Search Results (60)

An innovative strategy for collagen self-assembly with accelerated intra and extrafibrillar mineralisation is introduced to generate bone scaffolds with biomimetic properties. This method, termed Rapid Fibrillogenic Mineralisation (RFM), leverages coprecipitation with 10× Simulated Body Fluid (10× SBF) during fibril formation to maximise nucleation, particularly within intrafibrillar zones at molecular termini. Densification is achieved within minutes via plastic compression driven by capillary action, producing bone-like scaffold density without compromising the collagen matrix. Transmission electron microscopy confirms intrafibrillar hydroxyapatite crystals within 15 min, while X-ray diffraction demonstrates distinct HA peaks across groups. Scanning electron microscopy verified extrafibrillar mineralisation after 4 h, with saturation by 6 h, yielding ‘nanoflower’ crystal clusters. Infrared spectra showed increased carbonate content over time, indicating lattice substitutions characteristic of natural bone. Enhanced mineralisation translated into significant mechanical gains as Dynamic Mechanical Analysis revealed compressive moduli approaching cancellous bone (up to 283 ± 31 MPa). In addition, a decrease in the piezoelectric coefficient occurs with increased mineralisation process, highlighting the effects of mineral inclusions on collagen fibre composition and anisotropy. Biologically, mineralised scaffolds supported cellular growth compared to collagen controls. RFM thus enables rapid, reproducible fabrication of biomimetic bone scaffolds that closely emulate native mineralisation patterns and mechanical behaviour. Beyond offering a practical route for scaffold production in tissue engineering, the process also provides new insights into bone physiology and in vitro modelling. By reshaping collagen into a synthetic echo of nature’s bone, RFM establishes a rapid approach for designing functional biomaterials with translational potential. Full article

For critical-sized bone defects, bioactive implants are indispensable. Although advanced three-dimensional (3D) printing technology enables the precise manufacturing of customized bone scaffolds, implant-associated infections (IAIs) remain a significant clinical challenge. Moreover, traditional passive antibacterial coatings often face problems such as uncontrolled release of antibacterial agents and insufficient long-term antibacterial efficacy. This review elaborates on the transformation of antibacterial strategies in the field of bone tissue engineering (BTE) from “passive” to “smart responsive” modes. We summarize the endogenous (such as pH, temperature, reactive oxygen species (ROS), and enzyme) and exogenous (such as light, microwave, and ultrasound) response systems. Notably, the ultrasound-driven strategy is highly emphasized due to its outstanding deep tissue penetrability and dual functional characteristics: it can not only eliminate stubborn biofilms through the sonodynamic effect by generating ROS, but also promote osteogenesis through the piezoelectric effect. Additionally, we also discuss the recent progress of artificial intelligence (AI) in the field of bone scaffold manufacturing. AI-driven algorithms help to rapidly optimize complex scaffold structures and accurately predict their mechanical properties, thereby effectively avoiding the inefficiencies brought about by the traditional “trial and error” method. In conclusion, combining AI-assisted manufacturing technology with smart responsive antibacterial strategies opens up a highly promising frontier field for the development of personalized and infection-free bone implants. Full article

This study focuses on the development and characterization of advanced composite materials based on poly(ε-caprolactone) (PCL) and poly(vinylidene fluoride) (PVDF), with or without silver nanoparticles (AgNPs), planned for peripheral nerve or bone regeneration. The complementary properties of PCL (biocompatibility and biodegradability) and PVDF (mechanical stability and piezoelectric functionality) were exploited by blending the polymers in different ratios, resulting in binary (PCL/PVDF) and ternary (PCL/PVDF/AgNPs) composites. Green-synthesized AgNPs were integrated to enhance antimicrobial activity and to support tissue repair through improved signal transmission. Functional thin films and electrospun fibres were obtained and subjected to advanced characterization techniques, including scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and thermal analysis. The results demonstrated appropriate morphology, chemical composition, structural stability, and favourable interactions with simulated physiological media. Preliminary biocompatibility assays confirmed good cell viability, supporting the biomedical applicability of the designed scaffolds. Overall, the obtained results highlight the potential of AgNPs-functionalized PCL/PVDF binary and ternary composites as promising candidates for flexible, durable, and bioactive implants in peripheral nerve or bone regeneration. Full article

Piezoelectric biomaterials have attracted considerable interest in osteochondral tissue engineering owing to their inherent ability to produce electrical signals in response to mechanical stimuli without external power, thereby closely mimicking the physiological electrical microenvironment required for tissue regeneration. This review comprehensively summarizes recent insights into biological piezoelectricity from the molecular to the macroscopic level, highlighting its interplay with streaming potentials and its regulatory roles in bone and cartilage regeneration. We critically analyze recent advances in major piezoelectric material systems, including ceramics, polymers, and composite scaffolds, with emphasis on their structural characteristics, bioactive performance, and suitability for tissue-specific repair. Among them, polymer-based composite and hybrid piezoelectric scaffolds appear particularly promising for the development of flexible, high-performance osteochondral repair platforms, as they offer a more favorable balance between mechanical compliance, electromechanical output, and biological adaptability. Despite encouraging preclinical findings, significant challenges remain, including biocompatibility, controlled degradation kinetics, and the precise modulation of electrical cues for specific biological contexts. To address these barriers, future research should focus on optimizing scaffold design, integrating responsive and multimodal stimulation strategies, and establishing standardized protocols for preclinical evaluation and clinical translation. Overall, piezoelectric biomaterials hold substantial potential for the development of innovative regenerative therapies for complex osteochondral defects. Full article

Biomaterials are engineered to interact with biological systems for therapeutic or diagnostic purposes. Among them, natural biomaterials offer important advantages over many synthetic polymers, including intrinsic biocompatibility, non-toxicity and biodegradability. Silk fibroin, a fibrous protein derived mainly from Bombyx mori cocoons, has re-emerged as a particularly versatile platform because it combines favourable mechanical, thermal, electrical and optical properties with aqueous processing and tuneable degradation. In this review, we first summarise the key structural, physicochemical and functional properties of regenerated silk fibroin, including its mechanical behaviour, thermal stability, dielectric and piezoelectric response, optical transparency and low autofluorescence. We then describe how extraction and regeneration protocols are used to produce defined material formats—fibres and nanofibrous mats, porous 3D scaffolds and hydrogels, sub-micron particles, thin films and microstructured devices—and outline major functionalisation strategies, ranging from physical blending and encapsulation to covalent chemistry, genetic engineering of recombinant silk variants, and enzyme-mediated conjugation approaches. Building on this foundation, we critically examine biomedical applications of silk fibroin with a particular emphasis on (i) hybrid silk–fluorophore systems for bioimaging and biosensing (nanodiamonds, quantum dots and organic dyes), (ii) optical fibre, wearable and edible sensors for health and food monitoring, (iii) wound dressings and wound-sensing platforms, and (iv) tissue engineering scaffolds and drug-delivery depots. Finally, we discuss current limitations, including process variability, the trade-offs introduced by blending and cross-linking, and the challenges posed by non-degradable inorganic fillers and clinical translation. Together, these perspectives highlight silk fibroin’s potential and constraints as a multifunctional biomaterial for next-generation biomedical devices and theranostic systems. Full article

Low-intensity pulsed ultrasound (LIPUS) has emerged as a versatile, non-invasive physical modality with growing potential in regenerative medicine and neural repair. Advances in ultrasound physics and biomedical engineering have enabled precise spatiotemporal control of acoustic stimulation, positioning therapeutic ultrasound as an alternative to conventional pharmacological and surgical interventions that often suffer from limited targeting and substantial side effects. Unlike high-intensity focused ultrasound, which relies primarily on thermal ablation, LIPUS operates within a low-energy, non-thermal regime and modulates cellular behavior through mechanical cues, mechano-transduction, and downstream biological responses. Accumulating evidence demonstrates that LIPUS regulates calcium dynamics, cytoskeletal remodeling, neurotrophic factor expression, inflammation, myelination, and local vascular remodeling, thereby promoting functional recovery in both peripheral and central nerve injury models. Moreover, the integration of LIPUS with biomaterials, including piezoelectric scaffolds and acoustically responsive drug delivery systems, has expanded its functionality from direct stimulation to on-demand electrical signaling and controlled therapeutic release. Despite these advances, challenges remain regarding parameter standardization, mechanistic consistency, and clinical translation. In this review, we summarize the systems, parameters, and biological mechanisms underlying LIPUS, discuss its applications in peripheral and central nerve injury repair, and highlight emerging strategies and translational barriers toward intelligent, multimodal, and personalized ultrasound-based therapies. Full article

Microwave-assisted heating (MWH) has established itself as a transformative and energy-efficient paradigm for advanced materials processing. This review provides a comprehensive overview of the advances achieved at the CNR-SCITEC laboratories in Genoa. In this context, a customized microwave platform has been strategically employed for the synthesis, sintering, foaming, and melting of diverse inorganic, organic, and hybrid systems. The spectrum of materials investigated includes superconducting magnesium diboride (MgB₂), hydroxyapatite-based scaffolds, polyethylene components obtained via microwave-assisted rotational molding, cork-based sound-adsorbing composites, recycled expanded polystyrene (rEPS) panels, and polyvinylidene fluoride (PVDF) piezoelectric films. Across the case studies, MWH demonstrated a superior capacity for reducing energy consumption and processing times while maintaining—or even enhancing—the target functional properties. Furthermore, this work evaluates the technological maturity and emerging market opportunities of microwave-based processing, positioning it as a key and sustainable platform for next-generation materials development. Full article

Peripheral nerve injuries, particularly those involving the sciatic nerve, remain a major clinical challenge due to incomplete functional recovery and the limited translation of preclinical advances into effective therapies. This review synthesizes current evidence on the phase-specific evaluation of sciatic nerve regeneration in preclinical models, integrating behavioral, sensory, electrophysiological, and morphological approaches across the acute, subacute (Wallerian degeneration), early regenerative, and late regenerative phases. By mapping functional readouts onto the underlying biological events of each phase, we highlight how tools such as the Sciatic Functional Index, Beam Walk test, Rotarod test, nerve conduction studies, and nociceptive assays provide complementary and often non-interchangeable information about motor, sensory, and neuromuscular recovery. We further examine emerging therapeutic strategies, including intraoperative electrical stimulation, immunomodulation, platelet-rich plasma, bioengineered scaffolds, conductive and piezoelectric conduits, exosome-based hydrogels, tacrolimus delivery systems, and small molecules, emphasizing the importance of aligning their mechanisms of action with the dynamic microenvironment of peripheral nerve repair. Despite substantial advancements in experimental models, an analysis of publication trends and registries reveals a persistent translational gap, with remarkably few clinical trials relative to the high volume of preclinical studies. To illustrate how mechanistic insights can be complemented by molecular-level characterization, we also present a targeted computational analysis of alpha-lipoic acid (ALA,) including frontier orbital energies, physicochemical descriptors, and docking interactions with IL-6, TGF-β, and a growth-factor receptor—performed solely for this molecule due to its documented structural availability and relevance. By presenting an integrated, phase-specific framework for functional assessment and therapeutic evaluation, this review underscores the need for standardized, biologically aligned methodologies to improve the rigor, comparability, and clinical relevance of future studies in sciatic nerve regeneration. Full article

Bone regeneration relies on the coordinated interplay between mechanical and biological cues. Piezoelectric composites, capable of converting mechanical strain into electrical signals, offer a promising approach to stimulate osteogenesis. This study aimed to develop and characterize polycaprolactone (PCL) and barium titanate (BaTiO₃) composite scaffolds fabricated through thermally induced phase separation (TIPS), and to systematically evaluate the effects of polymer concentration and ceramic incorporation on scaffold morphology, porosity, mechanical properties, and cytocompatibility were systematically evaluated. The resulting scaffolds exhibited a highly porous, interconnected architecture, with 9% PCL formulation showing the most uniform morphology and consistent mechanical and biological behavior. Incorporation of BaTiO₃ did not alter pore structure or compromise cytocompatibility but slightly enhanced stiffness and surface uniformity. SEM-based image analysis confirmed homogeneous BaTiO₃ dispersion across all formulations. MTT assays and confocal microscopy demonstrated robust pre-osteoblast adhesion and spreading, particularly on denser composite scaffolds, confirming that the inclusion of BaTiO₃ supports a favorable environment for cell proliferation. Overall, optimizing polymer concentration and ceramic dispersion enables fabrication of structurally coherent, cytocompatible scaffolds. The findings establish structure–property–biology relationships that serve as a baseline for future investigations into the electromechanical behavior of PCL/BaTiO₃ scaffolds and their potential to promote osteogenic differentiation under physiological loading. Full article

The regeneration of large segmental bone defects remains a significant challenge. While electrical stimulation has demonstrated the potential to accelerate bone healing, clinical translation has been hindered by the lack of safe, localized delivery methods. In this study, we present a novel strategy combining piezoelectric and electrically conductive polymers with allograft demineralized bones to create stimuli-responsive, biologically relevant scaffolds via pneumatic 3D printing. These scaffolds exhibit enhanced piezoelectric potential and tunable electrical properties, enabling both electrical and mechanical stimulation of cells (without external stimulators). Under dynamic culturing conditions (i.e., ultrasound stimulation), human bone marrow-derived mesenchymal stromal cells cultured on these scaffolds displayed significantly elevated osteogenic protein expression (i.e., alkaline phosphatase and osteocalcin) and mineralization (confirmed via xylenol orange mineral staining) after two weeks. This work introduces a bioinspired, printable ink in conjunction with a simple fabrication approach for creating dual-responsive scaffolds with high potential for functional bone tissue regeneration. Full article

Background/Objectives: Polymeric monoaxial nanofibers are gaining prominence due to their numerous applications, particularly in functional scenarios such as wound management. The study successfully developed and built a special-purpose vessel and device for fabricating polymeric nanofibers. Fabrication of composite scaffolds from piezoelectric poly(vinylidenefluoride-trifluoroethylene) copolymer (PVDF-TrFE) nanofibers encapsulated with myrrh extract was investigated. Methods: The gyrospun nanofibers were characterized using SEM, EDX, FTIR, XRD, and TGA to assess the properties of the composite materials. The study also investigated the release profile of myrrh extract from the nanofibers, demonstrating its potential for sustained drug delivery. The composite’s antimicrobial properties were evaluated using the disc diffusion method against various pathogenic microbes, showcasing their effectiveness. Results: It was found that an 18% (w/v) PVDF-TrFE concentration produces the best fiber mats compared to 20% and 25%, resulting in an average fiber diameter of 411 nm. Myrrh extract was added in varying amounts (10%, 15%, and 20%), with the best average fiber diameter identified at 10%, measuring 436 nm. The results indicated that the composite nanofibers were uniform, bead-free, and aligned without myrrh. The study observed a cumulative release of 79.66% myrrh over 72 h. The release profile showed an initial burst release of 46.85% within the first six hours, followed by a sustained release phase. Encapsulation efficiency was 89.8%, with a drug loading efficiency of 30%. Antibacterial activity peaked at 20% myrrh extract. S. mutans was the most sensitive pathogen to myrrh extract. Conclusions: Due to the piezoelectric effect of PVDF-TrFE and the significant antibacterial activity of myrrh, the prepared biohybrid nanofibers will open new avenues toward tissue engineering and wound healing applications. Full article

This study focuses on preparing piezoelectric polyvinylidene fluoride (PVDF) nanocomposites reinforced with silver nanoparticles (AgNPs) using an electrospinning process. The aim of this study is to assess AgNPs’ influence on the piezoelectric properties of PVDF and, therefore, create an optimal piezoelectric composite with enhanced properties, enabling its application in various fields both as sensor and actuator. Because electrical stimuli have proven to have a positive influence in tissue engineering, combined with AgNPs, which have antimicrobial properties, these composites demonstrate a promising opportunity for application as biomedical scaffolds. The proposed scaffolds were characterized by scanning electron microscopy, energy-dispersive X-ray spectroscopy and Fourier transform infrared spectroscopy. In addition, mechanical properties are studied through tensile tests, while piezoelectric response is measured on an in-house built setup coupling mechanical stimuli and electrical response monitoring. An experimental test was combined with numerical simulations through the COMSOL Multiphysics version 6.3 software package, and this paper also presents a short review of the numerical and analytical methods used for the modelling and simulation of piezoelectric composites. Full article

Piezoelectric materials, due to their ability to generate an electric charge in response to mechanical deformation, are becoming increasingly attractive in the engineering of bone and neural tissues. This manuscript reports the effects of the addition of nanohydroxyapatite (nHA), introduction of gold nanoparticles (AuNPs) via sonochemical coating, and collector rotation speed on the formation of electroactive phases and biological properties in electrospun nanofiber scaffolds consisting of poly(vinylidene fluoride) (PVDF). FTIR, WAXS, DSC, and SEM results indicate that introduction of nHA increases the content of electroactive phases and fiber alignment. The collector rotational speed increases not only the fiber alignment but also the content of electroactive phases in PVDF and PVDF/nHA fibers. Increased fiber orientation and introduction of each of additives resulted in increased SFE and water uptake. In vitro tests conducted on MG-63 and hiPSC-NSC cells showed increased adhesion and cell proliferation. The results indicate that PVDF-based composites with nHA and AuNPs are promising candidates for the development of advanced scaffolds for bone and neural tissue engineering applications, combining electrical functionality and biological activity to support tissue regeneration. Full article

This study focused on the development of a suitable synthetic polymer scaffold for bone tissue engineering applications within the biomedical field. The investigation centered on electrospun polyvinylidene fluoride (PVDF) nanofibers, examining their intrinsic properties and biocompatibility with the human osteosarcoma cell line Saos-2. The influence of oxygen, argon, or combined plasma treatment on the scaffold’s characteristics was explored. A comprehensive design strategy is outlined for the fabrication of a suitable PVDF scaffold, encompassing the optimization of electrospinning parameters with rotating collector and plasma etching conditions to facilitate a subsequent osteoblast cell culture. The proposed methodology involves the fabrication of the PVDF tissue scaffold, followed by a rigorous series of fundamental analyses encompassing the structural integrity, chemical composition, wettability, crystalline phase content, and cell adhesion properties. Full article

Ligament tears can strongly influence an individual’s daily life and ability to engage in physical activities. It is essential to develop artificial scaffolds for ligament repairs in order to effectively restore damaged ligaments. In this experiment, the objective was to evaluate fibrous membranes as scaffolds for ligament repair. These membranes were created through electrospinning using piezoelectric polyvinylidene fluoride (PVDF) composites, which contained 1 wt.% and 3 wt.% of copper-impregnated nanohydroxyapatite (Cu-nHA). The proposed electrospun membrane would feature an aligned fiber structure achieved through high-speed roller stretching, which mimics the properties of biomimetic ligaments. Nanoparticles of Cu-nHA had been composited into PVDF to enhance the pirzoelectric β-phase of the PVDF crystallines. The study assessed the physicochemical properties, antibacterial activity, and biocompatibility of the membranes in vitro. A microstructure analysis revealed that the composite membrane exhibited a bionic structure with aligned fibers resembling human ligaments. The piezoelectric performance of the experimental group containing 3 wt.% Cu-nHA was significantly improved to 25.02 ± 0.68 V/g·m⁻² compared with that of the pure PVDF group at 18.98 ± 1.18 V/g·m⁻². Further enhancement in piezoelectric performance by 31.8% was achieved by manipulating the semicrystalline structures. Antibacterial and cytotoxicity tests showed that the composite membrane inherited the antibacterial properties of Cu-nHA nanoparticles without causing cytotoxic reactions. Tensile tests revealed that the membrane’s flexibility of strain was adequate for use as artificial scaffolds for ligaments. In particular, the mechanical properties of the two experimental groups containing Cu-nHA were significantly enhanced compared with those of the pure PVDF group. The favorable piezoelectric and flexible properties are highly beneficial for ligament tissue regeneration. This study successfully developed PVDF/Cu-nHA piezoelectric fibers for a biocompatible, unidirectional piezoelectric membrane with potential applications as ligament repair scaffolds. Full article