Search Results (18)

This study developed a water-soluble antifouling coating to protect ship hulls against corrosion and fouling without the usage of a primer. The coating retains its adhesion to the steel substrate and reduces corrosion rates compared to those for uncoated specimens. The coating’s protective properties rely on the interaction of conductive polyaniline (PAni) nanorods, magnetite (Fe₃O₄) nanoparticles, and graphene oxide (GO) sheets modified with titanium dioxide (TiO₂) nanoparticles. The PAni/Fe₃O₄ nanocomposite improves the antifouling layer’s out-of-plane conductivity, whereas GO increases its in-plane conductivity. The anisotropy in the conductivity distribution reduces the electrostatic attraction and limits primary bacterial and pathogen adsorption. TiO₂ augments the conductivity of the PAni nanorods, enabling visible light to generate H₂O₂. The latter decomposes into H₂O and O₂, rendering the coating environmentally benign. The coating acts as an effective barrier with limited permeability to the steel surface, demonstrating outstanding durability for naval steel over extended periods. Full article

Electrochromic devices (ECDs) capable of modulating both visible color and infrared (IR) emissivity are promising for applications in smart thermal camouflage and multifunctional displays. However, conventional transmissive ECDs suffer from limited IR modulation due to the low IR transmittance of transparent electrodes. Here, we report a reflection-type electrochromic zinc-ion battery (HWEC-ZIB) using a self-doped polyaniline nanorod film (SP(ANI-MA)) as the active layer. By positioning the active material at the device surface, this structure avoids interference from transparent electrodes and enables broadband and efficient IR emissivity tuning. To prevent electrolyte-induced IR absorption, a thermal lamination encapsulation method is employed. The optimized device achieves emissivity modulation ranges of 0.28 (3–5 μm) and 0.19 (8–14 μm), delivering excellent thermal camouflage performance. It also exhibits a visible color change from earthy yellow to deep green, suitable for various natural environments. In addition, the HWEC-ZIB shows a high areal capacity of 72.15 mAh cm⁻² at 0.1 mA cm⁻² and maintains 80% capacity after 5000 cycles, demonstrating outstanding electrochemical stability. This work offers a versatile device platform integrating IR stealth, visual camouflage, and energy storage, providing a promising solution for next-generation adaptive camouflage and defense-oriented electronics. Full article

Wearable sensors have rapidly advanced, enabling applications such as human activity monitoring, electronic skin, and biomimetic robotics. To meet the growing demands of these applications, multifunctional sensing has become essential for wearable devices. However, most existing studies predominantly focus on enhancing single-function sensing capabilities. This study introduces a multifunctional sensor that combines high stretchability for strain and pressure detection with ultraviolet (UV) sensing capability. To achieve simultaneous detection of strain, pressure, and UV light, a multi-sensing approach was employed: a capacitive method for strain and pressure detections and a resistive method utilizing a pn-heterojunction diode for UV detection. In the capacitive method, polyaniline (PANI) served as parallel-plate electrodes, while silicon-based elastomer acted as the dielectric layer. This configuration enabled up to 100% elongation and enhanced operational stability through encapsulation. The sensor demonstrated a strong linear relationship between capacitance value changes reasonably based on the area of PANI, and showed a good linearity with an R-squared value of 0.9918. It also detected pressure across a wide range, from low (0.4 kPa) to high (9.4 kPa). Furthermore, for wearable applications, the sensor reliably captured capacitance variations during finger bending at different angles. For UV detection, a pn-heterojunction diode composed of p-type silicon and n-type zinc oxide nanorods exhibited a rapid response time of 6.1 s and an on/off ratio of 13.8 at −10 V. Durability under 100% tensile strain was confirmed through Von Mises stress calculations using finite element modeling. Overall, this multifunctional sensor offers significant potential for a variety of applications, including human motion detection, wearable technology, and robotics. Full article

Manganese dioxide is an ideal anode for sodium-ion batteries due to its rich crystal shapes. However, its low conductivity, low reversible discharge capacity, slow diffusion kinetics, and poor cyclic stability limit its potential for industrial application. The design of manganese dioxide (MnO₂) with various morphologies, such as nanowires, nanorods, and nanoflowers, has proven effective in enhancing its electrochemical performance. Stacking nanowire structures is of interest as they increase the open space by forming an interconnected network, thus facilitating favorable diffusion pathways for sodium ions. Concurrently, the substantial increase in the electrolyte contact area efficiently mitigates the strain induced by the volume expansion associated with the repetitive migration and insertion of sodium ions. Based on previous research, this work presents the structural design of flexible MnO₂/polyaniline (MnO₂/PANI) nanowires assembled on carbon cloth (CC), an innovation in MnO₂ modification. Compared to conventional MnO₂ nanowires, the MnO₂/PANI nanowires exhibit enhanced structural stability and improved dynamic performance, thereby marking a significant advancement in their material properties. This MnO₂/PANI composite exhibits a rate capacity of approximately 200 mA h g⁻¹ after 60 cycles at a current density of 0.1 A g⁻¹, and maintains a rate capacity of 182 mA h g⁻¹ even after 200 cycles under the same current density. This study not only provides new insights into the underlying mechanisms governing energy storage in MnO₂/PANI nanowires but also paves the way for their further development and optimization as anodes for sodium-ion batteries, thereby opening up fresh avenues for research and application. Full article

Polyaniline (PANI) is among the most widely studied conducting polymers due to its potential technological applications in various fields. Recently, PANI-based hybrid materials have played an important role in the development of energy storage and conversion systems. The aim of the present work is the investigation of the simultaneous electrochemical growth of PANI and Ta₂O₅ on the Ta substrate and the characterization of the morphology, redox behavior and pseudocapacitive properties of the resulting micro- or nanostructured composite thin films. A well-adherent conductive Ta₂O₅-PANI composite film was first formed using cyclic voltammetry on Ta that facilitates the on-top electrodeposition of single PANI via an autocatalytic mechanism. The electrochemical characterization of the Ta|Ta₂O₅-PANI|PANI electrodes reveals unique redox properties of PANI not shown previously upon using PANI electrodeposition on Ta. Scanning electron microscopy shows that the morphology of the electrodeposited films comprises nano- or microspheres that may develop into nano- or microrods when the polymerization proceeds. Preliminary evaluation of the capacitive properties of the Ta|Ta₂O₅-PANI|PANI electrode shows adequately high specific capacitance values as high as 1130 F g⁻¹ (at 9.2 mA cm⁻²), depending on the electrochemical parameters, as well as adequate stability (~80% retention after 100 cycles), indicating their potential application as energy storage devices. Full article

This Special Issue includes 12 research papers on the development of various materials for adsorbing different contaminants in water, such as Sb, Cr(VI), Cu(II), Zn(II), fluorine, phenol, dyes (indigo carmine, Congo red, methylene blue, and crystal violet), and drugs (dlevofloxacin, captopril, and diclofenac, and paracetamol). The commercial, natural, and synthetic materials used as adsorbents comprise commercial activated carbon, natural clay and montmorillonite, biosorbent based on sugarcane bagasse or algal, graphene oxide, graphene oxide-based magnetic nanomaterial, mesoporous Zr-G-C₃N₄ nanomaterial, nitrogen-doped core–shell mesoporous carbonaceous nano-sphere, magnetic Fe-C-N composite, polyaniline-immobilized ZnO nanorod, and hydroxy-iron/acid–base-modified sepiolite composite. Various operational conditions are evaluated under batch adsorption experiments, such as pH, NaCl, solid/liquid ratio, stirring speed, contact time, solution temperature, initial adsorbate concentration. The re-usability of laden materials is evaluated through adsorption–desorption cycles. Adsorption kinetics, isotherm, thermodynamics, and mechanisms are studied and discussed. Machine learning processes and statistical physics models are also applied in the field of adsorption science and technology. Full article

The elimination of toxic heavy metal ions from wastewater has been found to be of great importance in human as well marine animal wellbeing. Among various heavy metals, Cr (VI) has been found to be one of the highly toxic and carcinogenic heavy metals which are found to be dissolved in the water stream, the urgent treatment of which needs to be a priority. The present study demonstrates the fabrication of zinc oxide nanorods (ZnO NRs) and an immobilized polyaniline nanorod (ZnO@PAni NR) composite through an in situ free radical polymerization reactions. The material synthesis and purity were verified by X-ray diffractometer (XRD), Fourier transform infrared (FTIR), scanning electron microscope (SEM), energy dispersive spectroscope (EDS), and transmission electron microscope (TEM). Further, ZnO@PAni NRs were applied as an adsorbent for Cr (VI) in the aquatic system and exhibited a tremendous removal efficiency of 98.76%. The impact of operating parameters such as dose effect and pH on adsorption properties were studied. The uptake mechanism of Cr (VI) by ZnO@PAni was best explained by pseudo-second-order reaction, which suggested that the adsorption of Cr (VI) by the synthesized adsorbent material was processed by chemisorption, i.e., through formation of chemical bonds. The adsorption process proved viable and endothermic thermodynamically, and best supported by a Langmuir model, suggesting a monolayer formation of Cr (VI) on the surface of ZnO@PAni NRs. Full article

Water pollution caused by the leakage and discharge of pollutants, such as dyes and heavy metal ions, can cause serious damage to the environment and human health. Therefore, it is important to design and develop adsorbent materials that are efficient and multifunctional for the removal of these pollutants. In this work, poly(vinyl alcohol-co-ethylene) (EVOH)/polyaniline (PANI) composite nanofibrous aerogels (NFAs) were fabricated via solution oxidation and blending. The aerogels were characterized by a scanning electron microscope, Fourier transform infrared spectrometry, a contact angle measuring instrument and a universal testing machine. The influences of the introduction of PANI nanorods on the structural properties of aerogels were investigated, and the adsorption performance of aerogels was also studied. The results showed that the introduction of PANI nanorods filled the fibrous network structure, reduced porosity, increased surface hydrophilicity and improved compressive strength. Furthermore, EVOH/PANI composite NFAs possess good adsorption performances for dyes and heavy metal ions: The adsorption capacities of methyl orange and chromium ions (VI) are 73.22 mg/g and 115.54 mg/g, respectively. Overall, the research suggests that EVOH/PANI NFAs have great potential as efficient and multifunctional adsorbent materials for the removal of pollutants from water. Full article

Different methods which could be used to produce colloidal dispersions of polyaniline (PANI) nano-objects without templates are described. While the methods are non-deterministic, different nano-objects (nanospheres, nanofibers, nanobelts, nanorice, nanotubes, nanorods, nanodisks, etc.) can be produced. Those most used are: (i) solution polymerization with steric stabilizers (SPS) to produce nanospheres, (ii) interfacial polymerization (IP) to produce nanofibers and (iii) solution polymerization in the presence of additives (SPA) to produce nanotubes. Oxidation of aniline in aqueous solution could produce nanotubes, nanofibers and other shapes by controlling mass transport/concentration of reactants, pH, and the presence of oligomers/additives. The different models proposed to explain the formation of various nano-objects are discussed. Mechanochemical polymerization (MCP) could produce nanofibers or nanospheres by controlling the aniline/oxidant ratio. PANI nanospheres of tunable sizes can also be produced by nanoprecipitation (NPT) of preformed PANI from its solutions using an antisolvent. The geometrical constraints to the small nano-objects made of high-molecular-weight rigid polymers are described. The conditions to produce nanostructures also affect the intrinsic properties of PANI (conductivity, crystallinity, and electroactivity). Selected technological applications of PANI nano-objects manufactured as colloidal dispersions without templates are discussed. Based on the reviewed work and models, future lines of work are proposed. Full article

Boron removal from aqueous solutions has attracted increasing attention, offering benefits for animal and plant health as well as profound significance for exploiting Salt Lake boron resources. In this work, we synthesized novel glycidol-functionalized and hydrophilic polyaniline (PANI) nanorod adsorbents, which were prepared to separate boron compounds from boric acid aqueous solutions. The as-prepared adsorbents were significantly different from the traditional polymers’ grafting reaction because they had a higher functional yield and more active position for adsorption. The maximum adsorption capacity (0.2210 mmoL∙g⁻¹) and optimal adsorption conditions (boric acid concentration of 1307 mg/L, pH = 9.82, time of 10 h) were obtained with single-factor experimentation and the response surface method (RSM). In addition, adsorption kinetics studies showed that the adsorption reaction belonged to the pseudo-first-order kinetic model, and diffusion was the key limiting factor; therefore, the adsorption equilibrium time is more than 10 h. Finally, the related possible adsorption mechanism was investigated based on the species and the diffusion of boron in the aqueous phase. Full article

Among various volatile organic compounds (VOCs) emitted from human skin, trans-2-nonenal, benzothiazole, hexyl salicylate, α-hexyl cinnamaldehyde, and isopropyl palmitate are key indicators associated with the degrees of aging. In our study, extraction and determination methods of human body odor are newly developed using headspace-in needle microextraction (HS-INME). The adsorbent was synthesized with graphene oxide:polyaniline/zinc nanorods/zeolitic imidazolate framework-8 (GO:PANI/ZNRs/ZIF−8). Then, a wire coated with the adsorbent was placed into the adsorption kit to be directly exposed to human skin as in vivo sampling and inserted into the needle so that it was able to be desorbed at the GC injector. The adsorption kit was made in-house with a 3D printer. For the in vitro method, the wire coated with the adsorbent was inserted into the needle and exposed to the headspace of the vial. When a cotton T-shirt containing body odor was transferred to a vial, the headspace of the vial was saturated with body odor VOCs. After volatile organic compounds were adsorbed in the dynamic mode, the needle was transferred to the injector for analysis of the volatile organic compounds by gas chromatography/mass spectrometry (GC/MS). The conditions of adsorbent fabrication and extraction for body odor compounds were optimized by response surface methodology (RSM). In conclusion, it was able to synthesize GO:PANI/ZNRs/ZIF−8 at the optimal condition and applicable to both in vivo and in vitro methods for body odor VOCs analysis. Full article

The thermoelectric cement-based materials can convert heat into electricity; this makes them promising candidates for impressed current cathodic protection of carbon steel. However, attempts to use the thermoelectric cement-based materials for energy conversion usually results in low conversion efficiency, because of the low electrical conductivity and Seebeck coefficient. Herein, we deposited polyaniline on the surface of MnO₂ and fabricated a cement-based thermoelectric device with added PANI/MnO₂ composite for the protection of carbon steel in alkaline chloride solution. The nanorod structure (70~80 nm in diameter) and evenly dispersed conductive PANI provide the PANI/MnO₂ composite with good electrical conductivity (1.9 ± 0.03 S/cm) and Seebeck coefficient (−7.71 × 10³ ± 50 μV/K) and, thereby, increase the Seebeck coefficient of cement-based materials to −2.02 × 10³ ± 40 μV/K and the electrical conductivity of cement-based materials to 0.015 ± 0.0003 S/cm. Based on this, the corrosion of the carbon steel was delayed after cathodic protection, which was demonstrated by the electrochemical experiment results, such as the increased resistance of the carbon steel surface from 5.16 × 10² Ω·cm² to 5.14 × 10⁴ Ω·cm², increased charge transfer resistance from 11.4 kΩ·cm² to 1.98 × 10⁶ kΩ·cm², and the decreased corrosion current density from 1.67 μA/cm² to 0.32 μA/cm², underlining the role of anti-corrosion of the PANI/MnO₂ composite in the cathodic protection system. Full article

Dye-sensitized solar cells are gaining interest in the aerospace industry, extending their applications from solar-powered drones to origami-style space-based solar power stations due to their flexibility, light weightiness, and transparency. The major issue with its widespread commercial use is the employment of expensive Pt-based counter electrodes. In this study, an attempt has been made to replace the Pt with Polyaniline (PANI)/Molybdenum sulfide (MoS₂) nanocomposite. The nanocomposites i.e., PANI-0.5wt% MoS₂, PANI-2wt%MoS₂, PANI-5wt%MoS₂, and PANI-7wt%MoS₂and PANI-9wt%MoS₂, have been synthesized and compared with standard Pt-based CE. Scanning electron microscopy, transmission electron microscopy, and X-ray diffraction methods have been utilized to study both surface morphology and structural composition. Fourier transform infrared has also been used to identify redox-active functionalities. Electron impedance spectroscopy and cyclic voltammetry have been employed to study electron transfer and catalytic activity. Finally, I-V testing has been conducted using a sun simulator. A maximum efficiency of 8.12% has been observed with 7wt% MoS₂ in the PANI matrix at 6 µm thickness, which is 2.65% higher compared to standard Pt-based CE (7.91%). This is due to high electronic conduction with the addition of MoS₂, improved catalytic activity, and the high surface area of the PANI nano-rods. Full article

In this study, ternary composites of polyaniline (PANI) with manganese dioxide (MnO₂) nanorods and carbon nanotubes (CNTs) were prepared by employing a hydrothermal methodology and in-situ oxidative polymerization of aniline. The morphological analysis by scanning electron microscopy showed that the MnO₂ possessed nanorod like structures in its pristine form, while in the ternary PANI@CNT/MnO₂ composite, coating of PANI over CNT/MnO₂, rods/tubes were evidently seen. The structural analysis by X-ray diffraction and X-ray photoelectron spectroscopy showed peaks corresponding to MnO₂, PANI and CNT, which suggested efficacy of the synthesis methodology. The electrochemical performance in contrast to individual components revealed the enhanced performance of PANI@CNT/MnO₂ composite due to the synergistic/additional effect of PANI, CNT and MnO₂ compared to pure MnO₂, PANI and PANI@CNT. The PANI@CNT/MnO₂ ternary composite exhibited an excellent specific capacity of 143.26 C g⁻¹ at a scan rate of 3 mV s⁻¹. The cyclic stability of the supercapattery (PANI@CNT/MnO₂/activated carbon)—consisting of a battery type electrode—demonstrated a gradual increase in specific capacity with continuous charge–discharge over ~1000 cycles and showed a cyclic stability of 119% compared to its initial value after 3500 cycles. Full article

Polyaniline is one of the most well studied conducting polymers due to its advanced electrical, chemical, redox and morphological properties. The high conductivity of regular polyaniline, when partially oxidized and doped under acidic conditions, has been associated with the formation of unique electronic states known as polarons and bipolarons. Alternative aniline oxidation products and interesting nanotube and nanorod forms have been observed as the synthesis conditions are varied. Solid-state NMR has offered great opportunities for structural investigations and the determination of molecular dynamics in such a complex and diverse material. This review summarizes various applications of solid-state NMR techniques to polyaniline and its derivatives and the information that can be obtained by solid-state NMR. Full article