Search Results (826)

To solve the present housing crisis, the Support for Access to Housing Program, in the context of PRR, mainly focuses on social housing to be built or on housing of social interest to be regenerated. To approach this problem, a research question was raised: “What is the significance of the existing cooperative housing in solving the current housing crisis?” To analyze this issue, a multiple case study was adopted, comparing a collective dwelling of cooperative promotion at controlled costs in Caselas (1980s–1990s) with Expo Urbe (2000–2007) in Parque das Nações, a symbol of the new sustainable cooperative housing, which targets a population with a higher standard of living and thus is excluded from the PRR plan. These cases revealed the discrepancy created by the Cooperative Code of 1998 and its consequences for the urban regeneration of this heritage. They show that Caselas, built in a residential urban neighborhood, is strongly attached to a community, provides good social inclusion for vulnerable groups at more affordable prices, and it is eligible for urban regeneration and reuse (for renting or buying). However, the reuse of Caselcoop’s edifices cannot compromise their cultural and residential values or threaten the individual integrity. Full article

This research addresses urban inequality by focusing on the rehabilitation of communal rooftops in Ciutat Vella, Barcelona, the city’s historic district, where residential vulnerability is concentrated in a particularly dense heritage urban environment with a shortage of outdoor spaces. Using participatory methodologies, this research develops low-cost, removable, and recyclable prototypes aimed at improving social interaction, technical performance, and environmental conditions. The focus is on vulnerable populations, particularly the elderly. The approach integrates a bottom–up process and scalable solutions presented as a Toolkit of micro-projects. These micro-projects are designed to improve issues related to health, safety, durability, accessibility, energy savings, and acoustics. In addition, several possible material solutions for micro-projects are examined in terms of sustainability and cost. These plug-in interventions are designed for adaptability and replication throughout similar urban contexts and can significantly improve the quality of life for people, especially the elderly, in dense historic environments. Full article

Demand Side Management (DSM) plays a crucial role in modern energy systems, enabling more efficient use of energy resources and contributing to the sustainability of the power grid. This study examines DSM strategies within a multi-environment context encompassing residential, commercial, and industrial sectors, with a focus on diverse appliance types that exhibit distinct operational characteristics and user preferences. Initially, a single-objective optimization approach using Genetic Algorithms (GAs) is employed to minimize the total energy cost under a real Time-of-Use (ToU) pricing scheme. This heuristic method allows for the effective scheduling of appliance operations while factoring in their unique characteristics such as power consumption, usage duration, and user-defined operational flexibility. This study extends the optimization problem to a multi-objective framework that incorporates the minimization of CO₂ emissions under a real annual energy mix while also accounting for user discomfort. The Non-dominated Sorting Genetic Algorithm II (NSGA-II) is utilized for this purpose, providing a Pareto-optimal set of solutions that balances these competing objectives. The inclusion of multiple objectives ensures a comprehensive assessment of DSM strategies, aiming to reduce environmental impact and enhance user satisfaction. Additionally, this study monitors the Peak-to-Average Ratio (PAR) to evaluate the impact of DSM strategies on load balancing and grid stability. It also analyzes the impact of considering different periods of the year with the associated ToU hourly schedule and CO₂ emissions hourly profile. A key innovation of this research is the integration of detailed, category-specific metrics that enable the disaggregation of costs, emissions, and user discomfort across residential, commercial, and industrial appliances. This granularity enables stakeholders to implement tailored strategies that align with specific operational goals and regulatory compliance. Also, the emphasis on a user discomfort indicator allows us to explore the flexibility available in such DSM mechanisms. The results demonstrate the effectiveness of the proposed multi-objective optimization approach in achieving significant cost savings that may reach 20% for industrial applications, while the order of magnitude of the trade-offs involved in terms of emissions reduction, improvement in discomfort, and PAR reduction is quantified for different frameworks. The outcomes not only underscore the efficacy of applying advanced optimization frameworks to real-world problems but also point to pathways for future research in smart energy management. This comprehensive analysis highlights the potential of advanced DSM techniques to enhance the sustainability and resilience of energy systems while also offering valuable policy implications. Full article

This research considers a preliminary comparative technical evaluation of two micro-gas turbine (MGT) systems in combined heat and power (CHP) mode (100 kWe), aimed at supplying heat to a residential community of 15 average-sized buildings located in Central Europe over a year. Two systems were modelled in Ebsilon 15 software: a natural gas case (benchmark) and an ammonia-fueled case, both based on the same on-design parameters. Off-design simulations evaluated performance over variable ambient temperatures and loads. Idealized, unrecuperated cycles were adopted to isolate the thermodynamic impact of the fuel switch under complete combustion assumption. Under these assumptions, the study shows that the ammonia system produces more electrical energy and less excess heat, yielding marginally higher electrical efficiency and EUF (26.05% and 77.63%) than the natural gas system (24.59% and 77.55%), highlighting ammonia’s utilization potential in such a context. Future research should target validating ammonia combustion and emission profiles across the turbine load range, and updating the thermodynamic model with a recuperator and SCR accounting for realistic pressure losses. Full article

The landscapes of the Arctic seem endless. But they are also subject to anthropogenic impact, especially in urbanized and industrial ecosystems. The population of the Arctic zone of Russia is extremely urbanized, and up to 84% of the population lives in cities and industrial settlements. In this regard, we studied the background soils of forests and tundras and the soils of settlements. The main signs of the urbanogenic morphogenesis of soils associated with the transportation of material for urban construction are revealed. The peculiarities of soils of recreational, residential, and industrial zones of urbanized ecosystems are described. The questions of diversity and the classification of soils are discussed. The specificity of bulk soils used in the construction of industrial structures in the context of the initial stage of soil formation is considered. For the first time, soils and soil cover of settlements in the central and southern parts of the Yamal region are described in the context of traditional pedology. It is shown that the construction of new soils and grounds can lead to both decreases and increases in biodiversity, including the appearance of protected species. Surprisingly, the forms of urban soil formation in the Arctic are very diversified in terms of morphology, as well as in the ecological functions performed by soils. The urbanization of past decades has drastically changed the local soil cover. Full article

This study was conducted in the context of China’s latest “double carbon” policy. The objective of this study was twofold: firstly, to examine the characteristics of traditional Chinese residential skywell; and secondly, to investigate and develop climate-adaptive technologies for these structures. To this end, a study was conducted on the Huizhou skywell architecture in China. Firstly, we obtained a large amount of basic data, such as traditional buildings and skywell parameters in Huizhou through field research and on-site mapping. Second, we combined a large number of parameters and typical cases to analyze the data and determine a more scientifically typical model of Huizhou architecture and experimental coverage of skywell data. Different shapes and sizes of skywell were formed by changing the combination of skywell length and width, and the indoor wind environments of these skywell dwelling models were simulated one by one using PHOENIX (v2016) software. Finally, the data obtained from these simulations are analyzed using the variable control method, and the simulated indoor wind environments of skywells under different scale combinations in terms of skywell length, width, and length–width coupling effects are summarized and compared. The following conclusions were drawn: (1) The length of the skywell has a certain effect on all indoor wind environments, and the variation in indoor wind speed is smallest when the length of the skywell is 7.5 m. When selecting the design size of the skywell, the length of the skywell can be increased accordingly. (2) The width of the skywell for the indoor wind environment is divided into two cases, when the length of the skywell is less than 3.75 m, increasing the width of the skywell will make the indoor wind environment more unstable. However, when the length of the skywell is greater than 3.75 m, the width of the skywell is positively related to the comfort of the indoor wind environment. (3) The area of the skywell should not be too large, usually between 11.25 m² and 18.75 m². A slender skywell is more likely to provide a comfortable indoor wind environment. (4) After extensive evaluation, we found that the comfort of the indoor wind environment is high when the width of the skywell is 2 m. The optimum dimensions for the ventilation performance of the skywell are 7.5 m in length and 2 m in width. Full article

The COVID-19 pandemic’s rapid shift to working from home has fundamentally challenged residential acoustic design, which traditionally prioritises rest and relaxation rather than sustained concentration. However, a clear gap exists in understanding how acoustic needs and the subjective evaluation of soundscape appropriateness (SA) differ between these conflicting activities within the same domestic space. Addressing this gap, this study reveals critical differences in how people experience and evaluate home soundscapes during work versus relaxation activities in the same residential spaces. Through an online survey of 247 Chinese participants during lockdown, we assessed soundscape perception attributes, the perceived saliencies of various sound types, and soundscape appropriateness (SA) ratings while working and relaxing at home. Our findings demonstrate that working at home creates a more demanding acoustic context: participants perceived indoor soundscapes as significantly less comfortable and less full of content when working compared to relaxing (p < 0.001), with natural sounds becoming less noticeable (−13.3%) and distracting household sounds more prominent (+7.5%). Structural equation modelling revealed distinct influence mechanisms: while comfort significantly mediates SA enhancement in both activities, the effect is stronger during relaxation (R² = 0.18). Critically, outdoor man-made noise, building-service noise, and neighbour sounds all negatively impact SA during work, with neighbour sounds showing the largest detrimental effect (total effect size = −0.17), whereas only neighbour sounds and outdoor man-made noise significantly disrupt relaxation activities. Additionally, natural sounds act as a positive factor during relaxation. These results expose a fundamental mismatch: existing residential acoustic environments, designed primarily for rest, fail to support the cognitive demands of work activities. This study provides evidence-based insights for acoustic design interventions, emphasising the need for activity-specific soundscape considerations in residential spaces. As hybrid work arrangements become the norm post-pandemic, our findings highlight the urgency of reimagining residential acoustic design to accommodate both focused work and restorative relaxation within the same home. Full article

People with severe mental disorders (SMD) face long-term functional impairments requiring integrated, community-based, recovery-oriented care. Italy provides two main housing models for people with SMD: private accommodation (PA) and supported accommodation (SA). This exploratory study investigated differences in recovery outcomes across these settings using the Mental Health Recovery Star (MHRS). A six-month longitudinal study was conducted within the South Verona Community Mental Health Service. Nineteen trained mental health professionals assessed 25 people with SMD (14 in PA, 11 in SA) at baseline (BL) and follow-up (FU) using standardized tools for recovery (MHRS), functioning, psychopathology, functional autonomy, and needs. Group comparisons and within-group changes were analyzed using paired and independent t-tests. At BL, people with SMD in PA showed better functioning (p = 0.040) and fewer needs than those in SA (p = 0.008). Recovery goals differed, with people with SMD in PA focusing on health and networks, while people with SMD in SA emphasized functioning. At FU, people with SMD in PA improved across all MHRS domains (p < 0.001), with significant reductions in symptom severity and unmet needs. People with SMD in SA showed targeted improvements in functioning, autonomy, and MHRS social networks (p < 0.001), with increases in met needs but non-significant changes in unmet needs. When comparing PA and SA at FU, the differences were relatively modest. Recovery is achievable in both housing settings, although outcomes differ. People with SMD in PA experienced broader improvements, while people with SMD in SA progressed in their prioritized areas, likely reflecting more complex initial needs. These findings underscore the value of aligning recovery-oriented care with the specific needs and contexts of different residential settings. Further research is needed to confirm and expand these results. Full article

Urban residential design influences local microclimates and human thermal comfort. This study combines empirical microclimate data with remotely sensed data on tree canopy cover, housing lot size, surface permeability, and roof colour to examine thermal differences between three newly built and three established residential suburbs in Western Sydney, Australia. Established areas featured larger housing lots and mature street trees, while newly developed suburbs had smaller lots and limited vegetation cover. Microclimate data were collected during summer 2021 under both heatwave and non-heatwave conditions in full sun, measuring air temperature, relative humidity, wind speed, and wet-bulb globe temperature (WBGT) as an index of heat stress. Daily maximum air temperatures reached 42.7 °C in new suburbs, compared to 39.3 °C in established ones (p < 0.001). WBGT levels during heatwaves were in the “extreme caution” category in new suburbs, while remaining in the “caution” range in established ones. These findings highlight the benefits of larger green spaces, permeable surfaces, and lighter roof colours in the context of urban heat exposure. Maintaining mature trees and avoiding dark roofs can significantly reduce summer heat and improve outdoor thermal comfort across a range of conditions. Results of this work can inform bottom-up approaches to climate-responsive urban design where informed homeowners can influence development outcomes. Full article

This paper looks at and describes the potential of using artificial intelligence in smart environments. Various environments such as houses and residential and commercial buildings are becoming smarter through the use of various technologies, i.e., various sensors, smart devices and elements based on artificial intelligence. These technologies are used, for example, to achieve different levels of security in environments, for personalized comfort and control and for ambient assisted living. We investigated the deep learning approach, and, in this paper, describe its use in this context. Accordingly, we developed four deep learning models, which we describe. These are models for hand gesture recognition, emotion recognition, face recognition and gait recognition. These models are intended for use in smart environments for various tasks. In order to present the possible applications of the models, in this paper, a house is used as an example of a smart environment. The models were developed using the TensorFlow platform together with Keras. Four different datasets were used to train and validate the models. The results are promising and are presented in this paper. Full article

Despite recent advances in deep learning for fire detection, much of the current research prioritizes model-centric metrics over dataset fidelity, particularly from a fire safety engineering perspective. Commonly used datasets are often dominated by fully developed flames, mislabel smoke-only frames as non-fire, or lack intra-video diversity due to redundant frames from limited sources. Some works treat smoke detection alone as early-stage detection, even though many fires (e.g., electrical or chemical) begin with visible flames and no smoke. Additionally, attempts to improve model applicability through mixed-context datasets—combining indoor, outdoor, and wildland scenes—often overlook the unique false alarm sources and detection challenges specific to each environment. To address these limitations, we curated a new video dataset comprising 1108 annotated fire and non-fire clips captured via indoor surveillance cameras. Unlike existing datasets, ours emphasizes early-stage fire dynamics (pre-flashover) and includes varied fire sources (e.g., sofa, cupboard, and attic fires), realistic false alarm triggers (e.g., flame-colored objects, artificial lighting), and a wide range of spatial layouts and illumination conditions. This collection enables robust training and benchmarking for early indoor fire detection. Using this dataset, we developed a spatiotemporal fire detection model based on the mixed convolutions ResNets (MC3_18) architecture, augmented with Convolutional Block Attention Modules (CBAM). The proposed model achieved 86.11% accuracy, 88.76% precision, and 84.04% recall, along with low false positive (11.63%) and false negative (15.96%) rates. Compared to its CBAM-free baseline, the model exhibits notable improvements in F1-score and interpretability, as confirmed by Grad-CAM++ visualizations highlighting attention to semantically meaningful fire features. These results demonstrate that effective early fire detection is inseparable from high-quality, context-specific datasets. Our work introduces a scalable, safety-driven approach that advances the development of reliable, interpretable, and deployment-ready fire detection systems for residential environments. Full article

This review examines the effect of geometric properties and the spacing of road humps on vehicle speed and noise, with a particular emphasis on South Asian contexts, especially Malaysia. Road humps are widely used traffic-calming devices designed to reduce vehicle speed and enhance road safety. The effectiveness of these measures is strongly influenced by parameters such as height, width, profile, and placement intervals. While the geometric optimization of humps generally improves speed-reduction outcomes, several studies indicate that braking and acceleration at humps can lead to increased traffic noise, particularly in residential and high-density areas. This review also explores design strategies and material choices (e.g., asphalt use, sinusoidal profiles) that may help mitigate noise impacts. Overall, a balance between speed control and noise management is necessary to ensure both safety and community acceptance. Full article

As part of the post-conflict reconstruction and recovery, the development of Kabul New City aims to bring relief to the existing capital city, Kabul, which has experienced exponential population growth, putting heavy pressure on its existing resources. Kabul New City is divided into four subsectors, and each of them is being developed and is expected to reach a target population by 2025, as defined by the master plan. The study’s objective is to determine which of the four zones are in demand and need to be prioritized for development, as per the model results. The data collection involves an online questionnaire, and the responses are collected from residents of Kabul and Herat. Agent-based modeling (ABM) is an emerging method of simulating urban dynamics. Cities are evolving continuously and are forming unique spatial patterns that result from the movement of residents in search of new locations that accommodate their needs and preferences. An agent-based model is developed using the weighted random selection process based on household size and income levels. The agents are the residents of Kabul and Herat, and the environment is the land use classification image using the Sentinel 2 image of Kabul New City. The barren class is treated as the developable area and is divided into four sub-sectors. The model simulates three alternative growth rate scenarios, i.e., ambitious, moderate, and steady. The results of the simulation reveal that the sub-sector Dehsabz South, being closer to Kabul city, is in higher demand. Barikab is another sub-sector high in demand, which has connectivity through the highway and is an upcoming industrial hub. Full article

Form-based design codes have emerged as a planning tool aimed at shaping the physical form of neighborhoods to reinforce local character and enhance sense of place (SoP). However, their effectiveness in delivering these outcomes remains underexplored. This study investigates the extent to which Buffalo’s Green Code—a form-based zoning ordinance—enhances SoP in residential environments, using Elmwood Village as a case study. A multi-scalar analytical framework assesses SoP at the building, street, and neighborhood levels. Empirical data were gathered through an online survey, while the neighborhood was systematically mapped into street segment blocks categorized by Green Code zoning. The study consolidates six Green Code classifications into three overarching categories: mixed-use, residential, and single-family. SoP satisfaction is analyzed through a two-step process: first, comparative assessments are conducted across the three zoning groups; second, k-means clustering is applied to spatially map satisfaction levels and evaluate SoP at different scales. Findings indicate that mixed-use areas are most closely associated with place identity, while residential and single-family zones (as defined by the Buffalo Green Code) yield higher satisfaction overall—though satisfaction varies significantly across spatial scales. These results suggest that while form-based codes can strengthen SoP, their impact is uneven, and more scale-sensitive zoning strategies may be needed to optimize their effectiveness in diverse urban contexts. This research overall offers an empirically grounded, multi-scalar assessment of zoning impacts on lived experience—addressing a notable gap in the planning literature regarding how form-based codes perform in established, rather than newly developed, neighborhoods. Full article

Amman’s rapid population growth and sprawling urbanization have resulted in car-centric, fragmented neighborhoods that lack social cohesion and are vulnerable to the impacts of climate change. This study reframes walkability as a climate adaptation strategy, demonstrating how pedestrian-oriented spatial planning can reduce vehicle emissions, mitigate urban heat island effects, and enhance the resilience of green infrastructure in peri-urban contexts. Using Deir Ghbar, a rapidly developing marginal area on Amman’s western edge, as a case study, we combine objective walkability metrics (street connectivity and residential and retail density) with GIS-based spatial regression analysis to examine relationships with residents’ sense of community. Employing a quantitative, correlational research design, we assess walkability using a composite objective walkability index, calculated from the land-use mix, street connectivity, retail density, and residential density. Our results reveal that higher residential density and improved street connectivity significantly strengthen social cohesion, whereas low-density zones reinforce spatial and socioeconomic disparities. Furthermore, the findings highlight the potential of targeted green infrastructure interventions, such as continuous street tree canopies and permeable pavements, to enhance pedestrian comfort and urban ecological functions. By visualizing spatial patterns and correlating built-environment attributes with community outcomes, this research provides actionable insights for policymakers and urban planners. These strategies contribute directly to several Sustainable Development Goals (SDGs), particularly SDG 11 (Sustainable Cities and Communities) and SDG 13 (Climate Action), by fostering more inclusive, connected, and climate-resilient neighborhoods. Deir Ghbar emerges as a model for scalable, GIS-driven spatial planning in rural and marginal peri-urban areas throughout Jordan and similar regions facing accelerated urban transitions. By correlating walkability metrics with community outcomes, this study operationalizes SDGs 11 and 13, offering a replicable framework for climate-resilient urban planning in arid regions. Full article