Search Results (18)

Background: Thoracolumbar (TL) fractures are uncommon injuries in the pediatric population. Surgery is recommended for TL fractures with significant deformity, posterior ligamentous complex disruption, or neurological compromise. The Thoracolumbar Injury Classification and Severity Scale (TLICS) has been validated in pediatric populations and serves as a valuable tool for guiding treatment decisions. However, there remains a lack of clarity regarding the appropriate treatment for patients with a TLICS of 4. While conservative and surgical techniques have been described, most studies focused on adult populations, and there is no consensus on the appropriate management in the pediatric population. We reviewed our institutional experience of TL fractures in young children with TLICS of 4, managed both non-operatively and operatively. Methods: A retrospective review of a single institution’s experience managing pediatric patients (<18 years old) with TL fractures receiving a TLICS of 4 from 2015 to 2023 was conducted to determine the clinical outcomes following non-operative and operative treatment. Results: Among 11 pediatric patients, 4 were managed with bracing alone, primarily for posterior column fractures, using a thoracolumbar sacral orthosis (TLSO). Four patients underwent minimally invasive screw fixation (MISF), for Chance or posterior column fractures, with an average operative time of 143 min, blood loss of 29 cc, length of stay (LOS) of 9.8 days, and a follow-up interval of 6 months. Three patients received open posterior screw fixation (OPSF), most commonly for Chance fractures, with averages of 129 min operative time, 225 cc blood loss, 9.7 days LOS, and 4 months follow-up. Both MISF and OPSF utilized intra-operative imaging, with lower radiation exposure in the MISF group. One MISF patients had hardware failure evident by screw lucency on follow-up imaging. Conclusions: Bracing and surgery are safe management options for pediatric TL fractures receiving a TLICS of 4. MISF is an effective alternative treatment strategy, comparable to OPSF, with the advantage of reduced blood loss and radiation exposure. Further studies with age-matched cohorts and long-term outcomes may help determine the optimal management course. Full article

Background and Objectives: Cerclage cable fixation with 2 mm multiple-braided cables for displaced acetabular fractures has shown good midterm functional and radiographic outcomes. We retrospectively evaluated the clinical and radiographic outcomes of cerclage cable fixations over ten years. Materials and Methods: We extracted data for patients who underwent cerclage cable fixation for acetabular fractures at a single institution from 2007 to 2012. We adopted this procedure for acetabulum fractures with posterior column fractures. Postoperative reduction quality, complications, reoperations, and Japanese Orthopedic Association (JOA) hip objective functional scores were analyzed. Postoperative reduction quality was classified using plain radiography and computed tomography. Results: We evaluated nine patients with a mean follow-up period of 14.1 ± 2.6 years (range: 10.8–18.1 years). The mean age was 47.1 ± 15.5 years old (range: 28–74 years); the mean injury severity score was 13.6 ± 4.7 (range: 9–22). The most frequent type of fracture was a both-column fracture. Anatomical reduction quality was achieved in five cases. Four patients had hip osteoarthritis at the last follow-up; among them, one patient had worsening hip arthritis > 5 years after surgery, and one patient developed osteoarthritis > 10 years after surgery. Their postoperative reduction quality was worse than their anatomical reduction quality, and both engaged in physical labor. None of the patients underwent revision total hip arthroplasty. The mean JOA hip score was 90.9 ± 7.9 (range: 74–100); seven patients scored >90 at the last follow-up. Conclusions: Cerclage cable fixation showed satisfactory postoperative reductions and favorable long-term clinical outcomes. Long-term follow-up might be necessary for patients whose postoperative reduction is not anatomical to detect late occurrence of hip osteoarthritis, even if osteoarthritis is not evident during short-term follow-up periods. Full article

Background: Functional recovery following the surgical fixation of acetabular posterior wall fractures remains a challenge. This study compares outcomes of posterior wall fracture reconstruction using an anatomical posterior acetabular plate (APAP) versus conventional reconstruction plates. Methods: Forty patients with acetabular fractures involving the posterior wall or column underwent surgery, with 20 treated using APAPs (APAP group) and 20 with conventional pelvic reconstruction plates (control group). Baseline patient characteristics, intraoperative blood loss and time, reduction quality, postoperative function, and postoperative complications were compared using appropriate non-parametric statistical tests. A general linear model for repeated measures analysis of variance was employed to analyze trends in functional recovery. Results: No significant differences were observed in baseline characteristics. APAP significantly reduced surgical time by 40 min (186.5 ± 51.0 versus 225.0 ± 47.7, p =0.004) and blood loss (695 ± 393 versus 930 ± 609, p = 0.049) compared to conventional plates. At 3 and 6 months following surgery, the APAP group exhibited higher functional scores (modified Merle d’Aubigné scores 10 ± 1.8 versus 7.8 ± 1.4, p < 0.001; 13.4 ± 2.8 versus 10.1 ± 2.1, p = 0.001), converging with the control group by 12 months (modified Merle d’Aubigné scores 14.2 ± 2.6 versus 12.7 ± 2.6, p = 0.072; OHS 31.6 ± 12.3 versus 30.3 ± 10.1, p = 0.398). Radiologically, the APAP group demonstrated superior outcomes (p = 0.047). Complication and conversion rates to hip arthroplasty did not significantly differ between groups (10% versus 15%, p = 0.633). Conclusions: The use of an APAP in reconstructing the posterior acetabulum significantly reduces surgical time, decreases intraoperative blood loss, and leads to earlier functional recovery compared to conventional reconstruction plates. The APAP provides stable fixation of the posterior wall and ensures the durable maintenance of reduction, ultimately yielding favorable surgical outcomes. Full article

Background/Objectives: Acetabular fractures, traditionally linked to high-impact trauma in younger adults, are increasingly observed in the elderly due to falls and poor bone quality. This demographic shift necessitates updated treatment approaches. This study analyzes demographic trends and treatment evolution over a decade using the German pelvic fracture registry. Methods: Data on acetabular fractures were analyzed from the German pelvic fracture registry of the German Trauma Society. Parameters included classification, demographics, treatment methods, and surgical details. Trends were assessed by grouping patients based on treatment intervals and age, comparing treatment methods, surgical approaches, and reduction quality across these groups, considering fracture types and treatment volume. Results: The study included 2853 unilateral acetabular fractures with a mean patient age of 61.5 years, showing an increasing age trend. A shift from simple to complex fractures involving the anterior acetabular column was observed. Operative treatment was performed in 62.5% of cases, more common in non-geriatric patients and those with posterior column involvement. The use of anterior intrapelvic approaches increased over time, replacing the Ilioinguinal extrapelvic approach. Anatomical reduction was achieved in 47.4% of cases, with 31.7% having imperfect reductions and 20.9% poor reductions. High-volume centers had significantly better reduction outcomes, particularly for simple fractures. Geriatric patients exhibited worse reduction quality compared to younger patients. In-hospital mortality was stable at 3.3%. Conclusions: The study highlights a demographic shift towards an older patient population, leading to more complex fracture patterns. Despite advancements in surgical techniques and new implant technologies, these demographic changes have resulted in lower reduction quality for complex fractures. Emphasis is placed on careful patient selection for reconstructive surgery or endoprosthetic replacement to ensure high-quality outcomes. Full article

Background: The incidence of acetabular fractures in geriatric patients has increased. Although there are strong data supporting the early operative treatment of hip fractures in geriatric patients, the optimal timing for acetabular fractures remains unclear and for several reasons, delayed treatment after trauma is common. Methods: A retrospective analysis of the German Pelvis Registry between 2008 and 2017 was performed. Ultimately, 665 patients with fractures of the anterior column or anterior column and posterior hemitransverse were enrolled. Patients above and below 65 years of age with these fracture types were analyzed regarding surgery day (within 48 hours, between 2 and 4 days, after 4 days), complication rate, reduction quality, and hospital stay. Results: The complication rate of the geriatric group was twice as high as that of younger patients; however, this finding was independent of the timing of surgery. Reduction quality and hospital stay were independent of surgical timing. Conclusions: In contrast to other fracture types, such as proximal femur fractures, the timing of surgery for acetabular fractures does not have a significant impact on the patient’s outcome. The optimal time for surgery cannot be determined using the current data. However, as expected, there is a significantly higher risk for postoperative complications in the geriatric population. Full article

The purpose of this case report is to describe the case of a patient with ankylosing spinal hyperostosis (ASH) and lumbar spine fracture complicated by ureteral injury mimicking spondylodiscitis with osteomyelitis features and retroperitoneal abscess formation followed by the cervical spine fracture. A consecutive analysis and summary of the medical history, radiological documentation, operative procedure, complications, and outcomes were performed. A 59-year-old man presented with abdominal pain three weeks after sustaining a low-energy fall. The performed CT scans demonstrated a three-column fracture at the L3/L4 level and features of ASH. Additionally, MRI scans demonstrated hyperintense fluid collection within L3/L4 intervertebral space communicating with both psoas major muscles, mimicking spondylodiscitis with osteomyelitis features and retroperitoneal abscess formation. An in situ instrumented lumbar fusion at the L2-L3-L5-S1 levels with implantation vertebral body replacement implant at the L3/L4 level was performed. Postoperative CT imaging revealed evidence of post-traumatic right ureteral injury. Following urological treatment covering nephrectomy and ureter ligation, the patient was maintained at a 2-year follow-up. After this period, the patient presented again with tetraparesis after sustaining a low-energy fall. The performed CT scans demonstrated a three-column fracture at the C5/C6 level. The combined anterior and posterior osteosynthesis at the C4-C5-C6-C7 levels was performed. This case report presents the rare clinical constellation regarding the lumbar spine fracture complicated by ureteral injury followed by a cervical spine fracture regarding the same patient. The potential injury of retroperitoneal structures, including the ureter after hyperextensive lumbar spine fracture, should be considered in ASH patients. In this case, one should be aware of the atypical clinical presentation regarding the observed spondylodiscitis- and osteomyelitis-like features. Full article

The treatment of complex acetabular fractures remains a complicated clinical challenge. Our self-designed novel anatomical locking guide plate (NALGP) has previously shown promising potential in T-shaped acetabular fractures (TAF), but a direct comparison with conventional fixations is yet to be made. The TAF model was established based on a volunteer’s computer tomography data and then fixed with double column locking plates (DLP), a posterior column locking plate with anterior column screws (LPACS), and our NALGP. Forces of 200 N, 400 N, and 600 N were then loaded on the model vertically downward, respectively. The stress distribution and peaks and maximum displacements at three sites were assessed. We found that the stress area of all three plates was mainly concentrated around the fracture line, while only the matching screws of the NALGP showed no obvious stress concentration points. In addition, the NALGP and DLP showed significantly less fracture fragment displacement than the LPACS at the three main fracture sites. The NALGP was found to have less displacement than DLP at the posterior column and ischiopubic branch sites, especially under the higher loading forces of 400 N and 600 N. The fixation stability of the NALGP for TAF was similar to that of DLP but better than that of LPACS. Moreover, the NALGP and its matching screws have a more reasonable stress distribution under different loads of force and the same strength as the LPACS. Full article

Background and Objectives: Minimally invasive surgeries for acetabulum fracture fixation are gaining popularity due to their known advantages versus open reduction and internal fixation. Antegrade or retrograde screw fixation along the long axis of the posterior column of the acetabulum is increasingly applied in surgical practice. While there is sufficient justification in the literature for the application of the anterior approach, there is a deficit of reports related to the posterior approach. The aim of this study was to evaluate the biomechanical competence of posterior column acetabulum fracture fixation through antegrade screw placement using either a standard cannulated screw or a cannulated compression headless screw (CCHS) via posterior approach. Materials and Methods: Eight composite pelvises were used, and a posterior column acetabulum fracture according to the Letournel Classification was simulated on both their left and right sides via an osteotomy. The sixteen hemi-pelvic specimens were assigned to two groups (n = 8) for either posterior column standard screw (group PCSS) or posterior column CCHS (group PCCH) fixation. Biomechanical testing was performed by applying steadily increased cyclic load until failure. Interfragmentary movements were investigated by means of motion tracking. Results: Initial stiffness demonstrated significantly higher values in PCCH (163.1 ± 14.9 N/mm) versus PCSS (133.1 ± 27.5 N/mm), p = 0.024. Similarly, cycles and load at failure were significantly higher in PCCH (7176.7 ± 2057.0 and 917.7 ± 205.7 N) versus PCSS (3661.8 ± 1664.5 and 566.2 ± 166.5 N), p = 0.002. Conclusion: From a biomechanical perspective, CCHS fixation demonstrates superior stability and could be a valuable alternative option to the standard cannulated screw fixation of posterior column acetabulum fractures, thus increasing the confidence in postoperative full weight bearing for both the patient and treating surgeon. Whether uneventful immediate postoperative full weight bearing can be achieved with CCHS fixation should primarily be investigated in further human cadaveric studies with a larger sample size. Full article

Displacement of the anterior and posterior column complicates decision making for both-column acetabular fractures. We questioned whether pelvic surgeons agree on treatment strategy, and whether the use of virtual 3D reconstructions changes the treatment strategy of choice. A nationwide cross-sectional survey was performed in all pelvic trauma centers in the Netherlands. Twenty surgeons assessed 15 both-column fractures in 2D as well as 3D. Based on conventional imaging, surgical treatment was recommended in 89% of cases, and by adding 3D reconstructions this was 93% (p = 0.09). Surgical approach was recommended as anterior (65%), posterior (8%) or combined (27%) (poor level of agreement, κ = 0.05) based on conventional imaging. The approach changed in 37% (p = 0.006), with most changes between a combined and anterior approach (still poor level of agreement, κ = 0.13) by adding 3D reconstructions. Additionally, surgeons’ level of confidence increased from good in 38% to good in 50% of cases. In conclusion, surgeons do not agree on the treatment strategy for both-column acetabular fractures. Additional information given by 3D reconstructions may change the chosen surgical approach and increase surgeons’ confidence about their treatment decision. Therefore, virtual 3D reconstructions are helpful for assessing both-column fracture patterns and aid in the choice of treatment strategy. Full article

Staged treatment for pilon fractures is widely accepted. It remains to be discussed how to reduce and fix posterior column fractures while avoiding clinical complications. We provided a staged treatment protocol with detailed surgical techniques for closed AO Foundation/Orthopaedic Trauma Association (AO/OTA) C3 tibial pilon fractures with fibular fractures. In the first stage, the internal fixation of the fibula and distal tibial posterior column is accompanied by an external fixator. After swelling, the medial and anterior columns were fixed via the posteromedial approach in the second stage. We advocate early reduction and fixation of the posterior column and lateral column. The right timing of surgery can ensure well-reduced articular surface and alignment while minimizing soft tissue complications. Full article

Background and Objectives: Using 3D printed models in orthopaedics and traumatology contributes to a better understanding of injury patterns regarding surgical approaches, reduction techniques, and fracture fixation methods. The aim of this study is to evaluate the effectiveness of a novel technique implementing 3D printed models to facilitate the optimal preoperative planning of the surgical treatment of complex acetabular fractures. Materials and Methods: Patients with complex acetabular fractures were assigned to two groups: (1) conventional group (n = 12) and (2) 3D printed group (n = 10). Both groups included participants with either a posterior column plus posterior wall fracture, a transverse plus posterior wall fracture, or a both-column acetabular fracture. Datasets from CT scanning were segmented and converted to STL format, with separated bones and fragments for 3D printing in different colors. Comparison between the two groups was performed in terms of quality of fracture reduction (good: equal to, or less than 2 mm displacement, and fair: larger than 2 mm displacement), functional assessment, operative time, blood loss, and number of intraoperative x-rays. Results: A significant decrease in operative time, blood loss, and number of intraoperative x-rays was registered in the 3D printed group versus the conventional one (p < 0.01), with 80% of the patients in the former having good fracture reduction and 20% having fair reduction. In contrast, 50% of the patients in the conventional group had good reduction and 50% had fair reduction. The functional score at 18-month follow-up was better for patients in the 3D printed group. Conclusions: The 3D printing technique can be considered a highly efficient and patient-specific approach for management of complex acetabular fractures, helping to restore patient′s individual anatomy after surgery. Full article

The management strategies of thoracolumbar (TL) burst fractures include posterior, anterior, and combined approaches. However, the rigid constructs pose a risk of proximal junctional failure. In this study, we aim to systemically evaluate the biomechanical performance of different TL reconstruction constructs using finite element analysis. Furthermore, we investigate the motion and the stress on the proximal junctional level adjacent to the constructs. We used a T10-L3 finite element model and simulated L1 burst fracture. Reconstruction with posterior instrumentation (PI) alone (U2L2 and U1L1+(intermediate screw) and three-column spinal reconstruction (TCSR) constructs (U1L1+PMMA and U1L1+Cage) were compared. Long-segment PI resulted in greater global motion reduction compared to constructs with short-segment PI. TCSR constructs provided better stabilization in L1 compared to PI alone. Decreased intradiscal and intravertebral pressure in the proximal level were observed in U1L1+IS, U1L1+PMMA, and U1L1+Cage compared to U2L2. The stress and strain energy of the pedicle screws decreased when anterior reconstruction was performed in addition to PI. We showed that TCSR with anterior reconstruction and SSPI provided sufficient immobilization while offering additional advantages in the preservation of physiological motion, the decreased burden on the proximal junctional level, and lower risk of implant failure. Full article

Background and Objectives: Atraumatic intrapelvic protrusion of the acetabular component following excessive reaming of the acetabulum with a far medial positioning of the cup is a rare, but serious complication of a total hip arthroplasty (THA). This study analyzes the factors contributing to this uncommon complication and presents the outcome after the revision surgery using the Ganz reinforcement ring combined with a bone graft and plating of the posterior column and/or screws for the anterior column. Materials and Methods: A retrospective case series study with seven patients (four males, mean age 76 ± 10 years (60–86)) that underwent a revision THA within 24 ± 17 days (5–60) after an atraumatic periprosthetic acetabular fracture with a medial cup protrusion was performed. All fractures were reconstructed with a Ganz reinforcement ring and bone graft with a mean follow-up of 1.7 ± 1.7 years (0.5–5). Radiographs were evaluated for the following: (i) cup positioning immediately after the primary THA and the revision surgery, (ii) cup migration in the follow-up, and (iii) fracture healing. Results: The position of the acetabular component as assessed on the postoperative radiographs after the index surgery and before the complete medial cup protrusion showed a cup placement beyond the ilioischial line indicative of a fracture of the medial wall. The revision surgery with the reconstruction of the medial wall with a Ganz reinforcement ring combined with a bone graft restored in the presented cases the center of rotation in the horizontal direction with a statistical significance (p < 0.05). During the follow-up, there was no aseptic loosening with the relevant cup migration or significant change in the position of the acetabular cup at the final follow-up (p > 0.05) after the revision. All seven fractures and bone grafts realized a bone union until the latest follow-up. Conclusions: Following excessive reaming, the acetabular component was placed too far medially and resulted in an intrapelvic cup protrusion. An unstable cup following a fracture of the medial wall was evident on the immediate postoperative radiographs. In the case of the medial wall perforation with an intrapelvic cup protrusion after the primary THA, the reconstruction with a Ganz reinforcement ring was a successful treatment option resulting in the fracture healing and a stable cup positioning. Surgeons should be aware of that rare and probably underreported complication and restore the anatomic center of rotation by treating the defect intraoperatively. Full article

Background and Objectives: Unstable thoracolumbar burst fractures require surgical management as they can result in neurological deficits if left untreated. This study aimed to evaluate whether a new bone scan scoring system could accurately assess instability in thoracolumbar burst fractures. Materials and Methods: Fifty-two patients with thoracolumbar burst fractures who underwent bone scans and magnetic resonance imaging prior to surgery between January 2015 and August 2017 at Ulsan University Hospital were selected for inclusion. Instability was determined by clinical assessment and imaging, and the Thoracolumbar Injury Classification and Severity score was determined. Bone scans were visually evaluated using a new bone scan scoring system. Bone scan findings of vertebral body (B_B) and posterior column (B_P) were scored separately and were summed to produce B_TS {B_TS (total score) = B_B (body score, 5 points) + B_P (posterior score, 2 points)}. The diagnostic performance of the scoring system for identifying unstable then thoracolumbar burst fractures were assessed. Results: Of the 52 thoracolumbar burst fractures, 34 (65.4%) were unstable and 31 (59.6%) had a Thoracolumbar Injury Classification and Severity score ≥ 5. The diagnostic performance of using B_TS ≥ 4 to identify unstable thoracolumbar burst fractures and those with a Thoracolumbar Injury Classification and Severity score ≥ 5 was as follows: sensitivity, 61.8% and 58.1%; specificity, 94.4% and 81.0%; positive predictive value, 95.5% and 81.8%; and negative predictive value, 56.7% and 56.7%, respectively. Conclusions: The proposed bone scan scoring system has a high specificity and positive predictive value for identifying thoracolumbar burst fractures that are unstable or have a Thoracolumbar Injury Classification and Severity score ≥ 5. This scoring system may help to inform decisions regarding surgical management. Full article

Although they represent a significant chapter of traumatic pathology with a deep medical and social impact, thoracolumbar fractures have proven to be elusive in terms of a definitive classification. The ever-changing concept of the stability of a thoracolumbar injury (from Holdsworth’s two-column concept to Denis’ three-column theory), the meaningful integration of neurological deficit, and a reliable clinical usability have made reaching a universally accepted and reproductible classification almost impossible. The advent of sophisticated imaging techniques and an improved understanding of spine biomechanics led to the development of several classification systems. Each successive system has contributed significantly to the understanding of physiopathological mechanisms and better treatment management. Magerl et al. developed a comprehensive classification system based on progressive morphological damage determined by the following three fundamental forces: compression, distraction, and axial torque. Vaccaro et al. devised the thoracolumbar injury severity score based on the following three independent variables: the morphology of the injury, posterior ligamentous complex (PLC) integrity, and neurological status at the time of injury. However, there are limitations to the classification system, especially when magnetic resonance imaging yields an uncertain status of PLC. The authors review the various classification systems insisting on their practical relevance and caveats and illustrate the advantages and disadvantages of the most widely used systems with relevant cases from their practice. Full article