Search Results (4,721)

In this research project a large linear electromagnetic actuator (LLEA) was designed and manufactured. The electromagnetic performance was published in previous works, but in this paper we focus on the technological challenges related to the manufacturing in particular. This LLEA was based on the magnet-free switched-reluctance principle, having six effective energised stator “teeth” and four passive mover parts (4:6 ratio). Various aspects and challenges encountered during the manufacturing, transport, and assembly are discussed. Thermal expansion of steel contributed to the decision of the modular design, with each module having 1.3 m in length, with a 2 mm longitudinal dilatation gap. The initial prototype was tested with a 10.6 m length, with plans to extend the test track to 60 m, which was fully achievable due to the modular design and required 29 tons of electrical steel to be built. The stator laminations were cut by a bespoke progressive tool with stamping, and other parts by a CO₂ laser. Mounting was based on welding (back of the stator) and clamping plates (through insulated bolts). The linear longitudinal force was on the order of 8 kN, with the main air gap of 7.5–10 mm on either side of the mover. The lateral forces could exceed 40 kN and were supported by appropriate construction steel members bolted to the concrete floor. The overall mechanical tolerances after installation remained below 0.5 mm. The technology used for constructing this prototype demonstrated the cost-effective way for a semi-industrial manufacturing scale. Full article

The overall efficiency of combining denitrification and volatile organic compound (VOC) removal through selective catalytic reduction (SCR) technology is currently mainly limited by the VOC removal aspect. However, existing studies have not studied the microscopic mechanism of the interaction between VOCs and catalysts, failing to provide a theoretical basis for catalysts. Therefore, this work explored the interaction mechanisms between SCR catalysts doped with different additives and typical VOCs (acetone and toluene) in flue gas based on density functional theory (DFT) calculations. The results showed that the VNi-TiO₂ surface exhibited a high adsorption energy of −0.80 eV for acetone and a high adsorption energy of −1.02 eV for toluene on the VMn-TiO₂ surface. Electronic structure analysis revealed the VMn-TiO₂ and VNi-TiO₂ surfaces exhibited more intense orbital hybridization with acetone and toluene, promoting charge transfer between the two and resulting in stronger interactions. The analysis of temperature on adsorption free energy showed that VMn-TiO₂ and VNi-TiO₂ still maintained high activity at high temperatures. This work contributes to clarifying the interaction mechanism between SCR and VOCs and enhancing the VOC removal efficiency. Full article

This study evaluates the influence of fiber type, geometry, and interfacial behavior on the physical and mechanical performance of cementitious composites reinforced with recycled pulp from beverage cartons (RPBC), bamboo fiber (BF), and eucalyptus fiber (EF) as the sole reinforcing agents. The BF was rounded in shape and had the highest aspect ratio, while the ribbon-shaped EF exhibited the highest tensile strength index. The RPBC fibers were fibrillated and the shortest, with a ribbon shape. Flexural strength results showed that RPBCC achieved a maximum strength that was 47.6% higher than the control specimen (0% fiber), outperforming both BF- and EF-reinforced counterparts. This superior performance is attributed to the higher fibrillation level of the ribbon-shaped RPBC fibers, which promoted better fiber–matrix bonding. As the fiber content increased, the bulk density of EFC and BFC decreased linearly, while RPBC composites showed only a modest decrease in density. Porosity steadily increased in EFC and BFC, whereas a non-linear trend was observed in RPBCC, likely due to its unique morphology and fibrillation. Conversely, EFC exhibited significantly higher maximum fracture toughness (3600 J/m² at 10 wt.%) compared to PBFCC (1600 J/m² at 14 wt.%) and BFC (1400 J/m² at 14 wt.%). This enhancement is attributed to extensive fiber pullout mechanisms and increased energy absorption during crack propagation. Overall, all composite types demonstrated flexural strength values above 4 MPa, placing them in the Grade I category. Those reinforced with 10–14% RPBC exhibited strengths of 11–12 MPa, categorizing them as Grade II according to ASTM C1186-02. Full article

Xylosyltransferase-I (XT-I) plays a crucial role in skeletal development and cartilage integrity. An XT-I deficiency is linked to severe bone disorders, such as Desbuquois dysplasia type 2. While animal models have provided insights into XT-I’s role during skeletal development, its specific effects on adult bone homeostasis, particularly in human mesenchymal stem cell (hMSC) differentiation, remain unclear. This study investigates how XT-I deficiency impacts the differentiation of hMSCs into chondrocytes, osteoblasts, and adipocytes—key processes in bone formation and repair. The aim of this study was to elucidate for the first time the molecular mechanisms by which XT-I deficiency leads to impaired bone homeostasis. Using CRISPR-Cas9-mediated gene editing, we generated XYLT1 knockdown (KD) hMSCs to assess their differentiation potential. Our findings revealed significant disruption in the chondrogenic differentiation in KD hMSCs, characterized by the altered expression of regulatory factors and extracellular matrix components, suggesting premature chondrocyte hypertrophy. Despite the presence of perilipin-coated lipid droplets in the adipogenic pathway, the overall leptin mRNA and protein expression was reduced in KD hMSCs, indicating a compromised lipid metabolism. Conversely, osteogenic differentiation was largely unaffected, with KD and wild-type hMSCs exhibiting comparable mineralization processes, indicating that critical aspects of osteogenesis were preserved despite the XYLT1 deficiency. In summary, these results underscore XT-I’s pivotal role in regulating differentiation pathways within the bone marrow niche, influencing cellular functions critical for skeletal health. A deeper insight into bone biology may pave the way for the development of innovative therapeutic approaches to improve bone health and treat skeletal disorders. Full article

Colorectal surgery has undergone significant advances over the past few decades, driven by the evolution of minimally invasive techniques, particularly laparoscopy and robotics. While laparoscopy is widely recognized for its short-term benefits and oncological safety, the increasing adoption of robot-assisted surgery (RAS) has generated considerable debate regarding its clinical benefits, economic implications, and overall impact on patient outcomes. This narrative review synthesizes the existing evidence, highlighting the clinical and economic aspects of RAS in colorectal surgery, while exploring areas for future research. The findings suggest that RAS offers potential technical advantages, including increased precision, three-dimensional visualization, and improved ergonomics, particularly in anatomically complex scenarios such as low rectal resections. Still, its superiority over laparoscopy remains inconclusive and current evidence is mixed. For colon cancer, meta-analyses and analyses of large cohorts suggest lower conversion rates and faster recovery with RAS, although data are mostly retrospective and lack long-term oncological endpoints. In rectal cancer, emerging evidence from randomized controlled trials demonstrates improved short-term outcomes. Additionally, the recently published three-year results of the REAL trial are the first to demonstrate enhanced oncological outcomes following RAS. However, findings remain inconsistent due to methodological heterogeneity, the absence of patient stratification, and limited data on long-term survival and cost-effectiveness. The available evidence indicates that RAS may offer advantages in selected patient populations, particularly for anatomically complex procedures. Yet, its overall utility remains uncertain. Future studies should emphasize high-quality randomized trials, stratified subgroup analyses, and standardized economic evaluations to better define the role of RAS in colorectal surgery. Full article

Pyrolysis technology currently serves as a significant method for recycling and reducing waste tires. In this paper, in order to improve the heat transfer efficiency during the pyrolysis of waste tires in a horizontal rotary furnace and the yield of pyrolysis oil, the effect laws of tire particle size, rotary furnace rotation speed, enhanced heat transfer materials, and adding spiral fins on heat transfer performance and pyrolysis product distribution were studied, respectively. The innovation lies in two aspects: first, aiming at the problems of slow heat transfer and low pyrolysis efficiency in horizontal rotary furnaces, we identified technical measures through experiments to enhance heat transfer, thereby accelerating pyrolysis and reducing energy consumption; second, with the goal of increasing high-value pyrolysis oil yield, we determined optimal operating parameters to improve economic and sustainability outcomes. The results showed that powdered particles of waste tires were heated more evenly during the pyrolysis process, which increased the overall heat transfer coefficient and the proportion of liquid products. When the rotational speed of the rotary pyrolysis furnace exceeded 2 rpm, there was sufficient contact between the material and the furnace wall, which was beneficial to the improvement of heat transfer performance. Adding heat transfer enhancement materials such as carborundum and white alundum could improve the heat transfer performance between the pyrolysis furnace and the material. Notably, a rotational speed of 3 rpm and carborundum were used as a heat transfer enhancement material with powdered waste tire particles during the pyrolysis process; the overall heat transfer coefficient was the highest, which was 16.89 W/(m²·K), and the proportion of pyrolysis oil products was 46.1%. When spiral fins were installed, the comprehensive heat transfer coefficient was increased from 12.78 W/(m²·K) to 16.32 W/(m²·K). The experimental results show that by increasing the speed of the pyrolysis furnace, adding heat transfer enhancing materials with high thermal conductivity to waste tires, and appropriate particle size, the heat transfer performance and pyrolysis rate can be improved, and energy consumption can be reduced. Full article

Background: Type 2 diabetes (T2D) has been placed among the risk factors for fragility (osteoporotic) fractures, particularly in menopausal women amid modern clinical practice. Objective: We aimed to analyze the bone status in terms of mineral metabolism assays, blood bone turnover markers (BTM), and bone mineral density (DXA-BMD), respectively, to assess the 10-year fracture probability of major osteoporotic fractures (MOF) and hip fracture (HF) upon using conventional FRAX without/with femoral neck BMD (MOF-FN/HF-FN and MOF+FN/HF+FN) and the novel model (FRAXplus) with adjustments for T2D (MOF+T2D/HF+T2D) and lumbar spine BMD (MOF+LS/HF+LS). Methods: This retrospective, cross-sectional, pilot study, from January 2023 until January 2024, in menopausal women (aged: 50–80 years) with/without T2D (group DM/nonDM). Inclusion criteria (group DM): prior T2D under diet ± oral medication or novel T2D (OGTT diagnostic). Exclusion criteria: previous anti-osteoporotic medication, prediabetes, insulin therapy, non-T2D. Results: The cohort (N = 136; mean age: 61.36 ± 8.2y) included T2D (22.06%). Groups DM vs. non-DM were age- and years since menopause (YSM)-matched; they had a similar osteoporosis rate (16.67% vs. 23.58%) and fracture prevalence (6.66% vs. 9.43%). In T2D, body mass index (BMI) was higher (31.80 ± 5.31 vs. 26.54 ± 4.87 kg/m²; p < 0.001), while osteocalcin and CrossLaps were lower (18.09 ± 8.35 vs. 25.62 ± 12.78 ng/mL, p = 0.002; 0.39 ± 0.18 vs. 0.48 ± 0.22 ng/mL, p = 0.048), as well as 25-hydroxyvitamin D (16.96 ± 6.76 vs. 21.29 ± 9.84, p = 0.013). FN-BMD and TH-BMD were increased in T2D (p = 0.007, p = 0.002). MOF+LS/HF+LS were statistically significant lower than MOF-FN/HF-FN, respectively, MOF+FN/HF+FN (N = 136). In T2D: MOF+T2D was higher (p < 0.05) than MOF-FN, respectively, MOF+FN [median(IQR) of 3.7(2.5, 5.6) vs. 3.4(2.1, 5.8), respectively, 3.1(2.3, 4.39)], but MOF+LS was lower [2.75(1.9, 3.25)]. HF+T2D was higher (p < 0.05) than HF-FN, respectively, HF+FN [0.8(0.2, 2.4) vs. 0.5(0.2, 1.5), respectively, 0.35(0.13, 0.8)] but HF+LS was lower [0.2(0.1, 0.45)]. Conclusion: Type 2 diabetic menopausal women when compared to age- and YSM-match controls had a lower 25OHD and BTM (osteocalcin, CrossLaps), increased TH-BMD and FN-BMD (with loss of significance upon BMI adjustment). When applying novel FRAX model, LS-BMD adjustment showed lower MOF and HF as estimated by the conventional FRAX (in either subgroup or entire cohort) or as found by T2D adjustment using FRAXplus (in diabetic subgroup). To date, all four types of 10-year fracture probabilities displayed a strong correlation, but taking into consideration the presence of T2D, statistically significant higher risks than calculated by the traditional FRAX were found, hence, the current model might underestimate the condition-related fracture risk. Addressing the practical aspects of fracture risk assessment in diabetic menopausal women might improve the bone health and further offers a prompt tailored strategy to reduce the fracture risk, thus, reducing the overall disease burden. Full article

Since the start of the energy crisis in 2020, the Dutch government has introduced various programmes aimed at alleviating energy poverty among low-income households. This research examines the effects of three specific interventions—energy coaching, home renovations, and white goods schemes—on a range of energy poverty-related aspects, including living comfort, physical and mental health, energy costs, financial concerns, social connection, neighbourhood involvement, and sustainable behaviour. While previous studies have mostly investigated these interventions in isolation, this research offers a comparative analysis to explore how their impacts differ and how they may complement one another. This research, comparing an intervention group and control, shows that energy coaches, renovations, and white goods schemes each have positive effects on various aspects of energy poverty. However, the nature and magnitude of these effects differ by type of support measure. Renovations are the most effective overall, significantly improving living comfort, physical health, and reducing energy costs. White goods schemes primarily reduce moisture and mould in dwellings and have a notable positive impact on mental health. Energy coaches contribute to improved living comfort, lower energy costs, and uniquely enhance community involvement. The complementary nature of these interventions highlights the potential added value of integrated or combined approaches to tackling energy poverty. Full article

Sexual consent is one of the most important tools used in the prevention of sexual violence, for which adolescents are especially vulnerable. However, it is unclear how sexual consent processes are defined and used by this population. To bridge this gap in knowledge, this scoping review sought to identify and synthesize the existing empirical research findings on sexual consent conceptualizations and processes among adolescents, as well as determine critical gaps in knowledge. Forty-three articles were reviewed following a systematic search of six academic databases. Articles were included if they were original empirical work published in English between January 1990 and March 2020, included adolescents aged 10 to 17 in their sample, and specifically studied sexual consent conceptualization, communication, and/or behavior. Seventeen articles, diverse in study design and geography, met these criteria and were analyzed. The findings suggest a propensity for adolescents to abstractly define sexual consent as verbal and direct in nature while simultaneously espousing indirect and non-verbal behavioral processes when presented with “real life” scenarios (e.g., vignettes, reflections on personal experience). In addition, the results reveal the significance of concepts like gender norms, normative refusals, and silence as key aspects of adolescent sexual consent. This review demonstrates that research on sexual consent among adolescents is highly limited overall, and the findings that are available indicate some concerning perceptions. Full article

Microfluidic methods are an important tool for studying the microrheology of blood and the mechanical properties of blood cells—erythrocytes, leukocytes, and platelets. In patients with diabetes, hypertension, obesity, sickle cell anemia, or cerebrovascular or peripheral vascular diseases, hemorheological alterations are commonly observed. These include increased blood viscosity and red blood cell (RBC) aggregation, along with reduced RBC deformability. Such disturbances significantly contribute to impaired microcirculation and microvascular perfusion. In blood vessels, abnormal hemorheological parameters can elevate resistance to blood flow, exert greater mechanical stress on the endothelial wall, and lead to microvascular complications. Among these parameters, erythrocyte deformability is a potential biomarker for diseases including diabetes, malaria, and cancer. This review highlights recent advances in microfluidic technologies for in vitro assays of RBC deformability and aggregation, as well as leukocyte aggregation and adhesion. It summarizes the core principles of microfluidic platforms and the experimental findings related to hemodynamic parameters. The advantages and limitations of each technique are discussed, and future directions for improving these devices are explored. Additionally, some aspects of the modeling of the microrheological properties of blood cells are considered. Overall, the described microfluidic systems represent promising tools for investigating erythrocyte mechanics and leukocyte behavior. Full article

Evaluating the approach of the apple’s maturity is a crucial aspect of enhancing agricultural efficiency, especially in the context of harvesting. Traditional approaches depend on fixed criteria that fail to account for the natural growth conditions of the fruit. To address this limitation, a fuzzy logic-based system was introduced to evaluate apple ripeness. This model highlights a notable disparity between these factors and maturity. It incorporates the essential elements anticipated to correlate with ripeness, while maintaining the integrity of the inputs to create a holistic framework for assessing maturity. This system ensures that apples are harvested at the optimal time, thereby improving their overall quality. Full article

This study evaluated how the summer circulation pattern in the Southern Gulf of California influences copepod communities. The evaluation was based on hydrographic data and zooplankton samples collected during a multidisciplinary research cruise conducted in June and July of 2019. The results revealed the presence of a cyclonic circulation with a diameter of approximately 100 km, located near the entrance of the Gulf, affecting the upper 200 m layer. A total of 30 copepod species were identified, including 20 from the order Calanoida and 10 from Cyclopoida. The most abundant Calanoida species were Canthocalanus pauper, Clausocalanus furcatus, and Subeucalanus subcrassus, with respective densities of 2316.80, 1593.60, and 1584.64 ind m⁻³. The most abundant Cyclopoida species were Oithona setigera, Dioithona rigida, and Oncaea venusta, which had densities of 963.44, 290.56, and 235.52 ind m⁻³, respectively. The horizontal distribution of these species showed variations influenced by the cyclonic circulation. Specifically, low abundance values were observed at the center of cyclonic circulation, while higher values were found at its periphery. This pattern was consistent among the dominant species, indicating that they do not benefit from the cold subsurface waters induced by circulation. In fact, the distribution of some species was higher in a band of warm water located in the eastern portion of the study area. Overall, our findings shed light on how the summer cyclonic circulation in the Southern Gulf of California affects the copepod community, an aspect that has not been previously explored. This research enhances our understanding of the processes influencing this group of organisms in a highly dynamic environment. Full article

Historical districts are the mark of the continuity of urban history and are non-renewable. Typhoon disasters rank among the most serious and frequent natural threats to China’s coastal regions. Improving the wind resilience of China’s coastal historical districts is of great significance for their protection and inheritance. Accurately analyzing the different characteristics of the influencing factors of wind resilience in China’s coastal historical districts can provide a theoretical basis for alleviating the damage caused by typhoons and formulating disaster prevention measures. This paper accurately identifies the main influencing factors of wind resilience in China’s coastal historical districts and constructs an influencing factor system from four aspects: block level, building level, typhoon characteristics, and emergency management. An IIM model for the systematic analysis of influencing factors of wind resilience in China’s coastal historical districts based on the Improved Decision Making Trial and Evaluation Laboratory (IDEMATEL), Interpretive Structural Modeling (ISM), and Matrices Impacts Croises-Multiplication Appliance Classement (MICMAC) methods is established. This allows us to explore the mechanism of action of internal influencing factors of typhoon disasters and construct an influencing factor system, in order to propose prevention measures from the perspective of typhoon disaster characteristics and the overall perspective of China’s coastal historical districts. The results show that the driving force of a building’s windproof design in China’s coastal historical districts is low, but its dependence is strong; the driving forces of block morphology, typhoon level, and emergency plan are strong, but their dependence is low. A building’s windproof design is a direct influencing factor of the wind resilience of China’s coastal historical districts; block morphology, typhoon level, and emergency plan are the most fundamental and key influencing factors of the wind resilience of China’s coastal historical districts. Full article

The spatial genes of rural settlements show a lot of different traditional settlement traits, which makes them a great starting point for studying rural spatial morphology. However, qualitative and macro-regional statistical indicators are usually used to find and extract rural settlement spatial genes. Taking Yubei Village in the Nanxi River Basin as an example, this study combined remote sensing images, real-time drone mapping, GIS (geographic information system), and space syntax, extracted 12 key indicators from five dimensions (landform and water features (environment), boundary morphology, spatial structure, street scale, and building scale), and quantitatively “decoded” the spatial genes of the settlement. The results showed that (1) the settlement is a “three mountains and one water” pattern, with cultivated land accounting for 37.4% and forest land accounting for 34.3% of the area within the 500 m buffer zone, while the landscape spatial diversity index (LSDI) is 0.708. (2) The boundary morphology is compact and agglomerated, and locally complex but overall orderly, with an aspect ratio of 1.04, a comprehensive morphological index of 1.53, and a comprehensive fractal dimension of 1.31. (3) The settlement is a “clan core–radial lane” network: the global integration degree of the axis to the holy hall is the highest (0.707), and the local integration degree R3 peak of the six-room ancestral hall reaches 2.255. Most lane widths are concentrated between 1.2 and 2.8 m, and the eaves are mostly higher than 4 m, forming a typical “narrow lanes and high houses” water town streetscape. (4) The architectural style is a combination of black bricks and gray tiles, gable roofs and horsehead walls, and “I”-shaped planes (63.95%). This study ultimately constructed a settlement space gene map and digital library, providing a replicable quantitative process for the diagnosis of Jiangnan water town settlements and heritage protection planning. Full article

Additive manufacturing (AM), particularly laser powder bed fusion (L-PBF), provides unmatched design flexibility for creating intricate steel structures with minimal post-processing. However, adopting L-PBF for high-performance applications is difficult due to the challenge of predicting microstructure evolution. This is because the process is sensitive to many parameters and has a complex thermal history. Thin-walled geometries present an added challenge because their dimensions often approach the scale of individual grains. Thus, microstructure becomes a critical factor in the overall integrity of the component. This study focuses on applying cellular automata (CA) modeling to establish robust and efficient process–structure relationships in L-PBF of 316L stainless steel. The CA framework simulates solidification-driven grain evolution and texture development across various processing conditions. Model predictions are evaluated against experimental electron backscatter diffraction (EBSD) data, with additional quantitative comparisons based on texture and morphology metrics. The results demonstrate that CA simulations calibrated with relevant process parameters can effectively reproduce key microstructural features, including grain size distributions, aspect ratios, and texture components, observed in thin-walled L-PBF structures. This work highlights the strengths and limitations of CA-based modeling and supports its role in reliably designing and optimizing complex L-PBF components. Full article