Search Results (133)

An efficient in vitro propagation protocol for Eulophia bicallosa was developed using asymbiotic seed germination and protocorm proliferation. The effect of light on seed germination and development was evaluated on Vacin and Went (VW) medium under five conditions: darkness, white, green, red, and blue light for 24 weeks. Blue and red light significantly accelerated seed development, allowing progression to stage 5 within 24 weeks. For protocorm proliferation, six semi-solid culture media were tested. Half-strength Murashige and Skoog (½MS) medium yielded the best results after 8 weeks, producing the highest numbers of shoots (1.0), leaves (1.1), and roots (4.2) per protocorm, with 100% survival. The effects of organic additives were also evaluated using coconut water and potato extract. A combination of 200 mL L⁻¹ coconut water and 50 g L⁻¹ potato extract enhanced shoot formation (1.7 shoots), while 150 mL L⁻¹ coconut water with 50 g L⁻¹ potato extract increased both leaf (1.9) and root (8.8) numbers. The effects of cytokinins (benzyladenine (BA), kinetin (6-furfurylaminopurine), and thidiazuron (TDZ)) and auxins (indole-3-acetic acid (IAA), α-naphthalene acetic acid (NAA), indole-3-butyric acid (IBA), and 2,4-dichlorophenoxyacetic acid (2,4-D)) were investigated using ½MS medium supplemented with each plant growth regulator individually at concentrations of 0, 0.1, 0.5, 1.0, and 2.0 mg L⁻¹. Among the cytokinins, 0.1 mg L⁻¹ BA produced the highest survival rate (96%), while 1.0 mg L⁻¹ BA induced the greatest shoot formation (93%, 2.3 shoots). Among the auxins, 0.1 mg L⁻¹ IAA resulted in the highest survival (96%), and 1.0 mg L⁻¹ IAA significantly enhanced root induction (4.2 roots per protocorm). Acclimatization in pots containing a 1:1:1 (v/v) mixture of pumice, sand, and soil resulted in 100% survival. This protocol provides a reliable and effective approach for the mass propagation and ex situ conservation of E. bicallosa. Full article

NaCl is the main cause of natural soil salinization. Exploring dark septate endophytes (DSEs) with NaCl tolerance provides information for ecological remediation in saline soil areas. In this study, six DSE strains (Didymella macrostoma (Dm), Paraboeremia selaginellae (Ps), Paraphoma pye (Pp), Paraphoma aquatica (Pa), Acrocalymma ampeli (Aa), and Exophiala xenobiotica (Ex)) isolated from the root sections of Anemone tomentosa were subjected to in vitro NaCl stress experiments and inoculation tests. The results showed that six DSE strains can grow on solid media with different NaCl concentrations (0, 0.2, 0.4, 0.6, 0.8, and 1.0 M) and increase the antioxidant enzyme activities and soluble protein contents to adapt to a salt stress environment. Among these strains, the Pp strain exhibited the greatest biomass accumulation under high NaCl concentrations (1.0 M), indicating greater NaCl tolerance compared to the other five strains. In addition, in the pot experiment, all six DSE strains were able to successfully establish a symbiotic relationship with A. tomentosa, and the Pp strain also showed significant growth-promoting effects on seedlings. In summary, the Pp strain is identified as having strong NaCl tolerance and a significant growth-promoting impact, indicating that it has potential applications as a NaCl-tolerant microbial agent and can be used for bioremediation in saline soils. This research contributes to the basic material and theoretical basis for joint plant–microbe combined remediation in areas prone to soil salinization. Full article

Foliar diseases caused by various fungi severely affect the yield and quality of banana crops. This study was conducted to clarify the biological characteristics of Bipolaris oryzae (teleomorph: Cochliobolus miyabeanus), a pathogen reported in 2023 as a new etiological agent of leaf spot in the banana variety ‘Pisang Mas’ (Musa acuminata, AA group) in Hainan Province, China, and to screen effective fungicides for its control. The results indicated that banana leaf extract agar (BLEA) and cornmeal agar (CMA) were the best media for the growth and sporulation of the pathogen, respectively. The pathogen grew best on a Czapek’s agar (CZA) medium with sucrose as a carbon source and yeast extract as a nitrogen source, while the optimal carbon and nitrogen sources for sporulation were lactose and beef extract, respectively. The pathogen could grow within a temperature range from 5 °C to 35 °C, and the optimal temperatures for growth and sporulation were 30 °C and 25 °C, respectively. Exposure to 50 °C for 10 min was lethal. Additionally, the pathogen could grow and sporulate within pH ranges of 4 to 10 and 4 to 9, respectively, and the optimal pH values for growth and sporulation were 5 and 8, respectively. The optimal photoperiods for growth and sporulation were 16 h light/8 h dark and 24 h light, respectively. Among the 12 tested fungicides, 500 g/L of iprodione SC showed the highest toxicity against B. oryzae, with an EC₅₀ value of 0.08 μg/mL, followed by 30% difenoconazole-azoxystrobin SC and 125 g/L of epoxiconazole SC, with EC₅₀ values of 0.13 μg·mL⁻¹ and 0.20 μg/mL, respectively. A fungicide containing 40% chlorothalonil SC had the poorest fungicidal activity, with an EC₅₀ value of 155.98 μg/mL. An artificial inoculation pot experiment showed that 125 g/L of epoxiconazole SC at 250 μg/mL, 500 g/L of iprodione SC at 1667 μg/mL, and 30% difenoconazole-azoxystrobin SC at 250 μg/mL provided a protective control efficacy of 100% against B. oryzae, while 125 g/L of epoxiconazole SC at 250 μg/mL and 500 g/L of iprodione SC at 1667 μg/mL provided a curative control efficacy of greater than 60%. This study clarified the optimal conditions for the mycelial growth and sporulation of B. oryzae isolated from banana and screened out fungicides with effective inhibitory activities. These results can provide guidance for field applications and the management of leaf spot caused by B. oryzae in banana. Full article

The low availability of phosphorus (P) in soil has become a critical factor limiting crop growth and agricultural productivity. This study aimed to isolate and evaluate a bacterial strain with high phosphate-solubilizing capacity to improve soil phosphorus utilization and promote crop growth. A phosphate-solubilizing bacterium, designated as YS-13, was isolated from farmland soil in Henan Province, China, and identified as Brevibacillus laterosporus based on morphological characteristics, physiological and biochemical traits, and 16S rDNA sequence analysis. Qualitative assessment using plate assays showed that strain YS-13 formed a prominent phosphate solubilization zone on organic and inorganic phosphorus media containing lecithin and calcium phosphate, with D/d ratios of 2.28 and 1.57, respectively. Quantitative evaluation using the molybdenum–antimony colorimetric method revealed soluble phosphorus concentrations of 21.24, 6.67, 11.73, and 17.05 mg·L⁻¹ when lecithin, ferric phosphate, calcium phosphate, and calcium phytate were used as phosphorus sources, respectively. The fermentation conditions for YS-13 were optimized through single-factor experiments combined with response surface methodology, using viable cell count as the response variable. The optimal conditions were determined as 34 °C, 8% inoculum volume, initial pH of 7.55, 48 h incubation, 5 g L⁻¹ NaCl, 8.96 g L⁻¹ glucose, and 8.86 g L⁻¹ peptone, under which the viable cell count reached 6.29 × 10⁸ CFU mL⁻¹, consistent with the predicted value (98.33%, p < 0.05). The plant growth-promoting effect of YS-13 was further validated through a pot experiment using Triticum aestivum cv. Jinchun 6. Growth parameters, including plant height, fresh biomass, root length, root surface area, root volume, and phosphorus content in roots and stems, were measured. The results demonstrated that YS-13 significantly enhanced wheat growth, with a positive correlation between bacterial concentration and growth indicators, although the growth-promoting effect plateaued at higher concentrations. This study successfully identified a high-efficiency phosphate-solubilizing strain, YS-13, and established optimal culture conditions and bioassay validation, laying a foundation for its potential application as a microbial inoculant and providing theoretical and technical support for reducing phosphorus fertilizer inputs and advancing sustainable agriculture. Full article

Under nursery conditions, various organic and inorganic growing media can be used for plant propagation. However, a common fertigation program may have varying effects on plant performance. This study evaluated alternative growing media under the same fertigation scheme in three indigenous Cypriot grapevine cultivars (Xynisteri, Maratheftiko, Giannoudi). Rooted cuttings were grown in pots containing soil, perlite, river sand, peat, and cocosoil. The plants were fertigated with a hydroponic nutrient solution with an electrical conductivity of 2.4 dS/m and a pH of 5.8. Xynisteri grown in peat and cocosoil accumulated minerals such as N and P while showing reduced levels of Na, total phenols, antioxidant capacity, and total flavonoids in the leaves. Additionally, plants exhibited low hydrogen peroxide and malondialdehyde (MDA) content, indicating a non-stressful growing environment. Maratheftiko cultivar accumulated N in perlite, K in cocosoil, and P in peat and cocosoil media. When grown in soil, Maratheftiko showed higher phenol content and increased antioxidant capacity, which is correlated with elevated oxidative stress (higher MDA). Giannoudi appeared to be more adapted to soil and/or cocosoil media, as evidenced by its lower MDA content, total phenols, total flavonoids, and antioxidant activity, compared to plants grown in perlite, sand, and peat. Chlorophyll and total carotenoid levels were increased in Giannoudi grown in soil. In conclusion, both growing media and fertigation practices should be tailored to optimize plant performance under nursery conditions. Full article

Grapevine trunk diseases (GTDs) are widespread worldwide, causing serious economic losses to the vitiviniculture industry. The etiology of the complex pathogenic mycobiome associated with this group of diseases is critical to implementing appropriate management strategies. Diseased grapevines exhibiting typical GTD symptoms were collected from vineyards in different provinces of Cyprus, resulting in 19 pycnidial isolates. A subsequent multilocus sequence analysis of six genetic loci (ITS, LSU, SSU, b-tub, tef1-a, and rpb2) identified them as Kalmusia variispora, and twelve representative isolates are included in the phylogenetic analyses. According to pathogenicity trials on two-year-old potted vines (cv. Mavro), all tested isolates were pathogenic, exhibiting light to dark brown discoloration and lesions of varying levels, ranging from 4 to 12.3 cm long. The capacity of K. variispora isolates to produce cell-wall-degrading exoenzymes was qualitatively estimated on solid media. Cellulase, pectinase, and laccase production were evident for all the tested isolates, except isolate CBS 151329, where the latter enzyme was undetected. The severity of the symptoms was consistent with the laccase-producing capacity. The present study confirmed the association of K. variispora with grapevines as a pathogen and represents the first description of this ascomycete as a GTD causal agent in Cyprus. This highly virulent species may play a significant role in the GTD complex, and its biological cycle and epidemiology should be further investigated. Full article

The polyol method under a single pot has successfully produced a coating of CuO, TiO₂, and the combination of CuO/TiO₂ around Ag NWs under sequential addition. The Ag NWs and their coating with a pure metal oxide and a hybrid of metal oxide were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM) coupled with EDX, X-ray photoelectron spectroscopy (XPS), UV–Visible, photoluminescent (PL) spectroscopy, and cyclic voltammetry (CV). The formation of ultra-thin NWs was also been seen in the presence of the TiO₂ coating. The ultra-thin and co-axial coating of each metal oxide and their hybrid form preserved the SPR of the Ag NWs and demonstrated photon harvesting from the 400–800 nm range. The band gap hybridization was confirmed by CV for the Ag@CuO/TiO₂ design, which made the structure a reliable catalyst. Therefore, the material expresses excellent photocatalytic activities for carcinogenic textile dyes such as turquoise blue (TB), sapphire blue (SB), and methyl orange (MO), with and without the reagent H₂O₂. The hybrid form (i.e., Ag@CuO/TiO₂) exhibited degradation within 6 min in the presence of H₂O₂. Additionally, the material showed antibacterial activities against various bacteria (Pseudomonas aeruginosa, Escherichia coli, Staphylococcus aureus, Bacillus subtilis, and Bacillus pumilus) when assayed using broth media. Therefore, the materials have established degrading and disinfection roles suitable for environmental perspectives. The role of coating with each metal oxide and their hybrid texture further improved the growth of Ag NWs. The preparatory route possibly ensued metal–metal oxide and metal–hybrid metal oxide Schottky junctions, which would expectedly transform it into a diode material for electronic applications. Full article

Alcohol dehydrogenases (ADHs) are versatile enzymes that enable the reversible reduction of aldehydes and ketones to their corresponding alcohols. The exceptional chemo-, regio-, and stereoselectivity of ADHs position them as attractive catalysts for generating enantiopure alcohols, whether through deracemization of racemates or asymmetric reduction of prochiral ketones. The emergence of robust ADHs capable of functioning effectively at elevated temperatures and in high concentrations of non-aqueous media has stimulated interest in integrating ADH-catalyzed asymmetric transformations with other chemical processes in a single pot, either in a stepwise mode or simultaneously. This review presents an overview of one-pot organic transformations that combine ADH-catalyzed asymmetric reductions with additional nonenzymatic chemical reactions, demonstrating the potential for enhanced efficiency and sustainability in synthetic organic chemistry. Full article

The controlled formation and stabilization of nanoparticles is of fundamental relevance for materials science and key to many modern technologies. Common synthetic strategies to arrest growth at small sizes and prevent undesired particle agglomeration often rely on the use of organic additives and require non-aqueous media and/or high temperatures, all of which appear critical with respect to production costs, safety, and sustainability. In the present work, we demonstrate a simple one-pot process in water under ambient conditions that can produce particles of various transition metal carbonates and sulfides with sizes of only a few nanometers embedded in a silica shell, similar to particles derived from more elaborate synthesis routes, like the sol–gel process. To this end, solutions of soluble salts of metal cations (e.g., chlorides) and the respective anions (e.g., sodium carbonate or sulfide) are mixed in the presence of different amounts of sodium silicate at elevated pH levels. Upon mixing, metal carbonate/sulfide particles nucleate, and their subsequent growth causes a sensible decrease of pH in the vicinity. Dissolved silicate species respond to this local acidification by condensation reactions, which eventually lead to the formation of amorphous silica layers that encapsulate the metal carbonate/sulfide cores and, thus, effectively inhibit any further growth. The as-obtained carbonate nanodots can readily be converted into the corresponding metal oxides by secondary thermal treatment, during which their nanometric size is maintained. Although the described method clearly requires optimization towards actual applications, the results of this study highlight the potential of bottom-up self-assembly for the synthesis of functional nanoparticles at mild conditions. Full article

Plant growth-promoting rhizobacteria (PGPR) induce changes in the plant metabolism, improving plant growth under drought stress conditions by employing different mechanisms of interaction. In this study, two bacterial strains (Enterobacter sp. LHB11 and Bacillus sp. PIXIE) were evaluated in vitro regarding their PGPR traits, including the ACC-Deaminase enzyme activity. Both PGPR strains produced indole acetic acid (40.65–75.81 µg⁻¹mL⁻¹), exopolysaccharides (39.23–40.20 µg eq CR mL⁻¹), proline (61.5–106.1 mM), and volatile organic compounds. Furthermore, both solubilized phosphate (1.15–1.53 ratio, halo/colony) and fixed the atmospheric nitrogen. Only LHB11 showed ACC-Deaminase activity. Furthermore, both strains tolerated osmotic stress induced in liquid media with up to 20% of Polyethylene glycol-6000. In a drought stress pot experiment, both strains were applied to tomato roots, exposed to normal irrigation (100%) and drought stress (decreasing irrigation by 50%). The inoculation of both strains improved the plant growth parameters under stress conditions significantly, e.g., the root dry weight (+41.0–43.4%), while the proline content decreased to a level similar to the unstressed control. In addition, strain inoculation increased the total phenolic content and the antioxidant capacity measured as the inhibitions of the ABTS radical and as the reduction in ferric ions and increased the catalase and ascorbate peroxidase enzyme activity. The bacterial contribution to the changes in biochemical parameters is higher than in morphological parameters. At the same time, the strains modulate specific parameters depending on the stress condition, e.g., ABTS, catalase activity, and proline content. In conclusion, both strains Induced Systemic Tolerance (IST), regardless of their capacity to use the ACC-Deaminase mechanism, by modulating several mechanisms of plant response to drought stress. Our results showcase the relevance of considering the orchestration of several plant response mechanisms in order to fully assess the potential and efficiency of the plant–PGPR interaction under drought stress. Full article

The objective of this study was to analyze the response of antioxidant parameters in soybean plants inoculated with newly isolated Bradyrhizobium japonicum and Bacillus subtilis strains as single and co-inoculants under drought stress. Bacterial strains were selected according to osmotic stress tolerance (in the presence of 36% PEG 6000) in appropriate liquid media. The effect of soybean inoculation was examined in a soil pot experiment in water deficit conditions (0 and 7 days withholding water). The influence of water stress and inoculation was evaluated in soybean leaves, roots, and nodules through guaiacol peroxidase (POX), ionically cell-wall-bound peroxidase (POD) activity, and ABTS˙⁺ radical cation scavenging capacity, as well as parameters of N-fixation efficiency. The results showed a significant influence of inoculation on constitutive and drought-induced antioxidant and N-fixation parameters. Inoculation increased the activity of POX (up to 116, 169, and 245%), POD (up to 116, 102, and 159%), and antioxidant capacity (up to 74, 76, and 81%) in soybean leaves, roots, and nodules under water deficit, respectively. Application of bacterial strains resulted in higher shoot, root, and nodule weight and nitrogen content both in non-stressed and drought stress conditions. Overall, co-inoculation had better effects on the investigated soybean parameters compared to single inoculation. Selection and application of bacterial strains with improved tolerance to drought stress is necessary in developing inoculants that would result in enhanced crop production under unfavorable environmental conditions. Full article

Biochar has been promoted mostly as a soil supplement that improves plant growth/yield and to a lesser extent as a growing medium component. The alarmed situation for peat substitution in growing medium renders biochar as a promising substitute for current research. In this study, biochar derived by wood-based materials was evaluated at different ratios (0, 5, 10, 15, and 20% v/v) for peat partial substitution for Antirrhinum majus pot production. Biochar had increased potassium content and pH, which affected the growing media properties (total pores space and water filled capacity) and decreased nitrogen and phosphorus content in the media. Adding ≥15% biochar increased plant height and decreased flowering, but no effect was observed on plant biomass produced. The presence of biochar increased the total phenols and flavanols content and antioxidant capacity, with greater effects at the higher biochar rates used. This resulted in lipid peroxidation and an increase in hydrogen peroxide content, causing oxidative stress. Potassium and magnesium accumulated more but nitrogen and phosphorus were accumulated less in snapdragon leaves. Biochar at 10% can be considered as a successful candidate to partially substitute peat, and efforts to improve growing media characteristics are required for A. majus pot production. Full article

This paper reports an efficient in vitro rooting and acclimatization method for Pennisetum ‘Vertigo^®’. For that purpose, the influence of the IAA (indole-3-acetic acid) in MS (Murashige and Skoog) media, and different types of LED light (100% blue, 100% red, a combination of red and blue (70% + 30%), a combination of red, blue with yellow, green, or far-red (35% + 15% + 50%), and white LED) were investigated. A fluorescent lamp and a medium without auxin were used as controls. Subsequently, the plants were transferred ex vitro in trays to the greenhouse and later transplanted into pots. In all tested combinations, the shoots rooted at a high rate of 70–100% (except under blue light). The best results were obtained under white LED or the fluorescent lamp, where the highest number of roots was formed; however, IAA did not increase the rooting rate, the number, or the weight of roots. Shoots rooted under LEDs and on media containing IAA generally exhibited higher soluble sugar content compared to those rooted on auxin-free media. Consistent with the rooting results, the best acclimatization was observed in plants rooted under white LED or fluorescent light on auxin-free media. Full article

A metal-free and Selectfluor-mediated selective oxidation reaction of benzo[d]isothiazol-3(2H)-ones in aqueous media is presented. This novel strategy provides a facile, green, and efficient approach to access important benzo[d]isothiazol-3(2H)-one-1-oxides with excellent yields and high tolerance to various functional groups. Furthermore, the purification of benzoisothiazol-3-one-1-oxides does not rely on column chromatography. Moreover, the preparation of saccharine derivatives has been achieved through sequential, double oxidation reactions in a one-pot aqueous media. Full article

The damask rose (Rosa damascena Mill.) is an ornamental–medicinal plant from the Rosaceae family, and its aromatic compounds and essential oils are applied globally in the food, cosmetic, and pharmaceutical industries. Due to its economic value, this research aimed to establish a protocol for an efficient, rapid, and cost-effective method for in vitro shoot multiplication and rooting of the R. damascena ‘Kashan’ and ‘Hervy Azerbaijan’ genotypes. Nodal segments (as primary explants) were cultured on the Murashige and Skoog (MS) medium with combinations of various plant growth regulators (PGRs) such as gibberellic acid (GA₃), 6-benzylaminopurine (BAP), and indole-3-butyric acid (IBA), as well as a PGR-like substance, phloroglucinol (PG), vitamins such as ascorbic acid (AA), and activated carbon in the form of active charcoal (AC). For the establishment stage, 0.1 mg·L⁻¹ PG, 0.2 mg·L⁻¹ GA₃, and 1 mg·L⁻¹ BAP were added to the media. Secondary explants (nodal segments containing axillary buds produced from primary explants) were obtained after 30 days of in vitro culture and transferred to the proliferation media supplemented with different concentrations of BAP (0, 0.5, 1, 1.5, 2, and 2.5 mg·L⁻¹) and GA₃ (0, 0.1, 0.2, 0.4, 0.8, and 1 mg·L⁻¹) together with 0.1 mg·L⁻¹ PG and 20 mg·L⁻¹ of AA. The rooting media were augmented with different concentrations of BAP and GA₃ with 0.1 mg·L⁻¹ of IBA, PG and 20 mg·L⁻¹ of AA and AC. The results showed that the highest regeneration coefficient (4.29 and 4.28) and the largest number of leaves (23.33–24.33) were obtained in the explants grown on the medium supplemented with 2 mg·L⁻¹ BAP and 0.4 mg·L⁻¹ GA₃ for the ‘Kashan’ and ‘Hervy Azerbaijan’ genotypes, respectively. Likewise, this PGR combination provided the shortest time until bud break (approximately 6.5 days) and root emergence (approximately 10 days) in both genotypes. The highest number of shoots (4.78 per explant) and roots (3.96) was achieved in this medium in the ‘Kashan’ rose. Stem and root lengths, as well as stem and root fresh and dry weights, were also analyzed. In most measured traits, the lowest values were found in the PGRs-free control medium. Rooted plantlets were transferred to pots filled with perlite and peat moss in a 2:1 proportion and were acclimatized to ambient greenhouse conditions with a mean 90.12% survival rate. This research contributes significantly to our understanding of Damask rose propagation and has practical implications for the cosmetic and ornamental plant industries. By offering insights into the manipulation of regeneration processes, our study opens up new possibilities for the effective production of high-quality plant material. Full article