Search Results (75)

Background: The emergence and spread of antimicrobial-resistant bacteria (ARB) has become an urgent global concern as a silent pandemic. When taking measures to reduce the impact of antimicrobial resistance (AMR) on the environment, it is important to consider appropriate treatment of wastewater from medical facilities. Methods: In this study, a continuous-flow wastewater treatment system using ozone and ultraviolet light, which has excellent inactivation effects, was implemented in a hospital in an urban area of Japan. Results: The results showed that 99% (2 log₁₀) of Gram-negative rods and more than 99.99% (>99.99%) of ARB comprising ESBL-producing Enterobacterales were reduced by ozone treatment from the first day after treatment, and ultraviolet light-emitting diode (UV-LED) irradiation after ozone treatment; UV-LED irradiation after ozonation further inactivated the bacteria to below the detection limit. Inactivation effects were maintained throughout the treatment period in this study. Metagenomic analysis showed that the removal of these microorganisms at the DNA level tended to be gradual in ozone treatment; however, the treated water after ozone/UV-LED treatment showed a 2 log₁₀ (>99%) removal rate at the end of the treatment. The residual antimicrobials in the effluent were benzylpenicillin, cefpodoxime, ciprofloxacin, levofloxacin, azithromycin, clarithromycin, doxycycline, minocycline, and vancomycin, which were removed by ozone treatment on day 1. In contrast, the removal of ampicillin and cefdinir ranged from 19% to 64% even when combined with UV-LED treatment. Conclusions: Our findings will help to reduce the discharge of ARB and antimicrobials into rivers and maintain the safety of aquatic environments. Full article

This study presents a photoresist-free patterning method for solution-processed indium zinc oxide (IZO) thin films using two photochemical exposure techniques, namely pulsed ultraviolet (UV) light and UV-ozone, and a plasma-based method using oxygen (O₂) plasma. Pulsed UV light delivers short, high-intensity flashes of light that induce localised photochemical reactions with minimal thermal damage, whereas UV-ozone enables smooth and uniform surface oxidation through continuous low-pressure UV irradiation combined with in situ ozone generation. By contrast, O₂ plasma generates ionised oxygen species via radio frequency (RF) discharge, allowing rapid surface activation, although surface damage may occur because of energetic ion bombardment. All three approaches enabled pattern formation without the use of conventional photolithography or chemical developers, and the UV-ozone method produced the most uniform and clearly defined patterns. The patterned IZO films were applied as active layers in bottom-gate top-contact thin-film transistors, all of which exhibited functional operation, with the UV-ozone-patterned devices exhibiting the most favourable electrical performance. This comparative study demonstrates the potential of photochemical and plasma-assisted approaches as eco-friendly and scalable strategies for next-generation IZO patterning in electronic device applications. Full article

Bioaerosol particles contribute to the reduced indoor air quality and cause various health issues, thus their concentration must be managed. Air cleaning is one of the most viable technological options for reducing quantities of indoor air contaminants. This study assesses the effectiveness of a prototype multi-stage air cleaner in reducing bioaerosol particle viability and concentrations. The single-pass type unit consisted of non-thermal plasma (NTP), ultraviolet-C (UV-C) irradiation, bipolar ionization (BI), and electrostatic precipitation (ESP) stages. The device was tested under controlled laboratory conditions using Escherichia coli (Gram-negative) and Lactobacillus casei (Gram-positive) bacteria aerosol at varying airflow rates (50–600 m³/h). The device achieved over 99% inactivation efficiency for both bacterial strains at the lowest airflow rate (50 m³/h). Efficiency declined with increasing airflow rates but remained above 94% at the highest flow rate (600 m³/h). Among the individual stages, NTP demonstrated the highest standalone inactivation efficiency, followed by UV-C and BI. The ESP stage effectively captured inactivated bioaerosol particles, preventing re-emission, while an integrated ozone decomposition unit maintained ozone concentrations below safety thresholds. These findings show the potential of multi-stage air cleaning technology for reducing bioaerosol contamination in indoor environments, with applications in healthcare, public spaces, and residential settings. Full article

The broadband spectrum of solar radiation is commonly characterized by indices such as the average photon energy (APE) and the blue fraction (BF). This work explores the effectiveness of the two indices in a narrower spectral band, namely the ultraviolet (UV). The analysis is carried out from two perspectives: sensitivity to the changes in the UV spectrum and the uniqueness (each index value uniquely characterizes a single UV spectrum). The evaluation is performed in relation to the changes in spectrum induced by the main atmospheric attenuators in the UV band: ozone and aerosols. Synthetic UV spectra are generated in different atmospheric conditions using the SMARTS2 spectral solar irradiance model. The closing result is a new index for the signature of the solar UV radiation spectrum. The index is conceptually just like the BF, but it captures the specificity of the UV spectrum, being defined as the fraction of the energy of solar UV radiation held by the UV-B band. Therefore, this study gives a new meaning and a new utility to the common UV-B/UV ratio. Full article

The application of oxidation processes, including advanced oxidation, in water treatment is one of the effective methods for eliminating risks associated with the presence of organic substances in water and those formed during chlorination. This article presents the impact of advanced oxidation in the UV + O₃ process on the content and structure of organic substances present in three natural waters with different levels of total organic carbon (TOC). The process was carried out using low-pressure and medium-pressure lamps with an irradiation time of 40 min and ozone doses of 1.5 gO₃/m³ and 5 gO₃/m³. Advanced oxidation, regardless of the type of lamp used or the ozone dose, had the greatest effect on the content of humic acids, which underwent both transformation and mineralization. The use of a low-pressure lamp resulted in an increase in the content of organic substances with the lowest molecular weight (<0.7 kDa), whereas the medium-pressure lamp led to an increase in substances with a molecular weight >1.3 kDa. Regardless of the ozone dose and the type of lamp used, the transformation of organic substances dominated over mineralization, whose efficiency reached a maximum of 44.9% and 38.4% for the low-pressure and medium-pressure lamps, respectively. The degree of organic substance transformation and the efficiency of their removal were directly proportional to the TOC content in the raw water. The use of a low-pressure UV lamp ensured higher process efficiency, which is also associated with lower energy costs. Full article

Ultraviolet (UV) radiation effects on Earth’s ecosystems on a global scale can be assessed on a basis of satellite estimates of hyperspectral irradiance on the surface and in ocean waters and the spectral biological weighting functions. The satellite UV surface irradiance algorithms combine satellite retrievals of extraterrestrial solar irradiance, cloud/surface reflectivity, aerosol optical depth, and total column ozone with radiative transfer computations. The assessment of in-water irradiance requires additional information on inherent optical properties (IOPs) of ocean water. Our Ozone Monitoring Instrument (OMI) surface hyperspectral irradiance algorithm is updated by implementing a new absorbing aerosol correction based on OMI daily retrievals of UV aerosol absorption optical depth (AAOD). To provide insight into the temporal and spatial variability of absorbing aerosols, we consider a monthly global AAOD climatology derived from the OMI UV aerosol algorithm. Hyperspectral underwater irradiance is computed using Hydrolight radiative transfer calculations along with a Case I water model of IOPs extended into UV. Both planar and scalar irradiances are computed on the Earth’s surface and propagated underwater. The output surface products include the UV index. The output underwater products include the hyperspectral diffuse attenuation coefficients of the planar and scalar irradiances. Effects of the seasonal variability of AAOD on the UV index and the deoxyribonucleic acid (DNA) damage dose rates are considered. The reduction in the UV index and DNA damage dose rate due to the presence of absorbing aerosols can be as large as 30–40%. Full article

The depletion of the ozone layer has resulted in elevated ultraviolet-B (UV-B) radiation levels, posing a significant risk to terrestrial plant growth. Rhododendron chrysanthum Pall. (R. chrysanthum), adapted to high-altitude and high-irradiation environments, has developed unique adaptive mechanisms. This study exposed R. chrysanthum to UV-B radiation for two days, with an 8 h daily treatment, utilizing metabolomic and transcriptomic analyses to explore the role of WRKY transcription factors in the plant’s UV-B stress response and their regulation of flavonoid synthesis. UV-B stress resulted in a significant decrease in rETR and Ik and a significant increase in 1-qP. These chlorophyll fluorescence parameters indicate that UV-B stress impaired photosynthesis in R. chrysanthum. Faced with the detrimental impact of UV-B radiation, R. chrysanthum is capable of mitigating its effects by modulating its flavonoid biosynthetic pathways to adapt positively to the stress. This study revealed changes in the expression of 113 flavonoid-related metabolites and 42 associated genes, with WRKY transcription factors showing significant correlation with these alterations. WRKY transcription factors can influence the expression of key enzyme genes in the flavonoid metabolic pathway, thereby affecting metabolite production. A theoretical reference for investigating plant stress physiology is provided in this work, which also offers insights into the stress responses of alpine plants under adverse conditions. Full article

A machine learning algorithm combined with measurements obtained by a NILU-UV irradiance meter enables the determination of total ozone column (TOC) amount and cloud optical depth (COD). In the New York City area, a NILU-UV instrument on the rooftop of a Stevens Institute of Technology building (40.74° N, −74.03° E) has been used to collect data for several years. Inspired by a previous study [Opt. Express 22, 19595 (2014)], this research presents an updated neural-network-based method for TOC and COD retrievals. This method provides reliable results under heavy cloud conditions, and a convenient algorithm for the simultaneous retrieval of TOC and COD values. The TOC values are presented for 2014–2023, and both were compared with results obtained using the look-up table (LUT) method and measurements by the Ozone Monitoring Instrument (OMI), deployed on NASA’s AURA satellite. COD results are also provided. Full article

Textural softening is a major factor that limits the storage potential of fruit. Fresh produce markets incur severe financial losses due to excessive fruit softening. The application of preservation strategies aimed at mitigating fruit softening is crucial for optimising the marketability of fruit. Proposed preservation strategies include ecofriendly treatments, namely, hexanal, edible coatings, heat treatments, ozone and UV-C irradiation. These treatments optimise firmness retention by targeting the factors that affect fruit softening, such as ethylene, respiration rates, enzymes and pathogens. This review discusses the mechanisms by which ecofriendly treatments inhibit fruit softening, providing insights into their effect on ethylene biosynthesis, cell wall metabolism and disease resistance. Although ecofriendly treatments offer a promising and sustainable approach for delaying fruit softening, the optimisation of treatment application protocols is needed to improve their efficacy in retaining fruit firmness. Studies reporting on the molecular mechanisms by which ecofriendly treatments inhibit fruit softening are limited. Future studies should prioritise proteomic and transcriptome analyses to advance our understanding of the underlying molecular mechanisms by which ecofriendly treatments delay the fruit-softening process. Full article

Reactions of bis(benzene)chromium (Bz₂Cr) and ozone (O₃) were studied using low-temperature argon matrix-isolation infrared spectroscopy with supporting DFT calculations. When Bz₂Cr and O₃ were co-deposited, they reacted upon matrix deposition to produce two new prominent peaks in the infrared spectrum at $431 {\mathrm{c}\mathrm{m}}^{-1}$ and $792 {\mathrm{c}\mathrm{m}}^{-1}$. These peaks increased upon annealing the matrix to 35 K and decreased upon UV irradiation at λ = 254 nm. The oxygen-18 and mixed oxygen-16,18 isotopic shift pattern of the peak at $792 {\mathrm{c}\mathrm{m}}^{-1}$ is consistent with the antisymmetric stretch of a symmetric ozonide species. DFT calculations of many possible ozonide products of this reaction were made. The formation of a hydrogen ozonide (H₂O₃) best fits the original peaks and the oxygen-18 isotope shift pattern. Energy considerations lead to the conclusion that the chromium-containing product of this reaction is the coupled product benzene-chromium-biphenyl-chromium-benzene (BzCrBPCrBz). $2{\mathrm{B}\mathrm{z}}_2\mathrm{C}\mathrm{r}+{\mathrm{O}}_3\to {\mathrm{H}}_2{\mathrm{O}}_3+\mathrm{B}\mathrm{z}\mathrm{C}\mathrm{r}\mathrm{B}\mathrm{P}\mathrm{C}\mathrm{r}\mathrm{B}\mathrm{z}, {∆E}_{calc}=-52.13\mathrm{k}\mathrm{c}\mathrm{a}\mathrm{l}/\mathrm{m}\mathrm{o}\mathrm{l}$. Full article

Reducing the initial bacteria number from meat and extending its shelf life are crucial factors for ensuring product safety and enhancing economic benefits for enterprises. Currently, controlling enzyme activity and the microbial survival environment is a common approach to reducing the rate of deterioration in raw meat materials, thereby achieving the goal of bacteria reduction during storage and preservation. This review summarizes the commonly used technologies for reducing bacteria in meat, including slightly acidic electrolyzed water (SAEW), organic acids, ozone (O₃), ultrasound, irradiation, ultraviolet (UV), cold plasma, high-pressure processing (HPP), and biological bacterial reduction agents. This review outlines the mechanisms and main features of these technologies for reducing bacteria in meat processing. Additionally, it discusses the status of these technologies in meat storage and preservation applications while analyzing associated problems and proposing solutions. The aim is to provide valuable references for research on meat preservation technology. Full article

Ozonation and UV irradiation are promising sustainable methods for extending the shelf life of stored fruits. The aim of this research was to evaluate the effectiveness of the constructed system, enabling simultaneous ozonation and UV-C irradiation of cranberry fruits in extending their shelf life. The effectiveness of this solution was determined by analyzing the properties of fruits subjected to the processes. The impact of these processes on the shelf life of fruits was assessed during 42 days of storage at a temperature of 8 °C and 80% humidity. It was demonstrated that applying the ozonation process to fruits, as facilitated by the developed solution’s throughput, led to a reduction in microbiological load (fermentation bacteria count reduction by 3.4 log cfu⁻¹), resulting in an extension of their shelf life and a reduction in storage losses (8.98% by mass). The implementation of the developed solution, by reducing water loss and limiting fruit losses (approximately 5% less compared to the control group) during storage, contributes to tangible benefits for the producers and distributors of these fruits. The proposed modification has a positive environmental effect by reducing waste and makes the cultivation of cranberries more sustainable and environmentally friendly. Full article

In this study, we present comprehensive climatologies of effective ultraviolet (UV) quantities and photosynthetically active radiation (PAR) over Cyprus for the period 2004 to 2023, leveraging the synergy of earth observation (EO) data and radiative transfer model simulations. The EO dataset, encompassing satellite and reanalysis data for aerosols, total ozone column, and water vapor, alongside cloud modification factors, captures the nuanced dynamics of Cyprus’s atmospheric conditions. With a temporal resolution of 15 min and a spatial of 0.05° × 0.05°, these climatologies undergo rigorous validation against established satellite datasets and are further evaluated through comparisons with ground-based global horizontal irradiance measurements provided by the Meteorological Office of Cyprus. This dual-method validation approach not only underscores the models’ accuracy but also highlights its proficiency in capturing intra-daily cloud coverage variations. Our analysis extends to investigating the long-term trends of these solar radiation quantities, examining their interplay with changes in cloud attenuation, aerosol optical depth (AOD), and total ozone column (TOC). Significant decreasing trends in the noon ultraviolet index (UVI), ranging from −2 to −4% per decade, have been found in autumn, especially marked in the island’s northeastern part, mainly originating from the (significant) positive trends in TOC. The significant decreasing trends in TOC, of −2 to −3% per decade, which were found in spring, do not result in correspondingly significant positive trends in the noon UVI since variations in cloudiness and aerosols also have a strong impact on the UVI in this season. The seasonal trends in the day light integral (DLI) were generally not significant. These insights provide a valuable foundation for further studies aimed at developing public health strategies and enhancing agricultural productivity, highlighting the critical importance of accurate and high-resolution climatological data. Full article

Micropollutants belong to various groups of chemicals. One of the most diverse and large group of them are pharmaceuticals. The presence of pharmaceutical residues in wastewater poses a significant challenge to water quality and environmental health. This paper provides an overview of recent advancements in the removal of pharmaceuticals from water, focusing on various treatment processes and their effectiveness in eliminating micropollutants. Through a review of the literature, including studies on ozonation, UV irradiation, sulfate radical-based technologies, and photocatalytic processes, insights into degradation mechanisms and optimal conditions for their removal are synthesized. Additionally, with new legislation mandating the monitoring of selected micropollutants and the implementation of quaternary treatment in wastewater treatment plants, the paper discusses prospects for future research and recommendations for effective pharmaceutical removal. Key actions include conducting comprehensive laboratory and pilot trials, implementing quaternary treatment of wastewater, continuously monitoring water quality, investing in research and development, and promoting collaboration and knowledge sharing among stakeholders. By embracing these strategies, we can work towards safeguarding water resources and protecting public health from the adverse effects of pharmaceutical contamination. Full article

A large variety of pharmaceutical compounds have recently been detected in wastewater and natural water systems. This review highlighted the significance of removing pharmaceutical compounds, which are considered indispensable emerging contaminants, from wastewater and natural water systems. Various advanced oxidation processes (AOPs), including UV-H₂O₂, Fenton and photo-Fenton, ozone-based processes, photocatalysis, and physical processes, such as sonolysis, microwave, and electron beam irradiation, which are regarded as the most viable methods to eliminate different categories of pharmaceutical compounds, are discussed. All these AOPs exhibit great promising techniques, and the catalytic degradation process of the emerging contaminants, advantages, and disadvantages of each technique were deliberated. Heterogeneous photocatalysis employing metal oxides, particularly anatase TiO₂ nanoparticles as catalysts activated by UV light irradiation, was reviewed in terms of the electron–hole separation, migration of the charge carriers to the catalyst surfaces, and redox potential of the charge carriers. This brief overview also emphasized that anatase TiO₂ nanoparticles and TiO₂-based nanomaterials are promising photocatalysts, and a combination of photocatalysis and other AOPs enhanced photocatalytic degradation efficiency. Finally, the challenges of applying anatase TiO₂-based photocatalysis in environmental remediation and wastewater treatments to degrade pharmaceutical compounds, including mass spectroscopic analysis and a biological activity test of by-products of the emerging contaminants resulting from photocatalysis, are summarized. Full article