Search Results (13)

Polymeric materials made from renewable sources that can biodegrade in the environment are attracting considerable attention as substitutes for petroleum-based polymers in many fields, including additive manufacturing and, in particular, Fused Deposition Modelling (FDM). Among the others, poly(hydroxyalkanoates) (PHAs) hold significant potential as candidates for FDM since they meet the sustainability and biodegradability standards mentioned above. However, the most utilised PHA, consisting of the poly(hydroxybutyrate) (PHB) homopolymer, has a high degree of crystallinity and low thermal stability near the melting point. As a result, its application in FDM has not yet attained mainstream adoption. Introducing a monomer with higher excluded volume, such as hydroxyvalerate, in the PHB primary structure, as in poly(hydroxybutyrate-co-valerate) (PHBV) copolymers, reduces the degree of crystallinity and the melting temperature, hence improving the PHA printability. Blending amorphous poly(lactic acid) (PLA) with PHBV enhances further PHA printability via FDM. In this work, we investigated the printability of two blends characterised by different PLA and PHBV weight ratios (25:75 and 50:50), revealing the close connection between blend microstructures, melt rheology and 3D printability. For instance, the relaxation time associated with die swelling upon extrusion determines the diameter of the extruded filament, while the viscoelastic properties the range of extrusion speed available. Through thoroughly screening printing parameters such as deposition speed, nozzle diameter, flow percentage and deposition platform temperature, we determined the optimal printing conditions for the two PLA/PHBV blends. It turned out that the blend with a 50:50 weight ratio could be printed faster and with higher accuracy. Such a conclusion was validated by replicating with remarkable fidelity high-complexity objects, such as a patient’s cancer-affected iliac crest model. Full article

A significant mechanical properties mismatch between natural bone and the material forming the orthopedic implant device can lead to its failure due to the inhomogeneous loads distribution, resulting in less dense and more fragile bone tissue (known as the stress shielding effect). The addition of nanofibrillated cellulose (NFC) to biocompatible and bioresorbable poly(3-hydroxybutyrate) (PHB) is proposed in order to tailor the PHB mechanical properties to different bone types. Specifically, the proposed approach offers an effective strategy to develop a supporting material, suitable for bone tissue regeneration, where stiffness, mechanical strength, hardness, and impact resistance can be tuned. The desired homogeneous blend formation and fine-tuning of PHB mechanical properties have been achieved thanks to the specific design and synthesis of a PHB/PEG diblock copolymer that is able to compatibilize the two compounds. Moreover, the typical high hydrophobicity of PHB is significantly reduced when NFC is added in presence of the developed diblock copolymer, thus creating a potential cue for supporting bone tissue growth. Hence, the presented outcomes contribute to the medical community development by translating the research results into clinical practice for designing bio-based materials for prosthetic devices. Full article

Biocompatible gels based on poly(3-hydroxyalkanoate)s (PHAs) were developed by radical polymerization in the presence of poly(ethylene glycol) diacrylate (PEGDA). In order to elaborate cross-linked networks based on PEGDA and PHAs, several PHAs were tested; saturated PHAs, such as poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) or poly(3-hydroxyoctanoate) (PHO), and an unsaturated PHA, poly(3-hydroxyoctanoate-co-3-hydroxyundecenoate) PHOU. The PHA_xPEGDA_1−x networks obtained in this work were studied by FTIR, Raman spectroscopy, DSC, TGA and NMR. The microscopic structure varied according to the mass proportions between the two polymers. Time Domain ¹H DQ NMR measurements demonstrated that in the case of the unsaturated PHA, it was chemically crosslinked with PEGDA, due to the presence of double bonds in the lateral groups. The organogels were able to swell in organic solvents, such as THF, up to 2000% and in water up to 86%. It was observed by rheological analysis that the stiffness of the networks was dependent on the content of PHA and on the degree of cross-linking. The biocompatible characters of PHOU and PEGDA were not affected by the formation of the networks and these networks had the advantage of being non-cytotoxic to immortalized C2C12 myoblast cells. Full article

The feasibility of synthesis of functionalized poly(3-hydroxybutanoic acid) analogue and its copolymers via ring-opening polymerization of β-butyrolactone mediated by activated anionic initiators is presented. Using these new synthetic approaches, polyesters with a defined chemical structure of the end groups, as well as block, graft, and random copolymers, have been obtained and characterized by modern instrumental techniques, with special emphasis on ESI-MS. The relationship between the structure and properties of the prepared polymeric materials is also discussed. Full article

Poly(hydroxyalkanoates) (PHAs) with different material properties, namely, the homopolymer poly(3-hydroxybutyrate), P(3HB), and the copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate, P(3HB-co-3HV), with a 3HV of 25 wt.%, were used for the preparation of porous biopolymeric scaffolds. Solvent casting with particulate leaching (SCPL) and emulsion templating were evaluated to process these biopolymers in porous scaffolds. SCPL scaffolds were highly hydrophilic (>170% swelling in water) but fragile, probably due to the increase of the polymer’s polydispersity index and its high porosity (>50%). In contrast, the emulsion templating technique resulted in scaffolds with a good compromise between porosity (27–49% porosity) and hydrophilicity (>30% water swelling) and without impairing their mechanical properties (3.18–3.35 MPa tensile strength and 0.07–0.11 MPa Young’s Modulus). These specifications are in the same range compared to other polymer-based scaffolds developed for tissue engineering. P(3HB-co-3HV) displayed the best overall properties, namely, lower crystallinity (11.3%) and higher flexibility (14.8% elongation at break. Our findings highlight the potency of our natural biopolyesters for the future development of novel porous scaffolds in tissue engineering, thanks also to their safety and biodegradability. Full article

A novel generation of gels based on medium chain length poly(3-hydroxyalkanoate)s, mcl-PHAs, were developed by using ionic interactions. First, water soluble mcl-PHAs containing sulfonate groups were obtained by thiol-ene reaction in the presence of sodium-3-mercapto-1-ethanesulfonate. Anionic PHAs were physically crosslinked by divalent inorganic cations Ca²⁺, Ba²⁺, Mg²⁺ or by ammonium derivatives of gallic acid GA-N(CH₃)₃⁺ or tannic acid TA-N(CH₃)₃⁺. The ammonium derivatives were designed through the chemical modification of gallic acid GA or tannic acid TA with glycidyl trimethyl ammonium chloride (GTMA). The results clearly demonstrated that the formation of the networks depends on the nature of the cations. A low viscoelastic network having an elastic around 40 Pa is formed in the presence of Ca²⁺. Although the gel formation is not possible in the presence of GA-N(CH₃)₃⁺, the mechanical properties increased in the presence of TA-N(CH₃)₃⁺ with an elastic modulus G’ around 4200 Pa. The PHOSO₃⁻/TA-N(CH₃)₃⁺ gels having antioxidant activity, due to the presence of tannic acid, remained stable for at least 5 months. Thus, the stability of these novel networks based on PHA encourage their use in the development of active biomaterials. Full article

Biocompatible and biodegradable bacterial polyesters, poly(hydroxyalkanoates) (PHAs), were combined with linalool, a well-known monoterpene, extracted from spice plants to design novel antibacterial materials. Their chemical association by a photo-induced thiol-ene reaction provided materials having both high mechanical resistance and flexibility. The influence of the nature of the crosslinking agent and the weight ratio of linalool on the thermo-mechanical performances were carefully evaluated. The elongation at break increases from 7% for the native PHA to 40% for PHA–linalool co-networks using a tetrafunctional cross-linking agent. The materials highlighted tremendous anti-adherence properties against Escherichia coli and Staphylococcus aureus by increasing linalool ratios. A significant decrease in antibacterial adhesion of 63% and 82% was observed for E. coli and S. aureus, respectively. Full article

Band-selective (bs) HSQC, improving spectral resolution by restriction of the heteronuclear dimension without inducing spectral folding, has been recently used for polymer tacticity determination. Herein is reported an evaluation of various bs-HSQC and bs-HMBC sequences, first from a methodological point of view (selectivity, dependence to INEPT interpulse delay or relaxation delay), using the cyclic peptide cyclosporin selected as a model compound, and then from an applicative approach, comparing tacticity determined from bs-HSQC and bs-HMBC experiments to the one obtained from 1D ¹³C{¹H} on poly(3-hydroxyalkanoate)s samples. For HSQC sequences, the ¹³C selectivity scheme consisting in substituting a ¹³C broadband refocalization by a selective one revealed itself problematic, with unwanted aliased signals, whereas the insertion of double pulsed field gradients spin-echo (DPFGSE) or the use of opposite sign gradients bracketing a selective refocalization gave satisfactory results. Determination of the probability of syndiotactic enchainments, P_s, by bs-HSQC is fully consistent and no precision loss was observed when decreasing acquisition time (37 min vs. 106 min for 1D ¹³C{¹H}). Bs-HMBC, although not straightforwardly applicable for tacticity determination, could provide (after a calibration step) an alternative for compounds of which only ¹³C carbonyl signals are resolved enough for discriminating between syndiotactic and isotactic configurations. Full article

Reversibility is a mandatory requirement for materials used in heritage conservation, including hydrophobic protectives. Nevertheless, current protectives for stone are not actually reversible as they remain on the surfaces for a long time after their hydrophobicity is lost and can hardly be removed. Ineffective and aged coatings may jeopardise the stone re-treatability and further conservation interventions. This paper aims at investigating the performance of PHAs-based coatings for stone protection, their main potential being the ‘reversibility by biodegradation’ once water repellency ended. The biopolymer coatings were applied to three different kinds of stone, representative of lithotypes used in historic architecture: sandstone, limestone and marble. Spray, poultice and dip-coating were tested as coating techniques. The effectiveness and compatibility of the protectives were evaluated in terms of capillary water absorption, static and dynamic contact angles, water vapour diffusion, colour alteration and surface morphology. The stones’ wettability after application of two commercial protectives was investigated too, for comparison. Finally, samples were subjected to artificial ageing to investigate their solar light stability. Promising results in terms of efficacy and compatibility were obtained, although the PHAs-based formulations developed here still need improvement for increased durability and on-site applicability. Full article

Pseudomonas sp. 61-3 accumulates a blend of poly(3-hydroxybutyrate) [P(3HB)] homopolymer and a random copolymer, poly(3-hydroxybutyrate-co-3-hydroxyalkanoate) [P(3HB-co-3HA)], consisting of 3HA units of 4–12 carbon atoms. Pseudomonas sp. 61-3 possesses two types of PHA synthases, PHB synthase (PhbC) and PHA synthases (PhaC1 and PhaC2), encoded by the phb and pha loci, respectively. The P(94 mol% 3HB-co-6 mol% 3HA) copolymer synthesized by the recombinant strain of Pseudomonas sp. 61-3 (phbC::tet) harboring additional copies of phaC1 gene is known to have desirable physical properties and to be a flexible material with moderate toughness, similar to low-density polyethylene. In this study, we focused on the production of the P(3HB-co-3HA) copolymer using steamed soybean wastewater, a by-product in brewing miso, which is a traditional Japanese seasoning. The steamed soybean wastewater was spray-dried to produce a powder (SWP) and used as the sole nitrogen source for the synthesis of P(3HB-co-3HA) by the Pseudomonas sp. 61-3 recombinant strain. Hydrolyzed SWP (HSWP) was also used as a carbon and nitrogen source. P(3HB-co-3HA)s with relatively high 3HB fractions could be synthesized by a recombinant strain of Pseudomonas sp. 61-3 (phbC::tet) harboring additional copies of the phaC1 gene in the presence of 2% glucose and 10–20 g/L SWP as the sole nitrogen source, producing a PHA concentration of 1.0–1.4 g/L. When HSWP was added to a nitrogen- and carbon-free medium, the recombinant strain could synthesize PHA without glucose as a carbon source. The recombinant strain accumulated 32 wt% P(3HB-co-3HA) containing 80 mol% 3HB and 20 mol% medium-chain-length 3HA with a PHA concentration of 1.0 g/L when 50 g/L of HSWP was used. The PHA production yield was estimated as 20 mg-PHA/g-HSWP, which equates to approximately 1.0 g-PHA per liter of soybean wastewater. Full article

Non-substituted racemic poly(DL-lactic acid) (PLA) and substituted racemic poly(DL-lactic acid)s or poly(DL-2-hydroxyalkanoic acid)s with different side-chain lengths, i.e., poly(DL-2-hydroxybutanoic acid) (PBA), poly(DL-2-hydroxyhexanoic acid) (PHA), and poly(DL-2-hydroxydecanoic acid) (PDA) were synthesized by acid-catalyzed polycondensation of DL-lactic acid (LA), DL-2-hydroxybutanoic acid (BA), DL-2-hydroxyhexanoic acid (HA), and DL-2-hydroxydecanoic acid (DA), respectively. The hydrolytic degradation behavior was investigated in phosphate-buffered solution at 80 and 37 °C by gravimetry and gel permeation chromatography. It was found that the reactivity of monomers during polycondensation as monitored by the degree of polymerization (DP) decreased in the following order: LA > DA > BA > HA. The hydrolytic degradation rate traced by DP and weight loss at 80 °C decreased in the following order: PLA > PDA > PHA > PBA and that monitored by DP at 37 °C decreased in the following order: PLA > PDA > PBA > PHA. LA and PLA had the highest reactivity during polymerization and hydrolytic degradation rate, respectively, and were followed by DA and PDA. BA, HA, PBA, and PHA had the lowest reactivity during polymerization and hydrolytic degradation rate. The findings of the present study strongly suggest that inter-chain interactions play a major role in the reactivity of non-substituted and substituted LA monomers and degradation rate of the non-substituted and substituted PLA, along with steric hindrance of the side chains as can be expected. Full article

Biodegradable nanofibers are expected to be promising scaffold materials for biomedical engineering, however, biomedical applications require control of the degradation behavior and tissue response of nanofiber scaffolds in vivo. For this purpose, electrospun nanofibers of poly(hydroxyalkanoate)s (PHAs) and poly(lactide)s (PLAs) were subjected to degradation tests in vitro and in vivo. In this review, characterization and biocompatibility of nanofibers derived from PHAs and PLAs are described. In particular, the effects of the crystalline structure of poly[(R)-3-hydroxybutyrate], stereocomplex structure of PLA, and monomer composition of PHA on the degradation behaviors are described in detail. These studies show the potential of biodegradable polyester nanofibers as scaffold material, for which suitable degradation rate and regulated interaction with surrounding tissues are required. Full article