Search Results (273)

In order to achieve the goals of carbon neutrality, large-scale storage of renewable energy sources has been integrated into the power grid. Under these circumstances, the power grid faces the challenge of peak shaving. Therefore, this paper proposes a coordinated variable-power control strategy for multiple battery energy storage stations (BESSs), improving the performance of peak shaving. Firstly, the strategy involves constructing an optimization model incorporating load forecasting, capacity constraints, and security indices to design a coordination mechanism tracking the target load band with the equivalent power. Secondly, it establishes a quantitative evaluation system using metrics such as peak–valley difference and load standard deviation. Comparison based on typical daily cases shows that, compared with the constant power strategy, the coordinated variable-power control strategy has a more obvious and comprehensive improvement in overall peak-shaving effects. Furthermore, it employs a “dynamic dispatch of multiple BESS” mode, effectively mitigating the risks and flexibility issues associated with single BESSs. This strategy provides a reliable new approach for large-scale energy storage to participate in high-precision peaking. Full article

In the context of urban decarbonization, multi-energy microgrids (MEMGs) are gaining increasing relevance due to their ability to enhance synergies across multiple energy vectors. This study presents a block-based MILP framework developed to optimize the operations of a real MEMG, with a particular focus on accurately modeling the structure of electricity and natural gas bills. The objective is to assess the added economic value of integrating a battery energy storage system (BESS) under the assumption it is employed to provide implicit flexibility—namely, bill management, energy arbitrage, and peak shaving. Results show that under assumed market conditions, tariff schemes, and BESS costs, none of the analyzed BESS configurations achieve a positive net present value. However, a 2 MW/4 MWh BESS yields a 3.8% reduction in annual operating costs compared to the base case without storage, driven by increased self-consumption (+2.8%), reduced thermal energy waste (–6.4%), and a substantial decrease in power-based electricity charges (–77.9%). The performed sensitivity analyses indicate that even with a significantly higher day-ahead market price spread, the BESS is not sufficiently incentivized to perform pure energy arbitrage and that the effectiveness of a time-of-use power-based tariff depends not only on the level of price differentiation but also on the BESS size. Overall, this study provides insights into the role of BESS in MEMGs and highlights the need for electricity bill designs that better reward the provision of implicit flexibility by storage systems. Full article

The integration of renewable energy into power grids is imperative for reducing carbon emissions and mitigating reliance on depleting fossil fuels. In this paper, we develop symmetric and asymmetric evolutionary game-theoretic models to analyze how user–grid cooperation in peak shaving can be enhanced by incorporating whole-process democracy (deliberative governance) into decision-making. Our framework captures excess returns, cooperation-driven profits, energy pricing, participation costs, and benefit-sharing coefficients to identify equilibrium conditions under varied subsidy, cost, and market scenarios. Furthermore, this study integrates the theory, path, and mechanism of deliberative procedures under the perspective of whole-process democracy, exploring how inclusive and participatory decision-making processes can enhance cooperation in renewable energy systems. We simulate seven scenarios that systematically adjust subsidy rates, cost–benefit structures, dynamic pricing, and renewable-versus-conventional competitiveness, revealing that robust cooperation emerges only under well-aligned incentives, equitable profit sharing, and targeted financial policies. These scenarios systematically vary these key parameters to assess the robustness of cooperative equilibria under diverse economic and policy conditions. Our findings indicate that policy efficacy hinges on deliberative stakeholder engagement, fair profit allocation, and adaptive subsidy mechanisms. These results furnish actionable guidelines for regulators and grid operators to foster sustainable, low-carbon energy systems and inform future research on demand response and multi-source integration. Full article

Modern utilities face unprecedented pressures as trends in digital transformation and democratized energy choice empower consumers to engage in peak shaving, flexible load management, and adopt grid automation and intelligence solutions. A powerful confluence of architectural, technological, and socio-economic forces is transforming the U.S. electricity market, triggering significant changes in electricity production, transmission, and consumption. Utilities are embracing digital twins and repurposed Utility 2.0 concepts—distributed energy resources, microgrids, innovative electricity market designs, real-time automated monitoring, smart meters, machine learning, artificial intelligence, and advanced data and predictive analytics—to foster operational flexibility and market efficiency. This analysis qualitatively evaluates how digitalization, Battery Energy Storage Systems (BESSs), and adaptive strategies to mitigate rebound effects collectively advance smart duck curve management. By leveraging digital platforms for real-time monitoring and predictive analytics, utilities can optimize energy flows and make data-driven decisions. BESS technologies capture surplus renewable energy during off-peak periods and discharge it when demand spikes, thereby smoothing grid fluctuations. This review explores the benefits of targeted digital transformation, BESSs, and managed rebound effects in mitigating the duck curve problem, ensuring that energy efficiency gains translate into actual savings. Furthermore, this integrated approach not only reduces energy wastage and lowers operational costs but also enhances grid resilience, establishing a robust framework for sustainable energy management in an evolving market landscape. Full article

This paper presents a practical framework for the design and real-time implementation of a Power Management System (PMS) for microgrids based on Supervisory Control Theory (SCT) for discrete-event systems. A detailed step-by-step methodology is provided, which covers the entire process from defining discrete events, modeling microgrid components, synthesizing supervisory controllers, and realizing them in MATLAB (R2024b) Stateflow. This methodology is applied to a case study, where a decentralized supervisor controller is designed for a microgrid containing a Battery Energy Storage System (BESS), a generator set (Genset), a wind and a solar generation system, critical loads, and noncritical loads. Unlike previous works based on SCT, the proposed PMS addresses the following functionalities: $\left(i\right)$ grid-connected and islanded operation; $\left(ii\right)$ peak shaving; $\left(iii\right)$ voltage support; $\left(iv\right)$ load shedding. Finally, a CHIL testing is employed to validate the synthesized SCT-based PMS. Full article

Against the backdrop of the increasing penetration rate of new energy year by year, power systems face a continuously growing demand for flexibility. Under the structure of such a new power system, it is essential not only to introduce diverse flexible power sources but also to explore the flexible regulation capabilities of existing conventional power sources. To fully utilize the flexibility of thermal power units (TPUs), this study proposes a real-time optimal scheduling strategy for a wind–thermal energy-storage integrated system with an adaptive time division and variable objectives. Based on the evaluation results of the real-time flexible supply–demand relationship within a regional power grid, the operation modes of TPUs are categorized into three types: economic mode, peak shaving mode, and coordination mode. For each operation mode, corresponding optimization objectives are defined, and an energy storage control strategy is developed to assist in the peak shaving of TPUs. While effectively harnessing the flexibility of TPUs, the proposed method reduces both the frequency and capacity of TPUs entering deep peak shaving. Using data from a province in Northwest China as a case study, simulation calculations and analyses demonstrate that the proposed method increases renewable energy consumption by 314.37 MWh while decreasing system economic benefits by CNY 129,000. Compared with traditional scheduling methods for TPUs to accommodate renewable energy, the system benefit increases by CNY 297,000, and an additional 13.53 MWh of peak wind power is accommodated. These results confirm that the proposed scheduling strategy can significantly enhance the system’s ability to integrate new energy while maintaining its economic efficiency. Full article

In the context of the “double carbon” goals and energy transformation, the integration of energy and transportation has emerged as a crucial trend in their coordinated development. Wind power prediction serves as the cornerstone technology for ensuring efficient operations within this integrated framework. This paper introduces a wind power prediction methodology based on an NGBoost–GRU fusion model and devises an innovative dynamic charging optimization strategy for electric vehicles (EVs) through deep collaboration. By integrating the dynamic feature extraction capabilities of GRU for time series data with the strengths of NGBoost in modeling nonlinear relationships and quantifying uncertainties, the proposed approach achieves enhanced performance. Specifically, the dual GRU fusion strategy effectively mitigates error accumulation and leverages spatial clustering to boost data homogeneity. These advancements collectively lead to a significant improvement in the prediction accuracy and reliability of wind power generation. Experiments on the dataset of a wind farm in Gansu Province demonstrate that the model achieves excellent performance, with an RMSE of 36.09 kW and an MAE of 29.96 kW at the 12 h prediction horizon. Based on this predictive capability, a “wind-power-charging collaborative optimization framework” is developed. This framework not only significantly enhances the local consumption rate of wind power but also effectively cuts users’ charging costs by approximately 18.7%, achieving a peak-shaving effect on grid load. As a result, it substantially improves the economic efficiency and stability of system operation. Overall, this study offers novel insights and robust support for optimizing the operation of integrated energy systems. Full article

The natural gas pipeline network transmission system involved in the coordinated operation of pipeline networks and gas-fired power generation facilities is complex. It consists of multiple components, such as gas sources, users, valves, compressor stations, and pipelines. The addition of natural gas-fired power generation facilities overlaps with the high and low peak periods of civil gas, imposing dual peak-shaving pressures on pipeline networks and requiring more stringent operational control strategies for maintaining system stability. To address the aforementioned issues and improve the overall operating revenues of the system, we proposed the coordinated optimization model of gas-fired power generation facilities, pipeline networks, gas storage, and compressor stations. The optimization algorithm is written using the penalty function method of the Interior Point OPTimizer (IPOPT) solver. Meanwhile, the basic parameters of the system’s pipeline networks, users, gas storage, natural gas-fired power generation facilities, compressors, and electricity prices were input into the solver. The research results reveal that the algorithm ensures solution accuracy while accounting for computational efficiency and practical applicability. The algorithm can be used to effectively calculate the ideal coordinated operation solution, significantly improve the operating revenues of the system, and achieve safe, stable, coordinated, and efficient operation of the system. Full article

To enhance the operational stability of distribution networks during peak periods, this paper proposes a multi-timescale operational method considering load forecasting impacts. Firstly, the Crested Porcupine Optimizer (CPO) is employed to optimize the hyperparameters of long short-term memory (LSTM) networks for an accurate prediction of the next-day load curves. Building on this foundation, a multi-timescale optimization strategy is developed: During the day-ahead operation phase, a conservation voltage reduction (CVR)-based regulation plan is formulated to coordinate the control of on-load tap changers (OLTCs) and distributed resources, alleviating peak-shaving pressure on the upstream grid. In the intraday optimization phase, real-time adjustments of OLTC tap positions are implemented to address potential voltage violations, accompanied by an electrical distance-based control strategy for flexible adjustable resources, enabling rapid voltage recovery and enhancing system stability and robustness. Finally, a modified IEEE-33 node system is adopted to verify the effectiveness of the proposed multi-timescale operational method. The method demonstrates a load forecasting accuracy of 93.22%, achieves a reduction of 1.906% in load power demand, and enables timely voltage regulation during intraday limit violations, effectively maintaining grid operational stability. Full article

The integration of battery energy storage systems (BESSs) within active distribution networks (ADNs) entails optimized day-ahead charge/discharge scheduling to achieve effective peak shaving.The primary objective is to reduce peak demand and mitigate power deviations caused by intermittent photovoltaic (PV) output. Quasi-static time-series (QSTS) co-simulations for determining optimal heuristic solutions at each time interval are computationally intensive, particularly for large-scale systems. To address this, a two-stage intelligent BESS scheduling approach implemented in a MATLAB–OpenDSS environment with parallel processing is proposed in this paper. In the first stage, a rule-based decision tree generates initial charge/discharge setpoints for community BESS units. These setpoints are refined in the second stage using an optimization algorithm aimed at minimizing community net load power deviations and reducing peak demand. By assigning each ADN community to a dedicated CPU core, the proposed approach utilizes parallel processing to significantly reduce the execution time. Performance evaluations on an IEEE 8500-node test feeder demonstrate that the approach enhances peak shaving while reducing QSTS co-simulation execution time, utility peak demand, distribution network losses, and point of interconnection (POI) nodal voltage deviations. In addition, the use of smart inverter functions improves BESS operations by mitigating voltage violations and active power curtailment, thereby increasing the amount of energy shaved during peak demand periods. Full article

In the context of growing global energy demand and increasingly severe environmental pollution, ensuring the stable dispatch of new energy sources and the effective management of power resources has become particularly important. This study focuses on the reliability and stability issues of new energy dispatch considering the complementary advantages of multiple energy types. It aims to enhance dispatch stability and energy utilization through an innovative Distributed Overlapping Coalition Formation (DOCF) model. A distributed algorithm utilizing tabu search is proposed to solve the complex optimization problem in power resource allocation. The overlapping coalitions consider synergies between different types of resources and intelligently allocate based on the heterogeneous demands of power loads and the supply capabilities of power stations. Simulation results demonstrate that DOCF can significantly improve power grid resource utilization efficiency and dispatch stability. Particularly in handling intermittent power resources such as solar and wind energy, the proposed model effectively reduces peak shaving time and improves the overall network energy efficiency. Compared with the preference relationship based on selfish and Pareto sequence, the PGG-TS algorithm based on BMBT has an average utility of 10.2% and 25.3% in terms of load, respectively. The methodology and findings of this study have important theoretical and practical value for guiding actual energy management practices and promoting the wider utilization of renewable energy. Full article

With the increase of natural gas consumption year by year, the shortage of urban natural gas reserves leads to the increasingly serious gas supply–demand imbalance. It is particularly important to establish a correct and reasonable gas daily load forecasting model to ensure the realization of forecasting function and the accuracy and reliability of calculation results. Most of the current prediction models are combined with the characteristics of gas data and prediction models, and the influencing factors are often considered less. In order to solve this problem, the basic concept of multiple weather parameter (MWP) was introduced, and the influence of factors such as the average temperature, solar radiation, cumulative temperature, wind power, and temperature change of the building foundation on the daily load of urban gas were analyzed. A multiple weather parameter–daily load prediction (MWP-DLP) model based on System Thermal Days (STD) was established, and the genetic algorithm was used to solve the model. The daily gas load in a city was predicted, and the results were analyzed. The results show that the trend between the predicted value of gas daily load obtained by the MWP-DLP model and the actual value was basically consistent. The maximum relative error was 8.2%, and the mean absolute percentage error (MAPE) was 2.68%. The feasibility of the MWP- DLP prediction model was verified, which has practical significance for gas companies to reasonably formulate and decide peak shaving schemes to reserve natural gas. Full article

To achieve low-carbon economic dispatch and collaborative optimization of carbon capture efficiency in power systems, this paper proposes a flexible carbon capture power plant and generalized energy storage collaborative operation model under a dynamic carbon quota mechanism. First, adjustable carbon capture devices are integrated into high-emission thermal power units to construct carbon–electricity coupled operation modules, enabling a dynamic reduction of carbon emission intensity and enhancing low-carbon performance. Second, a time-varying carbon quota allocation mechanism and a dynamic correction model for carbon emission factors are designed to improve the regulation capability of carbon capture units during peak demand periods. Furthermore, pumped storage systems and price-guided demand response are integrated to form a generalized energy storage system, establishing a “source–load–storage” coordinated peak-shaving framework that alleviates the regulation burden on carbon capture units. Finally, a multi-timescale optimization scheduling model is developed and solved using the GUROBI algorithm to ensure the economic efficiency and operational synergy of system resources. Simulation results demonstrate that, compared with the traditional static quota mode, the proposed dynamic carbon quota mechanism reduces wind curtailment cost by 9.6%, the loss of load cost by 48.8%, and carbon emission cost by 15%. Moreover, the inclusion of generalized energy storage—including pumped storage and demand response—further decreases coal consumption cost by 9% and carbon emission cost by 17%, validating the effectiveness of the proposed approach in achieving both economic and environmental benefits. Full article

With the expansion of the scale of high-proportion wind and solar power grid connections, the problems of abandoned wind and solar power and insufficient peak shaving have become increasingly prominent. The electric–hydrogen coupling system has greater potential in flexible regulation, providing a new technological approach for the consumption of new energy. This paper proposes a two-layer optimization model for an electricity–hydrogen coupled distributed power generation system. The model is based on the collaborative regulation of flexible loads by electrolytic cells and fuel cells. Through the collaborative optimization of capacity configuration and operation scheduling, it breaks through the strong dependence of traditional systems on the distribution network and enhances the autonomous consumption capacity of new energy. The upper-level optimization model aims to minimize the total life-cycle cost of the system, and the lower-level optimization model aims to minimize the system’s operating cost. The capacity configuration of each module before and after the integration of flexible loads is compared. The simulation results show that the integration of flexible loads can not only effectively reduce the level of wind and solar power consumption in distributed power generation systems, but also play a role in load peak shaving and valley filling. At the same time, it can effectively reduce the system’s peak electricity purchase and sale cost and reduce the system’s dependence on the distribution network. Based on this, with the premise of meeting the load demand, the capacity configuration results of each module were compared when connecting electrolytic cells of different capacities. The results show that the simulated area has the best economic benefits when connected to a 4 MW electrolytic cell. This optimization model can increase the high wind and solar power consumption rate by 23%, reduce the peak purchase and sale cost of electricity by 40%, and achieve an economic benefit coefficient of up to 0.097. Full article

In the age of widespread renewable energy integration, coal-fired power plants are transitioning from a primary baseload role to a more flexible peak-shaving capacity. Under frequent load changes, the thermal efficiency will significantly decrease. In order to achieve efficient dynamic operation, this study proposes a comprehensive mechanical model of a 300 MW drum-type boiler. Based on the Modelica/DYMOLA platform, the multi-domain equations describing energy and mass balance are programmed and solved. A comprehensive evaluation of the energy transformation within the boiler’s heat exchange components was performed. Utilizing the principles of exergy analysis, this study investigates how fluctuating operational conditions impact the energy dynamics and exergy losses in the drum and heating surfaces. Steady-state simulation reveals that the evaporator and superheater units account for 81.3% of total exergy destruction. Dynamic process analysis shows that the thermal inertia induced by the drum wall results in a significant delay in heat transfer quantity, with a dynamic period of up to 5000 s. The water wall exhibits the highest total dynamic exergy destruction at 9.5 GJ, with a destruction rate of 7.9–8.5 times higher than other components. Full article