Search Results (43)

Conjugated microporous polymers (CMP) are advanced photocatalytic systems for degrading organic dyes. However, their potential and efficiency are often limited by rapid electron–hole pair (e⁻/h⁺) recombination. To overcome this limitation, this study proposes a strategy that involves designing a Mott–Schottky heterojunction and integrating graphene sheets with a near-zero bandgap into the CMP-1 framework, resulting in a non-covalent graphene/CMP (GCMP) heterojunction composite. GCMP serves two main functions: physical adsorption and photocatalytic absorption that uses visible light energy to trigger and degrade the organic dye. GCMP effectively degraded four dyes with both anionic and cationic properties (Rhodamine B; Nile Blue; Congo Red; and Orange II), demonstrating stable recyclability without losing its effectiveness. When exposed to visible light, GCMP generates reactive oxygen species (ROS), primarily singlet oxygen (¹O₂), and superoxide radicals (^•O₂), degrading the dye molecules. These findings highlight GCMP’s potential for real-world applications, offering a metal-free, cost-effective, and environmentally friendly solution for wastewater treatment. Full article

This study presents a bioinspired phase-change transparent flexible heater (PTFH) for programmable droplet manipulation under ultralow voltage. By embedding a self-junctioned copper nanowire network into paraffin-infused, porous PVDF-HFP gel matrices, the PTFH achieves rapid, non-contact, and reversible control of microdroplet mobility. The PTFH can be bent or tailored into diverse shapes (e.g., V/X configurations), enabling multidirectional droplet transport. Under ultralow voltage actuation (<1 V), the surface of PTFH melts the phase-change lubricant within 2 s, switching surface wettability from high adhesion (Wenzel state) to low adhesion (SLIPS state). By combining Laplace pressure and temperature gradients (up to 22 °C/mm), drive droplets at ~2.0 mm/s over distances of ~13.9 mm. Programmable droplet coalescence, curved-surface transport, and a microreactor design for batch reactions were also demonstrated. The PTFH exhibits excellent transparency (89% when activated), mechanical flexibility, and cyclic stability, offering a versatile platform for microreactors, microengines, and smart windows. Full article

In this study, a thin film of silicon carbide (SiC) was deposited on a porous silicon (P-Si) substrate using pulsed laser deposition (PLD). The photo–electrochemical etching method with an Nd: YAG laser at 1064 nm wavelength and 900 mJ pulse energy and at a vacuum of 10⁻² mbar P-Si was utilized to create a sufficiently high amount of surface area for SiC film deposition to achieve efficient SiC film growth on the P-Si substrate. X-ray diffraction (XRD) analysis was performed on the crystalline structure of SiC and showed high-intensity peaks at the (111) and (220) planes, indicating that the substrate–film interaction is substantial. Surface roughness particle topography was examined via atomic force microscopy (AFM), and a mean diameter equal to 72.83 nm was found. Field emission scanning electron microscopy (FESEM) was used to analyze surface morphology, and the pictures show spherical nanoparticles and a mud-sponge-like shape demonstrating significant nanoscale features. Photoluminescence and UV-Vis spectroscopy were utilized to investigate the optical properties, and two emission peaks were observed for the SiC and P-Si substrates, at 590 nm and 780 nm. The SiC/P-Si heterojunction photodetector exhibited rectification behavior in its dark I–V characteristics, indicating high junction quality. The spectral responsivity of the SiC/P-Si observed a peak responsivity of 0.0096 A/W at 365 nm with detectivity of 24.5 A/W Jones, and external quantum efficiency reached 340%. The response time indicates a rise time of 0.48 s and a fall time of 0.26 s. Repeatability was assured by the tight clustering of the data points, indicating the good reproducibility and stability of the SiC/P-Si deposition process. Linearity at low light levels verifies efficient photocarrier generation and separation, whereas a reverse saturation current at high intensities points to the maximum carrier generation capability of the device. Moreover, Raman spectroscopy and energy dispersive spectroscopy (EDS) analysis confirmed the structural quality and elemental composition of the SiC/P-Si film, further attesting to the uniformity and quality of the material produced. This hybrid material’s improved optoelectronic properties, achieved by combining the stability of SiC with the quantum confinement effects of P-Si, make it useful in advanced optoelectronic applications such as UV-Vis photodetectors. Full article

Background/Objectives: The barrier properties of the human small intestine play a crucial role in regulating digestion, nutrient absorption and drug metabolism. Current in vitro organotypic models consist only of an epithelium, which does not take into account the possible role of stromal cells such as fibroblasts or the extracellular matrix (ECM) which could contribute to epithelial barrier properties. Therefore, the aim of this study was to determine whether these stromal cells or ECM were beneficial or detrimental to barrier function when incorporated into an organotypic human small intestine model. Methods: Intestinal epithelial cell lines or primary cell organoids derived from the epithelial stem cells of the small intestine were cultivated either on a porous Transwell membrane (epithelial model) or on a primary small intestinal stromal cell-populated collagen-fibrin hydrogel (full thickness model). Results: Both models expressed villin (enterocytes), lysozyme (Paneth cells), Ki67 (proliferative cells) and zonula occludens-1 (tight junctions). The polarized epithelial barriers of the full thickness models demonstrated a significant decrease in transepithelial electrical resistance (TEER) with values comparable to that found in the native small intestine in contrast to the higher TEER values observed in the epithelial models. This correlated to an increase in secreted zonulin, a regulator of intestine permeability, in the full thickness models. The decreased TEER values were due to both the stromal cells and the choice of the hydrogel versus the Transwell membrane. Moreover, erythropoietin and epithelial growth factor secretion, which have roles in regulating barrier integrity, directly correlated with the changes in TEER and permeability. Conclusions: This study emphasizes the importance of different cell types being incorporated into small intestine models and, also, the influence of the scaffold or matrix used. Full article

The placenta plays a critical role in nutrient and oxygen exchange during pregnancy, yet the effects of medicinal drugs on this selective barrier remain poorly understood. To overcome this, this study presents a cost-effective bioimpedance spectroscopy (BIS) system to assess tight junction integrity and monolayer formation in BeWo b30 cells, a widely used model of the multinucleated maternal–fetal exchange surface of the placental barrier. Cells were cultured on collagen-coated porous membranes and treated with forskolin to induce controlled syncytialization. Electrical impedance was measured using an entry level impedance analyzer, while immunofluorescence staining was used to confirm monolayer formation and syncytialization. The measurements and staining confirmed the formation of a confluent monolayer on day 4. In fact, the electrical resistance tripled for treated samples indicating a more electrically restrictive barrier. This resistance remained constant for treated samples reflecting the intact barrier’s integrity over the next 3 days. The measurements show that, on day 4, the electrical capacitance of the cells decreased for the treated samples as opposed to the untreated samples. This reflects that the surface area of the BeWo b30 cells decreased when the samples were treated with forskolin. Finally, a COMSOL model was developed to explore the effects of electrode positioning, depth, and distance on TEER measurements, explaining discrepancies in the literature. In fact, there was a substantial 97% and 39.4% difference in the obtained TEER values. This study demonstrates the AD2 device’s feasibility for monitoring placental barrier integrity and emphasizes the need for standardized setups for comparable results. The system can hence be used to analyze drug effects and nutrient transfer across the placental barrier. Full article

In recent years, the morphology control of semiconductor nanomaterials has been attracting increasing attention toward maximizing their functional properties and reaching their end use in real-world devices. However, the development of easy and cost-effective methods for preparing large-scale patterned semiconductor structures on flexible temperature-sensitive substrates remains ever in demand. In this study, vapor post-treatment (VPT) is investigated as a potential, simple and low-cost post-preparative method to morphologically modify gravure-printed zinc oxide (ZnO) nanoparticulate thin films at low temperatures. Exposing nanoparticles (NPs) to acidic vapor solution, spontaneous restructuring pathways are observed as a consequence of NPs tending to reduce their high interfacial energy. Depending on the imposed environmental conditions during the treatment (e.g., temperature, vapor composition), various ZnO thin-film morphologies are produced, from dense to porous ones, as a result of the activation and interplay of different spontaneous interface elimination mechanisms, including dissolution–precipitation, grain boundary migration and grain rotation–coalescence. The influence of VPT on structural/optical properties has been examined via XRD, UV–visible and photoluminescence measurements. Controlling NP junctions and network nanoporosity, VPT appears as promising cost-effective, low-temperature and pressureless post-preparative platform for preparing supported ZnO NP-based films with improved connectivity and mechanical stability, favoring their practical use and integration in flexible devices. Full article

A novel hierarchical porous biomorphic ZnO/SnO was facilely synthesized in one step using bagasse as a bio-template. The structural features of the ZnO/SnO₂ n–n heterostructures were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). The results revealed that the as-prepared ZnO/SnO₂ retained the original pore morphology of the bagasse material, and the ZnO/SnO₂ was demonstrated with higher sensing performance as compared with the pure SnO₂. Particularly, when the molar ratio of SnO₂:ZnO = 1:1, the sensor displayed the highest response, showing an excellent response value of 37 under 100 ppm methanol at 340 °C. Meanwhile, the ZnO/SnO₂ composite exhibited good gas selectivity and stability to methanol, which could mainly be attributed to the formation of n-n junctions between SnO₂ and ZnO and the high capability of absorbed oxygen species of the ZnO/SnO₂ composite. Full article

Today, hydrogel dressings that can protect injury sites and effectively promote healing have become highly desirable in wound management. Therefore, multifunctional silver-poli(N-isopropylacrylamide/itaconic acid) (Ag-P(NiPAAm/IA)) hydrogel nanocomposites were developed for potential application as topical treatment dressings. The radiolytic method, used for the crosslinking of the polymer matrix as well as for the in situ incorporation of silver nanoparticles (AgNPs) into the polymer matrix, enables the preparation of hydrogel nanocomposites without introducing harmful and toxic agents. Moreover, materials produced using γ-irradiation are simultaneously sterilized, thus fulfilling one of the basic requirements regarding their potential biomedical applications. The NiPAAm/IA ratio and the presence of AgNPs influenced the microstructural parameters of the investigated systems. Increasing the IA content leads to the formation of a more porous polymer matrix with larger pores, while the incorporated AgNPs act as additional junction points, decreasing the porosity and pore size of the resulting nanocomposite hydrogels. Swelling studies showed that most investigated systems uptake the fluids from their surroundings by non-Fick diffusion. Further, the Ag⁺ ion release, antibacterial activity, and cytotoxicity of Ag-P(NiPAAm/IA) hydrogel nanocomposites were examined to evaluate their biomedical potential. All hydrogel nanocomposites showed an initial burst release of Ag⁺ ions (useful in preventing bacteria adherence and biofilm formation), followed by a slower release of the same (ensuring sterility for longer use). An antibacterial activity test against Escherichia coli and Staphylococcus aureus showed that Ag-P(NiPAAm/IA) hydrogel nanocomposites, with silver concentrations around 10 ± 1 ppm, successfully prevent bacterial growth. Finally, it was shown that the investigated hydrogel nanocomposites do not exhibit a cytotoxic effect on human keratinocyte HaCaT cells. Therefore, these multifunctional hydrogel nanocomposites may promote wound repair and show promising potential for application as functional wound dressing. Full article

Buckypaper (BP), a flexible and porous material, exhibits photovoltaic properties when exposed to light. In this study, we employed radio frequency (RF) sputtering of zinc oxide (ZnO) followed by rapid thermal annealing to enhance the photovoltaic response of BP. We investigated the impact of various sputtering parameters, such as the gas flow ratio of argon to oxygen and deposition time, on the morphology, composition, resistivity, and photovoltaic characteristics of ZnO-modified BP. Additionally, the photovoltaic performance of the samples under different illumination modes and wavelengths was compared. It was found that optimal sputtering conditions—argon to oxygen flow ratio of 1:2, deposition time of 20 min, and power of 100 watts—resulted in a ZnO film thickness of approximately 45 nanometers. After annealing at 400 °C for 10 min, the ZnO-modified BP demonstrated a significant increase in photocurrent and photovoltage, along with a reduction in resistivity, compared to unmodified BP. Moreover, under gradient illumination, the ZnO-modified BP exhibited a photovoltage enhancement of 14.70-fold and a photocurrent increase of 13.86-fold, compared to uniform illumination. Under blue light, it showed a higher photovoltaic response than under other colors. The enhancement in photovoltaic response is attributed to the formation of a Schottky junction between ZnO and BP, an increased carrier concentration gradient, and an expanded light absorption spectrum. Our results validate that ZnO sputtering followed by annealing is an effective method for modifying BP for photovoltaic applications such as solar cells and photodetectors. Full article

In current-generation designs of total primary hip joint replacement, the prostheses are fabricated from alloys. The modulus of elasticity of the alloy is substantially higher than that of the surrounding bone. This discrepancy plays a role in a phenomenon known as stress shielding, in which the bone bears a reduced proportion of the applied load. Stress shielding has been implicated in aseptic loosening of the implant which, in turn, results in reduction in the in vivo life of the implant. Rigid implants shield surrounding bone from mechanical loading, and the reduction in skeletal stress necessary to maintain bone mass and density results in accelerated bone loss, the forerunner to implant loosening. Femoral stems of various geometries and surface modifications, materials and material distributions, and porous structures have been investigated to achieve mechanical properties of stems closer to those of bone to mitigate stress shielding. For improved load transfer from implant to femur, the proposed study investigated a strategic debulking effort to impart controlled flexibility while retaining sufficient strength and endurance properties. Using an iterative design process, debulked configurations based on an internal skeletal truss framework were evaluated using finite element analysis. The implant models analyzed were solid; hollow, with a proximal hollowed stem; FB-2A, with thin, curved trusses extending from the central spine; and FB-3B and FB-3C, with thick, flat trusses extending from the central spine in a balanced-truss and a hemi-truss configuration, respectively. As outlined in the International Organization for Standardization (ISO) 7206 standards, implants were offset in natural femur for evaluation of load distribution or potted in testing cylinders for fatigue testing. The commonality across all debulked designs was the minimization of proximal stress shielding compared to conventional solid implants. Stem topography can influence performance, and the truss implants with or without the calcar collar were evaluated. Load sharing was equally effective irrespective of the collar; however, the collar was critical to reducing the stresses in the implant. Whether bonded directly to bone or cemented in the femur, the truss stem was effective at limiting stress shielding. However, a localized increase in maximum principal stress at the proximal lateral junction could adversely affect cement integrity. The controlled accommodation of deformation of the implant wall contributes to the load sharing capability of the truss implant, and for a superior biomechanical performance, the collared stem should be implanted in interference fit. Considering the results of all implant designs, the truss implant model FB-3C was the best model. Full article

The development of novel nanomaterials as highly efficient gas-sensing materials is envisaged as one of the most important routes in the field of gas-sensing research. However, developing stable, selective, and efficient materials for these purposes is a highly challenging task requiring numerous design attempts. In this work, a ZrO₂/Co₃O₄ composite is reported, for the first time, as a gas-sensing material for the detection of ethanol. The sensitive and selective detection of ethanol gas at 200 °C has been demonstrated for the ZrO₂/Co₃O₄ (0.20 wt%/0.20 wt%)-based sensor. Furthermore, the sensor showed a very low response/recovery time of 56 s and 363 s, respectively, in response to a pulse of 20 ppm of ethanol and good stability. The interesting gas-sensing property of ZrO₂/Co₃O₄ can be ascribed to both the porous structure, which facilitates the interaction between the target gas and the sensing site, and the p–p-junction-induced built-in electric field. These results indicate that the ZrO₂/Co₃O₄ composite can serve as a heterostructured nanomaterial for the detection of ethanol gas. Full article

High-performance ultraviolet photodetectors have important scientific research significance and practical application value, which has been the focus of researchers. In this work, we have constructed a highly photosensitive UV photodetector with a unique “sandwich” structure, which was mainly composed of two layers of ZnO nanosheet arrays and one layer of polyaniline (PANI). The results showed that the UV current of ZnO/PANI devices was 100 times higher than that of pure ZnO devices under the same UV irradiation time. At a 365 nm wavelength, the device had excellent photocurrent responsiveness and photoconductivity. This high performance was attributed to the large specific surface area of ZnO nanosheets and the p-n junction formed between P-type PANI nano-porous film and N-type ZnO nanosheets. This provides a solid theoretical basis for the application of ZnO nanosheets in ultraviolet detection, and possesses significance for the development of ultraviolet photodetectors. Full article

The electrocatalyst of oxygen reduction reactions is one of the basic components of a fuel cell. In addition to costly Pt/C benchmark catalysts, cost-effective carbon-based catalysts have received the most attention. Enormous efforts have been dedicated to trade off the catalyst performance against the economic benefit. Optimizing composition and/or structure is a universal strategy for improving performance, but it is typically limited by tedious synthesis steps. Herein, we have found that directly introducing CNT into MOF-derived carbonaceous nanopolyhedra, i.e., introduced carbon nanotubes (CNTs) penetrated porous nitrogen-doped carbon polyhedra (NCP) dotted with cobalt nanoparticles (denoted as CNTs-Co@NCP), can optimize the catalytic activity, stability, and methanol tolerance. The hierarchical architecture combines the 0D/1D/3D Co/CNT/NCP interfaces and 1D/3D CNT/NCP junctions with the frameworks with a greatly exposed active surface, strengthened mass transport kinetics, stereoscopic electrical conductivity networks and structural robustness. The sterical self-consistency of MOF-self-assembly triggered by introduced CNTs demonstrates tactful ORR electrocatalytic activity regulation. Eventually, the CNTs-Co@NCP showed a half-wave potential (E_1/2) of 0.86 V and a diffusion-limited current density (J_L) of 5.94 mA/cm² in alkaline electrolyte. The CNTs-Co@NCP was integrated into the cathode of a direct methanol fuel cell (DMFC) with an anion-exchange membrane, and an open-circuit voltage (OCV) of 0.93 V and a high power density of 46.6 mW cm⁻² were achieved. This work successfully developed a catalyst with competitive ORR performance through plain parameter fine-tuning without complex material design. Full article

To improve the gas sensitivity of reduced oxide graphene (rGO)-based NO₂ room-temperature sensors, different contents (0–3 wt%) of rGO, ZnO rods, and noble metal nanoparticles (Au or Ag NPs) were synthesized to construct ternary hybrids that combine the advantages of each component. The prepared ZnO rods had a diameter of around 200 nm and a length of about 2 μm. Au or Ag NPs with diameters of 20–30 nm were loaded on the ZnO-rod/rGO hybrid. It was found that rGO simply connects the monodispersed ZnO rods and does not change the morphology of ZnO rods. In addition, the rod-like ZnO prevents rGO stacking and makes nanocomposite-based ZnO/rGO achieve a porous structure, which facilitates the diffusion of gas molecules. The sensors’ gas-sensing properties for NO₂ were evaluated. The results reveal that Ag@ZnO rods-2% rGO and Au@ZnO rods-2% rGO perform better in low concentrations of NO₂ gas, with greater response and shorter recovery time at the ambient temperature. The response and recovery times with 15 ppm NO₂ were 132 s, 139 s and 108 s, 120 s, and the sensitivity values were 2.26 and 2.87, respectively. The synergistic impact of ZnO and Au (Ag) doping was proposed to explain the improved gas sensing. The p-n junction formed on the ZnO and rGO interface and the catalytic effects of Au (Ag) NPs are the main reasons for the enhanced sensitivity of Au (Ag)@ZnO rods-2% rGO. Full article

Cartilage defects can be difficult to treat; therefore, tissue engineering of cartilage is emerging as a promising potential therapy. One interesting area of research explores the delivery of cells to the cartilage defect via scaffold-based cell delivery vehicles and microsurgery. This study explores the use of novel poly(glycerol sebacate) methacrylate (PGSm)-polymerised high internal phase emulsion (polyHIPE) microspheres as scaffolds with embedded cells for cartilage tissue engineering. Porous microsphere scaffolds (100 µm–1 mm diameter) were produced from emulsions consisting of water and a methacrylate-based photocurable resin of poly(glycerol sebacate). These resins were used in conjunction with a T-junction fluidic device and an ultraviolet (UV) curing lamp to produce porous microspheres with a tuneable size. This technique produced biodegradable PGSm microspheres with similar mechanical properties to cartilage. We further explore these microspheres as scaffolds for three-dimensional culture of chondrocytes. The microspheres proved to be very efficient scaffolds for primary chondrocyte culture and were covered by a dense extracellular matrix (ECM) network during the culture period, creating a tissue disk. The presence of glycosaminoglycans (GAGs) and collagen-II was confirmed, highlighting the utility of the PGSm microspheres as a delivery vehicle for chondrocytes. A number of imaging techniques were utilised to analyse the tissue disk and develop methodologies to characterise the resultant tissue. This study highlights the utility of porous PGSm microspheres for cartilage tissue engineering. Full article