Search Results (234)

The acoustic, thermal, and mechanical performances of sawdust-reinforced polyurethane (PU) foam are investigated for different thicknesses and varying mesh sizes. Acoustic properties are explored using a combination of impedance tube testing and mathematical modeling with the Johnson–Champoux–Allard–Lafarge (JCAL) model, a simplified JCAL model and a model of non-uniform cylindrical pores with a log-normal radius distribution (NUPSD). Thermal Insulation and mechanical properties are determined by measuring the effective thermal conductivity (K_eff) and by tensile strength tests, respectively. Compared with pure PU foam, the presence of sawdust matches noise reduction coefficients (NRC) and increases sound absorption averages (SAA) by nearly 10%. Increasing thickness and width of backing air gap have the usual effects of improving low- and mid-frequency absorption and shifting resonance peaks toward lower frequencies. As well as superior acoustic performance, samples with Mesh 16 sawdust reinforcement provide both useful insulation (K_eff = 0.044 W/mK) and tensile strength (~0.06 MPa), confirming their multifunctionality. Although the JCAL model provides reasonable fits to the sound absorption data, some of the fitted parameter values are unphysical. Predictions of the NUPSD model are relatively poor but improve with sample thickness and after fiber addition. Full article

The increasing demand for sustainable construction materials has driven interest in utilizing waste biomass within polymer composites. Rigid polyurethane foams, widely valued for thermal insulation, exhibit a significant flammability issue. This study investigates the impact of incorporating various waste biomass materials, including brewers’ spent grain, coffee grounds, and soybean husk and their combustion ashes on the selected properties of rigid polyurethane foams. The primary objective is to assess the potential of these eco-friendly additives as replacements for traditional raw materials, aiming to enhance fire resistance and thermal stability and thereby promoting circular economy principles in the construction sector. Composite foam samples were fabricated using a mixing and casting technique, incorporating 5% wt. of fillers into the polymer matrix. Thermal stability and flammability were evaluated using cone calorimetry and thermogravimetric analysis. The findings indicated that while biomass inclusion did not significantly improve char formation, the addition of ash substantially increased char yield, a critical factor in fire suppression. Although biomass and ash may influence flammability, they do not inherently bolster the intrinsic thermal stability of the polyurethane matrix itself. Full article

The influence of both mixing pressure and substrate temperature on the structure and properties of spray polyurethane foams produced with a high content (80%) of tall oil-based polyol was investigated. The use of a renewable feedstock such as tall oil polyol aligns with the principles of sustainable development by reducing the carbon footprint and minimizing the environmental impact of the production process. The research focused on identifying the relationships between process parameters and the resulting materials’ thermal insulation properties, physico-mechanical performance, thermal behavior, cellular structure, and chemical composition. The results demonstrated that increasing the mixing pressure (from 12.5 to 17.5 MPa) and substrate temperature (from 40 to 55 °C) led to a reduction in average pore diameter, an increase in closed-cell content up to 94.5% and improved structural homogeneity. The thermal conductivity coefficient (λ) ranged from 18.55 to 22.30 mW·m⁻¹·K⁻¹ while apparent density varied between 44.0 and 45.5 kg·m⁻³. Higher mixing pressure positively affected compressive strength, whereas elevated substrate temperature reduced this parameter. Brittleness, water uptake, and dimensional stability remained at favorable levels and showed no significant correlation with processing conditions. These findings confirm the high quality of the materials and highlight their potential as sustainable, environmentally friendly insulation foams. Full article

Sandwich panels, widely used in factory and warehouse construction, are highly susceptible to fire due to their fragile surfaces and polyurethane-insulated cores. Such structures facilitate rapid fire spread, significantly increasing the risk of extensive thermal damage. Although conventional measures, such as surface pre-wetting, are commonly utilized, their effectiveness is limited due to rapid evaporation. To address this issue, the current study evaluates the effectiveness of compressed air foam (CAF) applied as a pre-application treatment for delaying fire spread. Full-scale fire experiments were conducted to measure temperature variations across sandwich panel surfaces treated under three different conditions: untreated, water-treated, and CAF-treated. Experimental results indicated that CAF effectively formed a stable insulating barrier, maintaining temperatures well below critical thresholds, compared to untreated and water-treated panels. CAF application demonstrated superior thermal protection, reducing internal temperatures by up to 78% compared to untreated conditions and by 67.5% compared to water-treated conditions. These findings underscore the practical importance of adopting CAF pre-application as a proactive fire mitigation strategy, significantly enhancing fire safety standards in industrial and storage facilities constructed with sandwich panels. Full article

This study investigates the feasibility of incorporating chemically recycled polyol (glycolysate), derived from semi-rigid polyurethane waste from the building industry, into rigid PUF formulations intended for thermal insulation applications. Glycolysis was performed using a diethylene glycol–glycerol mixture (4:1) at 185 °C in the presence of a dibutyltin dilaurate (DBTDL) catalyst. The resulting glycolysate was characterized by a hydroxyl number of 590 mg KOH/g. Foams containing 5–50% recycled polyol were prepared and described in terms of foaming kinetics, cellular structure, thermal conductivity, apparent density, mechanical performance, dimensional stability, flammability, and volatile organic compound (VOC) emissions. The incorporation of glycolysate accelerated the foaming process, with the gel time reduced from 44 s to 16 s in the sample containing 40% recycled polyol, enabling a reduction in catalyst content. The substitution of up to 40% virgin polyol with recycled polyol maintained a high closed-cell content (up to 87.7%), low thermal conductivity (λ₁₀ = 26.3 mW/(m·K)), and dimensional stability below 1%. Additionally, compressive strength improvements of up to 30% were observed compared to the reference foam (294 kPa versus 208 kPa for the reference sample). Flammability testing confirmed compliance with the B2 classification (DIN 4102), while preliminary qualitative VOC screening indicated no formation of additional harmful volatile compounds in glycolysate-containing samples compared to the reference. The results demonstrate that glycolysate can be effectively utilized in high-performance insulation materials, contributing to improved resource efficiency and a reduced carbon footprint. Full article

The optimization of thermal performance in buildings is essential for sustainable urban development, yet the high cost and complexity of traditional thermal conductivity measurement methods limit broader research and educational applications. This study developed and validated a low-cost, replicable prototype that determines the thermal conductivity of roof tiles and composites using the Lee Disc method automated with Arduino-based acquisition. Standardized samples of ceramic, fiber–cement, galvanized steel, and steel coated with a castor oil-based polyurethane composite reinforced with miriti fiber (Mauritia flexuosa) were analyzed. The experimental setup incorporated integrated digital thermocouples and strict thermal insulation procedures to ensure measurement precision and reproducibility. Results showed that applying the biocompatible composite layer to metal tiles reduced thermal conductivity by up to 53%, reaching values as low as 0.2004 W·m⁻¹·K⁻¹—well below those of ceramic (0.4290 W·m⁻¹·K⁻¹) and fiber–cement (0.3095 W·m⁻¹·K⁻¹) tiles. The system demonstrated high accuracy (coefficient of variation < 5%) and operational stability across all replicates. These findings confirm the feasibility of open-source, low-cost instrumentation for advanced thermal characterization of building materials. The approach expands access to experimental research, promotes sustainable insulation technologies, and offers practical applications for both scientific studies and engineering education in resource-limited environments. Full article

As an emerging thermal insulation material, silica aerogel holds broad application prospects in building energy conservation. Silica aerogel based waterborne coatings are low thermal conductivity, readily applicable and environmentally friendly, offering significant advantages for improving building energy efficiency. However, the inadequate dispersibility and agglomeration tendency of silica aerogel in aqueous polymer systems adversely affect coating properties. To address this challenge, a waterborne polyurethane (WPU) coating incorporating 3-aminopropyltriethoxysilane-modified organo-bridged silica aerogel (APTES-OBSA) was developed. Integration of organic segments within organo-bridged silica aerogel (OBSA) framework enhanced compatibility of silica aerogel with organic polyurethane chains, thereby reducing aerogel agglomeration. 3-aminopropyltriethoxysilane (APTES) surface modification of OBSA introduced amino groups that strengthened interfacial interaction between OBSA-WPU, effectively enhancing aerogel dispersion within the aqueous polyurethane matrix. APTES-OBSA loading achieved 20 wt% in WPU composite coatings. Compared to neat WPU coating, the composite coatings achieved 21.6% reduction in thermal conductivity, 10 °C lower temperature under thermal irradiation, and 26.6% higher adhesion. Additionally, the composite coatings demonstrated enhanced thermal stability and good water resistance. The excellent comprehensive performance positions this material as a promising eco-friendly thermal insulation coating for building energy-saving applications. Full article

The increasing demand for sustainable construction materials has driven research into the reuse of plastic waste for renewable building applications. This study introduces a new lightweight insulating mortar for floor and roof systems, utilizing recycled rigid polyurethane (PU) foam as the primary aggregate. The binder mainly consists of Portland cement, with no added sand, and includes minor additives to enhance mechanical, physical, and thermal properties. Initial tests demonstrated that key performance metrics—density, compressive strength, and thermal conductivity—are significantly influenced by the PU content. As the proportion of PU increased, all three parameters decreased. The optimized formulation, comprising 92.25 vol.% PU foam, 6.75 vol.% cement, and 1 vol.% additives, achieved a low bulk density of 420 kg/m³, a compressive strength of 1 MPa, and a thermal conductivity of 0.07 W/m·K. A pilot-scale production system with a capacity of 1500 L/h (equivalent to 20 bags of 75 L) was subsequently designed, implemented, and validated. These findings underscore the potential of PU-based lightweight insulating mortars to reduce environmental impact and support the development of sustainable construction practices globally. Full article

The growing demand for sustainable and energy-efficient construction has driven significant interest in the development of advanced insulation materials that reduce energy usage while minimizing environmental impact. Although conventional insulation materials such as polyurethane, polystyrene, and mineral wools offer excellent thermal and acoustic performance, they are derived from non-renewable sources, have high embodied carbon (EC) (up to 7.3 kg CO₂-eq/kg), and pose end-of-life disposal challenges. Thus, this review critically examines the emergence of insulation materials derived from natural and recycled sources, which align with circular economy principles by minimizing waste, promoting material reuse, and extending product life cycles. Sustainable alternatives such as sheep wool, hemp, flax, and jute not only exhibit competitive thermal conductivity (as low as 0.031–0.046 W/m·K) and very good sound absorption but also offer low EC, biodegradability, and regional availability. Despite some limitations, including variable fire resistance and thickness requirements, these bio-based insulators present a viable path toward greener building solutions. The review highlights that waste-based insulation materials are essential for sustainable construction due to their low EC, renewability, and contribution to waste reduction, making them a necessary alternative even when conventional materials demonstrate superior short-term performance. Full article

This systematic literature review explores recent advancements in polymer-based composite materials designed for thermal insulation in automotive applications, with a particular focus on sustainability, performance optimization, and scalability. The methodology follows PRISMA 2020 guidelines and includes a comprehensive bibliometric and thematic analysis of 229 peer-reviewed articles published over the past 15 years across major databases (Scopus, Web of Science, ScienceDirect, MDPI). The findings are structured around four central research questions addressing (1) the functional role of insulation in automotive systems; (2) criteria for selecting suitable polymer systems; (3) optimization strategies involving nanostructuring, self-healing, and additive manufacturing; and (4) future research directions involving smart polymers, bioinspired architectures, and AI-driven design. Results show that epoxy resins, polyurethane, silicones, and polymeric foams offer distinct advantages depending on the specific application, yet each presents trade-offs between thermal resistance, recyclability, processing complexity, and ecological impact. Comparative evaluation tables and bibliometric mapping (VOSviewer) reveal an emerging research trend toward hybrid systems that combine bio-based matrices with functional nanofillers. The study concludes that no single material system is universally optimal, but rather that tailored solutions integrating performance, sustainability, and cost-effectiveness are essential for next-generation automotive thermal insulation. Full article

This study evaluates the performance degradation of spray rigid polyurethane foam (RPUF) insulation on reservoir dam structures under multi-physics coupling conditions. Focusing on characteristic environmental exposures in Hot Summer and Cold Winter (HSCW) climate zones, accelerated aging tests simulating coupled temperature–humidity effects were conducted to comparatively analyze the thermal resistance and durability evolution between unprotected and encapsulated RPUF configurations. Scanning electron microscopy (SEM), infrared spectroscopy (IR), and other methods were used to characterize and analyze the structure of RPUF. Research has shown that in HSCW climate zones, the thermal conductivity of RPUF gradually increases with the number of degradation cycles, and the insulation performance decreases, mainly due to the damage of the pore structure caused by temperature aging and the combined effect of moisture absorption aging. In comparison, the RPUF after protection can effectively slow down the rate and degree of decline of its insulation performance. On this basis, a time-varying prediction model for the thermal conductivity of RPUF under long-term service in HSCW climate environments was fitted, providing a scientific basis for the durability evaluation of reservoir dam insulation. Full article

Biopolyols derived from solid fats of both vegetable origin (coconut oil (P/CO) and palm oil (P/PA)) and animal origin (pork fat (P/PO) and duck fat (P/DU)) were used to produce thermal insulation polyurethane foams. The biopolyols were characterized by hydroxyl numbers in the range of 341–396 mgKOH/g, a viscosity of 60–88 mPa·s, and a functionality of 2.3–3.4. Open-cell polyurethane foams were obtained by replacing from 50 to 100 wt.% of a petrochemical polyol with the biopolyols from solid fats. The most advantageous properties were found for the materials modified with the biopolyol based on pork fat, which was attributed to its high degree of cell openness. At a low apparent density, the foam materials were characterized by good dimensional stability. The use of solid fats offers new possibilities for modifying thermal insulation polyurethane foams. Full article

This study explores how production technology influences spray-applied rigid polyurethane (PUR) foam insulation’s cryogenic performance. In cryogenic applications such as liquid gas storage, insulation must minimise heat transfer and resist moisture ingress under severe thermal gradients. Experimental aluminium vessels were insulated with PUR foam of varying thicknesses and surface conditions—rough, machined smooth, and with a urea-based protective coating—and then tested using dynamic boil-off of liquid nitrogen (LN₂). Foam properties, including adhesion, mechanical strength, thermal expansion, thermal conductivity, and closed-cell content, were evaluated. The results revealed that thicker insulation reduced both effective thermal conductivity and moisture uptake. Although the urea-coated vessel showed minimal water absorption, the coating increased overall thermal conductivity due to its heat conduction and condensation behaviour. Moisture was primarily absorbed near the foam surface, and no cumulative effects were observed during repeated tests. The effective thermal conductivity was determined by interpolating boil-off data, confirming that insulation performance strongly depends on thickness, surface condition, and environmental humidity. These findings provide valuable guidance for the design and application of PUR foam insulation in cryogenic environments. Full article

To enhance the performance of polyurethane foams, fillers are often incorporated into the matrix. However, the interaction between the filler and the polyurethane matrix is crucial for achieving the desired property improvements. Therefore, surface modification of the fillers plays a vital role in optimizing this interaction. The current study aims to activate the surface of expanded vermiculite and perlite with dextrin to incorporate additional functional groups on the surface of the fillers via the ball-milling process, thereby improving the reaction with a polymer matrix. Applied surface activation with dextrin resulted in the formation of dextrin-Si-O-Si-dextrin linkages in the fillers, allowing for a maximum improvement of 11% and 9% in water absorption, as well as slightly positive changes in the water contact angle of polyurethane foam with dextrin-activated perlite and vermiculite, respectively, compared to non-activated fillers. It also resulted in noticeable differences in the foaming times and viscosity of the premixes, affecting the structure of rigid polyurethane foam composites. Compared to non-activated perlite and vermiculite filler polyurethane foam composites, the dynamic viscosity of polyurethane foam composites with dextrin-activated perlite and vermiculite reduced maximally 16 and 21 times, respectively. At the same time, the closed cell content increased, resulting in lower thermal conductivity values up to a 7.5 wt.% filler concentration. In addition, a rise in mechanical performance was also achieved. Compressive strength increased by a maximum of 61% and 71%, while tensile strength increased by a maximum of 36% and 20% for polyurethane foam composites with dextrin-activated perlite and vermiculite, respectively. Full article

This study proposes a sustainable multi-criteria optimization framework for the energy retrofit of collective residential buildings in Algeria, particularly those constructed between the 1970s and 1980s. Through on-site surveys, energy consumption analysis, and seasonal temperature measurements, the high energy demand of these buildings was confirmed. Using EnergyPlus simulations based on Meteoblue weather data, 16 retrofit strategies were assessed—incorporating various insulating materials applied internally or externally (via rendering or cladding). The ELECTRE III decision-making tool was employed, supported by the Simos Revised Framework (SRF) for weighting environmental, economic, and social criteria. Results demonstrate that all strategies significantly reduce energy demand—by up to 72.5%, with reductions reaching 94.4% in winter and 43.5% in summer, depending on insulation type and placement. Improvements in indoor thermal comfort were also observed, with exterior insulation beneath cladding offering the best performance during winter, while exterior rendering also proved effective in the summer. The ELECTRE III analysis identified rock wool and polyurethane with fiber cement cladding as optimal insulation solutions. The proposed approach supports national energy policies and aligns with the Sustainable Development Goals (SDGs), offering a replicable model for large-scale building retrofits in similar climatic and architectural contexts. Full article