Search Results (419)

The topic of environmental pollution by petroleum products is highly relevant due to rapid urbanisation, including industrial development, road infrastructure and fuel distribution. Potential threat areas include refineries, fuel stations, pipelines, warehouses and transshipment bases, as well as sites affected by accidents or fuel spills. This study aimed to determine whether organic and mineral materials could mitigate the effects of diesel oil pollution on the soil’s trace element content. The used materials were compost, bentonite and calcium oxide. Diesel oil pollution had the most pronounced effect on the levels of Cd, Ni, Fe and Co. The levels of the first three elements increased, while the level of Co decreased by 53%. Lower doses of diesel oil (2.5 and 5 cm³ per kg of soil) induced an increase in the levels of the other trace elements, while higher doses caused a reduction, especially in Cr. All materials applied to the soil (compost, bentonite and calcium oxide) reduced the content of Ni, Cr and Fe. Compost and calcium oxide also increased Co accumulation in the soil. Bentonite had the strongest reducing effect on the Ni and Cr contents of the soil, reducing them by 42% and 53%, respectively. Meanwhile, calcium oxide had the strongest reducing effect on Fe and Co accumulation, reducing it by 12% and 31%, respectively. Inverse relationships were recorded for Cd (mainly bentonite), Pb (especially compost), Cu (mainly compost), Mn (mainly bentonite) and Zn (only compost) content in the soil. At the most contaminated site, the application of bentonite reduced the accumulation of Pb, Zn and Mn in the soil, while the application of compost reduced the accumulation of Cd. Applying various materials, particularly bentonite and compost, limits the content of certain trace elements in the soil. This has a positive impact on reducing the effect of minor diesel oil pollution on soil properties and can promote the proper growth of plant biomass. Full article

Groundwater at petroleum-contaminated sites typically exhibits elevated dissolved inorganic carbon (DIC) levels due to hydrocarbon biodegradation; however, our prior field investigations revealed an enigmatic DIC depletion anomaly that starkly contradicts this global pattern and points to an unrecognized carbon sink. In a breakthrough demonstration, this study provides the first experimental confirmation that sulfur-oxidizing bacteria (SOB) drive substantial carbon sequestration via a coupled sulfur oxidation autotrophic assimilation process. Through integrated hydrochemical monitoring and 16S rRNA sequencing in an enrichment culture system, we captured the complete DIC transformation trajectory: heterotrophic acetate degradation initially increased DIC to 370 mg/L, but subsequent autotrophic assimilation by SOB dramatically reduced DIC to 270 mg/L, yielding a net consumption of 85 mg/L. The distinctive pH dynamics (initial alkalization followed by acidification) further corroborated microbial regulation of carbon cycling. Critically, Pseudomonas stutzeri and P. alcaliphila were identified as the dominant carbon-fixing agents. These findings definitively establish that chemolithoautotrophic SOB convert DIC into organic carbon through a “sulfur oxidation-carbon fixation” coupling mechanism, overturning the conventional paradigm of petroleum-contaminated sites as perpetual carbon sources. The study fundamentally redefines natural attenuation frameworks by introducing microbial carbon sink potential as an essential assessment metric for environmental sustainability. Full article

In this study, we tested a flexible polyurethane (PU) foam, synthesized from bio-based components, for the removal of petroleum-derived fuels from water samples. The PU was synthesized via the prepolymer method through the reaction of PEG 400 with L-lysine ethyl ester diisocyanate (L-LDI), followed by chain extension with 2,5-bis(hydroxymethyl)furan (BHMF), a renewable platform molecule derived from carbohydrates. Freshwater and seawater samples were artificially contaminated with commercial diesel, gasoline, and kerosene. Batch adsorption experiments revealed that the total sorption capacity (S, g/g) of the PU was slightly higher for diesel in both water types, with values of 67 g/g in freshwater and 70 g/g in seawater. Sorption kinetic analysis indicated that the process follows a pseudo-second-order kinetic model, suggesting strong chemical interactions. Equilibrium data were fitted using Langmuir and Freundlich isotherm models, with the best fit achieved by the Langmuir model, supporting a monolayer adsorption mechanism on homogeneous surfaces. The PU foam can be regenerated up to 50 times by centrifugation, maintaining excellent performance. This study demonstrates a promising application of this sustainable and bio-based polyurethane foam for environmental remediation. Full article

Petroleum-contaminated soil is an increasingly severe environmental issue. The integration of phytoremediation and microbial remediation can effectively mitigate their individual limitations and enhance remediation efficiency. In this study, four newly isolated bacterial strains (including Cytobacillus and Rhodococcus) that exhibited preferential degradation of distinct petroleum components were combined with the rhamnolipid-producing strain Pseudomonas aeruginosa SL-1. The immobilization of this petroleum-degrading microbial consortium was performed by biochar adsorption and sodium alginate embedding, subsequently optimized using response surface methodology (0.75 g·L⁻¹ of biochar, 40 g·L⁻¹ of sodium alginate, and 40 g·L⁻¹ of calcium chloride). The results showed that the highest petroleum degradation rate (97.1%) of immobilized bacterial consortium was achieved at 72 h at a petroleum concentration of 5.0 g·L⁻¹. When combined with Sudan grass for soil bioremediation, the degradation rate reached 72.8% after 120 d for soil containing 5.0 g·kg⁻¹ of petroleum, higher than the results for the treatments with only immobilized bacterial consortium (53.0%) or Sudan grass (49.2%). Furthermore, significant improvements were observed for soil pH; nitrogen, phosphorus, and potassium contents; and urease, dehydrogenase, and catalase activities. Composite treatment also significantly increased the diversity and richness of the soil bacterial community and regulated its structure, function, and network composition. This study offers theoretical insights and potential practical applications for the enhanced bioremediation of petroleum-contaminated soils. Full article

Soil contamination with petroleum hydrocarbons is a serious environmental issue, necessitating the development of effective and environmentally friendly remediation methods that align with the principles of sustainable development. This study investigated the impact of selected biosurfactants on the efficiency of the biodegradation of total petroleum hydrocarbons (TPH) and polycyclic aromatic hydrocarbons (PAHs) in contaminated soil. Six biosurfactants—poly-γ-glutamic acid (γ-PGA), rhamnolipid, surfactin, a mixture of γ-PGA, rhamnolipids, and surfactin (PSR), as well as two commercial formulations (JBR 425 and JBR 320)—were evaluated in combination with a bacterial consortium. Biodegradation experiments were conducted under laboratory conditions for a 90-day period. The effectiveness of the tested biosurfactants was assessed using respirometric analysis, the chromatographic determination of the residual hydrocarbon content, and toxicity assays. The results showed that the application of a bacterial consortium enriched with a mixture of biosurfactants PSR (a biosurfactant concentration in the inoculating mixture: 5 g/dm³) was the most effective approach, resulting in an oxygen uptake of 5164.8 mgO₂/dm³ after 90 days, with TPH and PAH degradation rates of 77.3% and 70.32%, respectively. Phytotoxicity values decreased significantly, with TU values ranging from 6.32 to 4.62 (growth inhibition) and 3.77 to 4.13 (germination). Toxicity also decreased in the ostracodtoxkit test (TU = 4.35) and the Microtox SPT test (TU = 4.91). Among the tested biosurfactants, surfactin showed the least improvement in its bioremediation efficiency. Under the same concentration as in the PSR mixture, the oxygen uptake was 3446.7 mgO₂/dm³, with TPH and PAH degradation rates of 60.64% and 52.64%, respectively. In the system inoculated with the bacterial consortium alone (without biosurfactants), the biodegradation efficiency reached 44.35% for TPH and 36.97% for PAHs. The results demonstrate that biosurfactants can significantly enhance the biodegradation of petroleum hydrocarbons in soil, supporting their potential application in sustainable bioremediation strategies. Full article

Aquatic pollution in the Bay of Bengal has become a major environmental issue with long-term impacts on fisheries, biodiversity, and ecosystems. The review paper examines the major pathways, sources, and ecological consequences of aquatic pollution in the Bay of Bengal. Pollutants such as heavy metals, pesticides, petroleum hydrocarbons, and microplastics have been reported at concerning levels in the soil and water in aquatic ecosystems. Rivers act as key routes, transporting pollutants from inland sources to the Bay of Bengal. These contaminants disrupt metabolic and physiological functions in fish and other aquatic species and pose serious threats to food safety and public health through bioaccumulation. Harmful algal blooms (HABs), caused by nutrient enrichment, further exacerbate ecosystem degradation in the Bay of Bengal. The review highlights the immediate need for strengthened pollution control regulations, real-time water quality monitoring, sustainable farming practices, and community-based policy interventions to preserve biodiversity and safeguard fisheries. Full article

The Arabian Gulf, bordered by major energy-producing nations, harbors diverse microalgal communities with strong potential for the bioremediation of environmental pollutants, particularly petroleum hydrocarbons. This review evaluates two key microalgal groups—micro-green algae and dinoflagellates—highlighting their distinct physiological traits and ecological roles in pollution mitigation. Dinoflagellates, including Prorocentrum and Protoperidinium, have demonstrated hydrocarbon-degrading abilities but are frequently linked to harmful algal blooms (HABs), marine toxins, and bioluminescence, posing ecological and health risks. The toxins produced by these algae can be hemolytic or neurotoxic and include compounds such as azaspiracids, brevetoxins, ciguatoxins, okadaic acid, saxitoxins, and yessotoxins. In contrast, micro-green algae such as Oedogonium and Pandorina are generally non-toxic, seldom associated with HABs, and typically found in clean freshwater and brackish environments. Some species, like Chlorogonium, indicate pollution tolerance, while Dunaliella has shown promise in remediating contaminated seawater. Both groups exhibit unique enzymatic pathways and metabolic mechanisms for degrading hydrocarbons and remediating heavy metals. Due to their respective phycoremediation capacities and environmental adaptability, these algae offer sustainable, nature-based solutions for pollution control in coastal, estuarine, and inland freshwater systems, particularly in mainland Qatar. This review compares their remediation efficacy, ecological impacts, and practical limitations to support the selection of effective algal candidates for eco-friendly strategies targeting petroleum-contaminated marine environments. Full article

Petroleum-derived contaminants pose a significant threat to the soil microbiome. Therefore, it is essential to explore materials and techniques that can restore homeostasis in disturbed environments. The aim of the study was to assess the response of the soil microbiome to contamination with diesel oil (DO) and gasoline (G) and to determine the capacity of sorbents, vermiculite (V), dolomite (D), perlite (P) and agrobasalt (A), to enhance the activity of microorganisms under Zea mays cultivation conditions in pot experiments. The restoration and activity of the soil microbiome were evaluated based on the abundance and diversity of bacteria and fungi, using both classical microbiological methods and Next Generation Sequencing (NGS). Bioinformatic tools were employed to calculate the physicochemical properties of proteins. DO increased the abundance of cultured microorganisms, whereas G significantly reduced it. Both DO and G increased the number of ASVs of Proteobacteria and decreased the relative abundance of Gemmatimonadetes, Chloroflexi, Acidobacteria, Verrucomicrobia, Planctomycetes, and fungal OTUs. These contaminants stimulated the growth of bacteria from the genera Rhodanobacter, Sphingomonas, Burkholderia, Sphingobium, and Mycobacterium, as well as fungi belonging to the Penicillium genus. Conversely, they had a negative effect on Kaistobacter, Rhodoplanes, and Ralstonia, as well as the fungi Chaetomium, Pseudaleuria, and Mortierella. DO caused greater changes in microbial alpha diversity than G. The stability of microbial proteins was higher at 17 °C than at −1 °C. The most stable proteins were found in bacteria and fungi identified within the core soil microbiome. These organisms exhibited greater diversity and more compact RNA secondary structures. The application of sorbents to contaminated soil altered the composition of bacterial and fungal communities. All sorbents enhanced the growth of organotrophic bacteria (Org) and fungi (Fun) in DO-contaminated soils, and actinobacteria (Act) and fungi in G-contaminated soils. V and A had the most beneficial effects on cultured microorganisms. In DO-contaminated soils, all sorbents inhibited the growth of Rhodanobacter, Parvibaculum, Sphingomonas, and Burkholderia, while stimulating Salinibacterium and Penicillium. In G-contaminated but otherwise unamended soils, all sorbents negatively affected the growth of Burkholderia, Sphingomonas, Kaistobacter, Rhodoplanes, Pseudonocardia, and Ralstonia and increased the abundance of Gymnostellatospora. The results of this study provide a valuable foundation for developing effective strategies to remediate soils contaminated with petroleum-derived compounds. Full article

This work concerns the preparation of Pt/AC catalysts (Pt supported on activated carbon) and their application to the synthesis of hydrocarbon biofuels through the HEFA (hydroprocessing of esters and fatty acids) route. The key motivation for the work was that catalysts based on sulfided Mo supported on γ-Al₂O₃, traditionally employed in the hydroprocessing of petroleum derivatives, (i) are unstable in the HDO (hydrodeoxygenation) of biomass-derived feedstocks and (ii) can contaminate the resulting biofuels with sulfur. In this context, a systematic study on the effects of preparation conditions on the properties of the resulting Pt/AC catalysts and their performance in HEFA was carried out for the first time. Efficient catalysts were obtained, which led to the complete deoxygenation of lauric acid and coconut oil, yielding products composed primarily of n-alkanes. The highest HDO activity was verified for the catalyst prepared using as a support an AC previously subjected to thermal treatment up to 800 °C in a H₂ atmosphere (which removed most of the surface acidic oxygenated groups), depositing Pt over the surface of this support via wet impregnation using a H₂PtCl₆ solution acidified with HCl. The obtained results showed the great potential of the Pt/AC catalysts for the production of hydrocarbon biofuels through the HEFA route. Full article

Nitrate is a promising enhanced natural attenuation (ENA) material that enhances the microbial degradation of petroleum hydrocarbons by acting as an electron acceptor and nitrogen source. This study evaluated nitrate-containing materials (yeast extract, compound nitrogen fertilizer, and nitrate solutions) in microcosm experiments using gasoline-contaminated aquifer soils. Chemical analysis revealed that yeast extract achieved the highest degradation rate (34.33 mg/(kg·d)), reducing 600 mg/kg of petroleum hydrocarbons to undetectable levels within 18 days. Nitrate materials significantly increased nitrate-reducing activity and upregulated both aerobic/anaerobic hydrocarbon degradation genes, expanding microbial degradation potential. Metagenomic analysis identified Pseudomonas and Achromobacter as dominant genera across treatments, suggesting their critical roles in biodegradation. These findings demonstrate that nitrate-enhanced strategies effectively accelerate hydrocarbon attenuation under facultative anaerobic conditions, offering practical ENA solutions for petroleum-polluted sites. Full article

Groundwater sustains ecosystems, agriculture, and human consumption; therefore, its interaction with hydrocarbons is an important area of research under the umbrella of environmental science and resource exploration. Naturally occurring or anthropogenically introduced hydrocarbons can significantly impact groundwater through complex geochemical processes such as dissolution, adsorption, biodegradation, and redox reactions and can also affect groundwater chemistry in terms of pH, redox potential, dissolved organic carbon, and trace element concentrations. Accurate determination and identification of hydrocarbon contaminants requires advanced analytical methods like gas chromatography, GC–MS, and fluorescence spectroscopy, complemented with isotopic analysis and microbial tracers, which provide insights into sources of contamination and biodegradation pathways. The presence of hydrocarbons in groundwater is a matter of environmental concern but can also valuable data for petroleum exploration, tracing subsurface reservoirs and seepage pathways. This paper refers to the basic need for geochemical investigations combined with advanced detection techniques for successful regulation of thermal–mineral groundwater quality. This contributes towards successful sustainable hydrocarbon resource exploration and water resource conservation, with emphasis on the relationship between groundwater quality and hydrocarbon exploration. The study points out the significance of continuous observation of thermal mineral waters to identify their connection with the specific hydrocarbons of each study area. Full article

Shipyards are significant industrial sources of environmental pollution, releasing substantial amounts of heavy metals, petroleum hydrocarbons, and organic solvents into soil and groundwater during shipbuilding and maintenance operations. Such contamination not only affects the shipyard premises but also poses serious environmental threats to nearby communities, raising concerns about the long-term sustainability of the shipbuilding industry. Given the increasing global emphasis on sustainable industrial practices, addressing shipyard-related pollution has become a critical environmental challenge. This review aims to provide a comprehensive understanding of the pollution issues associated with shipyards and explore effective remediation strategies. It focuses on contamination in both soil and groundwater, and covers pollution generated throughout the shipbuilding and maintenance lifecycle. First, it examines previous studies to identify the major contaminants and pollution sources typically found at shipyard sites. Next, the paper reviews recent advances in soil and groundwater remediation technologies, including physical, chemical, and biological methods tailored to the unique challenges of shipyard environments. Finally, the review discusses current limitations in remediation practices and outlines potential directions for future research and technological development. Full article

Nicotine, a major alkaloid in tobacco, poses significant environmental risks due to its persistence in wastewater. This study explores the degradation of naturally extracted nicotine from tobacco leaves by the white-rot fungus Trametes versicolor, aiming to assess its biodegradation capacity under diverse environmental stressors. Nicotine was extracted using a NaOH–petroleum ether method and confirmed through Fourier-transform infrared (FTIR) and nuclear magnetic resonance (NMR) spectroscopy. Biodegradation experiments were conducted using potato dextrose broth and synthetic wastewater as growth media under varying pH (2.5 and 5.20) and temperatures (25 °C and 37 °C). Fungal growth and nicotine degradation were monitored through biomass quantification and NMR-based analysis. Optimal degradation occurred at 25 °C and pH 5.20, particularly in synthetic wastewater, suggesting enhanced fungal adaptation in complex media. Degradation efficiency ranged from 80% to 99%, with synthetic wastewater outperforming conventional media. Extreme conditions, such as pH 2.5 at 37 °C, significantly hindered fungal growth. These findings demonstrate T. versicolor’s potential for effective nicotine removal in wastewater and highlight the environmental parameters critical to its performance. This work supports the development of sustainable fungal-based bioremediation strategies for managing nicotine contamination in aquatic environments. Full article

The increasing global oil consumption has led to significant soil contamination by hydrocarbons, notably diesel-range hydrocarbons. Soil bioremediation through bacterial bioaugmentation is an alternative to increase the degradation of organic pollutants such as petroleum products. Bioremediation is a sustainable practice that contributes to the Sustainable Development Goals (SDGs) because it is environmentally friendly, reduces the impact of human activities, and avoids the use of invasive and destructive methods in soil restoration. This study examines the bioremediation potential of hydrocarbonoclastic bacteria isolated from soil close to areas with a risk of spills due to pipelines carrying hydrocarbons. Among the isolated strains, Arthrobacter globiformis, Pantoea agglomerans, and Nitratireductor soli exhibited hydrocarbonoclast activity, achieving diesel removal of up to 90% in short-chain alkanes and up to 60% in long-chain hydrocarbons. The results from in silico studies, which included molecular docking and molecular dynamics simulations, suggest that the diesel removal activity can be explained by the bioavailability of the linear alkanes and their affinity for alkane monooxygenase AlkB present in the studied microorganisms, since long-chain hydrocarbons had lower enzyme affinity and lower aqueous solubility. The correlation of the experimental results with the computational analysis allows for greater insight into the processes involved in the microbial degradation of hydrocarbons with varying chain lengths. Furthermore, this methodology establishes a cost-effective approximation tool for the evaluation of the feasibility of using different microorganisms in bioremediation processes. Full article

Considering the implications for the environment and human health, oil-contaminated soil generated in the petroleum industry requires treatment. Chemical cleaning represents an effective treatment approach for oil-contaminated soil and has attracted considerable attention. In this study, sodium d-gluconate (C₆H₁₁NaO₇), trisodium citrate (C₆H₅Na₃O₇), and L-arginine (C₆H₁₄N₄O₂) were employed as detergents to remove oil from oily sludge. The impacts of sludge (solid) concentration (C_S), types of detergents, temperature (T), and pH value on the deoiling efficiency (D_e) were systematically investigated. The results indicated that at a given detergent concentration (C_DG) and C_S, D_e followed the order C₆H₁₁NaO₇ > C₆H₅Na₃O₇ > C₆H₁₄N₄O₂. When C_S was 3.86 g·L⁻¹ and C_DG was 10.0 g·L⁻¹, sodium d-gluconate achieved a maximum D_e of approximately 85%. Additionally, at a fixed C_S, D_e decreased as the pH value increased, while it increased with increasing temperature. Interestingly, during the deoiling equilibrium, an obvious “solid effect” (or C_S−effect) was observed. The “solid effect” refers to the phenomenon where the oil distribution coefficient (K_D) changes with an increase in C_S. The observed C_S effect was described using the surface component activity (SCA) model. The values of the intrinsic distribution coefficient ($K_D^0$) and C_S−effect constant (γ), which are the model parameters of the SCA model, were derived from three detergent−sludge systems under different temperatures (T) and pH values. The strength of the C_S effect (or γ value) was found to be independent of detergent type and increased as T and pH value increased. This study broadens the application range of the SCA model and contributes to a deeper understanding of the adsorption and desorption behavior of oil droplets at the solid−liquid interface. Full article