibility, chemical safety, and climate implications of reusing EPS insulation recovered from building and infrastructure applications. EPS boards with service lives exceeding 20 years were collected from demolition sites and characterised for density, compressive strength, thermal conductivity, and hazardous substance content. Measured material properties were compared with historical test reports from 1976 to 2009 to assess long-term performance. The thermal conductivity and compressive strength of the used EPS samples fell within or close to the 95% prediction intervals for the corresponding products at the time of production, indicating limited long-term degradation. No brominated flame retardants or other substances of concern were detected above the detection limits. Life cycle assessment (LCA) results showed that reuse provides greater greenhouse gas (GHG) emission reduction potential than improved recycling alone, primarily through avoided virgin EPS production and reduced processing needs. An important insight from this study is that key material properties of used EPS can be reliably estimated from simple measurements of density, dimensions, and weight, and that direct reuse is feasible for less demanding applications. Additionally, further work is needed to test additional samples from diverse demolition sites across various applications and climates to establish a consistent basis for reuse. Full article

Novel brominated flame retardants (NBFRs), including 1,2-bis(2,4,6-tribromophenoxy)ethane (BTBPE), are emerging endocrine-disrupting chemicals, though their direct effects on female gamete maturation remain insufficiently characterized. In this study, we used a refined zebrafish oocyte in vitro maturation (IVM) model integrating germinal vesicle breakdown (GVBD) assessment with real-time, image-based oocyte diameter quantification. The workflow incorporated donor-condition optimization and diameter-based quality control during sorting. Oocytes from donors 4 to 5 months post-fertilization (mpf) showed more consistent diameter dynamics at the dish level than those from donors 3 to 4 mpf. Mixed-sex co-housing was associated with higher GVBD and larger Δdiameter than separated housing, although this comparison should be considered preliminary. Under DHP induction, BTBPE (1–1000 nM) consistently suppressed GVBD and attenuated maturation-associated diameter increases, with a non-monotonic-like response pattern. These findings indicate that BTBPE impairs oocyte maturation competence in vitro and supports real-time morphometric tracking as a practical QC component for zebrafish IVM workflows. Full article

Epidemiological studies have demonstrated that kidney aging is a risk factor for acute kidney injury (AKI) and chronic kidney disease (CKD). Therefore, understanding the mechanisms of kidney aging is key to designing novel anti-kidney aging strategies. In this regard, animal models of kidney aging are essential tools. In this review article, we focus on D-galactose (D-gal)-induced accelerated aging in rodents. This animal aging model is a popular and widely used experimental method in the field of aging and aging-related degenerative disorders. It has been shown that the major characteristics of the D-gal-induced aging process are increased oxidative stress, decreased antioxidant enzymes, elevated cell death, increased tissue fibrosis, and accumulation of inflammatory mediators. This review focuses on D-gal-induced kidney aging in mice and rats, with discussions on both kidney aging mechanisms and anti-kidney aging regimens using this model. It is our belief that D-gal induction of accelerated kidney aging will continue to be used as a convenient platform for elucidating kidney aging mechanisms and exploring novel anti-kidney aging targets that may slow down kidney aging and retard the development of aging-related renal disorders. Full article

With the requirement for reducing carbon footprint in engineering construction, porous vegetation concrete is increasingly receiving attention for use in completed slope restoration. Cemented soil is introduced after the completion of porous vegetation concrete stabilization and functions mainly as a revegetation substrate. An important consideration for cemented soil in this application is its ability to maintain strength and water stability and possess moisture retention capacity, without causing much increase in alkali release or diffusion. This present study investigated a newly developed twofold stabilization system involving both cement binders and organic waterborne epoxy resin to meet the requirements of synthetically enhancing slope stabilization and restoration. Changes in the unconfined compressive strength and water stability were analyzed, whilst mineralogical composition and microstructure characteristics were investigated. The results indicated that moderate incorporation of triethylenediamine (TETA)-cured epoxy resin (1–2% by soil mass) moderately reduced strength and increased water stability with controlled alkali release in cemented soil. Mineralogical and microstructural analysis revealed that TETA-cured epoxy resin retarded cement hydration and refined particle bonding, exhibiting less consolidated pore structure characteristics. The twofold stabilization was exceptional in enhancing structural stability exposed to repeated humidity variation, albeit it yielded increased strength reduction rate from <7% to 9–16% under UV irradiation. Potentials of calcium sulfoaluminate cement and Portland slag cement were also investigated. A pilot-scale vegetation trial with representative plant species gave general agreement with effects observed in the laboratory in alkali reduction and moisture retention. The results provided an ecological approach for better restoring completed slopes that were stabilized using porous vegetation concrete. Full article

For cable compound manufacturers, accurate formulation fine-tuning is essential to ensure safety, long-term durability, and compliance with international standards for dielectric strength, volume resistivity, and environmental and thermal ageing. This work presents an experimental study demonstrating how minor additives can critically affect the performance of complex flame-retardant elastomeric formulations. The investigation focuses on the role of small amounts of zinc oxide (ZnO) in commercial cable compounds based on a crosslinked elastomeric matrix composed of ethylene–propylene monomer (EPM), ethylene–propylene–diene monomer (EPDM), and thermoplastic polyolefin elastomer (POE). The formulations contain aluminium trihydroxide (ATH) as the major filler, together with several minor additives. Among these, a phenolic antioxidant (AN01) acting as a metal deactivator is also present. The addition of ZnO in low amounts (2–5 phr) allowed the compounds to maintain a volume resistivity ≥ 10¹² Ω·cm in water at 100 °C. To elucidate the role of ZnO, a systematic set of formulations was prepared by varying the type and content of selected additives. The compounds were prepared by melt mixing in an internal mixer (Banbury type), followed by peroxide crosslinking via compression molding. Electrical characterization results indicate that ZnO interacts with the phenolic additive through surface adsorption, forming a coated particle with significantly reduced electrical conductivity. Optimal electrical performance was achieved when the ZnO-to-additive ratio corresponded to the minimum amount required for complete surface complexation. Full article

A ternary gel composed of polyvinyl alcohol (PVA), polyethyleneimine (PEI), and polyaluminum chloride (PAC) was prepared to address the limited controllability of gelation and the insufficient high-temperature resistance to re-ignition observed in existing mine fire prevention and extinguishing gels. Based on an orthogonal experimental design, the optimal formulation was identified as 14% PVA, 7% PEI, and 5.5% PAC (by mass), achieving a gelation time of 8.2 min. Microscopic characterization revealed that the gel forms a dense, interconnected three-dimensional network structure capable of effectively encapsulating the coal particles. Fourier transform infrared spectroscopy (FTIR) analysis showed that gel treatment resulted in a 29.8% reduction in the peak area of free hydroxyl groups. Thermogravimetric–differential scanning calorimetry (TG-DSC) analysis indicated that the gel increased the ignition temperature by 33.27 °C and shifted the maximum exothermic peak temperature by 13.28 °C. Fire suppression experiments demonstrate that the gel could continuously lower the temperature of high-temperature coal without re-ignition, demonstrating significantly superior performance compared to traditional sodium silicate gel. This gel achieves highly efficient fire prevention and suppression through the cooperative effects of water retention, oxygen barriers, and chemical passivation, providing a new material for the prevention and control of spontaneous coal combustion in deep mines. Full article

With the constant development of new polymer chemistry technologies, it is necessary to find modern synthetic pathways for the synthesis of polymers bearing numerous applicable characteristics, in an easy, efficient and environmentally friendly way. One such possibility is to present the use of metathesis type reactions and more specifically ring-opening metathesis polymerisation (ROMP), which provides the opportunity to produce linear unsaturated functionalised polymeric chains in a ‘living’ yet controlled manner with the use of ruthenium-based carbene (Ru=CHR) Grubbs’ catalysts (initiators: G1, G2, G3). In order to achieve satisfying results and obtain full conversion of the monomers, sterically hindered molecules are preferred, because the process of opening the ring results in simultaneous release of the energy that propagates the whole process. The incorporation of silicon-based substituents (such as silyl ethers) into the norbornene matrix can provide higher thermal stability of polymers, leading to the creation of flame-retardant materials. Other applications include gas separation membranes or biomedicine, upon further modification. This paper focusses on the development and optimisation of the synthetic method of previously not reported exo-norbornene silyl ethers along with their metathesis polymerisation to achieve linear unsaturated polymers with high isolation yields. Full article

Background: The transition from fossil-derived polymer additives to renewable alternatives is essential to mitigate environmental persistence and ensure chemical safety within the plastics industry. This review provides a comprehensive overview of recent developments in bio-based functional additives and their integration into circular economy frameworks. Methods: Following PRISMA guidelines, a systematic literature search was conducted using the Scopus database for studies published between 2023 and 2026. Search terms targeted bio-based plasticizers, flame retardants, antioxidants, and compatibilizers. Studies were screened against predefined inclusion criteria, specifically focusing on experimental validation in polymer matrices, while data mining was employed to map emerging research fronts. Results: From an initial 996 records, 54 studies were selected after removing duplicates and ineligible articles. The findings highlight a paradigm shift from passive physical fillers toward active, multifunctional macromolecular agents. Recent literature demonstrates that targeted molecular interventions, such as phosphorylated lignin and biomimetic structures, can resolve trade-offs between ductility and thermal stability at low loadings (<5 wt%). Synthesis routes, performance outcomes, and end-of-life trajectories for each additive class are summarized. Conclusions: Bio-based additives have evolved from simple substitutes into strategic tools for the molecular programming of sustainable polymers. Although challenges regarding scalability and high-temperature processing persist, their integration into circular economy strategies establishes a clear roadmap for next-generation bioplastics. Full article